You Cannot select assembly order for deletion error with BAPI_SALESORDER_CAHNGE after EHP6 upgrade

Hi All,
We are using Z transaction to update Wbs element data to sales order line item through BAPI_SALESORDER_CHANGE. After EHP6 upgrade while updating Wbs element data to old sales orders(Created before EHP6 upgrade) we are getting You cannot select assembly order < order number> for deletion (V1 748) error in BAPI return table, For multiple Sales order run.
But if we run the same order individually it is getting processed successfully. W e are passing the same values in individual and multiple case.
We debugged the BAPI and found one more error related to Authorization, But BAPI return table is giving different error (V1 748)message. Please help us in finding the issue.

Hi Sujay..
Please check.
http://help.sap.com/saphelp_47x200/helpdata/en/b7/58c4c87e0811d2b66a0000e82d8bd1/frameset.htm

Similar Messages

Error:(in tcodeVA02)"You cannot select assembly order 16600192 for deletion

when i am trying to delete one line item from sales order using VA02 tcode its throwing error "You cannot select assembly order 16600192 for deletion".
could you tell me please what might be the reason and how to resolve this issue.
waiting for your response.
thanks,
aritra
Message was edited by: Aritra Samanta
Message was edited by: Aritra Samanta

Let me ask you this: Is the assembly order 16600192 your VA02 order number? If not, your sales order item might have created an assembly order (with this number). Depending on its status, you may not be able to delete the assembly order and therefore the sales order item deletion is not possible.
Verify the assembly order status.
Good luck!

Message V1748.You cannot select assembly order 1440363 for deletion.

Dear Friends,
I am getting the above error while rejecting a line item for sales order.
Diagnosis says:
Due to the current situation of the document, the system has attempted to mark the procurement element 1440363 with a deletion flag.
This could, however, not be carried out, as the procurement element was in a state that does not allow the deletion flag to be set.
I am unable to handle it.
Please guide me in this regard.
Regards,
Srinivas

Let me ask you this: Is the assembly order 16600192 your VA02 order number? If not, your sales order item might have created an assembly order (with this number). Depending on its status, you may not be able to delete the assembly order and therefore the sales order item deletion is not possible.
Verify the assembly order status.
Good luck!

As good will gesture, we can help you with the upgrade for PSE 13. We would request you to place the order for Adobe Photoshop Elements 13 as an upgrade and then we will provide you the full version serial number for the same product against the new upgra

I RECIVED AN EMAIL FROM ADOBE AS : As good will gesture, we can help you with the upgrade for PSE 13. We would request you to place the order for Adobe Photoshop Elements 13 as an upgrade and then we will provide you the full version serial number for the same product against the new upgrade order" IS THIS UPGRADE FREE AND WHAT SHOULD I DO, HOW CAN I HAVE THIS UPGRADE?

Compare with on-line stores. The full version is often cheaper than Adobe's upgrade price.
See this example from Amazon, but check pricing in your own region.
http://www.amazon.com/gp/product/B00N4OLCRO/ref=s9_simh_gw_p65_d4_i2?pf_rd_m=ATVPDKIKX0DER &pf_rd_s=desktop-1&pf_rd_r=0F1GED9546928YP3PHC0&pf_rd_t=36701&pf_rd_p=1970559082&pf_rd_i=d esktop

Ki235 Error When PGI After Ehp6 Upgrade

Hello
What would cause KI235 error when PGI after ehp6 upgrade? We are upgrading to ehp6 and are receiving this error when PGIing delivery. It only does this in the upgraded client and not in non-upgraded client. The automatic account assignments match exactly in both clients and are not missing or incorrect.
Also check OKB9 setting it is perfectly ok.
Please advise,
Thanks,
Themba

This is a repetitive issue and have you searched the forum before posting?
G. Lakshmipathi

DI-Error: You cannot select batch or serial numbers for a closed row

Hello Experts,
I have several B1-Systems connected to R/3-Systems via B1iSN.
In B1 for example I have 2 rows in Purchase Order. One row was closed by a goods receipt - 1 row is still open.
From our R/3-System we send Order-Acknowledgements to B1. Because line 1 is already closed we want to ignore row 1 and update only information in row 2. By using KeyExpansion I could solve that requirement (check in B1-System if row is already closed -> insert row in IDoc only with LineNum). For example:
<Document_Lines>
*<row>* 
    *<LineNum>0</LineNum>*
*</row>*
   <row> 
    <LineNum>1</LineNum>
    <ItemCode>ABCDEFGHIJK</ItemCode>
</row>
</Document_Lines>
Unfortunately DI-API does not allow to update each row separated. I always have to send all rows in IDoc even if one row is closed.
For one B1-Company batchnumbers on every transaction is required. When creating Goods Receipt we have to define a batchnumber for item. But now if I want to update a open row (as described above) I get an B1iSN-Error:
DI Error: (-10) You cannot select batch or serial numbers for a closed row
Any ideas to solve that Error? Thanks.
Regards,
GB

