ERROR in PROCEDURE PL/SQL: ORA-00947: not enough values
Hi all i am creating a Procedure in which i am getting very strange ERROR
h4. i am using Oralce 11g, SQL Developer 3
my scenario is :
CREATE SEQUENCE tt_TMPMEASURESOURCE_ID
START WITH 1
INCREMENT BY 1;
CREATE TABLE tt_TMPMEASURESOURCE
ID NUMBER(10,0) ,
OBJNAME VARCHAR2(200) ,
PRSP NUMBER(10,0) ,
SOURCEID NUMBER(10,0) ,
SOURCENAME VARCHAR2(100) ,
FIX NUMBER(3,0) ,
MNAME VARCHAR2(1000) ,
MDESC VARCHAR2(1000)
CREATE OR REPLACE TRIGGER tt_TMPMEASURESOURCE_ID_TRG
BEFORE INSERT
ON tt_TMPMEASURESOURCE
FOR EACH ROW
BEGIN
SELECT tt_TMPMEASURESOURCE_ID.NEXTVAL INTO :NEW.ID
FROM DUAL;
END;
INSERT INTO TT_TMPMEASURESOURCE
*(OBJNAME,PRSP,SOURCEID,SOURCENAME,FIX,MNAME,MDESC)*
values ('rajnish',43,54,'anish',4,'apple','kumar');
output :
+1 row inserted+
h4. select * from TT_TMPMEASURESOURCE;
h3. 1 rajnish 43 54 anish 4 apple kumar
creating and compiling Procedure
create or replace procedure tem_test
as
begin
INSERT INTO tt_TmpMeasureSource
*(OBJNAME,PRSP,SOURCEID,SOURCENAME,FIX,MNAME,MDESC)*
VALUES ( v_ObjName, v_PrespectiveID, v_SourceID, v_SourceName, v_FIX, v_MName, v_MDesc );
when compiling
Error(63,16): PL/SQL: SQL Statement ignored
Error(63,28): PL/SQL: ORA-00947: not enough values
i am do not understand that when Trigger A trigger is allready there for 1st column
then why its giving me this error?
please help me out
thanks
i got my solutions
creating and compiling Procedure
create or replace procedure tem_test
as
begin
INSERT INTO tt_TmpMeasureSource
*(OBJNAME,PRSP,SOURCEID,SOURCENAME,FIX,MNAME,MDESC)*
VALUES ( v_ObjName, v_PrespectiveID, v_SourceID, v_SourceName, v_FIX, v_MName, v_MDesc );
it was a typography mistake
this line was missing in Original procedure
*(OBJNAME,PRSP,SOURCEID,SOURCENAME,FIX,MNAME,MDESC)*thanks
Similar Messages
-
Hi,
I have a package body as given below
CREATE OR REPLACE PACKAGE BODY DF AS
FUNCTION T24_GetCOPYBatchKeyAndDate(RECKEY VARCHAR2)
RETURN RTNVAL
IS
RTNVAL1 RTNVAL;
DELPOS INTEGER;
LISTSTRING VARCHAR2(4000);
BEGIN
SELECT XMLRECORD INTO LISTSTRING FROM V_F_RO_COPY_KEYLIST WHERE RECID = RECKEY;
LISTSTRING := TRIM(LISTSTRING);
WHILE LENGTH(LISTSTRING) <> 0
LOOP
DELPOS := INSTR(LISTSTRING, ' ');
IF DELPOS = 0 THEN
DELPOS := LENGTH(LISTSTRING) + 1;
END IF;
--SELECT SUBSTR(LISTSTRING, 9, DELPOS - 9) INTO RTNVAL FROM DUAL;
SELECT TO_DATE(SUBSTR(LISTSTRING, 1, 8),'YYYYMMDD'), SUBSTR(LISTSTRING, 9, DELPOS - 9) INTO RTNVAL1 FROM DUAL;
LISTSTRING := SUBSTR(LISTSTRING, DELPOS+1, LENGTH(LISTSTRING)-DELPOS);
END LOOP;
RETURN(RTNVAL1);
END T24_GetCOPYBatchKeyAndDate;
END DF;
but i get compilation errors below is the error can anyone let me know whats the exact problem here and earlier i used this fucntion as PIPILINED and PIPE_ROW(RTNVAL).
