Error in saving site as a template

hi,
i have created a site http://mysrvr/sites/test and i added - 20 doc libs and 8 splists, custom master page, discussion forum, calendar control and uploaddocumentcustom web part and custom
css file- as per my requirement . and i saved this site as as a template -
myGenericTempl.wsp. and when i have uploaded the resulting wsp to another site collection. and when i tried to activate this wsp, i was getting multiple errors.
1) enumeration constarint is failed
2) second time, i was getting the error " publshing site feature activate failed .. with featureid { 2344 }."
can someone help, by giving any pointers why this is happening.
also when i tried to navigate to create a new group/ site settings page, i am getting server eror in application.
first of all, would like to know whether http://mysrvr/sites/test cant be saved as a site template?
or is it not supported?

Yes you can save http://mysrvr/sites/test as template
But Publishing feature does not support "Save Site as Template" option
http://support.microsoft.com/kb/2492356

Similar Messages

Getting general error when saving site using "create PDF from"

I'm using Adobe Acrobat Professional 8.0.0 for Mac, trying to save websites. This started working fine, but I had to shut down in the middle of a site being saved. Now when I try to save a site using Web Capture/create PDF from I get a "general error, nothing was saved". What do I need to do, remove, replace, reinstall or whatever to get this feature working again?
Also can anyone tell me how to set the feature that saves web pages with the headers and footers showing date, time, URL, page title, etc. I often use the print feature (save to PDF) and up until a day or so ago it always saved with those headers and footers. Now they're missing, which is what prompted me to try saving entire sites, above. I remember setting these a long time ago and being able to choose what went on the left, right,header and footer, but I cannot find those settings now.
Thanks,
Michele

Well, after downloading Applejack, I am completely confused. I'm not sure I understand what will happen if I do any of these steps: see 3a.. "clean out all cache files including the Launch Services database and any cached User Pictures". What kinds of things will I lose? Can I choose only the Acrobat cache files? I don't want to have to spend hours or days resetting things as I'm in the middle of a project with a close deadline. I also don't really understand fully what will happen with all the other things they discuss. The instructions say (I just copied and pasted these):
3. Auto mode: You can let the script run through its tasks automatically by typing 'applejack auto'. If you want the machine to automatically restart at the end of its tasks, use 'applejack auto restart'. You can also tell the computer to shut down automatically at the end by using the command line 'applejack auto shutdown'.
3a. Deep Auto mode: If you want to let AppleJack clean out all cache files, including the Launch Services database and any cached User Pictures, use 'applejack AUTO' instead. Use this if you still have problems booting after running AppleJack already.
4. Interactive mode: To run through just one task, or to run the script manually, type 'applejack' and then choose tasks from the menu. Running the script in interactive mode has the benefit of giving you options for working with user level cache and preference files, not just the default system level caches and preferences. To select an option, type the highlighted number or letter associated with the action, and then hit return. Whenever you enter a choice in AppleJack, you will need to hit return for that choice to take effect.
4. Corrupted preference files are moved into a directory that will mirror the original preference directory, with (Corrupt) added to the directory name. For example, corrupt preferences files found in ~/Library/Preferences will be moved to ~/Library/Preferences (Corrupt). After running AppleJack, you'll probably want to take a look at them (and most likely throw out those folders). As of version 1.4.2, AppleJack now creates a copy of the directory tree inside the (Corrupt) folder so that if any files were deeply nested inside the original preference folder, they will be placed in an identical directory hierarchy in the new (Corrupt) folder. This way, if for any reason you would want to move a preference file back, you know where it should go.
6. AppleJack has a primitive logging mechanism. It writes a journal of most of its activity to /var/log/AppleJack.log. AppleJack will automatically reset the log the next time you run it, if the file should ever reach a size somewhat over 500k.

