Error in LSMW, when creating Routing.

Hi All,
I am facing problem when executing LSMW, I am creating Routing through standard Batch input method, the problem is that on 13th step when system asks for creating batch input session, system by default takes filename.lsmw.conv, 'filename' is basically the name of file being converted internally by the system.
Error that I get is 'No profile with entry tool for task list / / / in session ROUTING_CREA', here ROUTING_CREA is the name of the session. I have given the value of field profile in 5th step when we map the fields and give some constants value for fields when required. I have given a constant value for field profile(BIPKO-PROFIDNETZ) in data maping. Profile basically contains some default values for routing when we create routing we can give the profile and routing will capture some default field values from the profile, under profile there is a check box which is 'entry tool' that must be in active mode if operation level data is required. I have done this setting going into SPRO. Now I do not know Whether the error that I got is due to the profile problem or am I missing something else. Kindly If someone before me has already been through this problem then suggest me how to fix this problem.
Thanks
Mahen

Hi Mahendra,
check the following links:
http://www.sapgenie.com/saptech/lsmw.htm
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
May be u can find some help.
Hope this helps you.
Regards,
Anuradha.B

Similar Messages

Error in LSMW, when creating Routing - QP01

Hi All,
I am facing problem when executing LSMW, I am creating Routing through standard Batch input method, the problem is that on 13th step when system asks for creating batch input session, system by default takes filename.lsmw.conv, 'filename' is basically the name of file being converted internally by the system.
Error that I get is 'No profile with entry tool for task list / / / in session ROUTING_CREA', here ROUTING_CREA is the name of the session. I have given the value of field profile in 5th step when we map the fields and give some constants value for fields when required. I have given a constant value for field profile(BIPKO-PROFIDNETZ) in data maping. Profile basically contains some default values for routing when we create routing we can give the profile and routing will capture some default field values from the profile, under profile there is a check box which is 'entry tool' that must be in active mode if operation level data is required. I have done this setting going into SPRO. Now I do not know Whether the error that I got is due to the profile problem or am I missing something else. Kindly If someone before me has already been through this problem then suggest me how to fix this problem.
Regards,
Ashok

hi,
i think, the error is due to file naming convention in SPECIFY FILE step.
There will be a set of types of files.
1. Presentation server file name.
2. Application server file name.
etc. just double clock on the application server file name & try to change & give some meaningfulname.
try & let us know.
Thanks,
Manjunath MS

An error has occurred when creating this editor

I had created a View in a WDC project which I had also deployed and run successfully in GP several times. Once I closed and opened NetWeaver Developer Studio, and tried to open this View again I get an error saying 'An error has occurred when creating this editor'. Please let me know what could be the reason.
Anil

I also faced with this problem several times but without fatal consequences. To be sure you can check the log in your workspace and paste it to the thread.
Also, try to close all the views and reopen the studio, usually it solves the problem.
Aliaksei

If the LDAP "icsCalendar" value contains a space, an error will occur when creating events or tasks

If a user's LDAP
"icsCalendar" value
contains a whitespace, the user will still be able to log in to the iPlanet
Calendar Server(iCS). However, the user will receive a bad request
error when creating events or tasks. The event or task is created,
but the error will occur every time the user tries to save one.
The "icsCalendar"
preference cannot have a space in it. To avoid the above problem,
the administrator must fix this value in LDAP.

Hi Mahendra,
check the following links:
http://www.sapgenie.com/saptech/lsmw.htm
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
May be u can find some help.
Hope this helps you.
Regards,
Anuradha.B

Error in GTS when creating a sales order

Hello All:
Let me first say that I have researched the forums and web for my answer to no avail...there is not a lot of information out there for GTS issues.
When creating a sales order in ECC 600; I am receiving errors...I have looked at SLG1 in order to get more information on these errors. I have validated my config in GQ0 and it appears to be correct. Here is my errors I am receiving:
Legal Control: Item Type Mapping not Maintained
Item Category: ZTAE
Item Category: ZTAQ
Legal Control: Partn. Function Mapping not Maintained
Partner Function: AG
Partner Function: AP
Partner Function: CI
Partner Function: EN
Partner Function: RE
Partner Function: RG
Partner Function: SP
Partner Function: WE
Legal Control: Mapping of Org. Units not Maintained For Fore
Company Code: 1000
Legal Control: Mapping of Org. Units not Maintained For Lega
Plant: 1000
I have looked under the Org Structure for these errors and think my configuration is correct. I have checked under the following:
In SPRO I have done the following Config under Org Structure:
Define Foreign Trade Organizations
Assign Company Code At Feeder System
Define Legal Units
Assign Legal Unit to Foreigne Trade
Assigned Plant at Feeder System
In Spro I have done the following Config under Partner Structure:
Define Partner Functions
Define Groups of Partner Functions
Assign Partner Functions at Feeder system
In SpRO under Compliance Management I have done the following Config under document structure:
Define Doc Types
Assign Doc types at feeder system
Define item categories
Assign item categories at feeder system
It is obvious I am missing something....Please help...it would be greatly appreciated....

