Error:(in tcodeVA02)"You cannot select assembly order 16600192 for deletion

when i am trying to delete one line item from sales order using VA02 tcode its throwing error "You cannot select assembly order 16600192 for deletion".
could you tell me please what might be the reason and how to resolve this issue.
waiting for your response.
thanks,
aritra
Message was edited by: Aritra Samanta
Message was edited by: Aritra Samanta

Let me ask you this: Is the assembly order 16600192 your VA02 order number? If not, your sales order item might have created an assembly order (with this number). Depending on its status, you may not be able to delete the assembly order and therefore the sales order item deletion is not possible.
Verify the assembly order status.
Good luck!

Similar Messages

  • Message V1748.You cannot select assembly order 1440363 for deletion.

    Dear Friends,
    I am getting the above error while rejecting a line item for sales order.
    Diagnosis says:
    Due to the current situation of the document, the system has attempted to mark the procurement element 1440363 with a deletion flag.
    This could, however, not be carried out, as the procurement element was in a state that does not allow the deletion flag to be set.
    I am unable to handle it.
    Please guide me in this regard.
    Regards,
    Srinivas

    Let me ask you this: Is the assembly order 16600192 your VA02 order number? If not, your sales order item might have created an assembly order (with this number). Depending on its status, you may not be able to delete the assembly order and therefore the sales order item deletion is not possible.
    Verify the assembly order status.
    Good luck!

  • You Cannot select assembly order for deletion error with BAPI_SALESORDER_CAHNGE after EHP6 upgrade

    Hi All,
    We are using Z transaction to update Wbs element data to sales order line item through BAPI_SALESORDER_CHANGE. After EHP6 upgrade while updating Wbs element data to old sales orders(Created before EHP6 upgrade)  we are getting  You cannot select assembly order < order number> for deletion (V1 748) error in BAPI return table, For multiple Sales order run.
    But if  we run the same order individually it is getting processed successfully. W e are passing the same values in individual and multiple case.
    We debugged the BAPI and found one more error related to Authorization, But BAPI return table is giving different error (V1 748)message. Please help us in finding the issue.

    Hi Sujay..
    Please check.
    http://help.sap.com/saphelp_47x200/helpdata/en/b7/58c4c87e0811d2b66a0000e82d8bd1/frameset.htm

  • DI-Error: You cannot select batch or serial numbers for a closed row

    Hello Experts,
    I have several B1-Systems connected to R/3-Systems via B1iSN.
    In B1 for example I have 2 rows in Purchase Order. One row was closed by a goods receipt - 1 row is still open.
    From our R/3-System we send Order-Acknowledgements to B1. Because line 1 is already closed we want to ignore row 1 and update only information in row 2. By using KeyExpansion I could solve that requirement (check in B1-System if row is already closed -> insert row in IDoc only with LineNum). For example:
    <Document_Lines>
      *<row>* <!-- ignore -->
        *<LineNum>0</LineNum>*
      *</row>*
       <row> <!-- update -->
        <LineNum>1</LineNum>
        <ItemCode>ABCDEFGHIJK</ItemCode>
      </row>
    </Document_Lines>
    Unfortunately DI-API does not allow to update each row separated. I always have to send all rows in IDoc even if one row is closed.
    For one B1-Company batchnumbers on every transaction is required. When creating Goods Receipt we have to define a batchnumber for item. But now if I want to update a open row (as described above) I get an B1iSN-Error:
    DI Error: (-10) You cannot select batch or serial numbers for a closed row
    Any ideas to solve that Error? Thanks.
    Regards,
    GB

    Hi Bastian,
    I have still one open question. How to tread Document Lines Additional Expenses?
    If I use the logic of visual order I still get the error "You cannot select batch or serial numbers for a closed row".
    Example:
    <Document_LinesAdditionalExpenses> 
    -      <row>
               <LineNumber>4</LineNumber>*no expenses*
    </row>
    -      <row>
               <LineNumber>0</LineNumber>*no expenses*
    </row>
    -     <row>
               <LineNumber>1</LineNumber>*no expenses*
    </row>
    -     <row>
               <LineNumber>2</LineNumber>*no expenses*
    </row>
    -     <row>
               <LineNumber>3</LineNumber>*expenses correct*
               <ExpenseCode>3</ExpenseCode>
               <LineTotal>10.00</LineTotal>
    </row>
    </Document_LinesAdditionalExpenses> 
    How can I solve that?
    Thanks and regards,
    GB

  • APP-SQLAP-10380: You cannot select this payment document

    User did a quick payment. When the check failed to print user voided the check and tried to reprint. Now when the user is trying to reissue the check they are getting the following: APP-SQLAP-10380: You cannot select this payment document because it is in use by another payment batch.
    I went through Metalink and found this article: R11i: Quick Payment For EFT Payments Will Not Release The Document To Pay Other Invoices [ID 158828.1]
    A query in the metalink article stated that "If this query returns rows then contact oracle support for a data fix."
    The query did return rows. However, this is rather urgent and I am unsure as to when Oracle Support will get back to me. I made a Sev 2 SR for this. I was wondering if there was any front end things I could do to clear this payment batch so I could reissue a check?
    Any help would be appreciated.
    Thanks