It was working fine now i wanted to test this without pipeline fucntion.
SQL> SHOW ERRORS;
LINE/COL ERROR
19/5 PL/SQL: SQL Statement ignored
19/105 PL/SQL: ORA-00947: not enough values
SQL>Now...if you do a BULK inside the loop, then the collection get's overwritten every loop iteration.
So going back to the original post
replacing
WHILE LENGTH(LISTSTRING) <> 0
LOOP
DELPOS := INSTR(LISTSTRING, ' ');
IF DELPOS = 0 THEN
DELPOS := LENGTH(LISTSTRING) + 1;
END IF;
SELECT TO_DATE(SUBSTR(LISTSTRING, 1, 8),'YYYYMMDD'), SUBSTR(LISTSTRING, 9, DELPOS - 9)) INTO RTNVAL1 FROM DUAL;
LISTSTRING := SUBSTR(LISTSTRING, DELPOS+1, LENGTH(LISTSTRING)-DELPOS);
END LOOP;
with
WHILE LENGTH(LISTSTRING) <> 0
LOOP
DELPOS := INSTR(LISTSTRING, ' ');
IF DELPOS = 0 THEN
DELPOS := LENGTH(LISTSTRING) + 1;
END IF;
RTNVAL1.EXTEND();
RTNVAL1(RTNVAL1.COUNT()) := DATEKEYPAIR(TO_DATE(SUBSTR(LISTSTRING, 1, 8),'YYYYMMDD')
, SUBSTR(LISTSTRING, 9, DELPOS - 9));
LISTSTRING := SUBSTR(LISTSTRING, DELPOS+1, LENGTH(LISTSTRING)-DELPOS);
END LOOP;
should help
hth -
Bulk Collect with FORALL not working - Not enough values error
Hi,
I am trying to copy data from one table to another which are having different number of columns. I am doing the following. But it threw not enough values error.
Table A has more than 10 millions of records. So I am using bulk collect instead of using insert into select from.
TABLE A (has more columns - like 25)
c1 Number
c2 number
c3 varchar2
c4 varchar2
c25 varchar2
TABLE B (has less columns - like 7)
c1 Number
c2 number
c3 varchar2
c4 varchar2
c5 number
c7 date
c10 varchar2
declare
TYPE c IS REF CURSOR;
v_c c;
v_Sql VARCHAR2(2000);
TYPE array is table of B%ROWTYPE;
l_data array;
begin
v_Sql := 'SELECT c1, c2, c3, c4, c5, c7, c10 FROM A ORDER BY c1';
OPEN v_c FOR v_Sql;
LOOP
FETCH v_c BULK COLLECT INTO ldata LIMIT 100000;
FORALL i in 1 .. ldata.count
INSERT
INTO B
VALUES ldata(i);
END LOOP;
COMMIT;
exception
WHEN OTHERS THEN
ROLLBACK;
dbms_output.put_line('Exception Occurred' || SQLERRM);
END;
When I execute this, I am getting
PL/SQL: ORA-00947: not enough values
Any suggestions please. Thanks in advance.Table A has more than 10 millions of records. So I am using bulk collect instead of using insert into select from.That doesn't make sense to me. An INSERT ... SELECT is going to be more efficient, more maintainable, easier to write, and easier to understand.
INSERT INTO b( c1, c2, c3, c4, c5, c7, c10 )
SELECT c1, c2, c3, c4, c5, c7, c10
FROM a;is going to be faster, use fewer resources, be far less error-prone, and have a far more obvious purpose when some maintenance programmer comes along than any PL/SQL block that does the same thing.
