Error in IR Namespace is not defined in the software component version

Hi All,
Please provide your valuable inputs to resolve the issue.
Namespace http://xxx.com is not defined in the software component version xxx_xxxxxx , 1.0 of xxx.com
Though the software component was already created in SLD and imported.All the developers were able to access the software component and create the Namespaces for their scenarios, but when tried to Activate the scenario above mentioned error is displayed.
Below are the checks done.
1.In Exchange Profile checked the properties,
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
2. Tried to import the software components once again through IR -- No results
3. Restarted the Java Engine through SMICM -- No results
4.Performed the SLDCHECK no errors.
Inputs please at the earliest
Regards
Shiva.

Hi Jochen,
This is occuring due to that the created namespace is not getting activated. As mentioned in earlier replies that if you have copied objects from somewhere else then all the related information should also be copied. If the problem resists then you can create all the needed objects in IR again and activate it separately instead of activating all at once.
Regards,
Subhasha

Similar Messages

ReferenceError: Error #1065: Variable @namespace is not defined.

I am using FB4 but SDK 3.5. I created a webservice to call a webservice by .Net. The related codes are listed below
<mx:WebService id="ws"   wsdl="{URL_WSDL2}" fault="wsHandleFault(event)" useProxy="false" >
<mx:operation name="GetDistrict"
   resultFormat="object"
   result="GetDistrict(event)" />
<mx:operation name="GetStates"
   resultFormat="object"
   result="GetStates(event)" />
</mx:WebService>
private function LoadData():void {;
ws.getOperation("GetDistrict").send();
ws.getOperation("GetStates").send();
btnLoad.enabled = false;
However, I got runtime error:
ReferenceError: Error #1065: Variable @namespace is not defined.
at mx.rpc.xml::SchemaLoader/schemaImports()
at mx.rpc.wsdl::WSDLLoader/schemaImports()
at mx.rpc.wsdl::WSDLLoader/resultHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at HTTPOperation/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()
at mx.rpc::Responder/result()
at mx.rpc::AsyncRequest/acknowledge()
at DirectHTTPMessageResponder/completeHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
I really don't know how to fix it. Wish someone can share his/her experience. Thanks.

When creating a Web Service in .NET, specifically a WCF based Web Service, the auto generated code tends to have an empty namespace (for you to fill). If you specify a namespace for the service contract and behavior this tends to resolve the Flex issue.
e.g. in your .NET service or service interface code you can specify them as attributes and would look something like:
' VB
Imports System.ServiceModel
<ServiceContract(Namespace:="http://somedomain.com")>
<ServiceBehavior(Namespace:="http://somedomain.com")>
Public Class MyWebService
// C#
using System.ServiceModel;
[ServiceContract(Namespace:="http://somedomain.com")]
[ServiceBehavior(Namespace:="http://somedomain.com")]
public class MyWebService
Hope that helps someone!
(I realise this post is a bit old, but shows up high in Google for the error message, so have posted for the benefit of anyone finding it)

Could not read list of software component versions

Hi,
I am trying to import software components from sld into esr. When i click on display available components i get the error :
Could not read list of software component versions
The details show:
Could not read list of software component versions
from SLD (COULD_NOT_READ_SWCV)
HTTP response code: 403 (Forbidden)
we were initially getting access issue also in details, but that has been rectified by assigning appropriate roles.\
Kindly help.

Hi,
Use t-code SLDCHECK on ABAP stack to confirm the connection of XI system and SLD.
Check whether SLD and XI system are on same server. Refer to OSS note - 720717 to integrate XI with other SLD.
In the Integration Builder page, Click on the Administration and check the following parameters to make sure they are pointing to right SLD system and port.
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
GreatDay,
venkatagiri
Edited by: Giriii on Sep 15, 2011 8:14 AM