Hi Dave
Thanks for replying.
For Business Partners the error I am getting in SLG1 is the follwoing:
Sub Object text
Mapping of API to Customs Shipment - Arrival
Program
/SAPSLL/SAPLCORE_APPLOG_SERV
@5C\QError@
The system was unable to determine an FT organiz. for company code 1000
The system was unable to determine a legal unit for plant 1000
No mapping information exists for partner function AG
Another error for Business Partner:
sub object text
Business Partner Distribution
Program
/SAPSLL/SAPLCORE_APPLOG_SERV
@5C\QError@
Please use another function to maintain the SPACE version of the address
For Item Categories
SubObect TextMapping of API to Customs Shipment - Arrival
Program
/SAPSLL/SAPLCORE_APPLOG_SERV
@5C\QError@
No mapping information exists for item type ZTAQ
The system was unable to determine a legal unit for plant 1000
No mapping information exists for partner function AG
Also we are using GTS 7.2 but upgrading to GTS 10 and I am trying to create our testing client for a to test after upgrade
Edited by: Kim Blair on Sep 9, 2011 4:57 PM
Edited by: Kim Blair on Sep 9, 2011 4:58 PM

Error IW121 issued when create a maitenance order in IW31

Dear expert,
Error IW121 occured when I created a mainetance order in IW31.
IW121;Activity type XXX is not set up for cost center XXX in the year
02.07.2010.
Does anyone know how to deal with it?
Best regards

Do Consult your FICO Consultant, the link between cost Center and activity type has not been established. In Transaction KP26 you could establish the link as already stated above. Apart from this, If you do not want to create the link and still want to move forward with the Order, What you could do is :
Go To SPRO> Plant Maintenance and Customer Service> maintenance and Service Processing--> Message Control
Click on New Entries Button, Include the Message Application Area: IW Msg: 121 Enter the category as Warning or leave it blank so that the message does not bother you any more...
Regards...

Error 10 occurred When createing an executable with application Builder?

Problem: I am using the LabVIEW Application Builder to create an executable from my VI. When I run the Application Builder, I receive the following error:
Error 10 occurred at Copy in Win Install Copy Redistribution Files.vi->Win Install Create.vi->Dist Call Create Installer.vi->Builder Application.vi
Possible Reason(s)
Labview : Duplicate Path
or
NI-488 : New I/O attempted with old I/O in progress
Why do i receive this error and how can i resolv this issue?

Jiang,
It sounds like this could be an overwrite issue. From the file path you specified, I can tell you that the error is occurring in creating the installer for your executable. Are you specifying an installer directory where you have already created an installer of the same name? If so, is that directory read only? Make sure that write privileges are enabled for you installer directory, and if that doesn't fix anything, try specifying a different installer directory.
If none of these suggestions take care of the problem, please post a simple example that illustrates the problem (i.e. a simple VI and a copy of the build file). We can then try to replicate the problem and troubleshoot it. What version of LabVIEW are you using?
Regards,
E. Sulzer
Applications Engineer
National Instruments

Fail when creating routing through bapi.

what are the mandatrory steps to create routing using bapi fm ( bapi_routing_create )?
when i create routing using bapi it is showing the routing is created succesfull but it is not updating in the standard table plko .

after bapi use commit
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.

Encounter error message 61062 when create PR via ME51

Dear Consultant,
I encountered error message 61062 - "dd.01.2011 date comes after end of valid factory calendar. (Pls correct)" when create PR via transaction ME51. Although I have changed the Delivery date to "31.12.2010", system still issue error message. FYI, material that I used to create PR has planned delivery time = 185 days (pre-configured by our purchaser via Purchasing info.record) which is equivalent to dd.01.2011. Our factory calendar is configured valid up to Year 2010 and the new year (2011) will only be configured at end of December.
If using transaction ME51N to create PR for the mentioned material above (with delivery date entered as 31.12.2010), there is no error message being issued by the system. May I know is there any solution to transaction ME51?
Pls advise asap.
Thanks & regards,
LOI

>
LOI wrote:
> May I know if there Is any effect for other modules like PP/PM on changing plant calender to 2011?
yes, a positive effect, you will not receive error messages because of missing calender anymore.
I have my calendars maintained until 2015
ME51N only takes an info record into account when you do source determination, without source determination, the planned delivery time from material master is taken.

