Error in SSIS Package in SQL Server 2008 R2
Dear All,
I am getting below error in SSIS Package.
[OLE DB Destination [31]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >,
>= or when the subquery is used as an expression.".
The SSIS package reads .xml file from a folder and then mapped to insert values in SQL table from there one trigger writtern on table to update other tables.
Pld guide me cause of the issue
-- Kind Regards Sandeep
Dear All,
I am getting below error in SSIS Package.
[OLE DB Destination [31]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when
the subquery is used as an expression.".
The SSIS package reads .xml file from a folder and then mapped to insert values in SQL table from there one trigger writtern on table to update other tables.
Pld guide me cause of the issue
-- Kind Regards Sandeep
Query should return only one value. Instead it is returning more than one value. Check the query result in ssms.
Thanks.
- please mark correct answers
Similar Messages
-
Run sql 2008 ssis package into sql server 2012 machine
Hello,
I have created a ssis package in sql server 2008 and use a job to execute it pointing to databaseA. works fine.
Then, I place that package into a sql server 2012 machine and use a job to execute it in the same database, databaseA.
The error I get is something like:
can not use the old version in the new version machine.
Is this really the case or am I doing something wrong please?Hi Arkiboys,
Arthur is right that the error occurs because the SSIS 2008 package cannot be upgraded to SSIS 2012 package. When the SSIS 2008 package is called by SSIS 2012 dtexec utility tool, the package will be upgraded temporarily and the changes won’t be saved. Since
your current SSIS 2008 package cannot be upgraded automatically, you can create the package from scratch in SSDT installed by SQL Server 2010. Another option isto open the SSIS 2008 package in SSDT or add the package to a SSIS 2012 project, then the upgrade
will be performed automatically. Then, you can check the error message during the upgrade, which may help you to find the tasks/components that cause the upgrade failure. In this way, you can remove the tasks/components in question from the SSIS 2008 package
and then upgrade the package, and then add the tasks/components in question in SSDT 2010.
Regards,
Mike Yin
If you have any feedback on our support, please click
here.
Mike Yin
TechNet Community Support -
Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered -
Getting an error running an SSIS package from SQL server agent
This is the first time I'm running an SSIS package in SQL server agent.
I'm running a SQL server agent job and getting this error message:
Am I using the correct options? (options list below)
Message
Executed as user: SITEX\stxdatasqlexec. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 1:42:00 PM Error: 2014-04-17
13:42:01.01 Code: 0xC0011007 Source: {B72BF421-785A-44EC-9570-D2A40B046CA7} Description: Unable to load the package as XML because of package does not have a valid XML format. A
specific XML parser error will be posted. End Error Error: 2014-04-17 13:42:01.02 Code: 0xC0011002 Source: {B72BF421-785A-44EC-9570-D2A40B046CA7} Description: Failed
to open package file "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly
into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error Could not load package "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx"
because of error 0xC0011002. Description: Failed to open package file "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a
package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Source:
{B72BF421-785A-44EC-9570-D2A40B046CA7} Started: 1:42:00 PM Finished: 1:42:01 PM Elapsed: 0.047 seconds. The package could not be found. The step failed.
Here are the options I'm using:
package source - file system
data source destination = my SQL server db
execution option - use 32 bit runtime
command line entry:
- /FILE "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" /CONNECTION DestinationConnectionOLEDB;"\"Data Source=esxdspr-sql01.sitex.com;Initial Catalog=SuesTbls;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=false;\""
/CONNECTION SourceConnectionFlatFile;"\\sitex.com\dfs\Production\SFTPData\LPSEFTProcess\FromAADFS\Rpt_Nbr_Rollsperbatch_20140331_20_0.txt"
/X86 /CHECKPOINTING OFF /REPORTING E
I checked the filename so it must be the XML format it's complaining about.Thank you, pituach.
I tried running the package using just my c drive without partition, C:\Nbr_Rolls.dtsx, but still getting the same
error. I do not see any option on this site to post my package. I know it's not the path that's the issue. Our support desk already fixed that because I was getting a different message before.
