Error in planning sequence- 'Cannot generate combinations of multiprovider'
Hi Gurus,
I am facing a problem while executing my planning sequence in modeller. Aggregation level contains all characteristics in multiprovider. Multiprovider contains actual and planned cubes. Filter is based on product name in modeller. Planning function is copy. Characteristics to be changed in calyear. But the error generated while executing planning sequence is
'To value - 1 for subprocess 1 produces following errors.
'Cannot generate combinations for multiprovider'
'Cannot generate combinations in step 00'.
I would really appreciate the time and effort which will be taken by gurus.
Thanks in advance.
Jerry.
Hi,
1 Before Unchanged 2007 300,00 2,000 600,00 IC_MODEL
1 After Unchanged 2007 300,00 2,000 600,00 IC_MODEL
2 Reference Data 2007 300,00 2,000 600,00 IC_MODEL
2007 is the calyear in the actual cube ic_model.
in copy function i have specified that 2007 should be changed to 2011 and ic_model(actual cube) to planned cube.
Similar Messages
-
RFC_ERROR_SYSTEM_FAILURE error in Planning Sequence in RSPLAN
Hi everyone,
Whenever we run the Planning Modeler in RSPLAN and choose any Planning Sequence either for changing or executing, or just selecting it the system throws the following error:
"An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE", and retrieve a short dump.
This only occurs in all the planning sequences, which were working before without any issues, and this is only happening in BW development not in production.
The short dump goes like this:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE
Active Calls/Events
No. Ty. Program Include Line
Name
23 FUNCTION SAPLRRMS LRRMSU13 73
RRMS_X_MESSAGE
22 METHOD CL_RS_BASE====================CP CL_RS_BASE====================CM004 7
CL_RS_BASE=>X_MESSAGE_S
21 METHOD CL_RSDRC_PROVRQ_SRVS==========CP CL_RSDRC_PROVRQ_SRVS==========CM004 122
CL_RSDRC_PROVRQ_SRVS=>GET_RQTS_BASIC
20 METHOD CL_RSD_DC_SUPPORT_INFOCUBE====CP CL_RSD_DC_SUPPORT_INFOCUBE====CM006 6
CL_RSD_DC_SUPPORT_INFOCUBE=>IF_RSD_DELTACACHE_SUPPORT~GET_RQTS
19 METHOD CL_RSD_CUBE===================CP CL_RSD_CUBE===================CM02R 26
CL_RSD_CUBE=>IF_RSD_DTA~GET_DATA_TIMESTMP
18 METHOD CL_RSD_DTA====================CP CL_RSD_DTA====================CM01K 3
CL_RSD_DTA=>IF_RSD_DTA~GET_DATA_TIMESTMP
17 METHOD CL_RSPLS_PLAN_BUFFER==========CP CL_RSPLS_PLAN_BUFFER==========CM00H 35
CL_RSPLS_PLAN_BUFFER=>IF_RSD_DELTACACHE_SUPPORT~GET_RQTS
16 METHOD CL_RSR_RRK0_RQTS==============CP CL_RSR_RRK0_RQTS==============CM003 118
CL_RSR_RRK0_RQTS=>APPEND_BUFFER
15 FUNCTION SAPLRRK0 LRRK0U23 33
RRK_BUFFER_NOTIFY
14 METHOD CL_RSR_OLAP===================CP CL_RSR_OLAP===================CM00X 44
CL_RSR_OLAP=>CREATE_BUFFER
13 METHOD CL_RSR_OLAP===================CP CL_RSR_OLAP===================CM002 65
CL_RSR_OLAP=>OPEN_KHANDLE
12 METHOD CL_RSR_OLAP===================CP CL_RSR_OLAP===================CM00M 15
CL_RSR_OLAP=>IF_RSR_OLAP~GET_SELDR
11 METHOD CL_RSBOLAP_SELECTION_OBJECT===CP CL_RSBOLAP_SELECTION_OBJECT===CM007 42
