Error in table binding (Select an attribute of type string)

Dear All,
I'm doing the TUT_FLIGHTLISTexample of the webdynpro. Now i'm struck at the step of Table Binding. System says that error for UI element...select an attribute of type string.. Please suggest.
Thanks,
Anup.

Hi,
May be you trying to bind TextView UIElement in table to a contextAttribute of type other than "String".
Please change the UIElement type.
Regards, Anilkumar

Similar Messages

How to filter by attributes with type Strings

The documentation is not really detailed about setting attributes with type Strings. I assume I've to type each string value in a new line in the set attributes dialog box. This works fine and my XML looks like this <para CMS = "prodA prodB"> having set the two string values "prodA" and "prodB". But how to filter these attributes? The filter CMS="prodA" shows my paragraph correctly, but CMS="prodB" does not show this paragraph as it should. Filters seem to match only the first of the set of string values. I would like to show this paragraph in two document versions for these two products prodA and prodB. Framemaker 8.0.3 Tilman

Tilman,
this is something that AFAIK is not supported by FrameMaker's own attribute based filtering.
But, without changing your documents, if you install the *free* ABCM (Attribute-based condition management) plug-in from weststreet consulting, you will succeed. Be sure to read the tutorial!
http://weststreetconsulting.com/
- Michael

Lifecycle issue with table binding + read-only attributes: ADF BUG

Hello all,
I have found what I believe to be an easily reproducible bug in ADF that reproduces in 10.1.3.x, but not in 11g (at least not in drop 6). The best way to describe the bug would be to walk through a simple set of steps to reproduce the bug:
1). Create a new application (ADF BC + ADF Faces).
2). In the model project, create a new Entity Object from the Employee table in the default HR schema. Allow JDev to create an updatable view object and an AM as well.
3). Put a validation rule on the first name attribute of the EO (can be anything, really - I made mine so that the first name cannot be "foo").
4). Test everything using the BC tester if you like.
5). In the UI project, create a new JSPX page.
6). Drag the updatable VO on to your page as an updatable af:table.
7). Put an af:commandButton on the page. Bind its Action or ActionListener to a method in a new backing bean. Put some simple code (I used System.out.println) in the backing bean method.
8). Run the jspx page.
9). Put some invalid data in (e.g. "foo" in the first name field) and click the af:commandButton. Verify that you get an error message and that the Action/ActionListener method DOES NOT fire. So far, so good.
10). Now, to demonstrate the problem. First, look at the page definition for the jspx file. Identify the first attribute that is mentioned (in my case, it was the employee id).
11). Go to the updatable view object and make the attribute from #10 read-only or updatable when new only.
12. Now, repeat step 9 - you should see the error message AND also see that the Action/ActionListener method was executed. You will also see in the messages window that ADF attempted to set the value of the read-only attribute, and thus got a ReadOnlyAttrException.
This issue only happens if the first attribute mentioned in the table binding is read-only. A workaround would simply be to re-order the attributes in the table binding of the pagedef so that the first attribute isn't read-only.
Don't ask how I figured this out ;)
Best,
John

Hi Frank,
Yes, I simply scripted it out this way to contrast the behaviour if the first attribute was read-only vs not read-only. I found the issue on a page in our app that was simply drag-and-drop the VO from the data control on the page.
It's quite annoying, because our particular use case that hit this error is a "save" button on the page. If the commit operation doesn't return any errors (and it doesn't in this use case!), we add a JSF message saying "save successful" - then the attribute errors are further added later in the page lifecycle, so we get 3 messages: "Save successful" and "Fix this error" and "Tried to set read-only attribute" - quite confusing to the end-user when the only message they should see is "fix this error."
At any rate, the fix is to simply re-order the attributes in the page definition - that doesn't affect the UI at all, other than to fix this issue.
John

Advanced Table Multiple Selection View Attribute Type

Hi,
I have an advanced table with multiple selection. The multiple selection is associated with a view object attribute that is of type "String". In the create mode, the view attribute stores "Y" for the selected rows. But in the update mode, when I try to initialize the VO from the DB table, the multiple selection checkboxes are not selected for the rows where the DB value of the associated attribute is "Y". Somebody told me that if I specify the type of the DB attribute associated, to Boolean (and also the view attribute as Boolean), then this problem wouldn't occur. Is that correct or I must be doing something else wrong?
Thanks,
Amit

Hi Pratap,
It's quite simple actually. I mean the problem defintion :-) (not the solution)
I have a table with multipleselection. Initially the user does a "Select All" and the data is committed to the DB.
Once committed I don't want the user to change the selection, hence I need to hide the checkbox ( there is no way to make it read only).
To do this, I make the multipleselectionbean as rendered=false. But when the page is committed again, the row selection is getting changed back to "N" for all rows.
Now if I don't hide the multipleselection bean, the checkboxes appear as selected and the commit doesn't change the value to "N".
Hope the problem is clear now.