Hi Bastian,
I have still one open question. How to tread Document Lines Additional Expenses?
If I use the logic of visual order I still get the error "You cannot select batch or serial numbers for a closed row".
Example:
<Document_LinesAdditionalExpenses>
-      <row>
           <LineNumber>4</LineNumber>*no expenses*
</row>
-      <row>
           <LineNumber>0</LineNumber>*no expenses*
</row>
-     <row>
           <LineNumber>1</LineNumber>*no expenses*
</row>
-     <row>
           <LineNumber>2</LineNumber>*no expenses*
</row>
-     <row>
           <LineNumber>3</LineNumber>*expenses correct*
           <ExpenseCode>3</ExpenseCode>
           <LineTotal>10.00</LineTotal>
</row>
</Document_LinesAdditionalExpenses>
How can I solve that?
Thanks and regards,
GB

Error-M2O-Settlement rule for assembly order for item...could not be genera

Hi,
When I am creating Sales Order (VA01) for M2O, I am able to do the costing and copy the EK02 condition type. I have verified the the incompletion log, it indicates that document is complete.
But while saving the sales order, the below error message is displaed:
Settlement rule for assembly order for item 000010 could not be generated. Should the order still be saved?
                Yes/No
1. If No is choosen the following error message is displayed
       Error when processing Production order
      Error when processing Production order
      Message no. V1380
      Diagnosis
        A technical error has occurred. On calling up the assembly interface, exception 5 was triggered. The exceptions have the following meanings:
1 = External block, 2 = General error, 3 = Insufficient data for the interface, 4 = Order was not found, 5 = Update has been rejected, 6 = Final document number for Production order is not issued. Procedure: Inform your system administrator.
2. If Yes is choosen, it is creating Production Order without settlement rule. Able to perform GI & Gr. If I try to enter settelement rule (Settlement receiver SDI - Sales document item) in production order (CO02), the belwo error message is displayed
"Distribution rule for Sales document item can only be created automatically Message no. KD063"
We are using the requierement class with below details:
Reqmts class: ZSO- for M2O
AAC = E, Valuation = A, Settlement profile =SD1, RAKey = 000004, Assembly type = 3.
Settlement profile contain:
Allocation structure, PA structure, Default object type = SDI. Valid receivers: Optional -Sales Order / Prof. seg.
If I make the Valuation field as blank in Reqmts class, there is no error while creating Sales order. And also Settelemnt rule with sales document item as receiver is successfully creating for the production order. Since the Valuation is blank in requirement class, it is Non valuated Sales order stock. All GIs & GR are non valuated
The business requirement is it should be valuated sales order stock and the production varinaces has to be settled to Sales order. Then Sales order has to be settled to COPA.
Need your valuable inputs to meet this requirement.
Let me know if you need any further details.
Thanks in advance.
Regards,
ADI

Dear SAP PP Consultant ,
What is the strategy group you are maintained in the material master ?

Why i cannot delate my photos when i press select? Icon for delete is not appear.

Why i cannot delate my photos when i press select? Icon for delete is not appear.

Did you use iTunes to sync those photos onto your device? If so then the only way to get them off is to use iTunes to sync them off.
When you sync them on you choose a folder and say 'put all the photos in here on my iPad', so to take them off you need to deselect that folder or remove photos from that folder and sync to take them off.

E613 SYST: You cannot determine the period for rule 03

Dear All,
We are configuring asset module and using MSTL dep key for Tax books. When we tried to create an asset with MSTL dep key, we encountered error - 'E613 SYST: You cannot determine the period for rule 03'. when verified config OAVH Define Calender Assignments transaction, Period control '03' is missing for fiscal year variant K4. Period control is exisiting in Maintain Period Control and but not in Define Calender Assignment. What I understand these period controls are being delivered by SAP. Not sure why period control '03' is missing. all other period control keys are available.
question is how to add period control 03 so that we can use MSTL dep key. we are currently using 4.7c. Any suggestions would be appreciated.
thanks
Sunil

message went abruptly before I finish.
+++++++++
continuing from previous email
Period control 01 has following entry in the transaction
Fiscal Year Variant Per control Name of the period control Year Month Day Period Mid Month
K4 01 Pro rata at period start date blank 0 0 blank not selected
If I follow SAP help to define period control '03', then I just need to copy period control '01' which is listed above and select 'Mid Month' check box.
Wondering anyone did this in the past. MSTL depreciation key is being used in MACRS tax for US. I am sure people who have implemented assets module for US with tax dep, they might have encountered this issue.
thanks
Sunil

Posting rule for assembly order for item 000000 could not be generated

Hi all,
While creating production order from sales order system giving an error message 'Posting rule for assembly order for item 000000 could not be generated.'
Kindly help to resolve the issue.
SmanS

Dear SAP PP Consultant ,
What is the strategy group you are maintained in the material master ?

