Error in retrieving data in sap proxy

Hi, while trying do retrieve z function module in blank sap proxy (.net 2003) I get following error:
Registry entry Software\SAP\SAP .NET Connector not set
Parameter name InstallDir
I use SAP .NET Connector 2.0, and system is ecc 6.0 unicode. How to solve this?
Thanks in advance,

Hi,
check the below the links
http://help.sap.com/saphelp_nw2004s/helpdata/en/b4/79cb9463b89a41a73e1e2805eb4bf7/content.htm
https://media.sdn.sap.com/html/submitted_docs/dotnet/Programming%20with%20PDK%20for%20.NET/Connecting%20to%20SAP%20NetWeaver%20Systems/Using%20SAP%20.NET%20Connector.htm
please check the configuration is done properly or not.
let us know if u have nay issues,
Regards,
Ravi

Similar Messages

Errors found retrieving data after SAP Patching

Hi Team,
I received the error "errors found retrieving data" when I try to click
the ‘Refresh’ button to display data for my reports. Refer to the
attached screen.
I’m receiving it from trying to refresh data in ‘Reports’ and ‘Input
schedule’ templates from the BPC Excel Client. This was happen after we
done the SAP Patching earlier it was working fine.
Appreciate your help in advance
Thank you
Regards
Raghu

Hi,
Try to process all dimensions.
If not try to find more details from EPM-->More-->Log
Hope it helps..
regards,
Raju

How to retrieve Data from SAP BW to SQL

Hi All,
i am looking for way to retrieve Data from SAP BW to SQL.
Could you please give me some indcations or a document on how to implement it?
Thanks in advance
Cheers
Gilo

Hi,
You need to use open hub destination. third party tool destination for SQL
SAP BW TO SQL -- Extraction to the third-party tool can be executed as follows:
       1.      You define an open hub destination with Third-Party Tool as the destination type.
       2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
       3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
       4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
       5.      When the extraction process is finished, the system sends a notification to the third-party tool using API RSB_API_OHS_3RDPARTY_NOTIFY.
       6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
       7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.

API to retrieve data from SAP content server

Is there an API available to retrieve data from SAP content server?

Hi
you could check out function groups starting with OPT.
F.eks. OPTB, OPTC, OPTD
Also check function group ARCHIVOBJECT.
best regards
Thomas Madsen Nielsen

EVDRE encountered an error when retrieving data from web server

Hi
When I am trying to open Data Input=>Build a schedule using a dynamic template in BPC version for SAP netweaver, I am getting the below error "EVDRE encountered an error retrieving data from the Web Server".
I am not able to open any template, every time I am getting the same message. I have tried again after reprocessing all the dimension.
Even I have tried in appset APSHELL also, there also I am getting the same error
Request you to help me to resolve the above error which will allow me to proceed further.
Thanks in Advance.
Venkat

Hi,
Beside Nilanjan's solution, this error could also occur when the expansion is running more rows than the Excel limit allows (65'000 rows and 256 cols for Excel 2003)...
Even when you're using suppress field to reduce the number of rows, the first sequence is to retrieve the complete dataset before performing any suppression. And this could of course exceed the limit sometimes.
Hope this helps.
Kind Regards,
Patrick

Error while retrieving data from PL/SQL Table using SELECT st. (Urgent!!!)

Hi Friends,
I am using Oracle 8.1.6 Server, & facing problems while retrieving data from a PL/SQL Table:
CREATE or REPLACE PROCEDURE test_proc IS
TYPE tP2 is TABLE of varchar2(10); --declared a collection
dt2 tP2 := tP2('a','b','c');
i NUMBER(8);
begin
SELECT COUNT(*) INTO i FROM TABLE(CAST(dt2 as tP2));
DBMS_OUTPUT.PUT_LINE('**'||i);
end;
While executing the above procedure, I encountered foll. error:
ERROR at line 1:
ORA-00600: internal error code, arguments: [15419], [severe error during PL/SQL execution], [], [],
ORA-06544: PL/SQL: internal error, arguments: [pfrrun.c:pfrbnd1()], [], [], [], [], [], [], []
ORA-06553: PLS-801: internal error [0]
Can anyone please help me, where the problem is??
Is it Possible to retrieve data from PL/SQL TABLE using SELECT statement? & How ?
Thanks in advance.
Best Regards,
Jay Raval.