CL_RSBOLAP_SELECTION_OBJECT=>LOAD_DEFINITION
10 METHOD CL_RSBOLAP_SELECTION_OBJECT===CP CL_RSBOLAP_SELECTION_OBJECT===CM009 20
CL_RSBOLAP_SELECTION_OBJECT=>SUBMITTED
CL_RSBOLAP_SELECTION_OBJECT=>SUBMITTED
9 METHOD CL_RSR_OLAP_VAR===============CP CL_RSR_OLAP_VAR===============CM003 283
CL_RSR_OLAP_VAR=>IF_RSR_VAR_RUNTIME~SUBMIT
8 METHOD CL_RSR_VAR_RUNTIME============CP CL_RSR_VAR_RUNTIME============CM00Q 11
CL_RSR_VAR_RUNTIME=>IF_RSR_VAR_RUNTIME~SUBMIT
7 METHOD CL_RSPLFR_VAR_CONT============CP CL_RSPLFR_VAR_CONT============CM003 24
CL_RSPLFR_VAR_CONT=>SUBMIT_OLAP_VAR_CONT
6 METHOD CL_RSPLFR_VAR_CONT============CP CL_RSPLFR_VAR_CONT============CM007 175
CL_RSPLFR_VAR_CONT=>SCREEN_NECESSARY
5 METHOD CL_RSPLFR_CONTROLLER==========CP CL_RSPLFR_CONTROLLER==========CM00T 158
CL_RSPLFR_CONTROLLER=>CHECK_PLSEQ_SCREEN_NECESSARY
4 FUNCTION SAPLRSPLSSE LRSPLSSEU02 46
RSPLSSE_PLSEQ_EXECUTE
3 FORM SAPLRSPLSSE LRSPLSSEU02 1
RSPLSSE_PLSEQ_EXECUTE
2 FORM SAPMSSY1 SAPMSSY1 85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Does anyone have any idea what could be the issue here?
Thanks,
Diogo.Hi,
Thanks for the response.
I've already searched for that not but haven't installed it yet. I'm gonna try it to see if it solves it, but the weird thing is that in production the issue doesn't occur, only in development.
Diogo. -
HELP: Error at planning sequence
I created a planning sequence that spreads yearly values to 12 months with standard method.
But when i run it i receive a dump with the message "ABEND: Systemfehler in Programm SAPLRRS2 und Form MULTI_ASSIGN-01-"
I found out that the codings stops at the last line of this form:
FORM MULTIPLE_ASSIGN USING I_VRNID TYPE RRvrnid
i_t_range type rsdd_t_range
I_PRAEFIX2 TYPE RS_CHAR1
CHANGING C_SX_GVAR TYPE ANY.
FIELD-SYMBOLS: <L_GVAR_TABLE> type hashed table,
<L_key> type any.
DATA: BEGIN OF l_S_fieldname,
PRAEFIX1 TYPE RRPRAEFIX,
PRAEFIX2 TYPE RS_CHAR1,
VRNID TYPE RRvrnid,
END OF l_S_fieldname,
l_s_range TYPE rrrangesid.
l_s_fieldname-praefix1 = rrk_c_praefix1-multiple.
l_s_fieldname-praefix2 = i_praefix2.
l_s_fieldname-vrnid = i_vrnid.
ASSIGN COMPONENT l_s_fieldname OF STRUCTURE c_sx_gvar TO <l_gvar_table>.
IF sy-subrc NE 0. PERFORM x_message USING rs_c_true 'MULTI_ASSIGN-01-'. ENDIF.
But why this component cannot get assigned?
Thanks for your help
HerfriedHi Herfried,
if you execute the planning sequence from a web template or workbook regenerate all involved queries.
Filter use technical queries with name <ALVL>/!A<ALVL> with <ALVL> the technical name of the aggregation level used for the filter. Regenerate this query as well (e.g. in RSRT).
Regards,
Gregor -
Oracle Primary key error on a sequence number generator
I have a table called table 1 and I am trying to insert a few values in this table and i am constantly getting bogged down by a primary key error. Strange thing is this primary key called "ID" on the table is a sytem generated sequence value number. The error is
"ORA-00001: unique constraint (Schema1.LICN_PK) violated"
Any idea?
I will post the structure of the table below and my SQL statement as well.