Namespace not defined in the SWCV error

Hi Experts ,
I am new to PI.
I am executing one IDOC to IDOC scenario for MATMAS05.
I have done all the source side, integartion server and destination side server configuration.
Source:SAP R/3 server
Int server:PI
Destination : SAP ECC 5.0
I have imported the MATMAS05 IDOC.
Created one name space under my predefined SWCV.
Then i copied that IDOC to both the source and destination in message mapping.And map all the red mark required filed of the target with source.
While activating the message mapping I am getting one error.
Namespace http://piidcoctoidoc is not defined in the software component version MANISHASC2 , 1.1 of manisha.co
and
Mapping not sufficiently defined
Can anybody help me how to resolve this?
Thanks
Manisha

hi Manisha
while activating the objects which you have created , you must be getting this error\
so while activeting the object select your Software component also and activate both then you will not be getting the error
becuase every time you generate a namespace in any software component then you need to activate the software compnent along with the object
if you left SWC and activating only the object then you must be getting this error.
for activating any objevt your software component must be activated first
what you must be doing ,,,,,, you are activating only the object and not your software component
so activete both first your software component and then your object
Thanks
sandeep
If helpful reward points
Edited by: sandeep sharma on May 16, 2008 1:04 PM

Error Infosource is not defined in the source system

I am extracting data into ODS. It was running perfectly till now. But today i am getting this error.and for all packages i run. whether it is transaction data or master data.
I replicated the DataSource and activated all the objects and transfer structure.but still getting the same error.
I even created a new DataSource and infosource but still the error persists. please help me in this matter.
Thanks

the data is extracted from BW system itself (Self System).
there are three tables linked to each other.I have created an infoset query and creted datasource on that infoset query.
the source system is the same bw system.
The detailed error report is -
InfoSource is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing .

InfoSource 8ODS_SLS is not defined in the source system

Hi Guys,
    When I tried to load data from ODS to Infocube, I am getting the following error.
InfoSource 8ODS_SLS is not defined in the source system
      Source System is not R/3. It is just a flat file and data was uploaded into ODS. When transferring the data from ODS to Infocube, I get this problem. And I have defined the update rules for infocube and also given the infosource name as ODS.
      But the data is not getting uploaded in the Infocube.

First replicate your BWSELF system.
Then, Run this program in SE38:
rs_transtru_activate_all
Enter the source system (your BW system)
Enter the datasource (8ODS_SLS).
If you get an error message immediately, the datasource doesn't exist. If it runs, check and make sure you get no error messages.
/smw

Field in structure 'is not defined in the ABAP Dictionary'

Hi,
I have created an Infoset (SQ01) based on an external program and structure.
These two things are required.
However when I try to generate my Infoset I get an error message for each element in the structure I created in SE11.
The error is:
"<structure_name-field_name> is not defined in the ABAP Dictionary"
Each element in my structure gives this error yet I have defined this in SE11 as a structure and activated it.
These elements are included in my Infoset and as a field group in the infoset.
Has anyone come across this error before and knows how to resolve this problem?
Many Thanks
David

Hey,
I got the same prb.
Just reset the text buffers.
Rgds,
Martin

InfoSource 80FIAR_O03 is not defined in the source system

Hello,
I am facing one issue while running process chain in Test client.
Isssue: 0FI_AR_4 process chain loading to ODS successfull. the next step in process chain is further update. data is goint to cube. error getting u201CInfoSource 80FIAR_O03 is not defined in the source system.u201D i have replicated the DS and activated 3-4 times also ran progam also. but still getting same error message. i deleted data from cube. In productio its running fine.
currently client is updating ECC 6.0 system
what could be root cause?
Thanks in advance
CPY

Hi,
Can you please check this thread :
Re: InfoSource 80FIAR_O03 is not defined in the source system
Cheers,
Tanish.

