Error in Production Load: Error passing data to port

Hello All,
I got this unexpected error in production. The Jobs are still processing for a long time(in Yellow status) with the error message :
Extraction (messages): Missing messages      (Status:Yellow)
     Missing message: Request received      (Status:Yellow)
     Missing message: Number of records sent     (Status:Yellow)
     Missing message: Selection Completed     (Status:Yellow)
Transfer (IDocs and TRFC): Missing messages or warnings           (Status:Yellow)
     Request IDoc : Application document posted                (Status:Green)
     Info IDoc 2 : sent, not arrived ; Error passing data to port      (Status:Yellow)
     Info IDoc 3 : sent, not arrived ; Error passing data to port      (Status:Yellow)
     Info IDoc 1 : sent, not arrived ; Error passing data to port      (Status:Yellow)
I went through the below forumn, and asked the basis to look in to it. In the meantime can any one please suggest me any solutions.
Some problem with IDoc's Settings while loading data

Hi Ram,
The problem may be with the connection to the source system you are loading the data from. You can check the connection using the note 140276.
Best Regards,
Des.

Similar Messages

Info IDoc : sent, not arrived ; Error passing data to port

Hi Folks,
While I am loading the data from R/3 I am facing the following error in Production..
Info IDoc 2 : sent, not arrived ; Error passing data to port
when I checked in SM59 every thing seems fine like RFC test connection and authorization check
In BW is check the Source system saying it is Ok.
Only the thing I found here is in TRFC, it is error when opening RFC Connection.
but it is different in SM59 saying every thing is ok, as said above..
Please help me in this regard
thanks masters
DJ

Srinivas,
Thanks for your prompt reply..
user : ALEREMOTE and password are fine..
As told I check st22 and sm21 in both sytems, no sort dumps I found..
Please help me its an urgent..
thanks
DJ
Message was edited by:
Jangareddy dasari

Error passing data to port

Hello,
I use extractor 1_CO_PA1100V04.
I see that data are uploaded. Diagnosis - current process not finished :
Number of records like that
15.42:10 (68888 from 0 records)
Errors in details :
sent, not arrived; Error passing data to port
Selected number dores not agree with transferred number
What is the problem? What is solution for that problem?
A

Hi Aleksandrs,
there must be an error logged somewhere. Please check out the weblog /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks for analyzing the issue.
regards
Siggi

Outbound IDOC( Error passing data to port)

Hi,
We have an interface running daily configured such that the idocs are converted to files and placed on a directory path.
All the idocs are processed successfully but for one hour the idocs failed and the error message says:
Status: Error passing data to port
Error at OPEN (Directory path) with operating system error msg.:No such file or directory.
The missed data from the error idocs have been sent via PFAL.
But again after this one hour the idocs were successfully posted for the same directory path.
Please let me know what the issue can be here or how can we avoid this.
Thanks.

Hi
*Some times it may happen that IDOC doesnt reach to the port , in case if you are using Transactional RFC port so*
*you can use the report RSEOUT00 for sending the IDOC to port .*
*Hope it may help you .*

IDoc Status 02 Error passing data to port

Hi Experts,
I wrote a custome program to send customer via HTTP XML port. This program collects customer and send in single IDoc as per specified batch size.eg if batch size is 5 then 5 custome will be send in one IDoc. On devlopment environment it was working fine upto batch size 500. In quality single customer is transfering successfully but while selecting a batch size arround 100 it is displaying error 'Error passing data to port' with status 02.
Please help me to be out of this.
Regards,
Ravinder

status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

IDoc_02_Error passing data to port-Communication error when sending with HTTP

Hello All,
We are receiving the error "02_Error passing data to port-Communication error when sending with HTTP", when sending the idoc to PI from ECC system.
Observation:
1. Some idocs are failing and immediately after sometime the same type of idocs with different idoc numbers are getting successful.
Eg: Orders. One purchase order is failing at one point of time. later another purchase order is getting successful after some time to the same partner.
2. If i perform the reset of idoc, then it is getting delivered during next scheduled job run.
please help me in resolving the issue.
Regards,
Ch. Venkat.

status 02 is Error passing data to port ...it simply means your port setting has some problem. do configure your port setting and also in partner profile
Thanx and Regards
Arpan Maheshwari