Table structure:
CREATE TABLE schema1.table1
ID NUMBER(12),
LITM_ID NUMBER(12),
PROG_PROGRAM_CD VARCHAR2(2 BYTE),
SCHED_NBR VARCHAR2(3 BYTE),
SCHD_VERSION_YR NUMBER(4),
SCHD_VERSION_NBR NUMBER(3),
LITM_LINE_ITEM_NBR VARCHAR2(3 BYTE),
SLIN_LINE_ITEM_ID NUMBER(12),
COND_CD VARCHAR2(15 BYTE),
COND_TYPE VARCHAR2(1 BYTE) DEFAULT 'O',
COND_TEXT VARCHAR2(240 BYTE),
DERIVE_COMPRSN_IND VARCHAR2(1 BYTE),
DISPLAY_SEQ_NBR NUMBER(5),
SEVRTY_CD VARCHAR2(1 BYTE),
OVRRDBL_IND VARCHAR2(1 BYTE),
NEVER_OVRRDBL_IND VARCHAR2(1 BYTE),
CREATED_BY VARCHAR2(8 BYTE),
CREATED_TMST DATE,
MODIFIED_BY VARCHAR2(8 BYTE),
MODIFIED_TMST DATE
CREATE UNIQUE INDEX schema1.LICN_PK ON schema1.table1
(ID)
NOLOGGING
TABLESPACE INDEX_STAT1
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 128K
NEXT 128K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
CREATE UNIQUE INDEX schema1.LICN_UK ON schema1.table1
(LITM_ID, COND_CD)
NOLOGGING
TABLESPACE INDEX_STAT1
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 128K
NEXT 128K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
Table structure ends
****************Insert statement*************
insert into table1
(id,
litm_id,
prog_program_cd,
sched_nbr,
schd_version_yr,
schd_version_nbr,
litm_line_item_nbr,
slin_line_item_id,
cond_cd,
cond_type,
cond_text,
derive_comprsn_ind,
display_seq_nbr,
sevrty_cd,
ovrrdbl_ind,
never_ovrrdbl_ind,
created_by,
created_tmst,
modified_by,
modified_tmst)
values
(LITM_ID_SQ.nextval,
5678,
'28',
000,
2005,
1,
'007',
28,
'0008',
'E',
'No advance',
'N',
80,
'M',
'N',
'Y',
USER,
SYSDATE,
USER,
SYSDATE);
*************End***********************
Any idea why the error is coming up and any way to resolve it. I checked the max sequence number value and kept running it for a while and then tried to run my insert statement but no luck yet.
Please help!!!Hi,
Are you tring to do the same insert more than once?
The sequence for ID will be generated and there will be no problem with that.
But what about UNIQUE INDEX schema1.LICN_UK ON schema1.table1(LITM_ID, COND_CD)?
you are trying to insert the same values again into those columns... and there is a unique index.
Test your insert by dropping the unique index LICN_UK
DROP INDEX schema1.LICN_UK;Now it will work. But if you need the uniqueness, you need to insert different values for those columns each time you insert.
G. -
Error GR410: characteristic cannot be combined with key figures
Hi,
My problem is in Report Painter.
I need to add selection by trading partner (or by vendor) in report 6OBU-001. For this Iu2018ve modified reporting table RWCOOM, in order to make available characteristic RASSC in the library 6O2.
Iu2019ve added Trading partner in General selection of my own report (copy of 6OBU-001), but RP gives an error message: u201CCharacteristic RASSC cannot be combined with key figures. Check the report definition: the key figures used must be compatible with characteristic RASSC. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.u201D
Any opinions are truly appreciated.
AntonI read this note before, but I still don't know how to write a ABAP code.
I need information from table COEP like sum of qunatity or costs. I have this information for Cost Elements and Orders in CCSS but I don't have for Materials. -
Some chart types cannot be combined with other chart types
Good morning,
I am working on a MacBook Air (purchased Oct 2009) running Lion. While working in Excel 2011, I encounter the error "Some chart types cannot be combined with other chart types. Please select a different chart type." I am highlighting 46 cells to create a marked line graph. There are no other charts in the file. I called Microsoft support who told me they had not heard of this problem in Excel (only in PowerPoint). I also took it to an Apple Store Genius, who was unable to solve the problem, which is understandable, given that he does not work for Microsoft.
