Error in Run Time in smartform

Hi frds
In smart forms im getting error messages while run time.the message is "zcdpos-newtotval is not in form..."
Can pls wat this mean and resolve it .
Thanks
Pari Vendhan.R

It seems that you're referencing a field wich is no longer available.
Check your code.
Best regards.

Similar Messages

Create the pages at run time in smartforms

How to create the pages at run time in smartforms????

Hi..
You cannot create pages at run time, however you can decide based upon conditions and using commands in Smartforms, which page needs to be displayed next.
Those pages should be created beforehand.
Regards,
Karthik

Error While Run time

Hi,
Pls help me to solve my problem. My coding is comple well while run time it showing me the error,
Fatal Error: The value of attribute "xsi:schemaLocation" associated with an element type "null" must not contain the '<' character.
The value of attribute "xsi:schemaLocation" associated with an element type "null" must not contain the '<' character.pls help me as soon as possible

It's not your coding. The XML document which contains that attribute is not well-formed.

How can i set print mode at run time in smartforms???

Hi expert,
In smartforms how can I set print mode at run time.
I have one screen.In this screen one check box is there.If user select that check box then print should be come double side otherwise it is coming single side.
If it is possible then plz give me answer asap.

Hi,
Set These settings
While calling smartform, paas control_parameters and output_options as mentioned below and set
user_settings = ' '.
It will send the smartform output to spool.
DATA: wa_output_options TYPE ssfcompop,
wa_ctrl TYPE ssfctrlop.
wa_output_options-tdimmed = 'X'.
wa_output_options-tddelete = 'X'.
wa_output_options-tdimmed = ' '.
wa_output_options-tddest = 'LOCL'.
wa_ctrl-no_dialog = 'X'.
CALL FUNCTION lv_fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = wa_ctrl
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = wa_output_options
user_settings = ' '
x_adrp = x_adrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Kumar(Reward if helpful).

Error at run time of a form

Hi,
I am new to Oracle forms and reports. I have created a form, compiled and build successfully. But when I run the form it is showing an error saying "FRM-10142: The HTTP is not running on My Computer at port 7777. Please start the listener or check your run time preferences" . Please let me know the solution for this. I am using Oracle 10g forms and reports.
Thanks in Advance.

>
Hi, and welcome to the forums.
I am new to Oracle forms and reports. I have created a form, compiled and build successfully. But when I run the form
it is showing an error saying "FRM-10142: The HTTP is not running on My Computer at port 7777. Please start the
listener or check your run time preferences" . Please let me know the solution for this. I am using Oracle 10g forms and reports.You want to go here [url https://forums.oracle.com/forums/forum.jspa?forumID=82]here - the forms forum (try saying that
quickly ten times in a row ;) ) - you'll receive more appropriate help there.
Please close off this thread and repost your question there.
Don't forget to read the FAQs for the forums you post to. If you have pure Oracle SQL questions in the future, please
also read the sticky thread by BluShadow at the top of the list of posts on the home page of this forum.
HTH,
Paul...

Relocation error at run time.

Hi All,
I am getting a weird run time symbol relocation error on Solaris 2.6 with a C++ code compile by Workshop Compiler version 5. I built a shared library that statically links libCstd.a. This is my first question. Does CC Workshop compiler by default brings in libCstd.a in its standard mode(compat=5)?? (i understand this is its standard behaviour as given by sun documentation) After building the shared library, i built an xecutable that loads this shared library but i get the following unresolved
external :
Output dump from console :
ComponentFactory's constructor
[ComponentFactory::getComponent] libName: libibmxmlutil.so compName: XMLUtil
Function found...
Component::setLibrary Library addref::Ref count Component addref::Ref count ld.so.1: testcf: fatal: relocation error: file /vobs/cmn/midware2/sapi_base/debug/libcomponentfactory.so: symbol __1cDstdNbasic_ostream4Ccn0ALchar_traits4Cc___2l6MI_r1_: referenced symbol not found
Killed
Now this symbol which is *****21MI_r1*** belongs to libCstd.a and i have statically linked this libCstd.a when i built libcomponentfactory.so. Still i am wondering why this symbol is never a part of libcomponentfactory.so. I did an nm -A libcomponentfactory.so and tried to grep on the particular symbol. This symbol is UNDEF in symbol table. ANY HELP WILL BE GREATLY APPRECIATED.
thanks--
mail me at [email protected] if you have any suggestions.