I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG ‏36 KB

other PNG
Attachments:
Broken Arrow on EXE.PNG ‏179 KB

Can not view a Software Component Version in Enterprise Services Repository

Hello,
I'm trying to import in ESR the software component version created in the SLD. I'm using SAP PI 7.3.
Into to work area select Software Component Version and click on checkpoint Import from SLD. Click in bottom Display (List of Software Component Versions) and it show me the list but cannot view the Name of the SWC created.
I cleared the cache (Environment - clear sld data cache) and the result it's the same, not show the SWC the I created.
Do you have any idea?
Thank you in advance.
--erva

Hi,
as it's a new installation, you certainly missed something. have you did controls of Readiness Check doc and tcode SLDCHECK ([see PI 7.1x oss note|https://service.sap.com/sap/support/notes/1143810]).
and check these post installation controls (but it's for PI 7.1): [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e?QuickLink=index&overridelayout=true]
Mickael

Some Software Component Versions do not show up in transaction sproxy

I have a landscape with a CRM system, a PI system (with the SLD on it) and some other systems.
In transaction sproxy in the CRM system the Software Component Version SAP CRM ABAP 7.0 shows up, but others that should be there like SAP ABA 7.01 are not there.
So I went on the SLD and edited the technical system for the CRM system, I added the product SAP CRM 7.00 and set the checkmark for installed for the relevant SWCVs like SAP ABA 7.01.
I then went to the business system for the relevant CRM client and there also checked those SWCVs.
But still they do not show up in transaction sproxy in the CRM system.
What am I missing?

Hi Monika,
There's several suggestions that you could look at to help resolve your problem in this thread:
[Can't find ESA ECC-SE 603 SWCV;
Regards, Trevor

Error G/L Account is not defined in Chart of Account INT

Hi,
I have create a company code by doing copy of SG01 in transaction EC01.
I have also create a vendor under the newly created company code. When i try to do a testing in FB60 transaction it prompt me an error : G/L Account is not defined in Chart of Account INT.
Did i miss out anything? How to resolve this issue?
Best Regards,
Rayden

Hi Supriya,
I have check the T-Code FSP0. It display as follow. it seem that the Chart of Account INT is there.
[FSP0 Screenshot|http://i154.photobucket.com/albums/s248/evil_lord81/Untitled-1.jpg]
Regards,
Rayden
Edited by: Rayden on Feb 25, 2008 3:05 PM
Edited by: Rayden on Feb 25, 2008 3:06 PM

Swf-version can be specified when using SDK 3.6? [ Error #1065: Variable JSON is not defined ]

I've been using playerglobal.swc of flash player 11 and SDK 3.6.
ReferenceError: Error #1065: Variable JSON is not defined
can be solved by setting -swf-version to 13. (http://forums.adobe.com/message/3933620#3933620)
However, swf-version is not available in SDK 3.6.
Can native JSON be used?
Otherwise, can com.adobe.serialization.json.JSON be used without name conflict?
JSON (from ...\flex_sdk_3.6\frameworks\libs\player\11\playerglobal.swc(JSON))
com.adobe.serialization.json:JSON (from ...\as3corelib.swc(com/adobe/serialization/json/JSON))

anyone know the answer to this?
how are we supposed to use the new player features with using the 3.x SDK?

Please help! ReferenceError: Error #1065: Variable tracker is not defined.

Hi guys im tearing my hair out over this, sorry if its an extreme noob question but i know its quite a common problem and im sure someone on here must be able to help.
After debugging my project here is the error message -
ReferenceError: Error #1065: Variable tracker is not defined.
          at CustomsConnect/buttonClick()[C:\Users\LiamT\Desktop\plz\CustomsConnect\CustomsConnect.as: 443]
          at flash.events::EventDispatcher/dispatchEventFunction()
          at flash.events::EventDispatcher/dispatchEvent()
          at shell::Button/buttonClick()[C:\Users\LiamT\Desktop\plz\CustomsConnect\shell\Button.as:47]
Please let me know if you can point me in the right direction here - the problem has come about as I have inherited a .fla that has been set up on another machine. If you need me to post any of the code that its referring to above let me know.
Thanks in advance for any help that you can offer me.

CustomsConnect is the designated document class.    Tracker is relating to my google analytics tracker as far as I can see it is already defined and perhaps this line of code could be something to do with the problem
Line 77:   private var tracker: GATracker;
Do you want me to post up the rest of the code?
thankyou so much Ned for taking the time out to help me with this.
Many thanks
Liam

Exception fault: ReferenceError: Error #1065: Variable ::_fileSystemType is not defined. - ?