Message
Executed as user: SITEX\stxdatasqlexec. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 11:23:00 AM Error: 2014-04-18
11:23:00.44 Code: 0xC0011007 Source: {2BEE62EB-DD08-4867-9F5C-660167964650} Description: Unable to load the package as XML because of package does not have a valid XML format. A
specific XML parser error will be posted. End Error Error: 2014-04-18 11:23:00.45 Code: 0xC0011002 Source: {2BEE62EB-DD08-4867-9F5C-660167964650} Description: Failed
to open package file "C:\Nbr_Rolls.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error Could not load package "C:\Nbr_Rolls.dtsx" because of error 0xC0011002. Description: Failed
to open package file "C:\Nbr_Rolls.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Source: {2BEE62EB-DD08-4867-9F5C-660167964650} Started: 11:23:00 AM Finished: 11:23:00 AM
Elapsed: 0.125 seconds. The package could not be found. The step failed. -
An error occurred attempting to install SQL Server 2008 Express Service Pack 1
i have Setup application with complete prerequisite requirement package create from Visual Studio 2010 setup application.And yes this setup working fine in windows 7 and windows vista but not working in windows xp service pack 3.and getting error when install "An error occurred attempting to install SQL Server 2008 Express Service Pack 1"Give me solution as soon as possible.I have listed summery.txt and log.txt. please refer it.Summery.txt
===============================================================Component SQL Server 2008 Express has failed to install with the
following error message:
"An error occurred attempting to install SQL Server
2008 Express Service Pack 1."
The following components were successfully
installed:
- Microsoft .NET Framework 4 Client Profile (x86 and
x64)
The following components failed to install:
- SQL Server 2008
Express
See the setup log file located at
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\install.log' for more
information.Install.log
==========================================================================The following properties have been set:
Property: [AdminUser]
= true {boolean}
Property: [InstallMode] = HomeSite {string}
Property:
[ProcessorArchitecture] = Intel {string}
Property: [VersionNT] = 5.1.3
{version}
Running checks for package 'Windows Installer 3.1', phase
BuildList
The following properties have been set for package 'Windows
Installer 3.1':
Running checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running
operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1':
true
Result of checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is
'Bypass'
'Windows Installer 3.1' RunCheck result: No Install
Needed
Running checks for package 'Microsoft .NET Framework 4 Client Profile
(x86 and x64)', phase BuildList
Reading value 'Version' of registry key
'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client'
Unable to read
registry value
Not setting value for property
'DotNet40Client_TargetVersion'
The following properties have been set for
package 'Microsoft .NET Framework 4 Client Profile (x86 and x64)':
Running
checks for command 'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe'
Result of
running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite':
true
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe' is 'Bypass'
Running checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running
operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Running checks for package 'SQL Server 2008 Express', phase
BuildList
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotExists' on property 'VersionNT': false
Result of running operator
'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of
running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0':
false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and
value '5.2.1': false
Result of running operator 'ValueEqualTo' on property
'AdminUser' and value 'false': false
Result of running operator
'ValueEqualTo' on property 'SQLExpressChk' and value '-1': false
Result of
running operator 'ValueEqualTo' on property 'SQLExpressChk' and value '-2':
false
Result of running operator 'ValueEqualTo' on property 'SQLExpressChk'
and value '-3': false
Result of running operator 'ValueEqualTo' on property
'SQLExpressChk' and value '-4': false
Result of running operator
'ValueLessThan' on property 'SQLExpressChk' and value '-4': false
Result of
running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value
'Intel': false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '1': true
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
Running checks for
command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
'SQL Server 2008 Express' RunCheck result: Install Needed
EULA
for components 'Microsoft .NET Framework 4 Client Profile (x86 and x64)' was
accepted.
EULA for components 'SQL Server 2008 Express' was
accepted.
Copying files to temporary directory
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
Downloading files to
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
(11/15/2014 3:59:51 PM)
Downloading 'DotNetFX40Client\dotNetFx40_Client_setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=182804'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 3:59:53 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
(11/15/2014 3:59:53 PM) Downloading
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' from 'http://go.microsoft.com/fwlink/?LinkID=153228&clcid=0x409'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 4:00:22 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Running checks for package 'Microsoft .NET
Framework 4 Client Profile (x86 and x64)', phase BeforePackage
Reading value
'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Unable to read registry value
Not setting value for
property 'DotNet40Client_TargetVersion'
The following properties have been
set for package 'Microsoft .NET Framework 4 Client Profile (x86 and
x64)':
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe'
and parameters ' /q /norestart /ChainingPackage ClientX64ClickOnce /lcid
1033'
Process exited with code 0
Running checks for package 'Microsoft
.NET Framework 4 Client Profile (x86 and x64)', phase AfterPackage
Reading
value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Read string value '4.0.30319'
Setting value
'4.0.30319 {string}' for property 'DotNet40Client_TargetVersion'
The
following properties have been set for package 'Microsoft .NET Framework 4
Client Profile (x86 and x64)':
Property: [DotNet40Client_TargetVersion] =
4.0.30319 {string}
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'DotNet40Client_TargetVersion' and value '4.0.30129': true
Result of checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe' is
'Bypass'
'Microsoft .NET Framework 4 Client Profile (x86 and x64)' RunCheck
result: Install Succeeded
Running checks for package 'SQL Server 2008
Express', phase BeforePackage
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
'SQL Server 2008 Express'
RunCheck result: Install Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
and parameters '/q /hideconsole /action=Upgrade /instancename=SQLEXPRESS
/skiprules=RebootRequiredCheck'
Process exited with code
-2068578302
Status of package 'Microsoft .NET Framework 4 Client Profile (x86
and x64)' after install is 'InstallSucceeded'
Status of package 'SQL Server
2008 Express' after install is 'InstallFailed'
S S ManneHi Manne,
As your description, you come across an error when trying to install SQL Server 2008 express Service Pack 1 on windows XP Service Pack 3 machine. From your error log, I get the error(unable to read registry value). As my analysis, the issue could be due
to that your account doesn't have access to registry. Below are the recommendations for troubleshooting the issue.