Error COM_PRODUCT812 when syncing products with Attribute Set Type

Good Morning,
I was wondering if anyone could help me with an error I am receiving when synchronizing products over with a set type for the MARC table.
I get the following error for some products when I load them initially. I only get this error on the initial load of the product and if I comment out the code in IF_EX_PRODUCT_CUSTOMER2~MAP_R3_TO_CRM_MATERIAL to populate the set type it runs fine, so it does not seem to be data related since I can comment the code back in and resync the product and it comes over fine with the set type information included.
Any help would be appreciate.
Here is the error message a receive
Serious error in tables or in program
Message no. COM_PRODUCT812
Diagnosis
This message is issued in unanticipated situations.
For example, tables do not have corresponding data records. Missing information in the records in the one table is read from the other table, however the relevant data record does not exist.
Here is the code from IF_EX_PRODUCT_CUSTOMER2~MAP_R3_TO_CRM_MATERIAL that fills the set type informaiton. The set type is made up of product ID and plant as the key fields and profit center as the zz00010 field
               WHEN 'ZMARC_SET'.
          IF is_mara-material = lv_ext-field2(18).
            CLEAR ls_zmarc_set.
            ls_zmarc_set-relation-owner   = 'X'.
            ls_zmarc_set-relation-logsys = cs_product_bdoc-header-com_product-logsys.
            ls_zmarc_set_row-data-zzk0010 = lv_ext-field2(18).
            lv_temp_string = ls_zmarc_set_row-data-zzk0010.
            lv_is_numeric = zl_crm_utils=>is_numeric( iv_text = lv_temp_string ).
            IF lv_is_numeric = '1'.
              SHIFT ls_zmarc_set_row-data-zzk0010 LEFT DELETING LEADING '0'.
            ENDIF.
            ls_zmarc_set_row-data-zzk0011 = lv_ext-field2+18(4).
            ls_zmarc_set_row-data-zz0010 = lv_ext-field2+22(10).
            lv_temp_string = ls_zmarc_set_row-data-zz0010.
            lv_is_numeric = zl_crm_utils=>is_numeric( iv_text = lv_temp_string ).
            IF lv_is_numeric = '1'.
              SHIFT ls_zmarc_set_row-data-zz0010 LEFT DELETING LEADING '0'.
            ENDIF.
            APPEND ls_zmarc_set_row TO ls_zmarc_set-set.
            APPEND ls_zmarc_set TO cs_product_bdoc-data-zmarc_set.
            APPEND ls_settype-frgtype_id TO cs_product_bdoc-data-mnt_settype.
          ENDIF.
Thanks,
Eric Matson

Hello Eric,
Without debugging, it is bit difficult to tell the actual reason for the above error.
If you are comfortable with debugging, then you can put the watch point in COM_PRODUCT812 and try to find the reason.
Please note that in order to debug, you have to de-register the queue R3AI_MATERIAL(for initial load) in CRM system.
Once you execute the load in txn:R3AS, you can see that in CRM txn:SMQ2, queue entry would be waiting for debugging.
Hope this helps.
Best Regards,
Shanthala Kudva.

How to store text in AD attributes of type String(Unicode)

In our company, we store the name of the building in which an employee works in one of the ActiveDirectory attributes named extensionAttribute# where # represents a number form 1-15. I want to be able to store the names of buildings in the AD
attribute named "buildingName". According to the
buildingName attribute in the MSDN library, the syntax is "String(Unicode)".
When I try something that seems simple to write some text into this attribute such as
Set-QADUser jdoe -ObjectAttributes @{buildingName="My Building Name"}
I get an error that says "Set-QADUser : The requested operation did not satisfy one or more constraints associated with the class of the object."
I have been searching forums and code libraries for a solution to this issue, but I do not understand why I can't store string data into this attribute. I did try the following code snippets to try to convert the string to Unicode (and UTF-8) before I wrote
to the buildingNameAttribute, but I still get the same error.
$text = "My Building Name"
$enc = [System.Text.Encoding]::Unicode
# $enc = [System.Text.Encoding]::UTF8
$encText = $enc.GetBytes($text)
$encText
Set-QADUser jdoe -ObjectAttributes @{buildingName=$encText}
Has anyone else had this issue or know how to overcome it? I can, of course, continue to use the extensionAttribute in which I currently have the data stored, but I really want to free it up and use the "buildingName" attribute.
Gardner Rowe Systems Analyst III UT MD Anderson Cancer Center - Making Cancer History

From your link:
buildingName attribute
The name of the building where an organization or organizational unit is based.
IOW, it is an attribute of organization or organizational unit class of object not a user object, so you can't set it for a user.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Advanced Table Multiple Selection

Hi,
I have created a advanced table under query bean with multiple selection feature.After querying the advanced table bean When i select the row in the table and click on another button i have writtten a logic in process from request to select only those rows selected in table ,but the view attribute of select check box is retuning null is there any way to identify the rows selected

Use this code in AMImpl. It will definitely work. I have tried. Don't forget to create a Transient Attribute of Type String [[here transient attr is Select]] in the VO.
public void selectFlag()
System.out.println("In the selectFlag");
SombitTestVOImpl vo = (SombitTestVOImpl)findViewObject("SombitTestVO1");
if (vo != null)
Row[] arow = vo.getFilteredRows("Select", "Y");
System.out.println("Row count is"+ arow);
if(arow != null && arow.length > 0)
for(int i=0; i<arow.length; i++)
System.out.println("Value of i is"+ i);
String Job = (String) arow [].getAttribute("Job"); // here you have to write arow followed by i in square bracket
Date NotifyDate = (Date) arow [[i]].getAttribute("NotifyDate"); // here you have to write arow followed by i in square bracket
System.out.println("Value of Job is "+ Job);
System.out.println("Value of NotifyDate is "+ NotifyDate);
Cheers
Sombit :)

Valid attribute-class types for af:regionDef ?

The only example or documentation I can find related to attributes of a regionDef are in /tagdoc/core/regionDef.html where there is an example which uses attributes of type String. Is it possible to use other classes? Any special syntax required in the EL expressions which use them? In another thread the following was suggested:
<af:commandButton text="Save"
action="#{sessionScope[regionAttrs.pageBeanName].save}"/>
where pageBeanName is an attribute of type String.
Unfortunately the page beans are mixed amoung the session and request scopes. Is there a way to pass in the scope or the actual pageBean? Alternatively I guess I could bind the action to a method with exception handling code so each scope could be checked in turn until the page bean was located but that seems a little heavy handed.