Hi! I'm stuck with debugging our AIR Application since it does crash very hard. After days of tracking down at least one point where the app crashes on AIR 3.5, 3.7 and AIR 3.8 beta (you see - I tried...).
AIR 3.5 finally reports this console output:
ScrollerTouch.onTargetMouseDown()-F true // A
ScrollerTouch.onTargetMouseDown()-I // B
targetV [object ScrollPane] // C
CRASH! // D
Exception fault: ReferenceError: Error #1065: Variable ::_fileSystemType is not defined.
          at global/trace()[int:49]
          at de.superclass.control::ScrollerTouch/onTargetMouseDown()[/path/to/.../ScrollerTouch.as:381]
          at de.superclass.control::ScrollerTouch/onTargetMouseDown()
The code snipped:
trace("ScrollerTouch.onTargetMouseDown()-F", _scrollHorizontal ); // A
switch ( _scrollPolicyVertical )
case ScrollPolicy.ON:
trace("ScrollerTouch.onTargetMouseDown()-G");
_scrollVertical = true;
                                        break;
case ScrollPolicy.OFF:
trace("ScrollerTouch.onTargetMouseDown()-H");
_scrollVertical = false;
                                        break;
case ScrollPolicy.AUTO:
trace("ScrollerTouch.onTargetMouseDown()-I"); // B
default:
                                                  trace( "targetV", targetV ); // C
                                                  try
                                                            trace( "targetV.height", targetV.height );
                                                  catch( e: Error )
                                                            trace( "CRASH!" ); // D
                                                  _scrollVertical = Boolean( targetV.height < targetV.contentHeight ); // line 381
trace( "targetV.xxx" );
                                                  trace( "targetV.contentHeight", targetV.contentHeight );
return;
So accessing targetV.height somehow crashes very hard (app quits) but I have no clue at all. Actually, this code worked for a long time...
So please, what is ::_fileSystemType ?