Field type TaxonomyFieldTypeMulti is not installed properly when opening Site columns page or saving site as template

I have a site collection which I am moving from a SharePoint 2013 enterprise server to a SharePoint 2013 foundation server. This all seems fine apart from when I try and access the Site columns page (from Site settings) or when I save a Site as a template
- both times I get the error: Field type TaxonomyFieldTypeMulti is not installed properly
If I look in the SharePoint logs I get the following:
Unable to locate the xml-definition for FieldName with FieldId '249a1c1a-5a3e-4173-abad-779b01892510
Any ideas?
Many Thanks,
Jenny

I have re-done the migration from Enterprise to Foundation and now get the following error:
Field type RatingCount is not installed properly. Go to the list settings page to delete this field.
However I cannot go to the Site columns page as I get this error so don't see where I can delete this from? Previously I had to delete this field manually from each of the Blog sites but this time there don't
appear to be these fields to delete - I presume because I disabled all the features relating to this premigration?
Any ideas?
Many thanks in advance,
Jenny

Dreamweaver Template Error: Error reading file (Site Location/info) returned incomplete data

Hello!
I am working on new website we are creating for our company. I have never really had any Dreamweaver template file errors before...so this one has me really stumped! We purchased the site files from Template Monster and I have contacted their tech support, but I have not had much luck with them.
I started out by creating the Dreamweaver template folder that includes the template files that I would like to use. I started creating some pages using the template. I placed all the html pages in the main folder of the website. When I go to update the template to those pages I get the following error: "Error reading file (Site Location\Folder name\Dreamweaver template name) returned incomplete data".
I am not sure what I am doing wrong. Any help and advice would be greatly appreciated!
The site is a CSS based site with a Flash navigation menu. Since it is in the production phase, I do not yet have it placed on a server so you can take a look at it at this time (although if really needed and we cannot find an answer, I may be able to get the test site on line - if someone thinks they can help me answer this problem by viewing the site). Right now the site is housed in the same place we house all of the other sites we have produced and all of our other templates on our other websites work just fine. The main difference with this site is that we did purchase files from Template Monster to help speed us along during the construction of the page structures and also this site has a Flash Navigation Menu and a few other Flash elements (something our other sites do not really have).
I am using Abobe Dreamweaver CS5 and Windows 7
Thanks again for taking the time to help find and answer to this problem!
-J

I am curious as to why no one likes them around here.
They have spammed these forums in the past.
The code on their pages is rarely 'best-practice' code.
There are much better choices available.
My co-worker and I have to share the files, since we are editing the site together. The files are not local on our computers, but on the company's f drive that have Novell on it.
This arrangement is a recipe for disaster. The correct way to collaborate on a site with a colleague is with the following setup:
Each of you must have a LOCAL site (local to your workstation)
You would use a single remote location as a staging area, so each of you would have a site definition that specifies your own workstation for the local site, and the same network shared location as the Remote site
You will both need to enable Check In/ Check Out
You will both have to agree to PLAY BY THE RULES!
One (or both) of you will also need to have a second site defined that has the staging server as the local root folder, and would have the PRODUCTION server as the remote site. I'll explain how to use this site soon.
When you use CI/CO, your 'gold-standard files' are on the staging server. To begin working, you would connect to the staging server, and double click on a file, which will a) fetch the file from the staging server to your local site, and b) CHECK OUT the file to you. As long as you have the file checked out, it cannot be edited by your colleague. When you are done with your edit, you would CHECK IN the file (which uploads it to the staging server). It can now be edited by your colleague.
When you add templates to this scenario, things get even more complicated, although manageable. If you ever need to make a change to a template you must use the following procedure:
ALL FILES MUST BE CHECKED IN - this includes both you and your colleague.
One of you would connect with the SECOND SITE, open and edit the template, and save it propagating the changes to all "LOCAL" files (i.e., on the staging server).
Each of you would then need to return to the FIRST SITE, and again check out any files you want to work on.
When changes are done, and files are ready to publish, connect to the SECOND SITE, and upload the files from STAGING to PRODUCTION.
Does that make sense? It's important that it does.
I need to add in one more tab/link to the Flash nav bar.
Using Flash for navigation is a VERY POOR CHOICE, unless you also have redundant, text-based navigation on the pages. By using Flash to navigate, you guarantee: a) your pages will not be spiderable by search engines, b) your pages will not be navigable by iPlatforms, and c) your pages will be inaccessible to anyone browsing with screen assistive devices. Someone is making bad decisions about this site, in my opinion.

