Error in reconciling pluggable mapping

Hello Everybody,
When i try to reconcile pluggable maapings, i get the error
"MMM1058: Access invalid property 1 in array property."
Could any one suggest what can be the cause of this error.
We are using OWB 10G R2 (10.2.0.2.0).
Thanks in advance.
Sunil.

Hi,
The scenario I am trying to test is a multi mapping scenario where I am trying to split one source message and create two target messages by using two different receiver interfaces, one for each message.
I am on PI 7.1 and when I test message mapping and operation mapping using the payload from SXMB_MONI, it is successful. Whereas when I test the scenario end to end I am getting the following error messages:
Operation Mapping
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Name
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Namespace
http://accenture.com/1:N_multi-mapping
Runtime error
Split mapping created no messages
Start tag ns0:Messages Add raw attribute xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge" Start tag ns0:Message1 Close tag ns0:Message1 Start tag ns0:Message2 Close tag ns0:Message2 Close tag ns0:Messages
Could someone please help
Cheers,
S

Similar Messages

MMM 1064 Error when adding pluggable mapping

OWB ver 11.2.0.1
9802120 patch has been applied, but not exactly which "version"
Created a standalone pluggable mapping. It is pretty basic: Source table -> Filter ->Aggregator -> Subquery Filter -> Output Signature.
When I attempt to add the pluggable mapping to an existing mapping (either by dragging the PM from the Projects Navigator, or going through the Component Palette), I get the following error:
MMM 1064: Value 98F36D...E390EC not valid in domain IN_MATCHING_ATTRIBUTE
Any ideas on how to fix this?

Sorry for the delay, but another fire sprang up.
I created a pluggable mapping consisting of a table and filter and was able to drop it onto another mapping (I didn't go further and try and connect it). Went back to the pluggable mapping, deleted the lines from the filter to the output signature, and added the aggregate and sub-query filter. I get the error when the revised pluggable mapping is dropped onto another mapping.
For grins, I got rid of the sub-query (it was an IN type), and did what I wanted "old-school" - brought in a second instance of the table, and joined it to the aggregation. I was able to add this version to a mapping.
Client hasn't applied the 11.2.0.2 patch, so I am guessing it is something fixed in the patch.

Pluggable Mapping causing VLD 1600 validation error

We are using OWB client 11g R2 on windows. I am trying to use the pluggable mapping functionality to use for our reference data lookups, whereby we want to retrieve full descriptions in several languages from the reference data table. The standalone mapping takes in two parameters in the input signature, both NVARCHAR2, a reference type and reference code to perform the lookup. There is then a key lookup whose output (5 NVARCHAR2 values) goes to an expression which has a CASE statement to evaluate the results before passing them to the output signature.
The problem is when using the pluggable mapping in a normal mapping it does not validate, and I am getting the VLD-1600: Lookup Condition for Key Lookup REF_DATA_APEX is blank. error. The key lookup of course does have a Lookup Condition.
The mapping is a simple one, taking a source and mostly mapping directly to the target. It is set based only. I have one source attribute being passed to the pluggable mapping along with a constant, and the output is passed to an expression (which doesn't actually do anything, but without this I got API8003 error when connecting the output attributes to the target attributes).
Is there something I am missing in how to implement this feature ?

Hi,
I am having the same problem with pluggable mapping and lookup operator, when mapping is syncronized it gives error VLD1108. I believe it is a bug of OWB 11.2.0.2.
Did you manage to resolve it?
Thanks,
Alex

EXPLAIN PLAN with pluggable mapping

Dear Folks,
I have a mapping with a pluggable mapping included. When I try to get the EXPLAIN PLAN TREE I receive an error: 'ORA-00904: "FULLPACKAGENAME"."CONSTANT_0_SITUATION_1":invalid identifier'.
The EXPLAIN PLAN REPORT says in the first line: Error: cannot fetch last explain plan from PLAN_TABLE
When I search for 'CONSTANT_0_SITUATION_1' I can find things like:
(SELECT
"WH_JOIN_GSMNMBR_PORTINGDATA"."GSS_VOI_ID" "FACT1_ID",
"WH_JOIN_GSMNMBR_PORTINGDATA"."BEGINDATE" "FACT1_BEGINDATE",
"WH_JOIN_GSMNMBR_PORTINGDATA"."ENDDATE" "FACT1_ENDDATE",
"INGRP2"."FACT1_MIN_BEGINDATE" "FACT1_MIN_BEGINDATE",
"INGRP2"."FACT1_MAX_ENDDATE" "FACT1_MAX_ENDDATE",
FULLPACKAGENAME."CONSTANT_0_SITUATION_1" "SITUATION_1"
What is 'FULLPACKAGENAME'???
I can validate my mapping and this is OK. I checked the pluggable mapping again and again, all seems to be right. I can run the mapping and it works. Just need to tune it.
I'm working with OWB 11.1 on a 10.2.g DB
Can please someone help me?
Greetings
S.

