Error in J1IFQ (SC Challan Reconcilation)

Dear All,
During reconcilation of subcontracting challan using the transaction J1IFQ getting an error message : "Challan material is different from material document"(Message no. 8I572).
i have checked,i entered correct challan number,year and material document of GR done for SC PO.
Can anybody pls explain how to come out of this error? what are the possible resons behind this ?
Reward points are sure.
Regds

hi,
check the number range series...
if u assign the same number range for two plants this error may ocur.
please check.
sri

Similar Messages

  • Problem In Challan Reconcilation J1IFQ

    Dear All,
    I am having a proble in J1IFQ (s/c Challan reconcilation) .
    for two line items in reconcilation screen system is not updating the qty at the header level for second item.
    copying the qty of first item only
    why ,Is anybody gone through this problem?
    regards,
    sujit

    Hai,
    If a particular challan has a same material for both the line item then in J1IFQ the system will update the first line fully, then it goes to the second line.
    But the challan has different material then automatically the system reconcile the particular material.
    Asok.N

  • Subcontracting challan reconcilation & re credit

    Hi,
    Please suggest me about Subcontracting challan reconcilation & re credit in case material is recieved after 180 days. how challan is handled & regarding credit what needs to be done.
    We can reverse challan & reconcile using j1ifq but what steps to be followed in case of paying excise amount.

    Hi,
    follow following steps-
    1.TCode-j1if13.-Complete/Reversal/Recredit- Reverse challan.
    All duties will get reversed.
    2.TCode-j1if13.-Complete/Reversal/Recredit- Recredit challan.
    All duties will get recredited.
    3.Create GR for the purchase order and provide the reference of Challan created.
    4.Reconcile and Complete the Challan
    5.Check RG23A part 2 entries for transaction type 57NR and 57RC in table J_1IPart2
    6.Extract RG23A Part 2 register and download the entries in excel through J2I6
    regards

  • Subcontracting challan Reconcilation

    Dear All,
    We have got a PO [subcontracting] of multiple line items . we make 57F4challan and issue the materials thru 541 mvt. we make GR for individual line items.
    when we make the GR for the first line item with reference to challan and reconcile the challan through J1IFQ it orks fine.
    But when we make the GR for the second  line item with reference to the same challan it throws an error message saying that the challan is aldready reconciled and it does not allow me to further refer that challan for GR.
    Plz help.
    Rahul Bhat.

    HI,
    Because when u issue the materials to the subcontractor thro 57F4 u issue them all in a single challan.
    When the GR is done with respect to single item with reference to the same subcontracting challan it considers only 1 item ( as the Gr is done for the same item)
    You cannot give the same reference again for the second item.
    If you do the GR for all the items against the subcontracting challan then it may allow you to reconcile the challan further thus keeping it open till all the items are done.
    PLease check the same.
    Regards,
    Prasanna
    Award if helpful

  • J1IF13 Error in completion of challan

    Hi,
    I have a problem. I have created subcontracting PO with item category 'L'. Material is say R1 & in material data, I have maintained R1 as a subcomponent.
    Now I have done tran posting MB1B 541 wrt PO.
    Challan wrt 541 doc no.J1IF01
    MIGO wrt challan no.
    Reconcilled fully J1IFQ
    Now when I'm trying to complete challan, system is being dumped showing error as
    No excise rate found for material R1
        Message no. 8I005
    Diagnosis
        Either the material's master record does not contain any excise rates at all, or the excise rate is invalid.
    Procedure
        In the Excise Rate Maintenance transaction, select Excise Tax Rate, and maintain the excise rates for the material.
    I hv maintained it in J1ID , but still issue is not ressolved.
    But when I use subcomponent as R2 for Parent matl R1,
    everything is working fine.
    Why so??
    Thanks & Regards,
    Piyush

    Hi Piyush,
    Actually speaking there will never be excise rate for subcontracting.. you normally have service tax and cess service tax on this process. ur excise rate will be 0%
    Check for the service tax and cess on service tax condition records maintained
    Also chech the subcontract check mark in J1iD and please dont mention anything in material type field and try
    Check on excise rate for chapter Id's in J1ID..
    thanks & regards,
    Kiran V
    Edited by: Kiran. V on Apr 22, 2008 1:50 PM
    Edited by: Kiran. V on Apr 22, 2008 1:52 PM

  • Sub-contracting challan reconcilation..?

    hi all
    I have problem in reconcilation of callan,
    While doing reconcilation , its showing error as challan already completed..
    But still the challan is not reconciled, in status its showing completed.
    Thanks
    sap-mm

    hi
    check the status as "Completed" for the Sub-contracting challan.
    also Check in SAP OSS for any notes to be applied

  • 57F4 challan reconcilation

    Hello Friends,
    i am facing the below error while do the reconcilation for the 57F4 challan.
    "Challan not valid, material doc., is valid for another scenario"
    Kindly share your ideas to fix the same.
    regards,
    sathes

    Hi Dear,
    In IMG u have left the Setting.
    Logistic General-->Tax on Goods Mvt->Business Transaction-->
    Subcontracting--->Maintain Mvt Type groups---->
    0001 541
    0002 101
    0002 542
    0002 543 O
    0002 545
    Please don't enter Subcontracting challan manually...select subcontracting challan number by pressing of F4 and Select it and ente rthe  year.....