To answer my own question ;-)
Yes you can use other class types. Specifically I figured out how to use a Bean and more genericly a Java Interface (to which I passed the Bean). For example:
<faces-config>
<component-type>oracle.adfdemo.region.clientPageFooter</component-type>
 <component-class>
 oracle.adf.view.faces.component.UIXRegion
 </component-class>
 <component-extension>
 <region-jsp-ui-def>/regions/clientPageFooter.jspx</region-jsp-ui-def>
 </component-extension>
 <attribute>
 <attribute-name>pageBean</attribute-name>
 <attribute-class>demoOne.ClientPageFooter</attribute-class>
 <attribute-extension>
 <required>true</required>
 </attribute-extension>
 </attribute>
</component>
</faces-config>
package demoOne;
public interface ClientPageFooter
public String save();
public String reset();
public class ClientDetailPage implements ClientPageFooter
public String save()
 return "returnToClientList";
public String reset()
 return null;
<af:regionDef var="regionAttrs" >
 <af:commandButton text="Reset"
 action="#{regionAttrs.pageBean.reset}"/>
 <af:commandButton text="Save"
 action="#{regionAttrs.pageBean.save}"/>
 <af:commandButton text="Cancel" action="returnToClientList"/>
</af:regionDef>
 <af:region regionType="oracle.adfdemo.region.clientPageFooter"
 id="clientPageFooter">
 <f:attribute name="pageBean" value="#{ClientDetailPage}"/>
 </af:region>Hope that helps someone :-)

Error in query: [Microsoft][SQL Server Native Client 10.0][SQL Server]Must specify table to select from. '' (SWEI)

Hi All
below query giving me error in query generator but working well in Sql server.
error: [Microsoft][SQL Server Native Client 10.0][SQL Server]Must specify table to select from. '' (SWEI)
Select
T1.U_grp01 As 'BA',T3.DocDate As 'Posting Date',Month(T3.DocDate) As 'PostMonth',Year(T3.DocDate) As 'PostYear',
'AR Invoice' As 'Type',T3.DocNum As 'Doc No',T3.CardCode As 'Cust. Code',T3.CardName As 'Cust. Name',T5.SlpName As 'Sale Emp. Name',
T4.IndustryC As 'Channel Type',T6.CityB As 'BillToCity',T7.Name As 'BillToState',T6.CityS As 'ShipToCity',T8.Name As 'ShipToState',
T4.U_Une_Zone As 'Zone',
T2.ItmsGrpNam As 'L1',T0.LineNum As 'Row No',T0.ItemCode As 'ItemCode',T0.Dscription As 'Item Name',t0.whscode,
T0.Quantity As 'Quantity',T0.StockPrice As 'COGS Price',IsNull(Sum(T0.Quantity * T0.StockPrice),0) As 'COGS Value',T0.VatSum As 'Tax Amount',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.PriceBefDi Else (T0.PriceBefDi * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.INMPrice Else (T0.INMPrice * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then Sum(T0.Quantity * T0.INMPrice) Else Sum(T0.Quantity * T0.INMPrice * T0.Rate) End) Else T0.LineTotal End) ,0) As 'Sales Value',t9.linetotal as 'Freight',
T3.DocType As 'DocType',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = -90
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'BED',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = -60
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'Cess',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = 9
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'HeCess',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE (INV4.StaType = 1 or inv4.staType = 8)
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'VAT',
(SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
FROM INV4
WHERE INV4.StaType = 8
AND INV4.DocEntry = T3.DocEntry
AND INV4.LineNum = T0.LineNum) AS 'CST'
From INV1 T0
Left Join OITM T1 On T1.ItemCode=T0.ItemCode
Left Join OITB T2 On T2.ItmsGrpCod=T1.ItmsGrpCod
Left Join OINV T3 On T3.DocEntry=T0.DocEntry
Left Join OCRD T4 On T4.CardCode=T3.CardCode
Left Join OSLP T5 On T5.SlpCode=T4.SlpCode
Left Join INV12 T6 On T6.DocEntry=T0.DocEntry
Left Join OCST T7 On T7.Code=T6.StateB and T7.Country='IN'
Left Join OCST T8 On T8.Code=T6.StateS and T8.Country='IN'
left join inv3 t9 on t9.docentry = t3.docentry
WHERE T3.[DocDate] >= [%0] and T3.[DocDate] <= [%1] and t3.U_UNE_GCAT = '2'
Group By T1.U_grp01,T3.DocEntry,T3.DocNum,T3.DocDate,T0.LineNum,T3.CardCode,T3.CardName,T5.SlpName,T4.IndustryC,T4.U_Une_Zone,
T6.CityB,T7.Name,T6.CityS,T8.Name,T0.VatSum,T0.Currency,T0.Rate,T3.DocType,T0.Price,T0.LineTotal,
T2.ItmsGrpNam,T0.ItemCode,T0.Dscription,T0.StockPrice,T0.INMPrice,T0.PriceBefDi,T0.Quantity,t9.linetotal,t0.WhsCode
Union All
Select
T1.U_grp01 As 'BA',T3.DocDate As 'Posting Date',Month(T3.DocDate) As 'PostMonth',Year(T3.DocDate) As 'PostYear',
'AR Invoice' As 'Type',T3.DocNum As 'Doc No',T3.CardCode As 'Cust. Code',T3.CardName As 'Cust. Name',T5.SlpName As 'Sale Emp. Name',
T4.IndustryC As 'Channel Type',T6.CityB As 'BillToCity',T7.Name As 'BillToState',T6.CityS As 'ShipToCity',T8.Name As 'ShipToState',
T4.U_Une_Zone As 'Zone',
T2.ItmsGrpNam As 'L1',T0.LineNum As 'Row No',T0.ItemCode As 'ItemCode',T0.Dscription As 'Item Name',t0.whscode,
T0.Quantity As 'Quantity',T0.StockPrice As 'COGS Price',IsNull(Sum(T0.Quantity * T0.StockPrice),0) As 'COGS Value',T0.VatSum As 'Tax Amount',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.PriceBefDi Else (T0.PriceBefDi * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then T0.INMPrice Else (T0.INMPrice * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
IsNull((Case When T3.DocType='I' Then (Case When T0.Currency = 'INR' Then Sum(T0.Quantity * T0.INMPrice) Else Sum(T0.Quantity * T0.INMPrice * T0.Rate) End) Else T0.LineTotal End) ,0) As 'Sales Value',t9.linetotal as 'Freight',
T3.DocType As 'DocType',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = -90
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'BED',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = -60
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'Cess',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = 9
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'HeCess',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE (rin4.StaType = 1 or rin4.staType = 8)
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'VAT',
(SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
FROM rin4
WHERE rin4.StaType = 8
AND rin4.DocEntry = T3.DocEntry
AND rin4.LineNum = T0.LineNum) AS 'CST'
From rin1 T0
Left Join OITM T1 On T1.ItemCode=T0.ItemCode
Left Join OITB T2 On T2.ItmsGrpCod=T1.ItmsGrpCod
Left Join Orin T3 On T3.DocEntry=T0.DocEntry
Left Join OCRD T4 On T4.CardCode=T3.CardCode
Left Join OSLP T5 On T5.SlpCode=T4.SlpCode
Left Join rin12 T6 On T6.DocEntry=T0.DocEntry
Left Join OCST T7 On T7.Code=T6.StateB and T7.Country='IN'
Left Join OCST T8 On T8.Code=T6.StateS and T8.Country='IN'
left join rin3 t9 on t9.docentry = t3.docentry
WHERE T3.[DocDate] >= [%0] and T3.[DocDate] <= [%1] and t3.U_UNE_GCAT = '2'
Group By T1.U_grp01,T3.DocEntry,T3.DocNum,T3.DocDate,T0.LineNum,T3.CardCode,T3.CardName,T5.SlpName,T4.IndustryC,T4.U_Une_Zone,
T6.CityB,T7.Name,T6.CityS,T8.Name,T0.VatSum,T0.Currency,T0.Rate,T3.DocType,T0.Price,T0.LineTotal,
T2.ItmsGrpNam,T0.ItemCode,T0.Dscription,T0.StockPrice,T0.INMPrice,T0.PriceBefDi,T0.Quantity,t9.linetotal,t0.WhsCode
Thanks in Advance