Oops ! That was for Workshop 6 (CC 5.1). For Workshop 5.0, you
can try installing the corresponding latest C++ patch:
Patch-ID# 107311-12
Synopsis: C++ 5.0: Patch for C++ 5.0 compiler
(Bug id # 4347423 - Build 5.0 libCstd.a with -KPIC)
One workaround is to build a shared version of libCstd from libCstd.a
and use the shared library instead of the archive:
CC -G -z allextract libCstd.a -h libCstd.so.1 -o libCstd.so.1 -lCrun
ln -s libCstd.so.1 libCstd.so
Hope this helps.
Thanks,
Gopinath.

CONVT_NO_NUMBER error in run time

when report run will get CONVT_NO_NUMBER run time error:
the reson for the exception is:
the progam attemptted to interpret the value "12,000" as a number,
but since the value contravenes the rules for correct numner formats,
this was not possible.
the program code as follow:
tables: mard.
data c1(2) type c.
data name(10) type c.
data: begin of wa_out,
      d00 type mard-labst value 12,
      d01 type mard-labst value 13,
      d02 type mard-labst value 14,
      d03 type mard-labst value 15,
      d04 type mard-labst value 16,
      d05 type mard-labst value 17,
      d06 type mard-labst value 18,
      d07 type mard-labst value 19,
      d08 type mard-labst value 20,
      d09 type mard-labst value 21,
      d10 type mard-labst value 22,
      d11 type mard-labst value 23,
      d12 type mard-labst value 24,
      d13 type mard-labst value 25,
      d14 type mard-labst value 26,
      d15 type mard-labst value 27,
      d16 type mard-labst value 28,
      d17 type mard-labst value 29,
      d18 type mard-labst value 30,
      d19 type mard-labst value 31,
      d20 type mard-labst value 32,
      d21 type mard-labst value 33,
      d22 type mard-labst value 34,
      d23 type mard-labst value 35,
      d24 type mard-labst value 36,
      d25 type mard-labst value 37,
      d26 type mard-labst value 38,
      d27 type mard-labst value 39,
      d28 type mard-labst value 40,
      d29 type mard-labst value 41,
      d30 type mard-labst value 42,
      d31 type mard-labst value 43,
      total type mard-labst,
      end of wa_out.
DATA: get_name(20) type c.
DATA: data_1 type mard-labst.
do 32 times.
c1 = sy-index - 1.
if c1 < 10.
concatenate 'wa_out-d0' c1 into name.
else.
concatenate 'wa_out-d' c1 into name.
endif.
write (name) to get_name.
condense get_name no-gaps.
data_1 = get_name.
write:/ c1,data_1.
enddo.
beclause i want the variable "data_1" to clac in next step.
so how i can change my report can't happend CONVT_NO_NUMBER .
thank you

Hi
Is this the output you are trying to get from your report
0             12.000
1             13.000
2             14.000
3             15.000
4             16.000
5             17.000
6             18.000
7             19.000
8             20.000
9             21.000
10            22.000
11            23.000
12            24.000
13            25.000
14            26.000
15            27.000
16            28.000
17            29.000
18            30.000
19            31.000
20            32.000
21            33.000
22            34.000
23            35.000
24            36.000
25            37.000
26            38.000
27            39.000
28            40.000
29            41.000
30            42.000
31            43.000
It has worked fine for me
Regards
Pavan

Showing error during run standard dunning smartform

Hi,
When i run sap standard dunning smartform (F150_DUNN_SF) ,
it shows following error
Printing dunning notices using SMARTFORMS,error during parameter transfer

Hi,
Please varify whether you are passing all parameters properly .