What actually happens when one deactivates 2010 Solution (saved site template)

I've come to the conclusion that a saved Site Template (Solution) cannot be edited. But I came across some articles that alluded to taking the WSP file off-line and hacking on it. So I went to "Save" it and SP says I have to deactivate it
first. Figuring no one would be trying to create a new site in the next few minutes it would take me to save it, I tried to deactivate it. Then I get the warning that if I deactivate it existing sites spawned from the template will lose functionality.
What are they talking about?

First of all, you should be able to download the solution (wsp) without having to deactivate it.
Second, I've deactivated site template solutions a countless number of times and have never had any issues. Are you referring to the following warning?
Warning: Deactivating this solution turns off the capabilities of this solution. Some parts of this site may no longer function. You may want to check the usage of this solution before deactivating it.
If so, that will not affect the sites created using the template. It's a generic warning for all "Solutions" and in most cases apply to features, web parts etc that gets used in multiple sites and deactivating it would cause it to break its functionality.
Manaz Mohideen - MCPD, MCITP, MCTS

Unable to create a subsite based on the generic template - save site as a template

hi,
am using a save site as a template functionality to create a sub site. when i select the custom template, and click on ok button,am getting server error in appln.
in the site template i have
1) 2 document libraries with permissions broken[ stop inheritance]
2) 4 Groups created L1, L2,L3,L4
am stuck with , how to proceed/ create a subsite based on the template site
note i have uploaded the wsp file in the new site collection and activated it . ma getting the custom site template name in the tab.
would like to get clarification about the custom permissions:
if i break the permissions on the document libraries, will this sec.permissions be intact, [ not changed] as the orginal ? i mean if i broke the permissions, in the newly created subsite also, will the permissions be broken? i need this broken functionality
as per my requirement.
help is highly appreciated!
Das

hi,
am not bale to get the correlation id. am getting server error in application. yellow page error!!
and regarding the permissions i have checked this blog
http://sergeluca.wordpress.com/2011/06/02/sharepoint-2010-save-as-template-what-is-saved-what-is-not-saved/
Serge says that, if i am not wrong,
we cant perform stop inherit the permissions for the doc lib and create a sub site based on this site template.
also if i stop inheriting from site permissions also.
can anyone from MSFT, pls confirm this. or any msd doc says about this.
Das

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Error while saving layout for report

Using BIEE 11. (Win64 Server 2003 R2 - russian edition)
When designing layout for report and putting text field (dos'nt matter - russ or engl) - I get an error during saving - 'Error when saving layout' (trunslated from russ)
This happens only when putting text field, with other types of filds all is ok!
Where can I find more detailed info about my error?
Also when I choose layout from existing e.g. - Dashboard.xpt and save - I get the same error. When I cut off all text fields from this template - I can successfully save it.
Thanks

Check the OSS note 550760 regarding the issue.

Error while saving for Objective setting

Hi,
While saving the Objective setting templates i am getting the error as "Table HRPAD605 is not part of the Customizing object PDST T "
Error documentation is as follows
Diagnosis
Entries in table HRPAD605 cannot be edited in connection with customizing object PDST T as table HRPAD605 does not belong to customizing object PDST T, according to the object definition.
System Response
The function terminates.
Procedure
Check whether the entered objects and keys are correct.Then check in the Implementation Guide whether the object was created correctly.
Correct the object definition or the entry for the Transport Organizer interface.
Thanks

Hello,
Most likely the is an inconsistency with the transport objects PDST and PDWS. Please run RHSOBJCH to correct this inconsistency.
Afterwards you should be able to transport the templates via the catalog or via RHMOVE30. Please make sure that the category ID in the target system is the same otherwise you won't be able to locate the template.
The report RHSOBJCH corrects the missing HR entries in the OBJS table.
This step you need to perform only once. For OSA you need to overtake
*5020 up to *5026, also PAD605,606 and 607 references.
When you have done this (as said, only need to do it once) you can transport the categories and templates via the phap_catalog_pa transaction (righ-mouse click on the to be transported object).
Hope this helps,
Regards and Groetjes,
Maurice