Hi deepak..
try this
/* SELECT FROM OSRT P1 */
DECLARE @FROM AS DATE
/* WHERE */
SET @FROM = /* P1.FromDate */ '[%1]'
/* SELECT FROM OSRT P2 */
DECLARE @TO AS DATE
/* WHERE */
SET @TO = /* P2.ToDate */ '[%2]';
SELECT T1.U_grp01 AS 'BA',
 T3.DocDate AS 'Posting Date',
 MONTH(T3.DocDate) AS 'PostMonth',
 YEAR(T3.DocDate) AS 'PostYear',
 'AR Invoice' AS 'Type',
 T3.DocNum AS 'Doc No',
 T3.CardCode AS 'Cust. Code',
 T3.CardName AS 'Cust. Name',
 T5.SlpName AS 'Sale Emp. Name',
 T4.IndustryC AS 'Channel Type',
 T6.CityB AS 'BillToCity',
 T7.Name AS 'BillToState',
 T6.CityS AS 'ShipToCity',
 T8.Name AS 'ShipToState',
 T4.U_Une_Zone AS 'Zone',
 T2.ItmsGrpNam AS 'L1',
 T0.LineNum AS 'Row No',
 T0.ItemCode AS 'ItemCode',
 T0.Dscription AS 'Item Name',
 t0.whscode,
 T0.Quantity AS 'Quantity',
 T0.StockPrice AS 'COGS Price',
 ISNULL(SUM(T0.Quantity * T0.StockPrice), 0) AS 'COGS Value',
 T0.VatSum AS 'Tax Amount',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN T0.PriceBefDi
 ELSE (T0.PriceBefDi * T0.Rate)
 END
 ELSE T0.Price
 END
 0
 ) AS 'Sales Price',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN T0.INMPrice
 ELSE (T0.INMPrice * T0.Rate)
 END
 ELSE T0.Price
 END
 0
 ) AS 'Sales Price',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN SUM(T0.Quantity * T0.INMPrice)
 ELSE SUM(T0.Quantity * T0.INMPrice * T0.Rate)
 END
 ELSE T0.LineTotal
 END
 0
 ) AS 'Sales Value',
 t9.linetotal AS 'Freight',
 T3.DocType AS 'DocType',
 SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
 FROM INV4
 WHERE INV4.StaType = -90
 AND INV4.DocEntry = T3.DocEntry
 AND INV4.LineNum = T0.LineNum
 ) AS 'BED',
 SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
 FROM INV4
 WHERE INV4.StaType = -60
 AND INV4.DocEntry = T3.DocEntry
 AND INV4.LineNum = T0.LineNum
 ) AS 'Cess',
 SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
 FROM INV4
 WHERE INV4.StaType = 9
 AND INV4.DocEntry = T3.DocEntry
 AND INV4.LineNum = T0.LineNum
 ) AS 'HeCess',
 SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
 FROM INV4
 WHERE (INV4.StaType = 1 OR inv4.staType = 8)
 AND INV4.DocEntry = T3.DocEntry
 AND INV4.LineNum = T0.LineNum
 ) AS 'VAT',
 SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
 FROM INV4
 WHERE INV4.StaType = 8
 AND INV4.DocEntry = T3.DocEntry
 AND INV4.LineNum = T0.LineNum
 ) AS 'CST'
FROM INV1 T0
 LEFT JOIN OITM T1
 ON T1.ItemCode = T0.ItemCode
 LEFT JOIN OITB T2
 ON T2.ItmsGrpCod = T1.ItmsGrpCod
 LEFT JOIN OINV T3
 ON T3.DocEntry = T0.DocEntry
 LEFT JOIN OCRD T4
 ON T4.CardCode = T3.CardCode
 LEFT JOIN OSLP T5
 ON T5.SlpCode = T4.SlpCode
 LEFT JOIN INV12 T6
 ON T6.DocEntry = T0.DocEntry
 LEFT JOIN OCST T7
 ON T7.Code = T6.StateB
 AND T7.Country = 'IN'
 LEFT JOIN OCST T8
 ON T8.Code = T6.StateS
 AND T8.Country = 'IN'
 LEFT JOIN inv3 t9
 ON t9.docentry = t3.docentry
WHERE T3.[DocDate] >= @FROM
 AND T3.[DocDate] <= @TO
 AND t3.U_UNE_GCAT = '2'
GROUP BY
 T1.U_grp01,
 T3.DocEntry,
 T3.DocNum,
 T3.DocDate,
 T0.LineNum,
 T3.CardCode,
 T3.CardName,
 T5.SlpName,
 T4.IndustryC,
 T4.U_Une_Zone,
 T6.CityB,
 T7.Name,
 T6.CityS,
 T8.Name,
 T0.VatSum,
 T0.Currency,
 T0.Rate,
 T3.DocType,
 T0.Price,
 T0.LineTotal,
 T2.ItmsGrpNam,
 T0.ItemCode,
 T0.Dscription,
 T0.StockPrice,