Error message appear when creating new bookmarks

When creating new bookmarks a pop-up window appear with the following info:
unload: [Exception..."Component retyrned failure code:0x80004005 (NS_ERROR_FAILURE) [nsIObserverService.removeObserver]" nsresult:"0x80004005 (NS_ERROR_FAILURE)" location: "JS frame:: chrome://trustchecker/content/trustchecker.js:: anonymous:: line 955" data:no]
The bookmark is saved at the bottom of the list but it is not possible to select folder to store bookmark. How do I fix this problem?

I believe Trust Checker is part of Zone Alarm, to test this try disabling the Zone Alarm add-ons in Firefox to see if you can then create new bookmarks.
To disable extensions:
Click the Tools menu and then select Add-ons . The Add-ons window appears.
# In the Add-ons window, click the Extensions panel. The list of installed extensions appears.
# Click the name of an extension in the list to select it.
# Click Disable to disable the selected extension.
# Click Restart Firefox .
If it does turn out to be the Zone Alarm extension causing the problem, check for any updates to Zone Alarm, if none you could report the issue to them.

Runtime error in LSMW to create Material Master

Hi all,
I am trying to create Material No. using direct input method in lsmw. The program name is RMDATIND. But while executing the last step i.e Start Direct input program I am getting a runtime error
"A RAISE statement in the program "SAPLMG25" raised the exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated."
I have checked all the steps of lsmw. Any idea why this specific error is coming?

Are you able to create the material manually with the data. If you have checked the basic data view then i would check to see if base unit of measure is mandatory and if its being passed/mapped properly for the material you are creating.

TNS Protocol error in 11g when creating a new database

Hi,
I have installed 11g R2 64 Bit on Solaris 10 64 Bit. The installation happened successfully. Now when I use DBCA to create a new database it says ORA-12560 TNS:Protocol Adapter Error. I am accessing the server console and performing all operations there itself, I can't understand this issue.
I have also created a listener.ora and tnsnames.ora and its running successfully (but don't really know if it is needed since I have not even created the database). The sqlnet.log shows following
=====================================================
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/export/home/oracle/product/11.1.0/db_1/bin/oracle)(ARGV0=oracleTSG11G)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=sol11oracle-vm)(USER=oracle))))
VERSION INFORMATION:
TNS for Solaris: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Solaris: Version 11.2.0.1.0 - Production
Time: 17-DEC-2009 10:30:52
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS:protocol adapter error
ns secondary err code: 0
nt main err code: 530
TNS-00530: Protocol adapter error
=====================================================
Some excerpts from the trace is:
=====================================================
2009-12-17 11:14:38.776040 : nsopen:opening transport...
2009-12-17 11:14:38.776097 : ntpcon:entry
2009-12-17 11:14:38.776140 : ntpcon:toc = 1
2009-12-17 11:14:38.776196 : sntpcall:entry
2009-12-17 11:14:38.776221 : sntpcall:not detaching from parent with additional fork
2009-12-17 11:14:38.796184 : sntpcall:hdl[IR]=13, hdl[IW]=12
2009-12-17 11:14:38.796429 : sntpcall:result string is NTP8 0
2009-12-17 11:14:38.796527 : sntpcall:Can't read from pipe; err[1] = 8
2009-12-17 11:14:38.796571 : sntpcall:exit
2009-12-17 11:14:38.796674 : ntpcon:exit
2009-12-17 11:14:38.796755 : nserror:entry
2009-12-17 11:14:38.796776 : nserror:nsres: id=0, op=65, ns=12560, ns2=0; nt[0]=530, nt[1]=8, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
2009-12-17 11:14:38.796861 : nsopen:unable to open transport
2009-12-17 11:14:38.796884 : nstoClearTimeout:entry
=====================================================
In /etc/host i have added server ip with host name.
$ more /etc/host
172.26.171.57 sol11oracle-vm
The .profile of oracle user
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_BASE=/export/home/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.1.0/db_1
export ORACLE_SID=TSG11G
export PATH=$PATH:/usr/local/bin:/usr/ccs/bin:/usr/sfw/bin:$ORACLE_HOME/bin
Please suggest.