Thanks Roger for the Update.
It means that have to first CREATE TYPE .. TABLE in database then only I can fire a Select statement on that TYPE.
Actually I wanted to fire a Select statement on the TABLE TYPE, defined & declared in PLSQL stored procedure using DECLARE TYPE .. TABLE & not using CREATE TYPE .. TABLE.
I was eager to know this, because my organization is reluctant in using CREATE TYPE .. TABLE defined in the database, so I was looking out for another alternative to access PL/SQL TABLE using Select statement without defining it database. It would have been good if I could access a PLSQL TABLE using Select statement Declared locally in the stored procedure.
Can I summarize that to access a PL/SQL TABLE using SELECT statement, I have to first CREATE TYPE .. TABLE?
If someone have any other idea on this, please do let me know.
Thanks a lot for all help.
Best Regards,
Jay Raval.
You have to define a database type...
create type tP2 is table of varchar2(10)
CREATE OR REPLACE PROCEDURE TEST_PROC
IS
dt2 tP2 := tP2('a','b','c');
i NUMBER(8);
begin
SELECT COUNT(*) INTO i FROM TABLE(CAST (dt2 AS tP2));
DBMS_OUTPUT.PUT_LINE('**'||i);
end;
This will work.
Roger

Error while retrieving data from an ARRAY resultset

We hava an Oracle stroed procedure which has a table type as its OUT parameter and where the data is being entered into. This data requries to be returned to the Java client through a JDBC connection. We have used the OracleTypes' ARRAY object for this. We are facing errors when retieving data from the ARRAY resultset
The Oracle Package
----I created a table type called "PlSqlTable":
CREATE OR REPLACE TYPE PlSqlTable IS TABLE OF VARCHAR2(20);
----I defined this as the out parameter for my procedure :
PROCEDURE testSQL
arrayOutID OUT PlSqlTable
Then populated the object :
arrayOutID := PlSqlTable();
arrayOutID.extend(4);
arrayOutID(1):= 'Hello';
arrayOutID(2) := 'Test';
arrayOutID(3) := 'Ora';
----The procedure executes fine - all debug statements are printed ----right till the end of execution.
The Java class
----Here is how I have defined the parameters :
OracleCallableStatement stmnt = (OracleCallableStatement)connection.prepareCall("begin testSQL(?);end;");
stmnt.registerOutParameter(2,OracleTypes.ARRAY,"PLSQLTABLE");
System.out.println("Executing..");
stmnt.execute();
System.out.println("Executed..");
ARRAY outArray = stmnt.getARRAY(1);
System.out.println("Got array");
ResultSet rset = outArray.getResultSet();
System.out.println("Got Resultset..");
int i = 1;
while(rset.next()){
System.out.println("VALUE : " + rset.getString(i));
i = i+1;
----On execution, the debug messages display :
Executing..
Executed..
Got array
Got Resultset..
VALUE : 1
VALUE : Test
ERROR : java.sql.SQLException: Invalid column index
----But I have populated upto 3 values in th e procedure. Then why this error ?
PLLLEEEASE help me out on this.
Thanks, Sathya

haven't worked with db arrays but I think your problem is here:int i = 1;
while(rset.next()){
     System.out.println("VALUE : " + rset.getString(i));
     i = i+1;
}In the first loop you are retrieving the value from column 1(rs.getString(1)), which is OK, but in the second loop, you are trying to retrieve a value from the second column(rs.getString(2)) which doesn't exist. Try this code which only reads from column1:
while(rset.next()){
     System.out.println("VALUE : " + rset.getString(1));
}Jamie

Error in Importing Data from SAP BW ( XMLA )

HI All,
I am trying to import a physical schema from sap bw ( sap user has all grants ) through the XMLA access
IN repository I see objects ( connection pool, hierarchies, dimensions, measures ) and in a while I get them to the presentation layer accessible for users.
Though when I try to access data build the query I get the following error:
OPR3ONWY:U9IM8TAC:DI2DL65P
HY00 Code 10058 [NQODBC][SQL STATE HY0000][NQSError 10058] A general Error has occurred XMLA Error returned from the server.
Can you please help me in understanding how to solve the problem?
Thanks a lot.
Best regards to everybody.
Filippo

mithuu wrote:
HI Filippo,
Sorry to reply to this post,
Could u please tell me ...what shud be given in URL which is prompted when trying to Import data from SAP bw while creating a repository.
I am a beginner and tried to seek help from the sap basis guys but of no help.
Appreciate ur help,
Many Thanks...Hi Mithu,
Give the SAP Multi-Dimensional Database server URL and a username, password required to access it.
If you do not know them, ask your TL/PM, if u do not have one ask the SAP Data warehouse DBA.......
Venkat
Edited by: OBIEE+ on Jan 27, 2009 2:21 AM