 T0.INMPrice,
 T0.PriceBefDi,
 T0.Quantity,
 t9.linetotal,
 t0.WhsCode
UNION ALL
SELECT T1.U_grp01 AS 'BA',
 T3.DocDate AS 'Posting Date',
 MONTH(T3.DocDate) AS 'PostMonth',
 YEAR(T3.DocDate) AS 'PostYear',
 'AR Invoice' AS 'Type',
 T3.DocNum AS 'Doc No',
 T3.CardCode AS 'Cust. Code',
 T3.CardName AS 'Cust. Name',
 T5.SlpName AS 'Sale Emp. Name',
 T4.IndustryC AS 'Channel Type',
 T6.CityB AS 'BillToCity',
 T7.Name AS 'BillToState',
 T6.CityS AS 'ShipToCity',
 T8.Name AS 'ShipToState',
 T4.U_Une_Zone AS 'Zone',
 T2.ItmsGrpNam AS 'L1',
 T0.LineNum AS 'Row No',
 T0.ItemCode AS 'ItemCode',
 T0.Dscription AS 'Item Name',
 t0.whscode,
 T0.Quantity AS 'Quantity',
 T0.StockPrice AS 'COGS Price',
 ISNULL(SUM(T0.Quantity * T0.StockPrice), 0) AS 'COGS Value',
 T0.VatSum AS 'Tax Amount',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN T0.PriceBefDi
 ELSE (T0.PriceBefDi * T0.Rate)
 END
 ELSE T0.Price
 END
 0
 ) AS 'Sales Price',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN T0.INMPrice
 ELSE (T0.INMPrice * T0.Rate)
 END
 ELSE T0.Price
 END
 0
 ) AS 'Sales Price',
 ISNULL(
 CASE
 WHEN T3.DocType = 'I' THEN (
 CASE
 WHEN T0.Currency = 'INR' THEN SUM(T0.Quantity * T0.INMPrice)
 ELSE SUM(T0.Quantity * T0.INMPrice * T0.Rate)
 END
 ELSE T0.LineTotal
 END
 0
 ) AS 'Sales Value',
 t9.linetotal AS 'Freight',
 T3.DocType AS 'DocType',
 SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
 FROM rin4
 WHERE rin4.StaType = -90
 AND rin4.DocEntry = T3.DocEntry
 AND rin4.LineNum = T0.LineNum
 ) AS 'BED',
 SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
 FROM rin4
 WHERE rin4.StaType = -60
 AND rin4.DocEntry = T3.DocEntry
 AND rin4.LineNum = T0.LineNum
 ) AS 'Cess',
 SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
 FROM rin4
 WHERE rin4.StaType = 9
 AND rin4.DocEntry = T3.DocEntry
 AND rin4.LineNum = T0.LineNum
 ) AS 'HeCess',
 SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
 FROM rin4
 WHERE (rin4.StaType = 1 OR rin4.staType = 8)
 AND rin4.DocEntry = T3.DocEntry
 AND rin4.LineNum = T0.LineNum
 ) AS 'VAT',
 SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
 FROM rin4
 WHERE rin4.StaType = 8
 AND rin4.DocEntry = T3.DocEntry
 AND rin4.LineNum = T0.LineNum
 ) AS 'CST'
FROM rin1 T0
 LEFT JOIN OITM T1
 ON T1.ItemCode = T0.ItemCode
 LEFT JOIN OITB T2
 ON T2.ItmsGrpCod = T1.ItmsGrpCod
 LEFT JOIN [dbo].[Orin] T3
 ON T3.DocEntry = T0.DocEntry
 LEFT JOIN OCRD T4
 ON T4.CardCode = T3.CardCode
 LEFT JOIN OSLP T5
 ON T5.SlpCode = T4.SlpCode
 LEFT JOIN rin12 T6
 ON T6.DocEntry = T0.DocEntry
 LEFT JOIN OCST T7
 ON T7.Code = T6.StateB
 AND T7.Country = 'IN'
 LEFT JOIN OCST T8
 ON T8.Code = T6.StateS
 AND T8.Country = 'IN'
 LEFT JOIN rin3 t9
 ON t9.docentry = t3.docentry
WHERE T3.[DocDate] >= @FROM
 AND T3.[DocDate] <= @TO
 AND t3.U_UNE_GCAT = '2'
GROUP BY
 T1.U_grp01,
 T3.DocEntry,
 T3.DocNum,
 T3.DocDate,
 T0.LineNum,
 T3.CardCode,
 T3.CardName,
 T5.SlpName,
 T4.IndustryC,
 T4.U_Une_Zone,
 T6.CityB,
 T7.Name,
 T6.CityS,
 T8.Name,
 T0.VatSum,
 T0.Currency,
 T0.Rate,
 T3.DocType,
 T0.Price,
 T0.LineTotal,
 T2.ItmsGrpNam,
 T0.ItemCode,
 T0.Dscription,
 T0.StockPrice,
 T0.INMPrice,
 T0.PriceBefDi,
 T0.Quantity,
 t9.linetotal,
 t0.WhsCode
rgds
Kennedy