    Please see these docs.
    R11i: SEPA: AFTER PATCH 6741280, QUICK PAYMENTS ERROR APP-SQLAP-10380 [ID 1060865.1]
    App-Sqlap-10380 You cannot select this payment document payment batch formated [ID 309655.1]
    APP-SQLAP-10380: You Cannot Select This Payment Document Because it is in Use by Another Payment Batch [ID 1335053.1]
    R11i / R12: FAQ for Single European Payments (SEPA) [ID 791226.1]
    APXPAWKB After Using NL Payment Format For Quick Payments, Payment Format Cannot Be Used Anymore [ID 250332.1]
    Unable To Enter Quickcheck For Polish Eft Formats [ID 397791.1]
    Thanks,
    Hussein

  • Error "You cannot enter a partner function for output NEU"

    Hi Experts,
    I'm having these error "You cannot enter a partner function for output NEU" (message VN041) when I tried to assign a partner function (e.g OA)  in the conditions records for application "EV" (Purchase outline agreement). The system do not allow me to do this for any doc type (LP, LPA, MK, OA, etc). I'm using t-code NACE or MN08.
    I want to assign partner for key combination "Document Type". The conditions is already there but with no value, so I want to assign partner function "OA" or "VR".
    I already check all the configuration and looks fine. For example, define possible partner functions for output type "NEU" for application "EV" (Purc outline agree).
    Hope you can help me to find the problem.
    Thanks,
    Mairo.

    I have the error in NACE or using tcode MN08.
    As soon I executed those transaction the system shows the condition records created for varios Doc Type (e.g LP, LPA, MK, etc) but with no partner function assigned. For example:
    Doc. Type /  Name                     /             Funct  /   Partner     /            Medium  /  Date/time  /   Language
    LP        /       Scheduling Agreement     /  blank  / blank  /                                          2      /          3   /              EN
    LPA      /      Scheduling Agreement                              / blank    / blank   /                1        /       3         /        EN
    For example, I try to assign function "OA" for Doc. Type "LP", choose value from quickpick. Then when I press enter, the system give me the error "You cannot enter a partner function for output NEU", message no. VN041. Do not allow me to continue, so I have to leave this field blank, with no change.
    Thanks,

  • Error while querying - You cannot update this record

    Hi all,
    I have a builded a form and was successful when i enter the data. But when i query the form it is showing me the error FRM-14050 YOU CANNOT UPDATE THIS RECORD.
    I have pre-insert, pre-update and pre-query triggers at block level.
    In PRE_INSERT iam setting the property to insert allowed and true.
    same way for pre-update and pre-query.
    Can any one guide me.
    Thanks
    Sunil

    Hi
    check your fields name name and match with database fields.
    vikas

  • I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

    I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

    iLife '09 is not available as a download - it is only available as a purchase
    iLife '11 is available as a DVD purchase and the compoments of it are available from the App Store (iPhoto '11 (version 9.1.5), etc)
    Exactly what did you do? And exactly what does the error message say?
    On the surface it appears that you are attemptying to open a new library with an older version (iPhoto '09 can not open an iPhoto '11 library for example)
    LN

  • When trying to sign into facebook in settings for ios6, I get an error that says "You cannot sign in from your iPhone since you have opted out of Facebook Platform." What gives?

    When trying to sign into facebook in settings for ios6, I get an error that says "You cannot sign in from your iPhone since you have opted out of Facebook Platform." What gives?
    More info: I've combed through the settings in facebook and there is nothing that shows I'm blocking anything from accessing it.

    Sure sounds like a Facebook setting. When you look at your Privacy Settings in Facebook (on facebook.com), you should see something under "Apps you use" that says
    Turn off your ability to use apps, plugins, and websites on and off Facebook. After you turn this off, we will not store information about you when you use apps or websites off Facebook.
    The "Turn off" is a hyperlink that shuts down the Facebook platform. If you don't see this, or if the wording is different, you may have (inadvertently?) shut this off, and should be able to turn it back on.
    Edit: The sequence to that screen on facebook.com is: Privacy Settings (from the upper right dropdown), then "Ads, Apps and Websites" will have an "Edit settings" link to the right. This is where you'll see the "Apps you use" screen.

  • HT2404 When I try to download free updates for apps, I've suddenly started getting an error message saying: You cannot update this software since you have not owned the major version of this software." But I do own the apps. And I haven't changed my ID

    When I try to download free updates for apps, I've suddenly started getting an error message saying "You cannot update this software since you have not owned the major version of this software".
    But I HAVE owned the software, for ages. (And, in any case, the apps in question are all free.)
    And I don't have multiple Apple IDs.
    What can I do?
    Any advice much appreciated

    This can occur if you bought the machine used and iLife was reinstalled with another AppleID.
    This also can occur if the "free apps" you downloaded have paid upgraded versions and/or are now payware and you can't get updates.
    All software from MAS is copy protected, it might be free as in "no charge" but it's not free in the sense you can share it with others.