$ more tnsnames.ora
# tnsnames.ora Network Configuration File: /export/home/oracle/product/11.1.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
TSG11G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.26.171.57)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TSG11G)
$ tnsping tsg11g
TNS Ping Utility for Solaris: Version 11.2.0.1.0 - Production on 17-DEC-2009 11:37:10
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/export/home/oracle/product/11.1.0/db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.26.171.57)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = TSG11G)))
OK (50 msec)

Error with JNDI when creating new data source

Hi :
This weekend, while adding new applications to the production environment we ran into a problem where the JNDI tree of the new managed servers was unreachable.
The error message we saw was:
<1364066840022> <BEA-149231> <Unable to set the activation state to true for the application 'EOI'.
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:349)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
weblogic.common.ResourceException: is already bound
at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:387)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:346)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
We traced the issue to a new data source that was added were we found that along with the the expected jndi name entry in the jdbc xml file, there were two blank entries:
<jndi-name>weblogic.jdbc.DataSource.EOI</jndi-name>
<jndi-name></jndi-name>
<jndi-name></jndi-name>
The data source was deleted, consoles restarted, the data source recreated and the issue occured again. To get by the issue we had to manually remove the blank tags from the xml file.
We created 2 new data sources, and it only happened on the one. The same data source each time. Additionally, this issue did not occur when these changes were made in our lower (development, qa) regions.
The version is the same in all three regions.
WebLogic Version:
WebLogic Server Temporary Patch for 9324911 Wed Feb 03 22:38:01 PST 2010
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967
Is this a known issue? And if so, is there a way to avoid it, other than to start constantly checking the newly created XML files?
Thank you
ted

Yes, this is a common issue and documented in Oracle Docs:
WebLogic Server: Getting "weblogic.common.ResourceException: is already bound" exception with JDBC JNDI name (Doc ID 1154250.1)
The only fix is that you need to remove the empty value entries.
Cheers!!
AJ

Error in Forms when creating simple form in c sharp

Hi
I've created a very simple Csharp form with two textboxes and one press button. It is linked to a fortran DLL (Salford Compiler)
When I compile and run the program the first time it all works well. But when I save the file and quit VS 2013
and then restart and reload the program I get this funny error when I try to view the form again.
Warning 1 The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG)) 0 0
I've tried deleting the Temporary asp.net files as suggested in one forum but to no avail. Any help much appreciated
Terry

Hi ProfTC,
By researching, I found this thread in StackOverFlow, which has solved this problem.
http://stackoverflow.com/questions/8269386/could-not-load-file-or-assembly-the-parameter-is-incorrect
The answer is below:
Depending on if your are running X64 you might need to clean up a couple more spots. Just cleaning up my user directory was not enough.
%TEMP%\Temporary ASP.NET Files
C:\Windows\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files
C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Temporary ASP.NET Files
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Temporary ASP.NET Files
This list will grow as if you have other versions of the framework installed.
So , you could clear these ASP.NET files in more spots.
If you still have problems, you could feel free to let me know,
Or if your project is related to ASP.Net, you could post your issue to the ASP.Net forum for better supports.
http://forums.asp.net
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error in process when creating Purchase Order against WBS

Hi!
We are creating a purchase order (BBP_POC) against a WBS. But when trying to purchase for more than what the project budget is set to the purchase order gets the status "Error in process". We do not want the purchase order to be replicated to ECC but dont want it to be created in SRM as well. Is there a way to get an error message when trying to create the Purchase order? We do not want to end up with alot of purchase orders with "errror in process".
When doing the exact same thins in sourcing cockpit it is not possible to create the purchase order. Then we receive the error message (or warning) stopping us from creating a PO in SRM.
How to get the error and warning in BBP_POC?
Sincerely
Anders Öhrling

The budget check should work in the following cases
    1. When you create and change a shopping cart (e.g. after it has been held)
    2. When you create and change a purchase order (purchasing cockpit)
    3. When you create a purchase order from within the sourcing cockpit (as of SRM 2.0)
    4. With the approval of shopping carts and purchase orders
Unfortunately nr 2 is not working.
BBP_BUDGET_CHECK is not implemented.
Sincerely
Anders Öhrling

Error in LSMW, when creating Routing.

Similar Messages

Maybe you are looking for