Error while retrieving data from PL/SQL Table using SELECT st. (Urgent!!!)

Hi Friends,
I am using Oracle 8.1.6 Server, & facing problems while retrieving data from a PL/SQL Table:
CREATE or REPLACE PROCEDURE test_proc IS
TYPE tP2 is TABLE of varchar2(10); --declared a collection
dt2 tP2 := tP2('a','b','c');
i NUMBER(8);
begin
SELECT COUNT(*) INTO i FROM TABLE(CAST(dt2 as tP2));
DBMS_OUTPUT.PUT_LINE('**'||i);
end;
While executing the above procedure, I encountered foll. error:
ERROR at line 1:
ORA-00600: internal error code, arguments: [15419], [severe error during PL/SQL execution], [], [],
ORA-06544: PL/SQL: internal error, arguments: [pfrrun.c:pfrbnd1()], [], [], [], [], [], [], []
ORA-06553: PLS-801: internal error [0]
Can anyone please help me, where the problem is??
Is it Possible to retrieve data from PL/SQL TABLE using SELECT statement? & How ?
Thanks in advance.
Best Regards,
Jay Raval.

Thanks Roger for the Update.
It means that have to first CREATE TYPE .. TABLE in database then only I can fire a Select statement on that TYPE.
Actually I wanted to fire a Select statement on the TABLE TYPE, defined & declared in PLSQL stored procedure using DECLARE TYPE .. TABLE & not using CREATE TYPE .. TABLE.
I was eager to know this, because my organization is reluctant in using CREATE TYPE .. TABLE defined in the database, so I was looking out for another alternative to access PL/SQL TABLE using Select statement without defining it database. It would have been good if I could access a PLSQL TABLE using Select statement Declared locally in the stored procedure.
Can I summarize that to access a PL/SQL TABLE using SELECT statement, I have to first CREATE TYPE .. TABLE?
If someone have any other idea on this, please do let me know.
Thanks a lot for all help.
Best Regards,
Jay Raval.
You have to define a database type...
create type tP2 is table of varchar2(10)
CREATE OR REPLACE PROCEDURE TEST_PROC
IS
dt2 tP2 := tP2('a','b','c');
i NUMBER(8);
begin
SELECT COUNT(*) INTO i FROM TABLE(CAST (dt2 AS tP2));
DBMS_OUTPUT.PUT_LINE('**'||i);
end;
This will work.
Roger

Error while executing SQL query -' Must Specify Table to select from'

Hi all,
While executing query using query generator
it shows error message
[Microsoft][SQL Native Client][SQL Server]Must specify table to select from.
2). [Microsoft][SQL Nativ
SELECT T1.ItemCode, T1.Dscription AS 'Item Description', T1.Quantity, T1.Price, T1.LineTotal,
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-90 AND T1.LineNum=T2.LineNum) as 'BEDAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-60 AND T1.LineNum=T2.LineNum) as 'ECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=7 AND T1.LineNum=T2.LineNum) as 'HECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=1 AND T1.LineNum=T2.LineNum) as 'VATAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=4 AND T1.LineNum=T2.LineNum) as 'CSTAmt'
FROM dbo.[OPCH] T0 INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN PCH4 T2 ON T2.DocEntry=T0.DocEntry
WHERE T0.DocDate >='[%0]' AND T0.DocDate <='[%1]' AND T0.DocType = 'I'
GROUP BY T1.ItemCode,T1.Dscription,T1.Quantity, T1.Price, T1.LineTotal,T0.DocEntry,T1.DocEntry,T1.LineNum,T2.LineNum
It's executing fine in MS SQL Server Studio Management.
Please give y'r ideas to solve the problem.
Jeyakanthan