If you insist on using PL/SQL, what version of Oracle are you using? You should be able to do something like
DECLARE
TYPE b_tbl IS TABLE OF b%rowtype;
l_array b_tbl;
CURSOR a_cursor
IS SELECT c1, c2, c3, c4, c5, c7, c10 FROM A;
BEGIN
OPEN a_cursor;
LOOP
FETCH a_cursor
BULK COLLECT INTO l_array
LIMIT 10000;
EXIT WHEN l_array.COUNT = 0;
FORALL i IN l_array.FIRST .. l_array.LAST
INSERT INTO b
VALUES l_array(i);
END LOOP;
COMMIT;
END;That at least eliminates the infinite loop and the unnecessary dynamic SQL. If you're using older versions of Oracle (it's always helpful to post that information up front), the code may need to be a bit more complex.
Justin
Edited by: Justin Cave on Jan 19, 2011 5:46 PM -
Hi,
I have written this procedure and I am getting
LINE/COL ERROR
69/5 PL/SQL: SQL Statement ignored
83/11 PL/SQL: ORA-00947: not enough values
CREATE OR REPLACE PROCEDURE f_t_s (P_F IN VARCHAR2)
IS
TYPE quote_cols_rt IS RECORD
twitter_gid twitter.twitter_gid%TYPE,
twitter_xid twitter.twitter_xid%TYPE,
origin_location_type twitter.origin_location_type%TYPE,
destination_location_type twitter.destination_location_type%TYPE,
is_hazardous twitter.is_hazardous%TYPE,
perspective twitter.perspective%TYPE,
twitter_option twitter.twitter_option%TYPE,
servprov_gid twitter.servprov_gid%TYPE,
origin_search_value twitter.origin_search_value%TYPE,
destination_search_value twitter.destination_search_value%TYPE,
domain_name twitter.domain_name%TYPE,
is_customer_rates_only twitter.is_customer_rates_only%TYPE
TYPE twitter_cols_tt IS TABLE OF twitter_cols_rt INDEX BY PLS_INTEGER;
twitter_cols_t twitter_cols_tt;
BEGIN
SELECT all_spec twitter_gid,
SUBSTR(all_spec,7) twitter_xid,
'location_code' origin_location_type,
'location_code' destination_location_type,
'N' is_hazardous,
'B' perspective,
'O' twitter_option,
'INDIA.'||servprov_xid servprov_gid,
SUBSTR(tm,1,2) ||':'||SUBSTR(tm,3) origin_search_value,
Location_xid destination_search_value,
'INDIA' domain_name,
'N' is_customer_rates_only
BULK COLLECT INTO twitter_cols_t
FROM
(SELECT x.*,
Q.twitter_gid
FROM
(SELECT 'INDIA.FS_'||H.servprov_xid||'_'||D.Location_xid||'_'||T.tm all_spec,
servprov_xid ,
tm ,
Location_xid
FROM
(SELECT Location_xid
FROM location
WHERE location_xid IN ('1')
AND domain_name ='INDIA'
) D,
(SELECT servprov_xid
FROM servprov
WHERE(servprov_gid LIKE 'P_F%'
AND SUBSTR(servprov_xid,2,1) IN ('2'))
OR servprov_gid ='INDIA.FRESHMISC'
) H,
(SELECT lpad(rownum-1,2,'0') ||'00' tm FROM sea WHERE rownum<25
UNION
SELECT lpad(rownum-1,2,'0') ||'30' tm FROM sea WHERE rownum<25
) T
) x,
(SELECT * FROM twitter WHERE twitter_gid LIKE 'INDIA.FS%'
) Q
WHERE x.all_spec=Q.twitter_gid(+)
WHERE twitter_gid IS NULL;
FORALL i in 1 .. twitter_cols_t.count
--LOOP
INSERT
INTO twitter
(twitter_gid ,
twitter_xid ,
origin_location_type ,
destination_location_type,
is_hazardous ,
perspective ,
twitter_option ,
servprov_gid ,
origin_search_value ,
destination_search_value ,
domain_name ,
is_customer_rates_only)
VALUES
twitter_cols_t (i);
--END LOOP;
END f_t_s;
Any idea where I am doing mistake
Thanks in Advance,
DIDIHi,
That was my typing mistake....