Hi,
if you generate the sql in the mapping editor, the sql may not run directly. FULLPACKAGENAME will be replaced my the mapping name during deployment. The constants you define in the mapping will be pl/sql-variables of that package.
To make the sql work, you have to replace the FULLPACKAGENAME.xxx expressions with correct values manually.
Do you have the most recent patch installed? In owb 10gr2 the values from the constants as well as the default values of the mappings are set correctly from version 10.2.0.3 on.
Regards,
Carsten.

Pluggable Mapping Won't Fully Synchronize

I'm hoping there is perhaps just a config setting of some kind that governs how a pluggable mapping is embedding in a real mapping that is causing my problems.
The situation:
-Mapping A is my actual mapping.
-Mapping B is my pluggable mapping which implements a whole mess of stuff, including a very large and complex Joiner operator.
-Mapping A uses pluggable mapping B.
The problem:
I recently discovered that I had some errors in the join condition used by the Joiner in pluggable mapping B. I modified the join condition, etc, and saved. I then went into Mapping A and did an inbound sync on the pluggable mapping operator so that mapping A would pick up the changes I made to the join condition in pluggable mapping B.
Mapping A does not pick up the changes to the join condition when in generates. I have inspected the generated SQL by hand to confirm. I'm now afraid that syncing a pluggable mapping operator only picks up signature changes? But it seems absurd that when using a pluggable mapping in a regular mapping, the internals of the pluggable mapping would get so fully embedded before even generating, and that the only thing you can later change without having to delete and re-add the pluggable mapping operator is the signature?
Does anyone have any insight? I would really appreciate any thoughts. In reality, this pluggable mapping is used not by one, but by many regular mappings, and implements some really ugly logic that has a very wide input and out signature. So I really want to avoid that obvious solution of having to simply delete the pluggable mapping operator from the main mappings and add it again (which I'm darn sure would work), and have to reattach all the connections. It would take hours and hours.
Thanks in advance for any help.
-John

Well David, I owe you an apology for wasting both our time.
I have looked at it with a pair of fresh eyes this morning, and the problem was mine. As I think I mentioned in my original post, this pluggable mapping is actually used by a large number of regular mappings (about 15). Each of these regular mappings handle a different step in the loading a primary target table.
In my confusion, I had missed a sync in one or two, and had apparently been bouncing back and forth between one I had synced, and one I had not when looking at generated code. This caused me to think the syncing and generation were not occurring properly.
Too many late hours I'm afraid...
So again, I apologize for the wild goose chase, but really appreciated your input. It appears that the problem is solved (or never even existed) !

Synchronizing Pluggable mapping in main map

Hi,
I used a pluggable mapping in a map . If I do any changes in the pluggable map,
those are not reflecting in the map where that pluggable map is used. To reflect I opened the map and I used synchronise option . If I use that pluggable map in many maps , I have to open each and every map and selectiing the option synchronsie.. Is there any alternative way to synchronise the pluggable map with the main map without opening the map...
Regards,
Sivarama

Is this blog down? Or do I need special access?
Actually I hit the same problem... If I do it like this:
OMBSYNCHRONIZE PLUGGABLE_MAPPING 'PM_MAKE_ITEM_LEVELS' TO MAPPING 'MAP_DWH_ITEM_MASTER' OPERATOR 'PM_MAKE_ITEM_LEVELS' USE (RECONCILE_STRATEGY 'REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME')
I've changed the context to my project and to my module (DWH), which consists the mapping and get the following error:
OMB07003: cannot locate PM_MAKE_ITEM_LEVELS of type PLUGGABLE_MAPPING: OMB01065: Object type PLUGGABLE_MAPPING is not valid for folder DWH
I will be thankful for every hint!
Thanx in advance!
Steffen