try this, it works fine in my B1:
SELECT T1.ItemCode, T1.Dscription AS 'Item Description', T1.Quantity, T1.Price, T1.LineTotal,
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-90 AND T1.LineNum=T2.LineNum) as 'BEDAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=-60 AND T1.LineNum=T2.LineNum) as 'ECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=7 AND T1.LineNum=T2.LineNum) as 'HECSAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=1 AND T1.LineNum=T2.LineNum) as 'VATAmt',
(Select SUM(T2.TaxSum) From PCH4 T2 Where T0.DocEntry=T2.DocEntry AND T2.staType=4 AND T1.LineNum=T2.LineNum) as 'CSTAmt'
FROM dbo.OPCH T0 INNER JOIN PCH1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN PCH4 T2 ON T2.DocEntry=T0.DocEntry
WHERE T0.DocDate >='[%0]' AND T0.DocDate <='[%1]' AND T0.DocType = 'I'
GROUP BY T1.ItemCode,T1.Dscription,T1.Quantity, T1.Price, T1.LineTotal,T0.DocEntry,T1.DocEntry,T1.LineNum,T2.LineNum
B1 don't like brackets!
Regards

Must specift the table to select from error in query generator.

SELECT OPCH.CardCode,OPCH.CardName, DateName(month,OPCH.TaxDate) + '-' + DateName(year,OPCH.TaxDate) As [Year],OPCH.TransId as [JE Ref],'IN' As [DocType]
,OPCH.DocEntry As [Base DocEntry],OPCH.WTSUM As [Recieved Amount],((OPCH.WTSUM/110.3) * 100 ) As [Invoice Amount],((OPCH.WTSUM/110.3) * 100 * 0.1) As [Service Tax]
,((OPCH.WTSUM/110.3) * 100 * 0.002) As [Edu.Cess],((OPCH.WTSUM/110.3) * 100 * 0.001) As [S.H.Cess]
,((OPCH.WTSUM/110.3) * 100 * 0.1) + ((OPCH.WTSUM/110.3) * 100 * 0.002) + ((OPCH.WTSUM/110.3) * 100 * 0.001) As [Total Service Tax]
FROM OPCH,PCH1
WHERE OPCH.DocEntry = PCH1.DocEntry
AND OPCH.WTSUM > 0
And PCH1.TargetType <> '19'
AND OPCH.DocDate >= [%0]
AND OPCH.DocDate <= [%1]
When i try to run this query in query generator system gives me error msg as "Must specify table to select from" if i remove the last two lines
" AND OPCH.DocDate >= [%0]
AND OPCH.DocDate <= [%1] "
it works fine in the query generator.
can any one help in this regards,
thanks,
praveen

Hai Praveen!
This problem is because of [%0] in query.
Declare @FromDate as datetime
Declare @ToDate as datetime
set @FromDate = (select min(opch.docdate) from opch where opch.docdate >= '[%0]')
set @ToDate = (select max(opch.docdate) from opch where opch.docdate <= '[%1]')
Use this query in first lines of ur query and write your query.
SELECT OPCH.CardCode,OPCH.CardName, DateName(month,OPCH.TaxDate) + '-' + DateName(year,OPCH.TaxDate) As Year,OPCH.TransId as JE Ref,'IN' As DocType
,OPCH.DocEntry As Base DocEntry,OPCH.WTSUM As Recieved Amount,((OPCH.WTSUM/110.3) * 100 ) As Invoice Amount,((OPCH.WTSUM/110.3) * 100 * 0.1) As Service Tax
,((OPCH.WTSUM/110.3) * 100 * 0.002) As http://Edu.Cess,((OPCH.WTSUM/110.3) * 100 * 0.001) As http://S.H.Cess
,((OPCH.WTSUM/110.3) * 100 * 0.1) + ((OPCH.WTSUM/110.3) * 100 * 0.002) + ((OPCH.WTSUM/110.3) * 100 * 0.001) As Total Service Tax
FROM OPCH,PCH1
WHERE OPCH.DocEntry = PCH1.DocEntry
AND OPCH.WTSUM > 0
And PCH1.TargetType '19'
AND OPCH.DocDate >= @FromDate
AND OPCH.DocDate <= @ToDate
Regards,
Thanga Raj.K

Error in Event Binding for Table UI element

Hi,
I had created a table UI element in my web dynpro component and it worked fine. After a few weeks, while I was making some other changes in the same module and did a syntax check on the component, I got this error "The event binding for element "TBL_ABC" contains errors". There is a "Correct errors" button given along with this error message, which removes the error. But I just wanted to know what is the reason for this error.
Regards,
Akshatha.

Hi,
Please check for the cardinality of the node which you are using to bind for the TABLE UI element.
I think the cardinality should be either 1:N or 0:N.
Give it a try.
Regards,
Lekha

[Duplicate:ignore]Mapping Errors: no table selected, but unable to select

Sorry Duplicate Posting. I am unable to delete.
[Lost Cause] Mapping Errors: no table selected, but unable to select one
Message was edited by:
RWBerg

Update: I unmapped connections to the problem causing table object (Group), and deactivated the descriptor. After deleting the named query dependencies, the mapping report succeeded.
However, when reactivating the mappings from the other descriptors they would still not allow me to select a reference table for the Groups class. The same is true going out to those descriptors from the Groups class.
Does anyone know why the reference tables are not populating the drop-down on the "Table Reference" tab?
Screenshot available [more can be provided as needed]: http://www.rwberg.org/ref/help/oracle_forums_ss_mapping_11-29-07.PNG