Error Brief : Guideline load error in 856_4010_UCS

In 856 outbound:
we are getting below error in the production environment,but it works fine in TEST environment.
Error Brief : Guideline load error.
Error Description Error : Guideline was not provided in selector configuration for level 'Group'. Please check configuration and resubmit your data.
C
I have tried by uploading group ecs file also, after uploading group ecs the above error gone,but in the wire message the group segment is missed,like below
ISA*00* *00* *01*74754350 *08*1234567 *130829*1606*U*00401*368062916*0*P*>
ST*856*291606366
BSN*00*000455667684433*20130829*1606*0001

Not sure if you are hitting the same Missing group segments in 834 Outbound EDI

Getting a "DDE Master Control.vi" error, along with Load Error Code 21

I am attempting to isntall and run the IAEA Nuclear Reactor Simulators on my work machine.
The simulators are a proprietary code packaged in a Labview wrapper, and distributed as Labview EXE files.
I have installed (copied the files off the provided DVD...there is NOT an installer) them in the same location on two machines, both running Win7, one home, one office. The only difference is the home machine is running Win7 64, and has a "Program Files (x86)" folder, where I installed it instead of "Program Files".
On the home machine, the simulator starts and runs BEAUTIFULLY on the first try.
When attempting to run the EXE on the work machine, the simulators throw:
"An error occured loading VI 'DDE Master Control.vi'
LabVIEW load error code 21: An external subroutine required for execution could not be found."
A handful of times, then:
"A subVI is not executable. The full development version of LabView is required to fix the errors."
The simulator then lands on the startup screen but will not initiate.
The home machine has NO labview components installed, not even the Runtime environment, and it works fine. As you can see, this is becoming quite confounding and frustrating.
I've attempted installing the RTE, VISA, and DAQ on the work machine to no avail.
Any assistance is greatly appreciated.

Hi Benjaming,
Please take a look at this KB which explains how to solve LabVIEW load error code 21.
LabVIEW Load Error Code -21 When Running an Executable
http://digital.ni.com/public.nsf/allkb/78579B0FAA17F92286256993006A6473
Regards,
William
Applications Engineer
National Instruments

Deployment of windows firewall policy error message: Provider Load Error

How do i resolve this error?
SCCM deployment status for Windows Firewall configuration policy shows a lot of errors With errorid 0x80041013 Provider Load Error.
The eventlog has logged a WMI warning:
A provider, WindowsFirewallConfigurationProvider, has been registered in the Windows Management Instrumentation namespace Root\Microsoft\PolicyPlatform\WindowsFirewallConfiguration to use the LocalSystem account. This account is privileged and the provider
may cause a security violation if it does not correctly impersonate user requests.
Source WMI Event-ID: 63

I've seen similar errors with WMI corruption, bad component registration in WMI, or permissions issue in WMI. For some more information see also:
http://blogs.technet.com/b/configmgrteam/archive/2009/05/08/wmi-troubleshooting-tips.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

BI - Error passing data to port

Hi,
We have issues executing an info-package in BIQ200 (BIQ SYSTEM).
It uses RFC to get the data from ECQ220 (ECQ DEV SYSTEM).
The data is then written to a PSA file in BIQ200.
The process should end with a green status indicator. However it is not
ending and just times out.
Please note that this functionality worked before doing the Remote
client copy from productions system ECPCLNT320 to our ECQCLNT220. All
RFC destination are properly defined. Please note that this
functionality was working correctly before the remote client copy.
Attached are some screen shot. I am not sure if the setting in WE21 for
the transactional rfc "A000000015" should be changed from "SMXCLNT200"
to "BIQCLNT200". I noticed that the transcational rfc for "A000000016"
is BIDCLNT100 and "A000000017" is "BIPCLNT300" as per the attached
screen shot.