Pluggable Mapping: java.lang.ArrayIndexOutOfBoundsException: 5

Hi,
I'm using OWB10gR2.
I got a "java.lang.ArrayIndexOutOfBoundsException: 5" when I try to insert a Pluggable Mapping (which is from a licensing point of view an expensive option).
The only thing I can do in such a case is to exit witout being able to save.
Has anyone an idear how this can happen?
Would be nice if application errors would be a bit better handeld by the new OWB release.
The exact error I got is:
java.lang.ArrayIndexOutOfBoundsException: 5
java.lang.RuntimeException: java.lang.ArrayIndexOutOfBoundsException: 5
     at oracle.wh.util.expr.WBBindableExpression.validate(WBBindableExpression.java:281)
     at oracle.wh.util.expr.WBBindableExpression.getTemplate(WBBindableExpression.java:307)
     at oracle.wh.repos.impl.mapping.CMPMapAttribute.internalUnbindExpressions(CMPMapAttribute.java:1207)
     at oracle.wh.repos.impl.mapping.CMPMappable.internalUnbindExpressions(CMPMappable.java:592)
     at oracle.wh.repos.impl.mapping.CMPMappable.internalUnbindExpressions(CMPMappable.java:592)
     at oracle.wh.repos.impl.mapping.CMPMapOperator.internalUnbindExpressions(CMPMapOperator.java:1297)
     at oracle.wh.repos.impl.mapping.CMPMapOperator.beforePersist(CMPMapOperator.java:1410)
     at oracle.wh.repos.pdl.foundation.DirtyCache.persist(DirtyCache.java:422)
     at oracle.wh.repos.pdl.foundation.DirtyCache.persist(DirtyCache.java:279)
     at oracle.wh.repos.pdl.foundation.CacheMediator.postChanges(CacheMediator.java:520)
     at oracle.wh.repos.pdl.foundation.CacheMediator.postChanges(CacheMediator.java:513)
     at oracle.wh.repos.pdl.foundation.CacheMediator.commit(CacheMediator.java:2079)
     at oracle.wh.repos.pdl.transaction.TransactionManager.commitGlobalTransaction(TransactionManager.java:340)
     at oracle.wh.repos.pdl.transaction.TransactionManager.commit(TransactionManager.java:456)
     at oracle.wh.ui.console.WorkBenchController.doRealcommit(WorkBenchController.java:1153)
     at oracle.wh.ui.console.commands.CommitCmd.performAction(CommitCmd.java:24)
     at oracle.wh.ui.editor.WindowHelpEventHandler.handleSaveAll(WindowHelpEventHandler.java:239)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.wh.ui.editor.listener.ReflectListener.invokeMethod(ReflectListener.java:41)
     at oracle.wh.ui.editor.listener.ReflectActionListener.actionPerformed(ReflectActionListener.java:33)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
     at java.awt.Component.processMouseEvent(Component.java:5100)
     at java.awt.Component.processEvent(Component.java:4897)
     at java.awt.Container.processEvent(Container.java:1569)
     at java.awt.Component.dispatchEventImpl(Component.java:3615)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Caused by: java.lang.ArrayIndexOutOfBoundsException: 5
     at oracle.wh.util.expr.WBBindableExpression.validate(WBBindableExpression.java:246)
     ... 46 more

Hi Carsten,
Thanks for your feedback.
I syncronised everything, the pluggable mapping as well as the mapping in which I used this pluggable mapping. But I still got the error.
The only workaround I found was to recreate the pluggable mapping.
I don't understand how such a exepnsive software generates a Java error instead an error which explains what has to be corrected.
Regrads
Maurice

Error while deleting a mapping

Hi all,
I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
     at oracle.wh.util.Assert.owbAssert(Assert.java:51)
     at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
     at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
     at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
     at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
     at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Thanks in advance!
Sebastian

These type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
Cheers
Si
Edited by: ScoobySi on Sep 10, 2009 11:44 AM

Error when deploying a map

hello i have the following error when deploying a map in a local database, the mapping is a simple transfert of data between two table,
ORA-06550: line 0, column 0:
ORA-04052: erreurs lors de la consultation de l'objet distant [email protected]@KCDBDEV
ORA-00604: une erreur s'est produite au niveau SQL récursif 1
ORA-01882: région de fuseau horaire introuvable
ORA-02063: pré
any help please
thanks,
tarek