  • J1IFQ- subcontracitng challan Reconcillation

    HI All
    when i try to reconcile the SC challan system says no document excists. but iam able display the SC challan and it is Status P(Posted)i.e open for reconcillation.
    Processing steps which i performed.
    ME21N Created PO
    ME2O- Strock transfered 541 movent type
    J1IF01- Created SC challan with reference to the material doc(541)
    MIGO - GR 101
    J1IFQ- facing problem that the doc does not exists
    and it is working fine in my development system.
    Please guide me on this.
    Regards
    Srinvas

    Hi
    In  J1IFQ please enter the material document no for the material what you have moved in  541 movement to the vendor
    G.Ganesh Kumar

  • Error While Creating Remittance Challan

    Dear All
    I have made down payment to a Vendor of Rs. 10,000 .TDS @11.33 was deducted on the Down Payment. Then he raised an invoice of Rs. 100,000. Again TDS was deducted on the Rs. 90,000 balance amount.
    Now when I am  Cretaing  Remittance Challan for him I am getting the following error.''
    No unpaid tax lines exist for the given selection criteria.Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
    Thanks and Regards
    Kanwaljit

    The following may be the one of the cause please check all.
    1. Check section code & Bussuniss place at document level in BSEG. if the section code is not updated at document level u can not update the section code and bussiness place for Direct FI invoices from J1INPP as it is meant only for MM invoices. u has to reverse the invoice and repost it. or else develop a BDC/program/query which can update the section code.
    2. Check the repient type at vendor master, and also check wheather the recipent type was changed after posting document it ussullay occurs. the possible solution is again the same reverse the document and repost it.
    Check these two things first and let me know it the problem still persists.
    Thanks & Regards
    Krishna Chaitanya

  • Getting Error while updating   Vendor Challan

    Dear Guru,
                     my client want to use  Extended withholidng Tax . i v configured totaly according to indian TDS configuration. i m getting error while updating the vendor challan.
                 No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
        Business Place and section code updating properly in table.....
    Thanks & Advance
    Laxmi Narayan

    Dear Laxmi Narayan,
    This error would occur, if you miss Business Area/Section Code at the time of Invoice.
    The following thread should answer your query:
    Extended W/H Tax
    Regards,
    Naveen.

  • Error while updating vendor challan   J1INCHLN

    Dear Guru,
    my client want to use Extended withholidng Tax . i v configured totaly according to indian TDS configuration. i m getting error while updating the vendor challan.
    No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
    Business Place and section code updating properly line itme table.....
    Thanks & Advance
    Laxmi Narayan

    Hi,
    Also check the following:
    Sometimes, user will delete the automatic line items generated related to TDS and they will enter manually.  You can find the same as below:
    goto vendor line item in the given document and click on withholding tax icon (near to more data), if u didn't find any thing in this place means, user entered the same mannually, if you found some information in that tax box, then problem not with user.
    If u didn't found any thing in that tax tab, then system won't generate any accounting entry and will issue an error message like what u getting.  In that movement, while updating j1inchln ignore the wrong documents and continue with correct documents.
    You can suggest them, they should reverse the entries which is causing problem, there was no solution from sap side(as this is a mistake from user side)
    Earlier i also faced the same problem, identified users deleted the automatic line items and enter the tds line items mannually
    Hope it can help u to resolve this issue
    all the best
    prasad

  • Error while posting remittance challan

    Hi
    At the time of saving the remittance challan, I am facing the following error.
    "Ex.rate diff.accts are incomplete for account 0000477002 currency INR"
    What is the solution for this??
    Thanks in advance
    Dhanashree

    Hi
    Pls check the exchange rate difference GL assignment and also the tolerance limits set for exchange rates differences. The most probable error is that you have not defined the account for posting the differences,
    Assign points if the same is useful to you
    Regards
    Sanil Bhandari

  • Error While creating Subcontracting challan in J1IF01

    Hi,
    While creating Subcontracting challan in J1IF01Im getting error " Deficit of 3.2000000000000002E+00 in RG23ABED".
    Any suggestion in this regard is very helpful.
    durga
    [email protected]

    Hi,
    You are referring the material challan, which is not posted for Sub-Contracting PO. Pl. check your Material document number. Also pl. check that plant is same in material document & s/c Challan.
    Excise values are not appearing in the S/C Excise Challan, because you are sending the excisable material to your sub-contractor without paying any excise duty. When you reverse & recredit the S/C Challan, it will show the Excise Amounts.
    Regards,
    Prashant Kolhatkar

  • Error in Creating Remittance Challan -TDS

    Hi,
    I have Created PO and Invoice of the same of Rs 52,500/- out which Rs 1,176/- is Withholding Tax (TDS) payable. So when I go to J1INCHLN Tcode to create Remittance Challan fill the relavant details and execute it ask me Choose Selection Creation, those are Document number , Reference, Payment Order. So I select the document number and click ok. After that it shows me error saying, "There are no open Items managed in account 13113940."
    Where as  in  T-Code FAGLL03 its shows me in open Items.
    Can some one guide me why is it so happening. Or is there something missing.
    Also how TDS cretificates is done and TDS payment is done
    Points will be awarded.
    Regards,
    Arvind

    Hi,
    Check you GL account in FS00 > Control Data, whether Open item managed check box is checked.. if not tick it and do the transactions once again.
    After bank challan you have to do challan updation by using T Code J1INBANK.  After that you can run the TDS certificates by using T Code J1INCERT.
    Hope it helps
    Saravanan.A
    Assign Points if it is useful.

  • Subcontract Challan Reconcilation

    Hi all,
    We are using the standard functionality of Subcontracting.Here is the prob. description with e.g.
    As per our challan report(J1IFR) the balance quantity of a material at vendor end is 100Kg.
    But when we run MBLB the quantity is 10kg only.
    Pls let me know how to reconcile the pending challan? As we want to match the stock of MBLB with pending challan quantity.
    The data is huge i.e of two years and for appx. 1500 material.
    Regards
    Purnesh

    Hi,
    Reconcile the material document for the scrap material with the challan. Then try to reconcile the challan.
    Regards,
    Prashant

Maybe you are looking for