  • You cannot select more than 3 groups [Message 1030-3]

    Hello everyone,
    I'm having a problem is SAP B1.
    I don't know how but a client manage to set 4 fields from List of Item  as a group as you can see by this image.
    The problem is that when we try the uncheck the fields we receive the message "You cannot select more than 3 groups   [Message 1030-3]", even when we uncheck all fields or even when we try to restore defaults. The version of SAP is 9.0 PL00. Could you help me please? Thank you very much.
    Thanks and Best Regards,
    Dong Pham Nhat

    Hi,
    Please raise ticket to SAP support. Same thing we already discussed for 8.82 version also.
    Check this thread http://scn.sap.com/thread/3400153
    Thanks & Regards,
    Nagarajan

  • TS3899 Just updated to 7.0.6. Cannot Select multiple emails to move/delete.

    Just updated to 7.06. Cannot Select multiple emails to move/delete. I select Edit in any mailbox, trash or sent, then select one email to delete/move, after a few seconds, the email automatically 'unselects' the move and delete buttons deactivate, but the top status bar still has '1 selected'.
    If i try to select multiple emails I get to the 3rd or 4th one and then they all auto unselect.
    My Ipad without the update works fine. My daughters iphone 5 has the same issue and she just updated.

    I have no problem selecting multiple emails on iOS 7.0.6
    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

    I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

    Hello Hornet12,
    Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
    Using AirPlay
    http://support.apple.com/kb/HT4437
    AirPlay requirements and capabilities
    To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
    Stream content from
    Requirement
    Notes
    iPad
    iOS 4.3 or later.1
    From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
    With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
    iPhone (3GS or later)
    iPod touch
    (2nd generation or later)
    Computer
    iTunes 10.2 or later.
    Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
    Apple TV
    Apple TV software version 5.1 or later.
    Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
    Cheers,
    Allen

  • DVD Studio Pro - Why is it so easy to create stories, but you cannot group all them together for a simple PLAY all scenario, instead of going to scripts

    - Why is it so easy to create stories, but you cannot group all them together for a simple PLAY all scenario, surely it can be done? I am about to give scripting a shot but seriously it looks way to confusing compared to stories, I have several sub menus and in each sub menu I have a play all story, however what I also want to do is create a PLAY ALL from the main menu, any suggestions
    Erby60

    Duplicate all your stories, have a menu item with duplicate story 1 as the target, and set the end jump of duplicate story 1 to duplicate story 2, etc.  Shouldn't that work?   There may be a simpler way, but
    As far as adding documents, The simplest way is to build in dvdsp and then add a folder containing the docs to the project folder that dvdsp has created and use toast to burn it.   There may be a rule for naming this folder, but can't remember it at the moment.
    Hey, ya know there's something called the dvdsp manual.  A quick search found this
    In addition to the VIDEO_TS or HVDVD_TS folder, there are other items that can be part of the format process:
    A folder specified by the DVD-ROM content setting
    DVD@CCESS Installers
    You can change or set the folder to use for DVD-ROM content either when specifying the preformat settings or while configuring the format process. The DVD@CCESS Installers are included if the project used DVD@CCESS links and the Embed Text Data checkbox in the Disc Inspector is selected. See DVD@CCESS for more information on DVD@CCESS.

  • Acrobat 9 Pro Error 148:3 You cannot use this product at this time

    Am running XP Pro SP3 with Acrobat 9.0 Pro Extended.  Until I installed Comodo antivirus software yesterday, Acrobat worked fine.  Now when I open Acrobat I get an error message similar to this:  “You cannot use this product at this time. You must repair this problem by uninstalling and then reinstalling this product or contact your IT . . .  (148:3).”  Then when I click OK, Acrobat shuts down. 
    I’ve tried the Licensing fixes found at http://kb2.adobe.com/cps/405/kb405970.html but fixes didn’t work.  I uninstalled and reinstalled.  Now when I try to install updates, it looks like it’s installing but at the end the installation says it failed.
    Any ideas on how to resolve my problem?   Thank-you.     

    Bill, you're correct and thanks for your help.  In my particular case, Acrobat Pro was working fine until I upgraded Comodo (from the green/white shield to the red shield).  Thnking it was an Acrobat problem, I uninstalled Acrobat Pro and reinstalled Acrobat Pro with Comodo turned off.  Still got the "148:3" error msg.  Solution, I uninstalled Comodo and restarted the computer.  Then updated Acrobat Pro, there were two updates.  Restarted computer.  Then installed Comodo.  Everything now works fine.

Maybe you are looking for