Hello thank u for helping, i have exactly the same problème in Error executing a query using a DB-Link
but i am not inderstanding the solution, i found the same probleme in metalink, and the solution posted is:
1. Create an errorstack of the ORA-1882 to see the ALTER SESSION SET TIME_ZONE statement that is causing the ORA-1882 during deployment. To create this errorstack, follow step 1 to 4 below:
1. Just before you reproduce the error, open a SQL*Plus session with user SYSTEM.
SQL> alter system set events '1882 trace name ERRORSTACK level 3'
2. Deploy the mapping to reproduce the ORA-1882
3. Disable the system event
SQL> alter system set events '1882 trace name errorstack off';
4. Take a look at the errorstack (located in the udump directory). Suppose the following statement is in there:
ALTER SESSION SET TIME_ZONE = 'GMT+02:00'
2. Modify the run_service.sh(.bat) file as follow:
* For UNIX:
Modify owb_server_home/owb/bin/unix/run_service.sh as follows:
Add the parameter -Duser.timezone="+02:00" to the line where java is started (last line of run_service.sh)
$JAVAPATH/bin/java -Xmx768M -Djava.awt.headless=true -DORACLE_HOME.....
e.g:
$JAVAPATH/bin/java -Xmx768M -Duser.timezone="+02:00" -Djava.awt.headless=true -DORACLE_HOME
* For Windows:`
Modify owb_server_home\owb\bin\win32\run_service.bat as follows:
Add the parameter -Duser.timezone="+02:00" to the line where java is started
%JAVAPATH%\jre\bin\javaw.exe %JVM_OPTIONS%
e.g.:
%JAVAPATH%\jre\bin\javaw.exe -Duser.timezone="+02:00" %JVM_OPTIONS%
3. Save the file and re-start the Runtime Service using stop_service.sql/start_service.sql.
but in creating the errorstack of the ORA-1882 i not found the ALTER SESSION SET TIME_ZONE
and i Modify the run_service i fixed -Duser.timezone="+01:00" cause the time zone here is Europe/Paris but there is no changes.
the db link is from Oracle 10.2.0.2.0 to 9.2.0.1.0. and owb 10g R2
other solution?
thanks,
tarek

System error message while using maps check in

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Error in code page mapping for Source System

Hi All,
We are Loading data into BI system from MDM System.
It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
Message Class: RSDS_ACCESS 13.
We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
Any pointers for this error will be Helpful.
Regards,
Mayank

Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
any advice.. ?
Edited by: Edi Erwan Abu Talib on Jun 22, 2009 8:22 AM

Error in a clob mapping

Hi
I am using oracle 11g as both source and target database.
I am using a table having clob column as source and using expression (substr(col,1,4000))
then inserting into target table.
Sequence of the mapping is as follows
Source_table , joiner to other tables , expression_to_substring max 4000 , insert into target table
I get the below error
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 8000, maximum: 4000)
Deployment of mapping is good, I get this error while execution the mapping
Please can some one suggest ?
Is there any better way >
Regards
S
Edited by: WIP on Jun 12, 2012 12:59 PM

WIP wrote:
Hi
I am using oracle 11g as both source and target database.
I am using a table having clob column as source and using expression (substr(col,1,4000))
then inserting into target table.Can you use DBMS_LOB.SUBSTR(col,1,4000))
>
Sequence of the mapping is as follows
Source_table , joiner to other tables , expression_to_substring max 4000 , insert into target table
I get the below error
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 8000, maximum: 4000)
Deployment of mapping is good, I get this error while execution the mapping
Please can some one suggest ?
Is there any better way >
Regards
S
Edited by: WIP on Jun 12, 2012 12:59 PM

JDBC Sender Error "RuntimeException in Message-Mapping transformation"

Hi All,
I have JDBC as sender and i am able to poll the data from the database,which is available in SXMB_MONI but its giving an error "RuntimeException in Message-Mapping transformation".I have tested the mapping in TEST and its working fine but when i tested the same in configuration its throwing an error in Interface mapping(<NOT FOUND>).
I have also created a node <b>row</b> in my sender data type.
Expecting your help soon.
Thanks and regards,
Zabi.

Hi,
Check the data coming inside..the XI... that is before mapping..
Regards
Agasthuri Doss

Error in reconciling pluggable mapping

Similar Messages

Maybe you are looking for