Error message-retrieve data from database

I tried to retrieve data from oracle database. I got the following error message. I did compile the files without error. but when I run index.jsp I got the following error message. is it related with taglib Directives ?
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Exception in JSP: /index.jsp:8
5: <% AccessDB accessDB=new AccessDB(); %>
6:
7: <%-- create an instance of List, then retrieve SubjectNames --%>
8: <% List subjNames=accessDB.getSubjectName(); %>
9:
10: <%-- make list accessible to page --%>
11: <% request.setAttribute("subjNames", subjNames); %>
Stacktrace:
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
root cause
java.lang.NullPointerException
     org.AccessDB.getSubjectName(AccessDB.java:68)
     org.apache.jsp.index_jsp._jspService(index_jsp.java:62)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.
Apache Tomcat/5.5.17

Hi,
Try to print the value in List...n comment the request.setAttribute...n then run the program....
check wot value is printed in List....
This error may b because the List doesnt have anyvalue into it.....

ERROR- Unable to retrieve data from SAP systems

We have installed SAP Netweaver Gateway (NWGW) Tool plugin in mac os.
When we are trying to browse the services we are able to see only SDATA services in NWGW plugin.
So we have changed the service from ODATA to SDATA in gateway system. We are able to see the services in the NWGW plugin.
When we are trying to get the response in xcode by using the following code,
SDMConnectivityHelper *supConn = [[SDMConnectivityHelper alloc] init];
     LiteSUPUserManager *supUserManager = [supConn activateSUPModeWithHost:@"xxxx" andSUPPort:xxxx andSUPFarmId:@"0" andAppId:@"xxxx"];
     [supConn registerSUPUser:@"xxxx" andPassword:@"xxxx" andSecurityConfigName:@"Basic" andSUPUserManager:supUserManager];
     0262Service *service = [[0262Service alloc] init];
     [service setServiceDocumentUrl:[LiteSUPAppSettings getApplicationEndPoint]];
NSMutableArray *personalDataArray = [service get02PDWithData:[[supConn executeBasicSyncRequestWithQuery:service.02PDQuery] responseData] error:nil];
I am getting the following error
Returned Query URL: /02PD
ERROR :: SUPJsonException:expected string, found 140/Location:-[SUPRequest startSynchronous] + 1159
ERROR :: 400:Bad request/Location:-[SUPRequest startSynchronous] + 1184
Exception during parsing response data. Error: The document is not a valid data document
<?xml version="1.0" encoding="utf-8"?> <error ><message xml:lang="en">Malformed URL recieved :no protocol: /02PD</message> </error>
When I am trying to print the end point. I am getting null value
Please provide us the pointers to resolve the issue

Sounds like an SAP problem.

Error while retrieving data from sql using jdbc adapter

hi all,
i m working on one scenario where i m sending data using HTTP and receiver is jdbc adapter which is retrieving me data from sql server.
i have checked the structure both for req and res.
i m getting this error
<SAP:Error>
<SAP:Category>Application</SAP:Category>
<SAP:Code>MAPPING.EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_INF57285_DB_HR_RES_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:Stack>During the application mapping com/sap/xi/tf/_INF57285_DB_HR_RES_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
</SAP:Error>
can somebody help me with this.
Thanks & Regards
Aruna

thnks bhavesh i think i made it that way
JDBC REQ
<ns:INF57285_DB_Request xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<Employee>
    <EmpDetails action="SELECT">
      <table>EmpDetails</table>
      <access>
        <Name />
        <EmpId />
        <Band />
        <Salary />
      </access>
      <Key>
        <EmpId>57285</EmpId>
      </Key>
    </EmpDetails>
</Employee>
</ns:INF57285_DB_Request>
JDBC RES
<ns:INF57285_DB_Request_response xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<Employee_response>
    <row>
      <Name>aruna</Name>
      <EmpId>57285</EmpId>
      <Band>A</Band>
      <Salary>4675776</Salary>
    </row>
</Employee_response>
</ns:INF57285_DB_Request_response>
my hr req is which i mapped with DB req
<ns:INF57285_HR_Req xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<REQUEST>
    <EmpNo>57285</EmpNo>
</REQUEST>
</ns:INF57285_HR_Req>
my hr res is which i mapped with DB res
<ns:INF57285_HR_Res xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<response>
    <row>
      <Name>aruna</Name>
      <Empld>57285</Empld>
      <Salary>4675776</Salary>
    </row>
</response>
</ns:INF57285_HR_Res>
and interestingly i am not getting any error in sxmb_moni
it's not showing any error
plz suggest me something wht to do ....
thnks & regards
Aruna

Error while loading data into SAP BW using BO Data Services......