This is correct code
CREATE OR REPLACE PROCEDURE f_t_s (P_F IN VARCHAR2)
IS
TYPE twitter_cols_rt IS RECORD
twitter_gid twitter.twitter_gid%TYPE,
twitter_xid twitter.twitter_xid%TYPE,
origin_location_type twitter.origin_location_type%TYPE,
destination_location_type twitter.destination_location_type%TYPE,
is_hazardous twitter.is_hazardous%TYPE,
perspective twitter.perspective%TYPE,
twitter_option twitter.twitter_option%TYPE,
servprov_gid twitter.servprov_gid%TYPE,
origin_search_value twitter.origin_search_value%TYPE,
destination_search_value twitter.destination_search_value%TYPE,
domain_name twitter.domain_name%TYPE,
is_customer_rates_only twitter.is_customer_rates_only%TYPE
TYPE twitter_cols_tt IS TABLE OF twitter_cols_rt INDEX BY PLS_INTEGER;
twitter_cols_t twitter_cols_tt;
BEGIN
SELECT all_spec twitter_gid,
SUBSTR(all_spec,7) twitter_xid,
'location_code' origin_location_type,
'location_code' destination_location_type,
'N' is_hazardous,
'B' perspective,
'O' twitter_option,
'INDIA.'||servprov_xid servprov_gid,
SUBSTR(tm,1,2) ||':'||SUBSTR(tm,3) origin_search_value,
Location_xid destination_search_value,
'INDIA' domain_name,
'N' is_customer_rates_only
BULK COLLECT INTO twitter_cols_t
FROM
(SELECT x.*,
Q.twitter_gid
FROM
(SELECT 'INDIA.FS_'||H.servprov_xid||'_'||D.Location_xid||'_'||T.tm all_spec,
servprov_xid ,
tm ,
Location_xid
FROM
(SELECT Location_xid
FROM location
WHERE location_xid IN ('1')
AND domain_name ='INDIA'
) D,
(SELECT servprov_xid
FROM servprov
WHERE(servprov_gid LIKE 'P_F%'
AND SUBSTR(servprov_xid,2,1) IN ('2'))
OR servprov_gid ='INDIA.FRESHMISC'
) H,
(SELECT lpad(rownum-1,2,'0') ||'00' tm FROM sea WHERE rownum<25
UNION
SELECT lpad(rownum-1,2,'0') ||'30' tm FROM sea WHERE rownum<25
) T
) x,
(SELECT * FROM twitter WHERE twitter_gid LIKE 'INDIA.FS%'
) Q
WHERE x.all_spec=Q.twitter_gid(+)
WHERE twitter_gid IS NULL;
FORALL i in 1 .. twitter_cols_t.count
--LOOP
INSERT
INTO twitter
(twitter_gid ,
twitter_xid ,
origin_location_type ,
destination_location_type,
is_hazardous ,
perspective ,
twitter_option ,
servprov_gid ,
origin_search_value ,
destination_search_value ,
domain_name ,
is_customer_rates_only)
VALUES
twitter_cols_t (i);
--END LOOP;
END f_t_s;
Thanks,
DIDI -
PL/SQL: ORA-22806: not an object or REF when Using Record in Package
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
I have declared a record type in my package
create or replace
PACKAGE MYPKG AS
TYPE MYREC IS RECORD (VAL1 varchar2(20), val2 date);
PROCEDURE display_error (pSQLERRM number);
PROCEDURE P_LOAD_DATA (pStartDate Date, pEndDate Date);
FUNCTION F_EPI(refno1 in NUMBER, refno2 in NUMBER) return MYREC;
END MYPKG;
--In My Package Body
FUNCTION F_EPI(refno1 in NUMBER, refno2 in NUMBER) return MYREC is
F_param MYREC;
BEGIN
select myvarchar2, mydate into MYREC from MYTable
where myrefno1 = refno1
and myrefno2 = refno2
Exception
when others then
display_error(SQLERRM);
RETURN F_param;
END F_EPI ;
PROCEDURE P_LOAD_DATA (pStartDate Date, pEndDate Date) IS
insert into atable(myvarchar, mydate)
select F_EPI(refno1,refno2).val1,F_EPI(refno1,refno2).val2 from tab2;
END P_LOAD_DATA;
I get errors
Error(187,7): PL/SQL: SQL Statement ignored
Error(225,7): PLS-00382: expression is of wrong type
Error(225,7): PL/SQL: ORA-22806: not an object or REF
When I compile the package.