Error 63 run-time engine

Hi, I'm trying to communicate with an instrument through TCP/IP using AK protocol. I've created a VI that works fine on my PC where I have installed Labview 2011.
When I create an executable from this VI to use it on a PC without Labview, it does not work and I receive the error 63.
Of course, I've have installed run-time engine and also VISA run-time, and I use the same configuration on the port (same ip address and port).
Moreover, the executable works also fine on my pc as well as the VI.
Have you got any suggestion?

Error 63 is "LabVIEW: The network connection was refused by the server.".
Is the target machine on the same subnet as the instrument?
No routers/firewalls between the two devices?
Net nanny/web filtering/firewall turned off on the target PC?
Instrument doesn't have to be configured to allow connections from the target machine's IP?
My guess is network configuration. Try pinging the instrument's IP from the target machine, see if that goes through.
First thought was missing drivers/modules, but since you've got VISA and RTE installed, I think you're covered there.

Error when running time evaluation

Hi,
When I am running time evaluation I got this error "start of pair formation changed from 20040101 to 20081212"
I am using TM01 schema. Please help me out with this error.
Thank you
Shravan

Hi Shravan,
Please check infotype 0007 if the work schedule has changed fron 01/01/2004.
Also please check the generated workschedule used for that employee , if the config has changed and that work schedule has been re- generated with a different DWS.
Thanks.

How i can fix "Wiki setting error" and "Running time error" ?

I've found this message when using server app on Mountain lion.
and this error data.
Can i fixed this? Thanks guys!

It so happens that I saw an answer to a similar question today somewere else. I have not tested this myself:
"I have the final solution and fix but beware you may not like it that much.
Having had all of the above problems with more or less everything I finally pieced it all together from various threads. This will fix both the AEBS control and the central services problems. Dont shout at me for being a bit basic and not coding etc. but it worked for me. If I can avoid code I do as often as possible as am less likely to balls it up!
This method will loose some data but the main files and users do remain
The Fix:
1. Close Server.app
2. Library/Server make a copy of Server file under a diff name as software server files and a few others would appear to still be usable and you will have to re download it all again of you dont copy it back in ( I didn't and now have learned my lesson). then delete the whole of the Server file.
3. Go to Keychain and search all Airport then delete associated keys permissions etc
4. Delete Server.app and reinstall.
5. Start new setup and it will migrate properly with no errors. This time a big green tick will appear!
6. Replace the software update files into the new Library/Server folder if you want to or leave it untill the rest is done
7 Reconfigure any missing bits..... any enrolled devices will have vanished but probably if you have saved the data from this in Library/Server prior to deletion you may be able to reinstate this but I didnt risk it
This is going to be a total pain if in a large organisation but once working the system is excellent with no swapping from one control set to the other. As each service is switched on it auto configures the AEBS and no further errors and a joy to work with unless you really like to get into the nuts and bolts.
Hope this helps and good luck"

Error at run time When Access Web Service in web dynpro java

Hi
I am used web service created on other machine.I am used wsdl file created in web service.
is there any setting on J2EE Engine server for accessing web service? after run web dynpro application it gives following error.
The initial exception that caused the request to fail, was:
   java.io.IOException: Unable to open connection to host "128.9.125.6:8000". Connection timed out:could be due to invalid address.
    at com.tssap.dtr.client.lib.protocol.Connection.openSocket(Connection.java:2117)
    at com.tssap.dtr.client.lib.protocol.Connection.open(Connection.java:1380)
    at com.tssap.dtr.client.lib.protocol.Connection.sendInternal(Connection.java:1534)
    at com.tssap.dtr.client.lib.protocol.Connection.send(Connection.java:1427)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    ... 50 more
please help me.
thank in advance