Error while saving config in MSY

Hi,
I am working on taking MSA 5.0 SP7 go-live. I am working in MDW. I posted a SDN post long back regarding the custom partner functions in MSA and got it resolved (followed the note 521871). I am trying to do the same in the PROD system and i am facing errors:
-> When i goto Cross-Component Settings->Relationship Categoty-> click on NEW i am getting the errors:
1. 'MTBLLFW-The attribute destination of the business object
relation type is not valid'.
2. 'MTBLLFW-the attribute source of the business object relation
types is not valid'
But it is allowing me to add an entry. When i save my customer entry i am getting the error :
3. 'UI_CORE_SAVE_FAILED_STA-Errors while saving'.
I ran the consolidated prefill for 5.0 and SP07. I followed the same procedure as i did in DEV. In DEV i never got these errors. I was able to create them in the first attempt.
If anyone has any idea please let me know.
Thanks in advance,
Karuna.

Hi,
did you already check i.e. compare the customizing subscriptions for both DEV MDW and PROD MDW sites?
Also you should check & compare the download monitor for CDB load in the CRM system(s).
I assume sth is missing there (see also your other post).
Regards,
Wolfhard

Font licensing error when Saving?

I use Illustrator CC and get a licensing error when saving designs with downloaded fonts.
The designs look fine on my computer and fine when I open them from my drop box account.
The problem comes when others open the design, the fonts change to Arial in most cases, which is causing design issues.
This is even happening when the design is saved as a PDF.
How do I solve this problem?
Can I get licenced fonts?
Where are they available?
Many thanks for reading.

You can have your other contacts download and install the same fonts
or
you can select all the text in your document and create outlines of the fonts, printers often ask for this option.
or
You can purcahse fonts from say Adobe and if I am not mistaken you can have those installed on five work stations, I do not know if you are allowed to consider a colleague as legal user of the fonts. And I do no recall if the number of seats for the fonts have changed but it used to be five seats. As I recall.
or
you can purcahse from My Fonts as well http://www.myfonts.com but again the other contacts ave to have the fonts installed as well check out how many seats for the fonts ypoouare entitled to and if that includes remoe sites for the seats.

Save a published Access services database site as a template with contents does not work

Hi
I have a Access site on the SharePoint. I wanted the site to be duplicated to another subsite, I then did the usual - save site as a template with contents and made a copy of it, however it does not work. I have been getting the error as stated below
error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'Default'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
However, it works if I make a local copy and publish it to the subsite? How does access services work on SharePoint and why the template option can't be chosen.

Hi cally, check the following links for possible solutions:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/1e2b77ba-4cfa-4aa3-97e4-b7b39fbd46fd/error-with-ssrs-report-that-has-a-sharepoint-list-data-connection-ssrs-r2-and-sharepoint-2010?forum=sqlreportingservices
http://blog.mikehacker.net/2012/05/16/sharepoint-2010-access-services-reporting-with-sql-2012/
cameron rautmann

Error - The file must match the template type. Upload one file per language

hi,
Error - The file must match the template type. Upload one file per language and territory combination.
i am getting above error while registering RTF template in oracle application e -business suite using XML publisher admistrator responsibility.
My work :
i generated xml output using concurrent program.
for this i used standard PO report,
the executable name: POXPRPOP.
i designed the template using MS Office word (for RTF template)
for this :
<?start: body?>
<? for-each: G_Headers?>
VENDOR:
<?POH_VENDOR_NAME?>
<?POH_VENDOR_COUNTRY?>
PURCHASEORDER NO.
<?POH_PO_NUM?>
SHIP TO:
<?C_COMPANY?>
<?POH_SHIP_ADDRESS_LINE1?>
<?POH_SHIP_COUNTRY?>
BILL TO:
<?C_COMPANY?>
<?POH_BILL_ADDRESS_LINE1?>
<?POH_BILL_COUNTRY?>
<?end for-each?>
<?end body?>
saved this file as "Purchasing.rtf" on desk top
i registered data definition
name:purchase order data definition.
code : short name of concurrent program.
i try to create template Or register the template in oracle e-business suite.
name: purchasing template
code: concurrent program short name
type : RTF.
file : browse from desk top (purchasing.rtf)
language:english
territory: US.
but i am getting above error
could any one help to come out of this problem.
thank you
regarding,
sai krishna@cavaya