When I try to call the function from SQL I get an Invalid datatype error.Hi,
Before posting any query/plsql blocks, please ensure that you have written it clean and complete with less syntax errors. ( at least general syntax errors, you can avoid). Then somebody can have an interest to check your logical error.
About your posting, refer below solution step-by-step. It may help you, about what you are looking for? By the way, you must be knowing, what you are going to to do with. I haven't concentrated about your requirement; as it was not missing in your posting.
drop table test;
create table test(myvarchar varchar2(20), mydate date);
create or replace
package mypkg as
type myrec is record (val1 varchar2(20), val2 date);
--procedure display_error (psqlerrm in number); -- if you are passing sqlerrm, then parameter needs to be string type
procedure display_error (psqlerrm in varchar2);
procedure p_load_data (pstartdate in date, penddate in date);
function f_epi(refno1 in number, refno2 in number) return myrec;
end mypkg;
Package created.
--in my package body
create or replace
package body mypkg as -- added
procedure display_error (psqlerrm in varchar2) -- if you are declared a proc/func in spec, it needs to define in pkg body
is
begin
null; -- you should know, what to do here
dbms_output.put_line('Err -'||sqlerrm);
end display_error;
function f_epi(refno1 in number,refno2 in number)
return myrec
is
f_param myrec;
begin
-- select myvarchar2, mydate into MYREC from mytable
-- where myrefno1 = refno1
-- and myrefno2 = refno2;
select ename, hiredate into f_param from emp -- added demo logic by using emp
where empno = refno1
and mgr = refno2;
return f_param; -- added
exception
when others then
raise; -- if you are using OTHERS then, just raise it
display_error(sqlerrm);
--return f_param; -- what is this?
end f_epi;
procedure p_load_data (pstartdate in date, penddate in date) -- you must be knowing the use of 2 params ???
is
v_rec myrec; -- added
begin -- Added
--insert into atable(myvarchar, mydate)
-- select f_epi(refno1,refno2).val1,f_epi(refno1,refno2).val1 from tab2;
-- demo logic added with static params to call f_epi
v_rec:= f_epi(7499,7698);
insert into test values v_rec;
--null;
end p_load_data;
end mypkg;
Package body created.
SQL> exec mypkg.p_load_data(null,null);
PL/SQL procedure successfully completed.
SQL> select * from test;
MYVARCHAR MYDATE
ALLEN 20-FEB-81
Thanks! -
Error(20,22): PL/SQL: ORA-00942: table or view does not exist
I am getting currently getting an error when I try and insert into a table from a different schema from my Stored Procedure:
Error(20,22): PL/SQL: ORA-00942: table or view does not exist
I am explicitly calling the table with the schema name infront i.e.
INSERT INTO SAPSR3.ZTREC_NAME_TYPE
MASTER_ID,
NAME_TYPE,
FAMILY_NAME,
FIRST_NAME,
MIDDLE_NAME,
TITLE
VALUES
In_MasterID,
In_NameType,
In_FamilyName,
In_FirstName,
In_MiddleName,
In_Title
I only get this error when I try and compile my stored procedure. If I try this insert not within a stored procedure (i.e. a blank script) it works perfectly.
