Error in script - 'Results' is not a member of 'Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptObjectModel'
I'm trying to set up a script task in SSIS (my first attempt at doing so, so bear with me). Part of this is code I have pulled from other examples I found on the internet.
Dts.TaskResult = Dts.Results.Success
on the above line, I'm getting error
'Results' is not a member of 'Microsoft.SqlServer.Dts.Tasks.ScriptTask.ScriptObjectModel'
Can you tell me what's wrong?
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
<System.AddIn.AddIn("ScriptMain", Version:="1.0", Publisher:="", Description:="")> _
<System.CLSCompliantAttribute(False)> _
Partial Public Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End Enum
Public Sub Main()
Dim mgr As ConnectionManager
mgr = Dts.Connections("FTP_Connect")
Dim conn As FtpClientConnection
conn = New FtpClientConnection(mgr.AcquireConnection(DBNull.Value))
Dim fileNames(0) As String
fileNames(0) = "LEVEL01.TESTFILE" 'user can avoid using / in file name here
Try
conn.Connect()
conn.ReceiveFiles(fileNames, "c:\holddata", True, True)
Catch ex As Exception
Finally
conn.Close()
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
I think error is here - Dts.TaskResult = Dts.Results.Success, it can't find the enumerator
name "Results". The enumerator name that you gave (or by default) "ScriptResults"
Enum
ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End Enum
So, try with this statement
Dts.TaskResult = Dts.ScriptResults.Success
//this is last 3rd line from bottom
Narsimha
Similar Messages
-
Lots of itune errors... resulting in not being able to re-install itunes!
It started this morning, when the pin wheel would never go away when itunes was open. I ended up searching through the dicussions and finally removed my preference lists. Then I could open itunes, but all my songlists were gone, so I reimported the original files back into itunes. It then started to do the gapless scan which finally froze it two seconds into it. I then concluded to just get ride of the program and reinstall it. I deleted the program, and cleaned up all residue of the program. Then when I went to reinstall it is would get past "Wrting file 7%" and then it tells me there was an error in installing and to try again. Any idea's besides tossing the whole computer? I have no other idea's.
Download a fresh .dmg of iTunes and see if that helps.
MJ -
System.Web.Services.Protocols.SoapHeaderException error in script task
HI,
My requirement is I have to create a XML of each row from a table and push one XML data of each row to a web services. This is a syncronous call to web services where it will send the response of each row XML.
The WSDL file is having a method called MATCHXML having 4 parameters namely ControlXML, BatchXML, Username, Password. I have created the ControlXML & BatchXML through code and storing into a string variable seperatly. The WSDL alos contains 4 input called
RequestUUID, ChannelID, ServiceRequestID & ServiceRequestVersion which has to be send to web services compulsory along with the method. In order to implement this, first I have added Web reference of the Web service URL into library, then invoked the method
to hit the web services. The code looks likes as below:
//Initiated an object of the class from the WSDL file
Matching match = new Matching
string result = match.MatchXML(controlXML,BatchXML,Username,Password)
Then, at the above line it display the below error:
SSIS package "HunterAutomation.dtsx" starting. Error: 0x1 at Generates XML file & Update variable: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Web.Services.Protocols.SoapHeaderException:
Mandatory field is not set in EAI_SOAPINPUT; Element -> Environment.eaiCommon.BTID, Environment.eaiCommon.Header.ChannelID, Environment.eaiCommon.Header.RequestUUID, Environment.eaiCommon.Header.ServiceRequestId, Environment.eaiCommon.Header.ServiceRequestVersion
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at ST_ae3b1e5eadb64fdba5040f4efa743458.csproj.Hunter.Matching.Match(String controlXml, String batchXml, String username, String password) in C:\Users\CPUTRACKINGAPP\AppData\Local\Temp\3\SSIS\377534961d7f4fdb91565f9366317fdc\Web References\Hunter\Reference.cs:line
93 at ST_ae3b1e5eadb64fdba5040f4efa743458.csproj.ScriptMain.Main() in C:\Users\CPUTRACKINGAPP\AppData\Local\Temp\3\SSIS\377534961d7f4fdb91565f9366317fdc\ScriptMain.cs:line 1307 --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(Object
target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle
typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr,
Binder binder, Object[] parameters, CultureInfo culture) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture) at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript() Task failed: Generates XML file & Update
variable Warning: 0x80019002 at For Loop Container: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of
errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. Warning: 0x80019002 at HunterAutomation: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised
(1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "HunterAutomation.dtsx" finished: Failure.