Hi,
I am getting the error as
The file must match the template type. Upload one file per language and territory combination.
I have checked the template name. It doesn't exist already. Please help me.
Thanks in Advance,
Jeganathan

"an error occurred saving the activex control"

I'm trying to compile an executable in Labview 5.1. When I run the build app, it gets about half way done then pops up the error:
"an error occurred saving the activex control"
After clearing the error message, it proceeds to go through the motions of compling the app, but no exe is generated.
The design mode progam run operates fine, and it saves fine as well in design mode.
Thanks!

wawatts,
Though Brian and I got a broken arrow because we didn't have the necessary ActiveX component installed, I imagine you get no errors on the development system because you do have the component.
This problem would be much harder to pin down on your side given the lack of development-environment errors and the sprawling design of the main VI. One possible troubleshooting approach would be the LabVIEW Find functionality (Edit >> Find). ActiveX functionality typically involves the use of Property Nodes and Invoke Nodes, so if you search for any Invoke Nodes (Select Object, then Functions >> Communication >> ActiveX >> Invoke Node) in the scope of your main VI and its subVIs, you could perhaps have turned up some hits that take you to the subVI that has the control that is presumably causing the problem.
Unfortunately, I fear that finding the problem area doesn't solve the problem. It seems to me that either the LabVIEW app builder or the ActiveX component is doing something unexpected or nonstandard that is leading to the error message.
I'm going to stick to my "upgrade the software as much as possible" guns:
1. Install the LabVIEW 5.1.1 patch I linked to above, if it isn't already installed. There were fixes to the development environment and changes to the app builder that might resolve your problem. This is a free patch.
2. Consider upgrading the ActiveX control. I think that the latest version is called IntuiLink for 54600-series Oscilloscopes, Version 3.1, and it's available here on the Agilent site.
It was easy to do a simple test using your Xezgetsetup.vi on my system (LabVIEW 7.1.1, XP) with the updated ActiveX control. First, I installed the Agilent software. Then, I right-clicked inside the ActiveX control on the front panel of Xezgetsetup.vi, chose Insert ActiveX Object, and selected Agilent 54600 Scope Control from the list. Then I had to go to the block diagram and relink a few of the property and invoke nodes by just left-clicking on broken nodes and re-selecting the items that your code was already displaying. That fixed the VI so that it would run again.
Then I built that VI into an EXE and got no errors.
Perhaps all this proves is that you would have clear sailing if you upgraded to LabVIEW 7.1 and got the most recent Agilent ActiveX control--and maybe this is a good reason to bite the bullet and do that upgrade now--but it's certainly possible that you can do the same thing in 5.1 and solve your problem. Worth a shot.
Hope that helps,
John

Error when saving an Outlook attachment eg. Word Doc after opening it.

we made the group policy change which was giving an error when saving from opened attached files.
But for 1 particular RDS user the error still seems to be occurring. i've tried the following,
1. recreating outlook.
2. recreating user profile.
3. deleted the group policy history from the registry.
4. tried removing outlook add-ins.
your help would be really appreciated.
kind regards

Hi,
What is the error? Does outlook crash? Would you please also detail the group policy change?
We can try cleaning out the Temporary Outlook Files folder to check the result.
We can refer to the following link for the detailed steps to locate and find the temp folder:
http://www.howto-outlook.com/faq/securetemp.htm
Then we need to use OutlookTempCleaner to clean the folder:
http://www.howto-outlook.com/products/outlooktempcleaner.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Melon Chen
TechNet Community Support

Error in saving site as a template

Similar Messages

Maybe you are looking for