Can anyone tell me what Im doing wrong?
Thanks.Hi,
It sounds like you (the procedure owner) have privileges on that table only through a role.
Roles don't count in stored procedures created with AUTHID OWNER (which is the default).
Either
(1) Have user SAPSR3 grant the necessary privileges directly to you (or to PUBLIC), or
(2) change the procedure so that it runs with the caller's privileges, by adding AUTHID CURRENT_USER after the argument list but before the keyword IS (os AS) like this:
CREATE OR REPLACE PROCEDURE foo
( x IN NUMBER
AUTHID CURRENT_USER
IS ... -
Hello,
"C:\app\xps\product\11.2.0\dbhome_1" where is my installation of database oracle enterprise 11g; I use Windows 7 Pro.
I have in System PATH : C:\app\xps\product\11.2.0\dbhome_1\bin
I have in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > SYSMAN > OracleDBConsoleorcl : "ORACLE_HOME" value "C:\app\xps\product\11.2.0\dbhome_1"
When i execute "sqlplus / as sysdba" command, i receive error: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"
If i execute
set ORACLE_HOME=C:\app\xps\product\11.2.0\dbhome_1
C:\>set PATH=%ORACLE_HOME%\bin;%PATH%
sqlplus "/ as sysdba"
I don't receive Error.
Why?You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM. -
Error in Trigger ( PL/SQL: ORA-01744: inappropriate INTO)
Hi ,
I've written the trigger in the following format.. As the original trigger is around 700 lines, so just format is written here.. please co-operate..
CREATE OR REPLACE TRIGGER --
AFTER UPDATE OF COL1
ON TAB1
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
WHEN (NOT(OLD.COL1 IS NULL AND NEW.COL1=0))
DECLARE
rowToins PAK1.fdList;
i number;
BEGIN
IF :NEW.COL2='V' THEN
INSERT INTO DEST(
D_AT)
SELECT * FROM ( SELECT --
PAK2.FUN1('AD',TAB10.ID) AS D_AT
FROM ---
WHERE --- )
WHERE D_AT IS NOT NULL;
ELSEIF :NEW.COL2 ='H' THEN
SELECT * FROM ( SELECT --
PAK2.FUN1('AD',TAB9.ID) AS D_AT
BULK COLLECT INTO rowToins
FROM ---
WHERE --- )
WHERE D_AT IS NOT NULL;
i:=rowToins.FIRST;
WHILE i IS NOT NULL LOOP
--insert row 1
PAK1.fun2(rowToins(i).<col>,
i:=rowToins.NEXT(i);
END LOOP;
END IF;
END;
/The above code is giving the error..
PL/SQL: ORA-01744: inappropriate INTOSo how can i correct the code...
thanksThe line no..are
159/3 PL/SQL: SQL Statement ignored
213/16 PL/SQL: ORA-01744: inappropriate INTO
159 --> the first where condition in the example code
213 --> the select list column in the second if condition in example code
If i remove the
select * from (
PAK2.FUN1('AD',TAB9.ID) AS D_AT
WHERE D_AT IS NOT NULL;Then the trigger is created with no issues....
please let me know if i'm not clear
Edited by: josh1612 on Apr 27, 2009 3:42 AM -
While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.
I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps. -
I have Windows Vista computer. I am trying to upgrade my ITunes so can share files with other home computer. (Just got the new IPhone). I get this system error: The procedure entry point AVCFPlayerItemDurationChangedNotification could not be located in the dynamic link library AVFoundationCF.dll. Tries system restore and redownloaded...NOW Itunes will not even open. Can anyone help?
I uninstalled Apple Application Support, opened iTunesSetup with WinRar, and went down the list of msi's. AppleApplicationSupport was an install, all the others I did Repair. Did not have to reboot. Works okay now.