In order to solve the issue i have manual created the soap header code. Now Im not understanding how to send the soap header XML message along with the MATCHXML method. I am trying very hard to solve the issue from last 3 weeks but NO LUCK.
Could anyone please help me out on this and I'm already running out of my deadlines.Ok, from the looks of it you're calling the web service from within an SSIS package. Are you able to call the web service in a stand-alone C# console app and is the error just occurring in the SSIS package or not? If it occurs in both situations, continue
development in in the C# console app as this will make debugging easier. Also, in order to help you further, are you calling a web service under your control or not, and is the web service a WCF service or not?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
Payroll results could not be imported/Error in Finance Posting of Payroll
Hi friends,
Please help me.
I have created three wage types
2001-Basic Pay
2002-HRA
2003-Conveyance
When I generated remuneration statement all these three wage types where displayed along with EE EPF contribution and VPF contribution which I have assigned earlier in infotype.
After that for posting to FI, I created three symbolic accounts
(Basic, HRA and Conveyance together as 0001 symbolic account I(accounted posting to expense report)
Employees contribution to PF ( i.e.EE EPF contribution and EE VPF contribution) to (PFEE) symbolic account II (accounted posting to balance sheet)
Employers contribution to PF ( i.e Employer PF contribution and Employer pension contribution) to (PFER) symbolic account III (accounted posting to expense report)
After this I have grouped employees as 3 for salaried employees, after this I have assigned the same to number 3 to PPMOD under three (I am not sure this is correct, please advise)
Then with the help of an FI consultant, I assigned PFEE to balance sheet and 0001 and PFER to expense account.
Now when I activated 'Execute Run' for finance posting of payroll of a personal number an error is shown 'Errors Occured! Check Error Log' payroll results could not be imported.
I doubt I missed some steps. Please helpDear Naveen and Stephen
This is the message which I got
<b><b>Payroll results could not be imported
Message no. 3G112
Diagnosis
The payroll results for this employee could not be imported from the database.
Procedure
Check the consistency of the payroll results for this employee.</b></b>
Please help
Regards
Santhosh.S -
Hi
Pl. verify following code: I did not get any error but the result is not derived ,
*WHEN ACCOUNT
*IS "BS115"
*WHEN CATEGORY
*IS "Actual"
*WHEN TIME
*IS "2011.04"
*REC(FACTOR = 1, ACCOUNT = "BS114",CATEGORY = "Actual",TIME = "2011.05")
*ENDWHEN
*ENDWHEN
*ENDWHEN
*COMMIT
I want to copy from BS115 april to BS114 MAY ACTUAL
pl. verify any mistake in the above code
rgds
srinathHi
My issue is resolved.
Actuall the problem is once saved data is not displaying (after running default script logic)
But some time times result is displaying immd. after save without refresh.
I refreshed & i got my result.
Thanks
Srinath -
Payroll results could not be imported
Hi,
We are facing a problem while posting payroll results to FI/CO...
Error is " Payroll results could not be imported "..
Kindly help
its real urgent
hr_userHai..
Check the sub schema
XPR0 & XLR0...
Import previous result current period
Import last payroll result
Edited by: Ram Manohar on Mar 24, 2008 5:07 PM -
Microsoft.SqlServer.ManagedDTS not recognized in SSIS 2008
I recently got a new computer at work and when I open a script task in an SSIS project I get the following error:
Error 4 Reference required to assembly 'Microsoft.SqlServer.ManagedDTS, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' containing the type 'Microsoft.SqlServer.Dts.Runtime.Variables'. Add one to your project.
I never got this error before with my previous machine. i surely don't need to add a reference in every script task do I?
Thanks,
RichRich,
You open a project in VS 2010 perhaps and SSIS 2008 is not installed.
By the way here I found a blog post about the error that covers it very well offering fixes:
http://blogs.msdn.com/b/jason_howell/archive/2010/08/18/visual-studio-2010-solution-build-process-give-a-warning-about-indirect-dependency-on-the-net-framework-assembly-due-to-ssis-references.aspx
Arthur My Blog -
Hello OTN,
After converting/exporting machines from VMware and importing them into OVM i am receiving errors on some of the machines when powering on.
Here is the complete error message:
Start - /OVS/running_pool/dirkwin
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/machinename/vm.cfg'] => Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block failed; error detected.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
run_cmd(args=cmd)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 131, in start_vm
raise e
Searching for this error turned up different solutions but none of them worked.
One mentioned OVM not being able to handle spaces in vm names but this is not a working solution as most of the machines are just regular names without spaces or special characters.