I checked sm21, st22 and background jobs in BIQ 200 and everything seems looks fine except for 1 job as noted below. This job could be for something ealse I checked RSM0 --> Monitor Node --> 0ACCOUNT (5/26/2010) ECQCLNT220 (Red Alert: 18082 from 0 Records) . It seems like the data is pulled from ECQCLNT220 but the records just hangs to update in BIQCLNT200. Below is the log for RSMO.
RSMO LOG
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Job log overview for job:    BI_PROCESS_CHAIN / 0400012A
Date       Time     Message text                                                                                Message class Message no. Message type
05/26/2010 04:00:13 Job started                                                                                00           516          S
05/26/2010 04:00:13 Step 001 started (program RSPROCESS, variant &0000000032064, user ID RFC_USER)                         00           550          S
05/26/2010 04:00:13 Start process CHAIN ZNGK_MASTR_TEXT in run D853A0PTCQ592DBNG11QE7V16 of chain ZNGK_MAST_DATA_LOAD     RSPC          156          S
05/26/2010 04:00:14 Chain Is OK                                                                                RSPC          028          S
05/26/2010 04:00:16 Chain ZNGK_MASTR_TEXT was removed from scheduling                                                     RSPC          026          S
05/26/2010 04:00:16 Chain changed! Scheduling in display mode not possible                                                RSPC          113          I
05/26/2010 04:00:16 Process did not report an instance -> no log                                                          RSPC          057          E
05/26/2010 04:00:16 Job cancelled after system exception ERROR_MESSAGE                                                     00           564          A

Idoc error -- ' error passing data to port - status 02'

Hi All,
      The IDoc gets created with error status 02. The error occured in the
production system. We have not got this error for the last 7 months since we went live and we have not made any changes either.
      The following is the error message that i get,
<b>Error at OPEN '/usr/sap/edidata/out/O_20070104_220042 with operating system error msg.: ' (check path name)
Message no. E0099
Diagnosis
An error occurred when an outbound file was opened with 'OPEN DATASET'. The name of the outbound file is:
/usr/sap/edidata/out/O_20070104_220042with operating system error msg.:No such file or directory
Procedure
1. Check whether the directory exists and is linked for the SAP System.
2. If yes, check whether there is any space in the file system.
3. If the file already exists, check the authorization and the owner.</b>
Has it got anything to do with the year beginning ?
Help me resolve this issue.
Regards,
Disney.

Ravikumar,
    I processed the errored idocs from tcode bd87, it got processed successfully.
Can you tell me how to check,
1. If the disk space is full or not.
2. Authorization for the user.
Regards,
Disney.

I am triggering My IDOC for XI interface Error passing data to port

Hi All
when i checked the partner profile , it is givng the error as this one , and i dont to how to go for this one
No Message Control entry for this entry

Hi Sridhar,
Cross check with this weblog:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Sachin

Error on BD87 -Error Passing data to Port

Hi All,
I'm facing an issue with ECC Quality system to BI Quality in BD87, In Logical System For Quality client ->IDocs in outbound Processing->RSINFO->E0(266): Could not find code page. I have done restore and connection test in SM 59, connection is fine, but still issue persists.
Regards
#Alex

Hi,
Could not find codepage. Seems to look like a language sync issue between the two systems.
Also unicode and non-unicode settings on the systems need to be checked. Further check the unicode settings on the RFC between the systems.
Regards,
Srikishan

Error in Delta load; error in source system

Hi,
I'm extracting from 0FI_AA_11.
Performed a full load.
Then initialized without data transfer.
When i run delta (0 records) , it fails with 'error in source system' .
Strangely, when I run delta again in REPEAT mode, it runs succesfully.
this is happening everytime i run delta.
Please help

FI_AA_11 is sure capable of handling delta.
It does have some dependencies with master data and these are pretty awkward sometimes.
I don't know when you are running your deltas (during opening hours from the office?) but in your process chain also the MD objects must be present.

Sql loader error

I am using sql loader command line sqlldr to load 141306 records into my table. It ended with an error message --
SQL*Loader-605: Non-data dependent ORACLE error occurred -- load discontinued.
Checking for data load failures
Checking Log data for clinic_biotox table data load
90970 Rows successfully loaded.
78 Rows not loaded due to data errors.
And moreover (90970+78 = 91048) which is much less than 141306
Any ideas as to what might have happened ?
Thanks

Have you checked the sqlldr log file (the name of which you should have supplied at the command line)? This sometimes provides additional information as to what occurred.
I would also say that the reason why your record counts do not tally up like they should would be because the error occurred before sqlldr was able to complete the load.
The last thing I can offer would be for you to check what your allowable error threshold is within your logfile. It could be that you exceeded the allowable number of bad records and as such caused the load to fail.
Hope this helps...

Error in Production Load: Error passing data to port

Similar Messages

Maybe you are looking for