HTH -
I am trying to build an executible program that will be portable to machines which do not have CVI installed. It works fine on my CVI v9.1 system. However, whether or not I include "Full run-time support" in the build options, I get the error "The procedure entry point _UP_GetActiveTreeCell could not be located in the dynamic link library cvirte.dll" when I try to run it on a machine without CVI. Please help.
To run a CVI application on a system were the CVI IDE is not installed you need to have the CVI RunTime Engine installed. According to the error message at the bottom of this page you may have an older RTE installed in the target system.
To obtain it you can either download the RTE and install in the target system or better let the IDE build a distribution disk that installs all necessary software in it: this guide drives you in creating the appropriate installer for your application: you can find it also in CVI help function.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
Can't launch itunes due to the following error; The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaKey could not be located in the dynamic link library AVFoundationCF.dll.
Hey bcolden,
I would try uninstalling and reinstalling following the directions in here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
This section in particular contains important information in the uninstall process:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Best,
Delgadoh -
I can't get iTunes to install/start on my HP laptop. When I start/install the current version, I get the following error "The procedure entry point "JSStringGetUTF8String could not be located in the dynamic link library WebKit.dll". Why isn't this dll included in the distribution? What do I do to get iTunes to install on my 64-bit AMD HP laptop.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
PL/SQL: ORA-00913: too many values
I don't find out why i'mg getting an "ORA-00913: too many values" Error
This Example works fine:
DECLARE
TYPE session_type IS TABLE OF v$session%ROWTYPE ;
blocking_sessions session_type;
BEGIN
select * bulk collect into blocking_sessions from v$session where blocking_session is not null;
END;
But in this Example i'm getting an ORA-00913. Can anybody tell me what i'm doing wrong?
DECLARE
TYPE session_type IS TABLE OF v$session%ROWTYPE ;
blocking_sessions session_type;
BEGIN
select distinct blocking_session bulk collect into blocking_sessions from v$session where blocking_session is not null;
END;
select distinct blocking_session bulk collect into blocking_sessions from v$session where blocking_session is not null;
ERROR at line 7:
ORA-06550: line 7, column 70:
PL/SQL: ORA-00913: too many values
ORA-06550: line 7, column 1:
PL/SQL: SQL Statement ignoredOK this one works also:
DECLARE
TYPE session_type IS TABLE OF NUMBER ;
blocking_sessions session_type;
BEGIN
select distinct blocking_session bulk collect into blocking_sessions from v$session where blocking_session is not null;
END;
But when i'm selecting for about 20 columns of a table with 30 columns. Do I have to declare every single column? -
i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks
i have reset the ipad and restored it to no avail
Maybe you are looking for
-
I have a new iPhone 5. I am trying to get apps like instagram, facebook etc to upload pictures from my camera roll. When i try to get a picture from the camera roll it instructs me to go to settings - privacy - photos and turn access on. When I do th
-
Special offers, not showing same price on Buy Now
I have been interested in trying a Skype phone and noticed the RTX4088 in the Special Offers section as being 15% off, marked down from $117.49 to $99.87. But, when I click on Buy now, it takes me to a cart page and the price jumps to $146.86 marked
-
Determining duration of sequence of clips
Hi, In FCP 4.5 - I know how to measure a single clip's duration on the timeline, but is there an easy method to measure the time duration of a larger sequence of clips? I realize I can look at the start timeline timecode and the ending one and comput
-
Hi, In our Heirarch, we have Cash, AR, Interco and a few others under Current Assets. I'm trying to build a balance sheet and show all of the dependant members under each of these, but the only way I can do this with a huge expansion like this: DEP
-
Create iPad or AppleTV version bug...
Maybe I'm missing something here but I have a home movie done in widescreen for an iDVD project. I also like to put these on my AppleTV. Before the iTunes upgrade I would have it convert the file for AppleTV and everything was fine. Now the option in