Also interesting, sometimes this error does not turn up when powering on BUT the machine just powers off again and returns to its turned off state. Next power on the error returns.
OS types vary from S10, Win XP and RedHat so a possible connection to the error being the host OS is not there.
Harddrive types are set to auto. The vm.cfg's of functioning machines do not differ from non functioning machines besides the actual vm name in the vm.cfg
Any idea to this error or how to solve it ?
Thanks
-StephanHello Sebastian,
This is one of the vm.cfg which will abort due to the above mentioned error:
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/vmname/vmname.img,hda,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '2048'
name = 'vmname'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '0'
usbdevice = 'tablet'
uuid = 'a2a62bcb-f9ab-4ec3-8574-7415985cdf0a'
vcpus = 1
vif = ['bridge=xenbr0,mac=xx:xx:xx:xx:xx:xx,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xx'
vncunused = 1
The xend.log also turned up nothing concerning this error. no messages were written into it. No other log has been created by xen in the /var/log/xen directory concerning an issue with the current machine.
Thanks for your help !
-Stephan
ps:mac address + pw is commented out
Edited by: Stephan Becker on Aug 5, 2010 7:11 AM -
Error on WWI server EHS_GLM_GENSERV: Results file not found on production
Hi Experts,
I need some help/advice. We have issues with our new EH&S WWI server.
This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
Only difference between existing WWI QA and production server is that
Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI
And Same path maintain on new server C:\Program Files (x86)\EHS\WWI
But existing production WWI server installation path is different C:\Program Files\EHS\WWI
So is there any customizing changes required from SAP side to avoid this error on production
Can you please advise on this.
================================================================================
Error on WWI server EHS_GLM_GENSERV: Results file not found
Message no. C$830
Diagnosis
The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
System Response
Generation was not carried out.
Procedure
Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
Check the Windows event log on the WWI generation server. The event log may contain other error messages.
SAP Note 1058521 provides possible solutions for this error.
==================================================================================
Log shows
============================================================================================================================================
E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
================================================================================================================================================Hello Gajanan,
the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
For ECC 6.0 Ehp 0-2 and lower
Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
For ECC 6.0 Ehp 3-6
Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
For ECC 6.0 Ehp 7
Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data -
I'm trying to load sharepoint script from *.cmd file.
I have Sharepoint 2010 installed on Windows 7 x64 and SQL server 2008r2.
My cmd file is:
Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
My sharepoint file 1.ps1 is:
$snapin="Microsoft.SharePoint.PowerShell"
if ($action -eq $null -or $action -eq '')
{<br />
# Action by default is complete uninstallation.
$action='uninstall'
$uninstall = $true
else
$action = $action.ToLower()
switch($action)
{ $_ -eq "uninstall" } { $uninstall = $true; break }
{ $_ -eq "removesolution" } { $removeSolution = $true; break }
{ $_ -eq "deactivatecorpus" } { $deactivateCorpus = $true; break }
{ $_ -eq "deactivatesupport" } { $deactivateSupport = $true; break }
default { Write-Host -f Red "Error: Invalid action: $action "; Exit -1 }
Check the Sharepoint snapin availability.
if (Get-PSSnapin $snapin -ea "silentlycontinue")
Write-Host "PS snapin $snapin is loaded."
elseif (Get-PSSnapin $snapin -registered -ea "silentlycontinue")
Write-Host "PS snapin $snapin is registered."
Add-PSSnapin $snapin
Write-Host "PS snapin $snapin is loaded."
else
Write-Host -f Red "Error: PS snapin $snapin is not found."
Exit -1
$url = "http://pc1/sites/GroupWork/"
$site= new-Object Microsoft.SharePoint.SPSite($url )
$loc= [System.Int32]::Parse(1033)
$templates= $site.GetWebTemplates($loc)
foreach ($child in $templates){ write-host $child.Name " " $child.Title}<br />
$site.Dispose()
The script works fine from the Sharepoint 2010 management shell after launching the shell from the start menu (or from windows cmd by entering powershell -v 2):
PS C:\2> .\1.ps1
PS snapin Microsoft.SharePoint.PowerShell is loaded.