To try to resolve this issue, I have recopied the data to a new spreadsheet, re-typed all the data to a new spreadsheet, and deleted plist files. When I sent it to a different computer (which was running Excel 2011 and Snow Leopard), I could make the figure but I cannot edit the figure or add data on my laptop.
Any suggestions that you have would be much appreciated,
Signed,
One stressed out PhD student who desperately needs Excel to workHi, folks.
Apparently, when using Excel 2011 and running Lion, if the tab names in excel contain a period (.), this error occurs. I removed the periods and now I can graph again. I hope this helps anyone else who may experience this problem. -
APP-FND-00756: Cannot find combination CCID=303998 CODE=MSTK SET=1079
In Purchasing, when I inquiry Autocreate form, it appears this error APP-FND-00756: Cannot find combination CCID=303998 CODE=MSTK SET=1079.
Does anyone have any ideas what cause this?
Thank you.Sandeep,
Your answer is correct, One PO in my company had the same issue. I checked that the item with the inventory item id "XX" (from "CCID=XX") was not assigned to the warehouse under which the PO was placed.
Thanks -
IP: Error in packaged planning sequence in process chain
Hi all,
We run a planning sequence from within a process chain. As the data transferred are quite a lot, we have packaged with setting "automatically" and with 30 packages to be built. Now the function returned (it ran already successfully before!) an error message stating:
Master cannot read return value from subprocess 2
and another error:
An error occurred with the maintenance of the query directory.
Do you have any idea what this could be?
Many thanks in advance,
AndreasHi Rakesh,
It's a BASIS problem. After transport during process chain activation, the background user tries to logon with the password and if it fails the chain will not be activated. The contents will be transported though. You can manually activate the chain. You can request the Basis guys to fix this.
- Ram -
No Authorization error in executing a planning sequence
Hi,
We are using BI 7.0 Integrated Planning.
We have implemented Mark Bernaud's file upload solution. We have used a planning sequence that uploads the file and stores it in a cube. Using it, we are able to upload files without any problem when executing with a SAP User Id which has all the authorizations (the user id has SAP_ALL specified in its list of profiles). Now, we have a requirement where we need to execute the file upload using a user id which has limited authorizations. When we are trying to execute the file upload with the userid that has limited authorizations, we are getting the following authorization error.
'You are not authorized to execute sequence PL_SEQ_FL_UPLOAD'
where PL_SEQ_FL_UPLOAD is the name of planning sequence we are using. We have also included the authorization variable in the filters being used as suggested in one of the blogs but this didn't help.
Could anyone please let us know the authorization objects to be added to the user id to enable access to this file upload.
Many Thanks,
Narendra.Thank you very much Diogo,
The objects you suggested were already there. We have successfully traced the error by switching on the trace using ST01. We found the reason for the error to be that display authorization is not provided for S_RS_PLSQ whereas execute authorization is already present for that.
Once again thanks Diogo.
Many Thanks,
Narendra -
Error in execute planning sequence variant in process chain
Hi ,
While creating an Execute planning sequence variant in process chain in Quality system , i am getting an error" variable variant not selected ' though i created a variable variant and selected it in execute planning seq variant.
Transporting it from development system didnt work therefore i am trying to create it directly in Quality .
Any idea what could be the issue.Hi,
Variable variant can be saved for planning sequence in modeler and then cab be used in process chains.
In process chain you can choose "Execute planning sequence"( separate process type) and add planning sequence with variant.
[http://help.sap.com/saphelp_nw2004s/helpdata/en/43/1d000c41130bd5e10000000a422035/frameset.htm]
Thanks
Pratyush -
Planning Sequence error - You do not have sufficient authorization
Hello Experts,
I am encountering the following error during execution of my planning sequence:
You do not have sufficient authorization
Message no. EYE007
Diagnosis
You do not have sufficient authorization for the requested data records.
Procedure
Either select other data or get the required authorizations from your administrator.
Can anyone please suggest me what could be the possible cause of this error and how can I overcome it?
Thanks in advance,
Nitish.
Edited by: Nitu_0105 on Jan 12, 2012 11:54 AMCheck the planning level on which planning sequence is based for values restriction.Looks like values for which it is been restricted you are not authorized or Roles assigned to you are not restricted with values in planning level.