Hello All,
I have a job to load data from SQL Server to SAP BW. I have followed the steps got from SAP wiki to do this.
1. I have created an RFC connection between two servers(SAP and BODS Job Server)
when I schedule and start the job immediately from the SAP BW, i get this error and it aborts the RFC connection....
"Error while executing the following command: -sJO return code:238"
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Scheduler
Any help would be appreciated......
Thanks
Praveen...

Hi Praveen,
I want to know which version of BODS you are using for your development of ETL jobs?.
If it's BODS 12.2.2.2 then you will get this type of problems frequently as in BODS 12.2.2.2 version , only two connection
is possible to create while having RFC between BW and BODS.
So , i suggest if you are using BODS 12.2.2.2 version , then upgrade it with BODS 12.2.0.0 with Service PACK 3 and Fix Pack3 .
AS in BODS 12.2.3.3. we have option of having ten connection parallely at a time which helps in resolving this issues.
please let me know what is your BODS version and if you have upgraded your BODS to SP3 with FP3 , whether your problem is resolved or not..
All the best..!!
Thanks ,
Shandilya Saurav

Error while uploading data in SAP (me01)using LSMW

Hi All,
I am using LSMW for the first time.
I am trying to upload data to the Source List transaction (me01) using batch input recording. I created a new recording through LSMW itself. My source structure consists of 5 fields:
<b>MATNR C(18)
WERKS C(4)
VDATU N(8)
BDATU N(8)
LIFNR C(10)
EKORG C(10)</b>
Now the problem is when i try to convert the data, it gives me an error saying
"For type "C",a maximum length specification of 65535 is allowed."
I have noticed that unlike Direct Input method,
using batch input does not give any fields in "Maintain Field Mapping & Conversion Rules". So even if I have my fields in my source structure ,there are no fields to which I can map them to.
I don't know that is how it is when we go with batch input.
My file contain data in following order:
DANGEROUS GOODS,ABBY,20060801,20060831,30010,TEST
Pls help me to solve this problem.

Hi Swapna!
You get such an error message, when define a constant and forget the second ':
g_werks = '1000. "wrong
g_werks = '1000'. "correct
In general: a batch input recording can have fixed values and some variables. You need to define, which fields you like to fill with a variable. Go to the overview of the recordings, open the recording in change mode and assign some variable names to the according batch lines.
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/76/a05b69e8a411d1b400006094b944c8/frameset.htm">Editing batch input recordings</a>
Follow the help for the following steps of structure assignments.
Regards,
Christian

Error while retrieving data from SQL

HI All,
I am getting the below error while tryting to retrieve the data from SQL. Its working fine in developement server. But in production getting the below error.
**Mon Oct 6 05:02:49 2008]esbux106/survey/survey/kpmbatch/Info(1021013)**
**ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC SQL Server Driver][SQL Server]Cannot open database requested in login 'PD_OD**
**S'. Login fails.]**
**[Mon Oct 6 05:02:49 2008]esbux106/survey/survey/kpmbatch/Info(1021014)**
**ODBC Layer Error: Native Error code [4060]**
Iam using essbase 6.5 with Oracle as database. Please Advice.

From the error message..
[DataDirectODBC SQL Server DriverSQL Server
Why is it trying to use a SQL Server Driver to open a Oracle Database? Do you have the ODBC connection on the prod box setup to use the correct driver?

Error in retrieving data from database

Hi,
I'm now developing a program using servlet and oracle 8.1.5.0.0
I've encountered this error while I run my program:
NullPointerException
What does this means?
When I compiled that time, there is no error on the program.
Is it caused by there is no any parameter received by the database when it tried to retrieve the data but I have used the
request.getParameter("name") method to get the parameter and passed on to the database.
What's wrong with it..Please help me..
Your help will be much appreciated.
Thank You/
Regards,
Josephine

You may want to post the error stack and a small amount of source code. As you most likely are aware, the null pointer exception is a generic java error. It means that something has tried to execute a method or value from an object that is null. It is rearly (if not never) found at compile time.

Error in retrieving data in sap proxy

Similar Messages

Maybe you are looking for