1. Make sure that you log in as an administrator of the machine.
2. Please follow the steps below to make sure that you have granted the right permission to registry.
a. Located HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server in registry.
b. Right click and go to Permission, then you could see user accounts or groups. If your user account is not in the list, you could click Add to add your account there.
c. Select your account and Click on Advance.
d. Check on both check box ('Include inheritable permissions from this object's parent'.
and 'Replace all child object permissions with inheritable permissions from this object'), click OK.
e. Click OK again.
Regards,
Michelle Li -
Unable to upgrade SSIS packages to SQL Server 2014
Hi there,
I'm trying to upgrade our SSIS packages from SQL Server 2012 to 2014 (in Visual Studio 2013). The wizard pops up the minute the project loads and I leave everything to default.
It errors immediately though on almost every package with the following error:
Error 0xc001000e: MyPackage: The connection "{5F69F91E-8CD7-49A7-A76A-815244411037}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
That connection is a project connection manager and most definitely exists. In fact, I can open the individual package and it upgrades it for me and the package is completely fine. It seems to me that the upgrade wizard has a bug whereby it doesn't
look for project connection managers.
Any help would be greatly appreciated, otherwise I might just post it to connect as a bug.I was able to fix it using the following steps:
Open project, "Upgrade Package Wizard" opens automatically
Select all packages, click next, some packages will fail. Ignore them, close wizard.
Open every package. A message says "Package was upgraded" for each package.
Save every package, save solution, close solution
Open the solution again. This time no "Upgrade Wizard" opens, upgrade was successful
Deploy the solution to SSIS server (my project already had package configuration)
This is what worked for me, I hope it'll help others. -
How to Create a SQL Agent Job For A SSIS Package with Sql Server Authentication
Hi ALl,
I have a SSIS package which basically has a data flow task in which i pull the data from one server and copy it into another server and my source server is the one where i dont have windows authentication and i have to only use a sql server authentication
. This package runs fine if i click the server connection properties type the password and save it.
Now, my task is to set up a sql agent job which basically uses a proxy account and takes this package from the file system and runs it.But when i try to run this package, its failing with an error saying
"Login Failed For rpt5user" where rpt5user is the username for my sql server authentication of the source connection.
Can someone please help me with any suggestions on how to do this?
I have heard that we can achieve it by using xml config file which i have never used and i am trying to google around but for no luck.
So, If someone can please throw any suggestions or ideas on this it would be great.
ThanksYou need to add password as a config item and set it from the file source or sql table
see this as an example
http://blogs.msdn.com/b/runeetv/archive/2009/12/22/ssis-package-using-sql-authentication-and-dontsavesensitive-as-protectionlevel.aspx
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
Executing SSIS packages through SQL Server Jobs.
Hi,
I have an SSIS package which generates xml and text files and ftps it to an ftp site. When i run the package from BIDS it works successfully but when i run it from a job it fails. My SSIS package connects to DB server A and though i'm creating a job on DB
server A but my folder structure and the package resides in server B from where i'm connecting to DB server A through Management Studio. I'm using File system in SQL server Agent Job to call the package. When i execute the job i get following error:
Executed as user: I\A. ...er Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 5:08:05 PM Error: 2011-06-21 17:08:05.11
Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2011-06-21 17:08:05.11 Description:
Failed to open package file "E:\P\H\R\Tools\R\R\R.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the
result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has . The step failed.
Could you please tell me where am i going wrong?
Thanks,
Deepti
DeeptiHi Christa Kurschat,
I'm running the job under proxy account. And that account has sysadmin permissions.
I used following script to create proxy account and run my package under that account:
I. Create job executor account
Highlight Security->New Login, say to make login as devlogin, type your password, default database can be your target database.