I changed the code again but the app keeps crashing. This is what XCode-Console says:
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Notice>: Formulating crash report for process APP_NAME[1191]
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jul 4 21:25:48 iRad-3 com.apple.launchd[1] (UIKitApplication:APP_NAME_SPACE[0x469][1191]) <Warning>: (UIKitApplication:APP_NAME_SPACE[0x469]) Job appears to have crashed: Segmentation fault: 11
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: Application 'UIKitApplication:APP_NAME_SPACE[0x469]' exited abnormally with signal 11: Segmentation fault: 11
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Notice>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/APP_NAME_2013-07-04-212547_iRad-3.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0
Jul 4 21:25:55 iRad-3 kernel[0] <Debug>: launchd[1207] Builtin profile: container (sandbox)
Jul 4 21:25:55 iRad-3 kernel[0] <Debug>: launchd[1207] Container: /private/var/mobile/Applications/CDA04278-5D34-4609-BE71-D66FB16794C1 (sandbox)
Jul 4 21:25:56 iRad-3 kernel[0] <Debug>: launchd[1208] Builtin profile: PasteBoard (sandbox)
Jul 4 21:25:56 iRad-3 backboardd[26] <Warning>: CoreAnimation: updates deferred for too long
Jul 4 21:25:56 iRad-3 backboardd[26] <Warning>: CoreAnimation: timed out fence 2685b
And here's the Crash Log:
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Notice>: Formulating crash report for process APP_NAME[1191]
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: BKSendGSEvent ERROR sending event type 3001: (ipc/send) invalid destination port (0x10000003)
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
Jul 4 21:25:48 iRad-3 com.apple.launchd[1] (UIKitApplication:APP_NAME_SPACE[0x469][1191]) <Warning>: (UIKitApplication:APP_NAME_SPACE[0x469]) Job appears to have crashed: Segmentation fault: 11
Jul 4 21:25:48 iRad-3 backboardd[26] <Warning>: Application 'UIKitApplication:APP_NAME_SPACE[0x469]' exited abnormally with signal 11: Segmentation fault: 11
Jul 4 21:25:48 iRad-3 ReportCrash[1206] <Notice>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/APP_NAME_2013-07-04-212547_iRad-3.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0
Jul 4 21:25:55 iRad-3 kernel[0] <Debug>: launchd[1207] Builtin profile: container (sandbox)
Jul 4 21:25:55 iRad-3 kernel[0] <Debug>: launchd[1207] Container: /private/var/mobile/Applications/CDA04278-5D34-4609-BE71-D66FB16794C1 (sandbox)
Jul 4 21:25:56 iRad-3 kernel[0] <Debug>: launchd[1208] Builtin profile: PasteBoard (sandbox)
Jul 4 21:25:56 iRad-3 backboardd[26] <Warning>: CoreAnimation: updates deferred for too long
Jul 4 21:25:56 iRad-3 backboardd[26] <Warning>: CoreAnimation: timed out fence 2685b
And here's the Crash Log:
Incident Identifier: 17615510-16A5-43B9-B8A5-2ED2C5A2EEBA
CrashReporter Key:   3f85661334bfff23c2d4128bc63674d30647c15b
Hardware Model:      iPad3,3
Process:         APP_NAME [1191]
Path:            /var/mobile/Applications/CDA04278-5D34-4609-BE71-D66FB16794C1/APP_NAME.app/APP_NAME
Identifier:      APP_NAME
Version:         ??? (???)
Code Type:       ARM (Native)
Parent Process: launchd [1]
Date/Time:       2013-07-04 21:25:47.935 +0200
OS Version:      iOS 6.1.3 (10B329)
Report Version: 104
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x4095e008
Crashed Thread: 0
Thread 0 name: Dispatch queue: com.apple.main-thread
Thread 0 Crashed:
0   APP_NAME        0x008c71c8 0x1000 + 9200072
1   APP_NAME        0x005284ac 0x1000 + 5403820
2   APP_NAME        0x007b5edc 0x1000 + 8081116
3   APP_NAME        0x00002928 0x1000 + 6440
4   APP_NAME        0x0045f128 0x1000 + 4579624
5   APP_NAME        0x0045f5f8 0x1000 + 4580856
6   APP_NAME        0x0045eeb4 0x1000 + 4578996
7   APP_NAME        0x0045eab4 0x1000 + 4577972
8   APP_NAME        0x003d98d8 0x1000 + 4032728
9   APP_NAME        0x003c59c0 0x1000 + 3951040
10 APP_NAME        0x00443d24 0x1000 + 4468004
11 APP_NAME        0x009d5448 0x1000 + 10306632
12 APP_NAME        0x009d509c 0x1000 + 10305692