GLOBAL#0 Global template
STS#0 Team Site
STS#1 Blank Site
STS#2 Document Workspace
MPS#0 Basic Meeting Workspace
MPS#1 Blank Meeting Workspace
MPS#2 Decision Meeting Workspace
MPS#3 Social Meeting Workspace
MPS#4 Multipage Meeting Workspace
CENTRALADMIN#0 Central Admin Site
WIKI#0 Wiki Site
BLOG#0 Blog
SGS#0 Group Work Site
TENANTADMIN#0 Tenant Admin Site
{248A640A-AE86-42B7-90EC-45EC8618D6B4}#MySite2 MySite2
{95629DC2-03B1-4C92-AD70-BC1FEAA49E7D}#MySite1 MySite1
{7F01CFE4-F5E2-408B-AC87-E186D21F624C}#NewSiteTemplate NewSiteTemplate
PS C:\2>
I have an access to the database Sharepoint_Config from current domain user and from other 2 users. All users have db_owner rights to the Sharepoint_Config database. But
i've loaded in windows from the user which is dbo in the database (dbo with windows authentication with domain\username for the current user). The dbo user has do_owner rights in the Sharepoint_Config database. I've tried to login under other users and launch
the cmd file but without success.
My PowerShell has version 2.0:
PS C:\2> $psversiontable
Name Value
CLRVersion 2.0.50727.5477
BuildVersion 6.1.7601.17514
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
After launching the script from 1.cmd file i get an errors:
C:\2>Powershell -v 2 -NonInteractive -NoLogo -File 1.ps1
PS snapin Microsoft.SharePoint.PowerShell is registered.
The local farm is not accessible. Cmdlets with FeatureDependencyId are not regis
tered.
Could not read the XML Configuration file in the folder CONFIG\PowerShell\Regist
ration.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\Registration'.
No xml configuration files loaded.
Unable to register core product cmdlets.
Could not read the Types files in the folder CONFIG\PowerShell\types.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\types'.
"No Types files Found."
Could not read the Format file in the folder CONFIG\PowerShell\format.
Could not find a part of the path 'C:\2\CONFIG\PowerShell\format'.
No Format files Found.
PS snapin Microsoft.SharePoint.PowerShell is loaded.
New-Object : Exception calling ".ctor" with "1" argument(s): "The Web applicati
on at http://Pc1/sites/GroupWork/ could not be found. Verify t
hat you have typed the URL correctly. If the URL should be serving existing con
tent, the system administrator may need to add a new request URL mapping to the
intended application."
At C:\2\1.ps1:48 char:18
+ $site= new-Object <<<< Microsoft.SharePoint.SPSite($url )
+ CategoryInfo : InvalidOperation: (:) [New-Object], MethodInvoca
tionException
+ FullyQualifiedErrorId : ConstructorInvokedThrowException,Microsoft.Power
Shell.Commands.NewObjectCommand
Please help me. I don't understand why the script is launched from the sharepoint management shell but doesn't work from the cmd file.I have an answer for my problem: for solving a problem I've made several steps:
1. Run farm installation under AD admin credentials - runas /user:Domain1\DomainAdmin1 "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN\psconfigui.exe".
This user has been added as farm administrator in the wizard.
This user has been added as DBO in the SQL Server. (This is the main difference with my previous attempts)
2. Execute a command Add-SPShellAdmin Domain1\UserAccount1 in
the Management Shell of Sharepoint.
3. Run SQL server and add Sharepoint_Shell_Access to the Domain1\UserAccount1
(my main account) in the Config database
4. Run CMD file only from Start->Run menu.
runas /user:Domain1\UserAccount1 "C:\1.cmd".
Do not use Total Commander command prompt or file list for executing *.cmd of *.bat files without root administrator account.
Thanks all for help. -
Visual Studio 2012 cannot resolve symbol or Errors control is not a member of class
Visual Studio 2012 Web Site Project (Note not a Web application, so there are not Designer.vb files) > Site works perfectly fine and using IIS and attaching to IIS to debug code.
However, if I try to build the site inside of Visual Studio I am getting lots of Errors ‘pnlName’ is not a member of ‘Page_Name’ In the code behind I am getting errors ‘Cannot resolve symbol ‘pnlName’
.ascx Page
<li style="margin-right:0;" id="pnlName" runat="server"><a href="/cart" title="Checkout" class="global-checkout">Checkout</a></li>
.ascx.vb page
Me.pnlName.Attributes.Remove("style")
I have cleaned, rebuild and nothing gets rid of these errors, but again the site works as designed, but I would like to launch and debug inside of Visual Studio.
Moojjoo MCP, MCTS
MCP Virtual Business Card
http://moojjoo.blogspot.comCor,
What I am stating is this is a solution using the Web Site Project instead of a
Web Application Project.
Web Site projects do not require Designer.vb files, Web Application Projects add Designer.vb files in the solution.