Server roles: check �sysadmin�
User mapping: your target database
Msdb database: you make sure to include
SQLAgentUserRole, SQLAgentReaderRole, SQLAgentOperatorRole
Then click OK
II. Create SQL proxy account and associate proxy account with job executor account
Here is the code and run it the query window.
Use master
CREATE CREDENTIAL [MyCredential] WITH IDENTITY = 'yourdomain\myWindowAccount', secret = 'WindowLoginPassword'
Use msdb
Sp_add_proxy @proxy_name='MyProxy', @credential_name='MyCredential'
Sp_grant_login_to_proxy @login_name=' devlogin', @proxy_name='MyProxy'
Sp_grant_proxy_to_subsystem @proxy_name='MyProxy', @subsystem_name='SSIS'
III. Create SSIS package
In MS SQL Server Business Intelligence Development Studio, you use job executor account devlogin to create the SSIS package (DTS) and make sure you can execute this package
in SQL Server Business Intelligence Development Studio. Compile/build this package.
IV. Create the job, schedule the job and run the job
In SQL Server Management Studio, highlight SQL Server Agent -> Start. Highlight Job ->New Job�, name it , myJob.
Under Steps, New Step, name it, Step1,
Type: SQL Server Integration Service Package
Run as: myProxy
Package source: File System
Browse to select your package file xxx.dtsx
Click Ok
Schedule your job and enable it
I followed these steps.
Thanks,
Deepti
Deepti -
Another Error in Initializing Database in SQL Server 2008 R2
Hi All,
I'm facing very strange problem with my current LiveCecle ES 2.5 deployed in the Windows Server 2008 in which i must use Websphere 6.1 as the Application server and then then Databse must be using SQL Server 2008 R2.
see the following error message:
If anyone here has ever done the installation on Websphere and SQL Server 2008R2 please share it here.
Thanks.Sean
Congrats on the new job in MSFT or am I missing something? :-)
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Trying to install Support for DTS packages in SQL server 2008
Hi all
I am trying to follow the instructions in the following link...
technet.microsoft.com/en-us/library/ms143755(v=sql.105).aspx
...to install support for DTS packages - when it says on the Feature Selection page, select Integration Services - none of the installs I have tried show this as an option - what should I be installing in order to see this and get this feature installed?
I just need to be able to view some DTS packages - help!
Thank you! JamesHello James,
as can be read in the article:
Microsoft SQL Server 2008 Service Pack 2 Feature Pack => SQLServer2005_BC.msi (BC
= backward compatibilty).
Olaf Helper
[ Blog] [ Xing] [ MVP] -
DBConnect Error - Trying to Connect to SQL Server 2008
Hi,
I am trying to connect to one of the SQL Server on the domain.
SQL Server 2008
OS: Windows 2008 R2 64 bit
I have done all the entries as mentioned in the Note. 178949 correctly but when I am testing this connection through program ADBC_TEST_CONNECTION it is showing me following error:
Testing a Database Connection Defined in DBCON
Could not open connection SQLCONNECTION
sql error 1- occured:
I have put DBMSSSLIB.DLL and DBMSSSLIB.PDB in the run directory as mentioned in the note too.
I have searched forum but couldn't find any solution for this. Please advice.
Thanks,
Usman MalikHi dude!
Checking the dbsl_w<NN> as it is explained in point 3 of the 'Troubleshooting' section of [SAP note 738371|https://service.sap.com/sap/support/notes/738371] would help a lot to know the reason of the failure.
I hope this helps you!
Cheers! -
Minimum requirements for deploying a package on Sql Server 2008
I am trying to setup a restricted login to deploy packages. At the very least I need to avoid using the sysadmin server role however all of my testing seems to point to my restricted login requiring it which sort of defeats the purpose of a restricted
login. Without the sysadmin account I get the following error: Create failed for JobStepRole
Read action
Write action
own package roles.
db_ssisoperator
Enumerate all packages.
View all packages.
Execute all packages.
Export all packages.
Execute all packages in SQL Server Agent.
None
Windows administrators
View execution details of all running packages.
Stop all currently running packages.
Sysssispackages Table
The sysssispackages table in msdb contains the packages that are saved to SQL Server. For more information, see sysssispackages
(Transact-SQL).
The sysssispackages table includes columns that contain information about the roles that are assigned to packages.
The readerrole column specifies the role that has read access to the package.
The writerrole column specifies the role that has write access to the package.
The ownersid column contains the unique security identifier of the user who created the package. This column defines the owner of the package.