[SOLVED :)] Need help with adf table row selection

Hi,
In my application I am displaying results in a table. The DisplayRow property of table is set to Selected
There are Next and Back buttons which help user to view details associated to the next/previous rows.
I am using ADF 11g
When user clicks Next or Previous button, then the selection of the row should also gets updated
To achieve this i wrote below piece of code:
this.tblS.getSelectedRowKeys().clear();+
this.tblS.setRowIndex(count);+
RowKeySet rks = tblS.getSelectedRowKeys();+
rks.add(tblS.getRowKey());+
rks = tblS.getSelectedRowKeys();+
ISSUE:_
When i run application and click Next/Previous Button, all functionalities do take place properly, but a null pointer exception is also thrown._+
If i remove DisplayRow property of table from Selected to Default, every thing works good and no Exception is thrown_+
But as records in my table are going to be around 50-60 everytime, i need to set DisplayRow property of table to Selected.
Is there any way to achieve this? Solve this problem?
Some more details:_
I am using a POJO class to create DataController. This DataController is having a view Object which is used to create results table.
I have defined Primary key for my POJO Data Controller.
Here is code of xml file:*
+<?xml version="1.0" encoding="UTF-8" ?>+
+<JavaBean xmlns="http://xmlns.oracle.com/adfm/beanmodel" version="11.1.1.52.5"+
id="ProductListBean" Package="xxadf.mm.resources"
BeanClass="xxadf.mm.resources.ProductListBean"
isJavaBased="true">
+<Attribute Name="Product" Type="java.lang.String" PrimaryKey="true"/>+
+<Attribute Name="Stock" Type="java.lang.String"/>+
+<Attribute Name="Rate" Type="java.lang.String"/>+
+<Attribute Name="Accuracy" Type="java.lang.String"/>+
+<Attribute Name="Details" Type="java.lang.String"/>+
+<ConstructorMethod IsCollection="true"+
Type="xxadf.mm.resources.ProductListBean"
BeanClass="xxadf.mm.resources.ProductListBean"
id="ProductListBean"/>
+</JavaBean>+
Error Log:*
SEVERE: Server Exception during PPR, #1
java.lang.NullPointerException
at oracle.adfinternal.view.faces.model.binding.RowDataManager.getRowIndex(RowDataManager.java:200)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$FacesModel.getRowIndex(FacesCtrlHierBinding.java:506)
at org.apache.myfaces.trinidad.component.UIXIterator._fixupFirst(UIXIterator.java:414)
at org.apache.myfaces.trinidad.component.UIXIterator.__encodeBegin(UIXIterator.java:392)
at org.apache.myfaces.trinidad.component.UIXTable.__encodeBegin(UIXTable.java:168)
at org.apache.myfaces.trinidad.component.UIXCollection.encodeBegin(UIXCollection.java:517)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:399)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeHorizontalChild(PanelGroupLayoutRenderer.java:458)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$100(PanelGroupLayoutRenderer.java:30)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:618)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:560)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:125)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:201)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:167)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:317)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:392)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$300(PanelGroupLayoutRenderer.java:30)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:641)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:560)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:125)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:201)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:167)
at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:317)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailItemRenderer.access$100(ShowDetailItemRenderer.java:31)
at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailItemRenderer$ChildEncoderCallback.processComponent(ShowDetailItemRenderer.java:491)
at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailItemRenderer$ChildEncoderCallback.processComponent(ShowDetailItemRenderer.java:464)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:125)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:201)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:167)
at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailItemRenderer._encodeChildren(ShowDetailItemRenderer.java:406)
at oracle.adfinternal.view.faces.renderkit.rich.ShowDetailItemRenderer.encodeAll(ShowDetailItemRenderer.java:114)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeStretchedChild(RichRenderer.java:1523)
at oracle.adfinternal.view.faces.renderkit.rich.PanelTabbedRenderer.access$500(PanelTabbedRenderer.java:38)
at oracle.adfinternal.view.faces.renderkit.rich.PanelTabbedRenderer$BodyEncoderCallback.processComponent(PanelTabbedRenderer.java:969)
at oracle.adfinternal.view.faces.renderkit.rich.PanelTabbedRenderer$BodyEncoderCallback.processComponent(PanelTabbedRenderer.java:920)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:125)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:201)
at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:167)
at oracle.adfinternal.view.faces.renderkit.rich.PanelTabbedRenderer._renderTabBody(PanelTabbedRenderer.java:519)
at oracle.adfinternal.view.faces.renderkit.rich.PanelTabbedRenderer.encodeAll(PanelTabbedRenderer.java:233)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:221)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:820)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1187)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:751)
at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1494)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:771)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:942)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:202)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:685)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:261)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:193)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Please Help I have been struggling with this issue for long.
Thanks and Regards
Manav Ratra
Edited by: user11255144 on Feb 8, 2010 5:33 AM

Hi Arun,
Thanks for replying.
Actually in my application there is one result table and a section that is displaying complete details of the product selectd in result table.
The next/previous buttons are not binded with result table.
What I am doing is, I am puuliing data from VO and displaying it on form, whenever any of these buttons is clicked.
As soon as these buttons are clicked data is coming up, but selection state of table is not getting updated.
So to update selection state i wrote piece of code described in my previous post.
Everything works fine if displayRow property of table is not set to selected.
If i set display row property of table to selected, then i get a null pointer exception with message log defined in previous post.
Although NPE is thrown, yet all data is properly fetched and table selection is also updated. But am not able to get how this NPE is coming and hpw to fix it .
(I need to keep displayRow = selected, for all other cases NPE is not thrown)
Please help..
Thanks and Regards
Manav Ratra

Error in table binding (Select an attribute of type string)

Similar Messages

Maybe you are looking for