Hi,
java.io.IOException: Unable to open connection to host "128.9.125.6:8000". Connection timed out: could be due to invalid address. first check it are you able to connect the WSNavigator. I think you are not able to connect the WSNavigator and are you able to see the WebService in WSNavigator?
Procedure
To import a Web service model, proceed as follows:
       1.      Choose the context menu entry -
Create Model on the -
Models node of the relevant component.
       2.      In the model wizard, choose Import Web Service Model followed by Next.
       3.      In the second wizard window, enter a model name and specify the package and source code directory. The name of the proxy package is created automatically when you specify the model package.
       4.      Select whether your Web service source is from a local server, is addressed using a URL, or whether it is a UDDI service.
       5.      If you select Local File System or URL, choosing Next will take you to the following window in which you enter a local WSDL URL or select one by choosing Browse.
       6.      If you selected the option UDDI or URL, choosing Next will take you to the following wizard window in which you either enter a WSDL URL of a UDDI service directly or select one by choosing UDDIu2026
Enter the WSDL description of the Web service in the Wsdl field u2013 for example, http://webservices.matlus.com/scripts/emailwebservice.dll/wsdl/IemailService for an e-mail service.
You do not need to make any entries in the next step, Proxy Definition / URI Package Mappings. Choose Finish to close the window.
       7.      Switch to the Package Explorer view, select the file lport1.lp in the directory \src\packages\<myPackage>\, and check the port entries.
Hope this helps!!
Regards
Vijay

Error in run time

hi team
i have this error appears when i make run for my form
ORA-12560 TNS: protocol adapter error

First step:
IT could be a DNS problem (Resolve hostname) try to set IP instead of the hostname in theTNS.
or better write here you tnsnames.ora

Installing on Windows 7, IE, get error message "run time error has occured in script"

when attempting to install latest version of Flash Player on Windows 7 computer with IE, during installation I get message "runtime error has occured in script".
& installation ceases. what can I do to obtain Flash Player on my computer? Aaron

100,000 Thank you"s! I tried what you suggested, and can now
watch PLAYON through my Roku on the TV set. Previously, Roku insisted that I have Adobe Flash Player. Aaron
Senators Should Wear Uniforms like NASCAR Drivers So We Could Identify Their Corporate Sponsors.

Please help me!!! error in run time about connecting ldap in Tomcat 4

I had a class which used to connect to ldap which is bellow:
import java.util.*;
import javax.naming.*;
import javax.naming.directory.*;
public class ADLogin
protected Hashtable env = new Hashtable();
String _hostname="sisqn074";
String _port="389";
public ADLogin()
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.SECURITY_AUTHENTICATION, "simple");
public boolean authenticate(String username , String password, String domainName)
boolean b=false;
try{
env.put(Context.SECURITY_PRINCIPAL, username.trim() +domainName.trim());
env.put(Context.SECURITY_CREDENTIALS, password);
InitialContext ctx = new InitialDirContext(env);
b=true;
catch( AuthenticationException e){
e.printStackTrace();
b=false;
catch(NamingException e){
e.printStackTrace();
b=false;
finally{
//System.out.println("finally");
return b;
//set port
public void setPort(String aport){
_port=aport;
//set host name
public void setHostname(String aName){
_hostname=aName;
//initialize
public boolean initialize(String aHostname,String aPort)
setPort(aPort);
setHostname(aHostname);
env.put(Context.PROVIDER_URL, "ldap://" + hostname + ":" + port);
return true;
and I run those codes in tomcat 4.1.21
now I have a problem , when I use the authenticate method, I use a invalid username which should triger an exception when binding, if the passoword is null , there are no expections and the authenticate would return true on invalid username.
Those codes is ok in IBM WeBsphere.
Who can help me ?
please and thanks.

hi
not passing the password, on some directory servers provide u wid an
annonymous bind and thats what is happening.
better get this value checked by a javascript for not allowing
empty password fields
cheers
v0d00

Error in Run Time in smartform

Similar Messages

Maybe you are looking for