13 APP_NAME        0x009d4ad0 0x1000 + 10304208
14 APP_NAME        0x009d6618 0x1000 + 10311192
15 APP_NAME        0x00cf4d40 0x1000 + 13581632
16 APP_NAME        0x00a5f418 0x1000 + 10871832
17 APP_NAME        0x008d810c 0x1000 + 9269516
18 APP_NAME        0x009b45ac 0x1000 + 10171820
19 APP_NAME        0x009b5140 0x1000 + 10174784
20 UIKit                         0x347ff51e -[UIWindow _sendTouchesForEvent:] + 314
21 UIKit                         0x347ec7fc -[UIApplication sendEvent:] + 376
22 UIKit                         0x347ec116 _UIApplicationHandleEvent + 6150
23 GraphicsServices              0x364e05a0 _PurpleEventCallback + 588
24 GraphicsServices              0x364e01ce PurpleEventCallback + 30
25 CoreFoundation                0x329b9170 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION__ + 32
26 CoreFoundation                0x329b9112 __CFRunLoopDoSource1 + 134
27 CoreFoundation                0x329b7f94 __CFRunLoopRun + 1380
28 CoreFoundation                0x3292aeb8 CFRunLoopRunSpecific + 352
29 CoreFoundation                0x3292ad44 CFRunLoopRunInMode + 100
30 GraphicsServices              0x364df2e6 GSEventRunModal + 70
31 UIKit                         0x348402fc UIApplicationMain + 1116
32 APP_NAME        0x008f5c0c 0x1000 + 9391116
33 APP_NAME        0x00d2b0e0 0x1000 + 13803744
Thread 1 name: Dispatch queue: com.apple.libdispatch-manager
Thread 1:
0   libsystem_kernel.dylib        0x3ad76648 kevent64 + 24
1   libdispatch.dylib             0x3aca6974 _dispatch_mgr_invoke + 792
2   libdispatch.dylib             0x3aca6654 _dispatch_mgr_thread$VARIANT$mp + 32
Thread 2 name: WebThread
Thread 2:
0   libsystem_kernel.dylib        0x3ad75eb4 mach_msg_trap + 20
1   libsystem_kernel.dylib        0x3ad76048 mach_msg + 36
2   CoreFoundation                0x329b9040 __CFRunLoopServiceMachPort + 124
3   CoreFoundation                0x329b7d9e __CFRunLoopRun + 878
4   CoreFoundation                0x3292aeb8 CFRunLoopRunSpecific + 352
5   CoreFoundation                0x3292ad44 CFRunLoopRunInMode + 100
6   WebCore                       0x3891a500 RunWebThread(void*) + 440
7   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
8   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 3:
0   libsystem_kernel.dylib        0x3ad75eb4 mach_msg_trap + 20
1   libsystem_kernel.dylib        0x3ad76048 mach_msg + 36
2   APP_NAME        0x00480b04 0x1000 + 4717316
3   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
4   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 4:
0   libsystem_kernel.dylib        0x3ad8608c __psynch_cvwait + 24
1   libsystem_c.dylib             0x3acd7d2a _pthread_cond_wait + 642
2   libsystem_c.dylib             0x3ace1f14 pthread_cond_wait + 36
3   APP_NAME        0x00a33ad4 0x1000 + 10693332
4   APP_NAME        0x0097d9e0 0x1000 + 9947616
5   APP_NAME        0x00a33938 0x1000 + 10692920
6   APP_NAME        0x00a3398c 0x1000 + 10693004
7   APP_NAME        0x00a336b8 0x1000 + 10692280
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 5:
0   libsystem_kernel.dylib        0x3ad8608c __psynch_cvwait + 24
1   libsystem_c.dylib             0x3acd7d2a _pthread_cond_wait + 642
2   libsystem_c.dylib             0x3ace1f14 pthread_cond_wait + 36
3   APP_NAME        0x00a33ad4 0x1000 + 10693332
4   APP_NAME        0x0097d9e0 0x1000 + 9947616
5   APP_NAME        0x00a33938 0x1000 + 10692920
6   APP_NAME        0x00a3398c 0x1000 + 10693004
7   APP_NAME        0x00a336b8 0x1000 + 10692280
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 6:
0   libsystem_kernel.dylib        0x3ad866a4 __semwait_signal + 24
1   libsystem_c.dylib             0x3ace43ce nanosleep + 138
2   APP_NAME        0x00a33724 0x1000 + 10692388
3   APP_NAME        0x00913638 0x1000 + 9512504
4   APP_NAME        0x009135d8 0x1000 + 9512408
5   APP_NAME        0x00a33938 0x1000 + 10692920
6   APP_NAME        0x00a3398c 0x1000 + 10693004
7   APP_NAME        0x00a336b8 0x1000 + 10692280
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 7:
0   libsystem_kernel.dylib        0x3ad8608c __psynch_cvwait + 24
1   libsystem_c.dylib             0x3acd7d2a _pthread_cond_wait + 642
2   libsystem_c.dylib             0x3acd7aa0 pthread_cond_timedwait + 40
3   APP_NAME        0x00a33b54 0x1000 + 10693460
4   APP_NAME        0x000a7254 0x1000 + 680532
5   APP_NAME        0x00a33938 0x1000 + 10692920
6   APP_NAME        0x00a3398c 0x1000 + 10693004
7   APP_NAME        0x00a336b8 0x1000 + 10692280
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 8:
0   libsystem_kernel.dylib        0x3ad866a4 __semwait_signal + 24
1   libsystem_c.dylib             0x3ace43ce nanosleep + 138
2   APP_NAME        0x00a33724 0x1000 + 10692388
3   APP_NAME        0x008caff0 0x1000 + 9215984
4   APP_NAME        0x008cae08 0x1000 + 9215496
5   APP_NAME        0x00a33938 0x1000 + 10692920
6   APP_NAME        0x00a3398c 0x1000 + 10693004
7   APP_NAME        0x00a336b8 0x1000 + 10692280
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 9 name: com.apple.NSURLConnectionLoader
Thread 9:
0   libsystem_kernel.dylib        0x3ad75eb4 mach_msg_trap + 20
1   libsystem_kernel.dylib        0x3ad76048 mach_msg + 36
2   CoreFoundation                0x329b9040 __CFRunLoopServiceMachPort + 124
3   CoreFoundation                0x329b7d9e __CFRunLoopRun + 878
4   CoreFoundation                0x3292aeb8 CFRunLoopRunSpecific + 352
5   CoreFoundation                0x3292ad44 CFRunLoopRunInMode + 100
6   Foundation                    0x332773d0 +[NSURLConnection(Loader) _resourceLoadLoop:] + 304
7   Foundation                    0x332fae80 __NSThread__main__ + 968
8   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
9   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 10 name: com.apple.CFSocket.private
Thread 10:
0   libsystem_kernel.dylib        0x3ad86594 __select + 20
1   CoreFoundation                0x329bd1f2 __CFSocketManager + 674
2   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
3   libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 11:
0   libsystem_kernel.dylib        0x3ad86d98 __workq_kernreturn + 8
1   libsystem_c.dylib             0x3acd4cf6 _pthread_workq_return + 14
2   libsystem_c.dylib             0x3acd4a12 _pthread_wqthread + 362
3   libsystem_c.dylib             0x3acd48a0 start_wqthread + 4
Thread 12:
0   libsystem_kernel.dylib        0x3ad8608c __psynch_cvwait + 24
1   libsystem_c.dylib             0x3acd7d68 _pthread_cond_wait + 704
2   libsystem_c.dylib             0x3aceb080 pthread_cond_timedwait_relative_np + 12
3   APP_NAME        0x00a7e558 0x1000 + 10999128
4   APP_NAME        0x00a7e200 0x1000 + 10998272
5   APP_NAME        0x00a7e0f8 0x1000 + 10998008
6   APP_NAME        0x00a33938 0x1000 + 10692920
7   APP_NAME        0x00a3398c 0x1000 + 10693004
8   APP_NAME        0x00a336b8 0x1000 + 10692280
9   libsystem_c.dylib             0x3acdf30e _pthread_start + 306
10 libsystem_c.dylib             0x3acdf1d4 thread_start + 4
Thread 13:
0   libsystem_kernel.dylib        0x3ad86d98 __workq_kernreturn + 8
1   libsystem_c.dylib             0x3acd4cf6 _pthread_workq_return + 14
2   libsystem_c.dylib             0x3acd4a12 _pthread_wqthread + 362
3   libsystem_c.dylib             0x3acd48a0 start_wqthread + 4
Thread 0 crashed with ARM Thread State (32-bit):
    r0: 0x4095e000    r1: 0x2fdfdf58      r2: 0x0052844c      r3: 0x2fdfdf1c
    r4: 0x00000221    r5: 0x084d8060      r6: 0x2fdfdf14      r7: 0x2fdfdf88
    r8: 0x2fdfdf20    r9: 0x000003fe     r10: 0x4095e000     r11: 0x00000000
    ip: 0x000002fc    sp: 0x2fdfdf10      lr: 0x005284b0      pc: 0x008c71c8
cpsr: 0x20000010
This immediately occurs when I touch and move a little on a specific display object which listens to Mouse-Events DOWN, MOVE to drag it's contents. I think it has something to do with the event system or so. But I'm absolutely blind I guess.
What could I do?

Error in IR Namespace is not defined in the software component version

Similar Messages

Maybe you are looking for