APP-SQLAP-10380: You cannot select this payment document

User did a quick payment. When the check failed to print user voided the check and tried to reprint. Now when the user is trying to reissue the check they are getting the following: APP-SQLAP-10380: You cannot select this payment document because it is in use by another payment batch.
I went through Metalink and found this article: R11i: Quick Payment For EFT Payments Will Not Release The Document To Pay Other Invoices [ID 158828.1]
A query in the metalink article stated that "If this query returns rows then contact oracle support for a data fix."
The query did return rows. However, this is rather urgent and I am unsure as to when Oracle Support will get back to me. I made a Sev 2 SR for this. I was wondering if there was any front end things I could do to clear this payment batch so I could reissue a check?
Any help would be appreciated.
Thanks

Please see these docs.
R11i: SEPA: AFTER PATCH 6741280, QUICK PAYMENTS ERROR APP-SQLAP-10380 [ID 1060865.1]
App-Sqlap-10380 You cannot select this payment document payment batch formated [ID 309655.1]
APP-SQLAP-10380: You Cannot Select This Payment Document Because it is in Use by Another Payment Batch [ID 1335053.1]
R11i / R12: FAQ for Single European Payments (SEPA) [ID 791226.1]
APXPAWKB After Using NL Payment Format For Quick Payments, Payment Format Cannot Be Used Anymore [ID 250332.1]
Unable To Enter Quickcheck For Polish Eft Formats [ID 397791.1]
Thanks,
Hussein

Cannot release production order for a plant

Hi:
When I try to release a process order , I get this error message:
"CAnnot release production order for plant".
I get this message for a particular material in the plant. For other materials, it's working fine.
Please give your suggestions!
Gautham

Hi,
Check the Tasklist usage for your routing for that material.
For this usage ,check in op45 against the task list type whether until release indicator has been enabled.If so remove
and do the release.
or
check whether workcenter which is used for producing the material has been locked in work center itself.
Indicator: Usage only until release in orderIndicator used to specify for a task list usage and a task list type that an operation in the order cannot be released. This occurs when a work center group that is not intended for production is allocated to this operation.
When this type of operation in the order is released you must enter the work center where production should take place.
Regards,
nandha

Find flagged process orders for deletion

Hi all ,
How do i find flagged process orders for deletion ?
i need report or t-code

Hello,
Try with t-code COOISPI. In selection,Put material no and system status(sel. at header level) as DLFL
and also check "with deeltion flag indicator"
Check with result and revert.
Regards,

You cannot supply payment terms for your credit memo

Hi,
My req is as per below,
1) I would like to apply payment terms on credit memo screen throgu auto invoice creation.
When i tried to update ra_interface_lines_all.term_id then i got error message : You cannot supply payment terms for your credit memo
Can someone gudie me.How is it possible?
Thaks,
Raj
Edited by: RajPatel on Sep 23, 2009 8:33 AM

Hi octavio,
Thanks for your valuable input.
You are right and also I found from metalink...
Subject: 11.5-AR-How Can You Enter Payment Terms For Credit Memos
Doc ID: 249547.1 Type: HOWTO
Modified Date: 16-DEC-2003 Status: PUBLISHED
goal: How can you enter payment terms for Credit memos
fact: Oracle Receivables 11.5
fix:
Payment terms cannot be used in Credit memos. This is standard functionality.
The trx_date/gl_date of the credit memo transaction is the date which is
considered as the due date of the credit memos. This is the current
functionality.
Thanks,
Raj

Q30: Cannot find sales order for a committed stock item

I have a few item numbers which show committed stock in item master data/stock but I cannot find an open sales order or even with an open line on a closed sales order. I have tried various query reports without success.
Does anyone have a key to unlock this problem?
Thanks,
Robin

Hi,
Sorry but I am pretty new to SAP and on a learning curve so no idea what note 999124 is or even where/how I would use it.
Can you explain further please?
Robin
Lakshmipathi
Posts: 17,513
Registered: 8/9/07
Forum Points: 34,462
Solved problem (10)
Very helpful answer (6)
Helpful answer (2)
   Re: Q30: Cannot find sales order for a committed stock item
Posted: Jan 12, 2011 3:18 PM    in response to: Robin Bellion           Reply
Check Note 999124 - Incorrect committed\On order quantity when changing orders
thanks
G. Lakshmipathi

You Cannot select assembly order for deletion error with BAPI_SALESORDER_CAHNGE after EHP6 upgrade

Similar Messages

Maybe you are looking for