Background: I have been hired to support a very successful e-commerce site that was built by a 3rd party vendor (I had no input on the contract or specification, because I would have went with
MVC). The site works 100% correctly, however from my 2003 - 2015 experience with Visual Studio and Web Development being in Web Forms and MVC I have always built ASP.NET Solutions using the Web Application Project Templates, which compiles the code down
to .dlls.
A Web Site project does not compile the code, but simply uses the .vb files and they have to be migrated to the server with the .aspx files. http://msdn.microsoft.com/en-us/library/dd547590%28v=vs.110%29.aspx
Currently the only way I can debug this Solution is to attach to the w3wp.exe process running locally on my work station.
The Solution is comprised of two Web Sites, which I cannot get it to compile because of the following errors -
'webServerControlName' is not a member of '(Protected Code Behind Class Name)' I am reaching out to the MSDN community to see if anyone has experienced this issue with
Web Site Projects.
I hope that clears up the Project Type question.
Moojjoo MCP, MCTS
MCP Virtual Business Card
http://moojjoo.blogspot.com -
I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta -
Trying to export my forms results to excel error message is adobe can not save as the file is open
trying to export my forms results to excel, error message is adobe cn not save as the file is open in another location, however, no other file is open.
Thanks for continuing the help, but it is a medical realted form and I will just keep it confidential at this time.
Larry Lakes, Executive Director
The HANDLE Institute
[email protected]
541-639-1588
P. O. Box 6264
Bend, OR 97708 -
Play Framework - Compilation error[object inject is not a member of package javax]
I would like to add to the table "Person" when you press the button "Add a Person" but I get an error:
play.PlayExceptions$CompilationException: Compilation error[object inject is not a member of package javax]
at play.PlayExceptions$CompilationException$.apply(PlayExceptions.scala:27) ~[na:na]
at play.PlayExceptions$CompilationException$.apply(PlayExceptions.scala:27) ~[na:na]
at scala.Option.map(Option.scala:145) ~[scala-library-2.11.1.jar:na]
controller is in the class Application:
package controllers
import play.api._
import play.api.mvc._
import play.api.data.Form
import play.api.data.Forms._
import play.api.libs.json.Json
import models._
import javax.inject._
class Application @Inject() (db: DB) extends Controller {
def index = Action {
Ok(views.html.index())
val personForm: Form[Person] = Form {
mapping(
"name" -> text
)(Person.apply)(Person.unapply)
def addPerson = Action { implicit request =>
val person = personForm.bindFromRequest.get
db.save(person)
Redirect(routes.Application.index)
I do not know how to add a library javax.inject-1.jar ?
Is there another solution . Thank for you help in this matter.If this is still an outstanding issue, and you have a valid CSI, a BDB support license, please access MOS (MyOracle Support) and review Note 1198943.1: "Building BDB XML 2.5.16 with STLPort on Solaris using Sun Studio". If you cannot access MOS, drop me an e-mail at andrei dot costache at the obvious domain, and I will send the details.
Regards,
Andrei -
Scripting.aex could not be loaded error
I recently had a hard drive failure but managed to save everything onto a new drive. All Creative Cloud program work except After Effects which gives me this error upon startup: "After Effects Error: plug-in "scripting.aex" could not be loaded (126)." Do I need to uninstall and re-install AE cc?
Based on the extremely limited amount of information in your post (you haven't even told us what operating system your computer has), I would say yes. That seems like a reasonable step.
Maybe you are looking for
-
A function with a list of data
I need to get a list of names from a function so that i can avoid creating seperate functions for each names... could anyone give a syntax for it? I dont want to have a procedure but a function will be good thanks
-
I pod touch 4th generation?
my ipod screen has gone black it wont turn on it was fully charged as well ive pluggedit into my computer and it still wont work this happened before but it worked when i plugged it in my computer, should i leavee it over night?
-
Renaming .jpg to .tbn - how?
I'm using my Mac mini as a media centre running xbmc and I'm having some issues getting the software to pick up my custom artwork. In the XBMC Wiki it says to rename the file extension from a (.jpg) to a (.tbn) http://www.xbmc.org/wiki/index.php?titl
-
Workflow For material Creation
Requriment is that : After creation of Material by End User Workflow Should be Triggered and Internal Mail Should be goes into the Superwiser Inbox (i.e in SWBP ) only Superwiser can see whos has created the Material ......... So if A
-
Adding Organizational Chart in Pages '09
Does anybody know how to add an organizational chart in Pages '09? How could I make the connection line not to be curve after adding shapes? Please discuss answers here. Thanks