Also check if level is been restricted with any variable on which authorization is been restricted.Some are user specific example specific business area are assigned to only some users ...so you need to add your user ID to those variable. -
CHAR RELATIONSHIP error in SEM BPS planning sequence
Hi,
I'm executing a planning sequence with 2 planning functions.
1st being "Exit funciton" & 2nd being "Repost funciton".
I've a "characteristic relationship of type attribute" defined at the planning area level.
Am getting CHAR RELATIONSHIP check error when am executing this sequence.
EXIT function gives blank values for a characteristic that is used in "characteristic relationship".
But, REPOST function adjusts this blank characteristic value to actual value which will be correct when "CHARACTERISTIC RELATIONSHIP" is checked.
When I execute sequence, EXIT function gets executed & CHAR RELATIONSHIP errors are being displayed before "REPOST" function is being executed.
Is there any other approach to deal this scenario? like checking CHAR RELATIONSHIP after REPOST funciton execution?
I can execute REPOST funciton from "EXIT FUNCTION" using API_SEMBPS_FUNCTION_EXECUTE, but this doesn't suit my needs.
Please note that I've a need to use 2nd planning function rather deriving characteristic relationship from the EXIT function.
Appreciate any ideas/thoughts.Hari,
each function must produce results that adhere to the rules specified as characteristic relationships. BPS will always execute the char.relationships after the exit function. You might be able to avoid this by adjusting the characteristics in your planning level.
Calling another function (like REPOST) from within an exit is not possible since BPS needs to finish processing the exit first, before it can run the repost.
Regards
Marc
SAP NetWeaver RIG -
Business Rule Sequence Error in Planning
Hello Everyone,
I have a Planning application where users can run a sequence of rules by going to Tools > Business Rules and selecting the sequence. The sequence has about 8 rules in it. The sequence errors after the 7th rule (a currency conversion/calculation which takes upwards of 12 minutes). The logs do not say anything about an error, however, it does say that the active user was cleared on the database. (The BR log says that the rule never finished but the Essbase log says that it finished. The following rule in the sequence never starts.
Note: The business rule sequence completes without errors when the sequence is started from Essbase Administration Services.
Is there some type of timeout/setting update I should look at or any suggestions on where to look within the business rule?
Thank you,
MarkHi,
Have a read of the following :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch02s07s04.html
It explains how to set the threshold before business rules are run in the background to get around timeouts.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error message "one or more sequences cannot be opened"
Premiere won't open a saved file - error message "one or more sequences cannot be opened" - no options given.
This has happened several times, after Premiere crashes. Has anyone had this same problem, or know what to do about it?FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
-
Planning Sequence: Error when runnning in a Process Chain
When trying to run a planning sequence in a process chain (with the correct variable input variant) I receive the following error message:
Inconsistent input parameter (parameter: <unknown>, value <unknown>
When running this planning sequence in the modeler, it runs without errors.
Any help greatly appreciated.
Many thanks,
MattHi,
Can you pls explain your requirement..
1)Are you trying to trigger this proces chain in the background?
2)Does the planning sequence which you are trying to execute in the process chain contains a planning function that is expecting some variables to be passed by the user?
Rgds
Shyam
Maybe you are looking for
-
Dear all, I need to connect from the flex 3.0 to ejb 3.0 what to write the build.xml for creating the ear file. Thanks & Regards, Mala.
-
I absolutely LOVE the iPad and Pages. When transferring Word documents to the iPad / Pages there are some frustrating incompatibilities that I hope will be corrected soon. 1) Unrecognized TimesNewRoman font is replaced with TimesNewRomanXXXX (with a
-
How to link to a page inside a PDF file?
PDF users, I can link to a PDF file from a web page, for example, with the <a href> tag. Is there a way to link to somewhere inside the PDF file, for example to a page number or a heading title? Yours, Michael F ========
-
Can anyone tell me if Celtic MN is an available font in Version 7?
-
Hi all, My requirement is .......in me21 and me22 end users are entering line items in dis order like 1,20,25,14 . I have to modify it to 10,20,30 for existing line items for me22 i have to restrict with erro message.my exit is exit_sapmm06e_012. Ple