Permissions
By default, the permissions of the db_ssisadmin and db_ssisoperator fixed database-level roles and the unique security identifier of the user who created the package apply to the reader role for packages,
and the permissions of the db_ssisadmin role and the unique security identifier of the user who created the package apply to the writer role. A user must be a member of the db_ssisadmin, db_ssisltduser,
or db_ssisoperator role to have read access to the package. A user must be a member of the db_ssisadmin role to have write access.
Please click "Mark as Answer" if the post solves your problem - Thanks -
Error access CF8 to Microsoft SQL Server 2008
Hello!
I have created a database in SQL Server 2008.
Further, in CF Administrator Add New Data Source - also there is an error.
Connection verification failed for data source: dbo.Articles
java.sql.SQLException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: localhost:1433. Reason: Connection refused: connect
The root cause was that: java.sql.SQLException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: localhost:1433. Reason: Connection refused: connect
Prompt how to solve this problem?What is the solution?
I have the same thing with SQL Server 2008 64 bit. When i switch my datasource from SQL 2008 to SQL 2000 it works great otherwise it will not work. I have checked SQL Server 2008 that all the ports show 1433. I have been stuck on this for a while. I also checked the SQL Server Network Configuration / TCP/IP and i have nothing in the dynamic field and all the ports show 1433. If someone has allready figured this out it would be good to have a solution- Especially since coldfusion is supposed to connect to the database....
Thanks for any help. -
Error creating GTC to Microsoft SQL Server 2008
I have a table in a Microsoft SQL Server 2008 data base.
When I set the configuration of the connector I get and error.
com.thortech.xl.gc.exception.DBException: The schema sipec does not exist in the target database.
In the database performed the following query " select * from sipec.dbo.TABLE" and throws me results. But if I performed the following query “select * from sipec.TABLE” this brings me no results.
So if in the field “Parent Table/View Name” I put this “sipec.dbo.TABLE” in the log file I see this error
com.thortech.xl.gc.exception.DBException: The table name must be specified in the form of [Schema].[Table] or [Table]
I put the driver where the guide indicateWhat is the solution?
I have the same thing with SQL Server 2008 64 bit. When i switch my datasource from SQL 2008 to SQL 2000 it works great otherwise it will not work. I have checked SQL Server 2008 that all the ports show 1433. I have been stuck on this for a while. I also checked the SQL Server Network Configuration / TCP/IP and i have nothing in the dynamic field and all the ports show 1433. If someone has allready figured this out it would be good to have a solution- Especially since coldfusion is supposed to connect to the database....
Thanks for any help. -
SSIS Package execution - SQL Server 2012
Hi all
I am attempting to run a deployed package manually (not via a job) through the SSMS 2012 GUI and the error dictates that my Execute Process Task cannot access on of my network drives (\\Share\Directory).
If I run the package through SSDT, it runs fine.
How can I get my package to see the required directory please? It needs read/write permissions.
Thanks.Hi warnerrj79,
If I understand correctly, you directly execute a package through SSDT, it works fine. When you right-click on a package under Integration Services Catalog \ SSISDB \ <Folder name> \ Projects \ <Project name> \ Packages \ <Package name>
and select Execute... to run a package in SQL Server Management Studio, it fails with the error ”Execute Process Task cannot access on the network drives (\\Share\Directory).”
When we execute a package under Integration Services Catalog, the package will run under the credentials used to connect to SQL Server Management Studio. Please note that we need run the package using Windows Authentication.
As to your issue, please make sure the account connects to SQL Server Management Studio has required permissions to access the shared folder.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Maybe you are looking for
-
Performance issues with the Vouchers index build in SES
Hi All, We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2. As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers) We are facing severe performance issues with
-
Hello, We build some RFCs to be called from a e*way (Seebeyond). Everything seem to work fine until we change some of the RFC code, and the eway steel run the old code. I even cleared the code of the RFC in the SAP system and the eway still run the
-
Backup fail after kernel patches updated
Hello friends i have update kernel pathes. then backup is failing cont. now my patch level is 114. im getting error please suggest. Job started Step 001 started (program RSDBAJOB, variant &0000000000235, user ID BASIS1) Execute logical command BRCON
-
The configuration parameters of 'BAPI_CUSTOMERCONTRACT_CHANGE'
Hi experts, I want to use 'BAPI_CUSTOMERCONTRACT_CHANGE' to delete item 000020 in contract 12345678.But alway failed.Please reference below data. Contract : 12345678 Item Material High level Item 000010 HA001 000020 HA002 00001
-
Missing LAV Audio Channel - Urgent
Hi there I am new to Premiere but used it for a corporate video. I imported all the MOV files, and now I can't find the LAV audio stream. I have tried reimporting the footage but I just get the Mic sound and no LAV. Any suggestions of what I have don