Error in updating R-tree index
Hi,
I want to update a geometry column with a R-tree index on it with a statement like:
update xxx set xxx.geometry = (select yyy.geometry...
All geometries in the updated table are NULL before. I get the following error:
ORA-29877: failed in the execution of the ODCIINDEXUPDATE routine
ORA-13237: internal error during R-tree concurrent updates: [empty-node
encountered; rebuild index]
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 7
ORA-06512: at "MDSYS.SDO_IDX", line 86
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 83
ORA-06512: at line 1
What's wrong?
Joerg
Joerg,
This is a known bug in R-tree indexing.
When you create an R-tree index
on a table with no geometries, it gives
this error.
This is fixed in 8.1.7.
To get around this problem, make sure
that atleast one geometry is non-null
when you create the index.
For a performance reason, it is not
recommended that you create
index on spatial table with NULL
geometries.
Updates on such indexed table will
be very expensive compared to
creating the index on a fully
populated table.
null
Similar Messages
-
ERROR BUILDING SPATIAL R-TREE INDEX
I tried building an R-tree index on a spatial table containing latitude/longitude points. There are only 9000 records in the table.
I get the following error:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13200: internal error [Unsupported Type] in spatial indexing.
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_9I", line 7
ORA-06512: at line 1
Can anyone help?MY ORACLE version number is 9.0.1.0.0
My table name is GEOM_FIX, the column that I tried to index is FIX_NAME VARCHAR2, where FIX_NAME is a unique identifier.
My spatial index create script is:
CREATE INDEX NDX_GEOM_FIX ON GEOM_FIX (FIX_NAME)
INDEXTYPE IS MDSYS.SPATIAL_INDEX -
Error in Update optimizer statistics - index is in unusable state
Hello,
we have this error in log Check and update optimizer statistics:
12.02.2009 23:21:20 'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPPB1"', TABNAME => '"/BIC/FZPPC0002"', ESTIMATE_PERCENT => 10, METHOD_OPT =
12.02.2009 23:21:20 ORA-20000: index "SAPPB1"."/BIC/FZPPC0002~010" or partition of such index is in unusable state
12.02.2009 23:21:20 ORA-06512: at "SYS.DBMS_STATS", line 13452
12.02.2009 23:21:20 ORA-06512: at "SYS.DBMS_STATS", line 13472
12.02.2009 23:21:20 ORA-06512: at line 1
12.02.2009 23:21:20 BR0886E Checking/collecting statistics failed for table SAPPB1./BIC/FZPPC0002
i can temporary fix this problem when i delete and recreate index via SE14, but this help only for one next running update statistics, every next running update statistics has same error: index "SAPPB1"."/BIC/FZPPC0002~010" or partition of such index is in unusable state. Exist any definitive solution for this problem. ThanksHi,
Two methods for checking/repairing Indexing issues
1)RSRV for a particular cube
2)SAP_INFOCUBE_INDEXES_REPAIR report
You can also use this sql to rebuild an Index.
alter index <index name> rebuild online; Or you can rebuild Index by using ABAP report 'RSANAORA'.
Please check below thread it may help you.
/message/6483705#6483705 [original link is broken]
https://forums.sdn.sap.com/click.jspa?searchID=12942068&messageID=2052264
Thanks,
Sushil -
Error in Updating ctxsys.context index using ctxsrv
Environment :
Linux 6.2,
Oracle 8.1.6
character set : zhs16gbk or zhs16cgb231280
I can create an ctxsys.context index(using CHINESE_VGRAM_LEXER) on a long column, and i can rebuild this index with no parameters.
When i want to rebuild this index automatic using ctxsrv, this error occur ---
DRG-50857 Oracle error in drtldml(dml)
Ora-2000 error
anybody can help me?
nullthe complete error:
Dml batch: cid=1023
End batch: return code is 1
DRG-50857: oracle error in drtldml(dml)
ORA_20000: interMedia text 4mNs
DRG-50857: oracle error in drsxsopen
ORA-01480: STR83V51dA?H1IY?U:sW:
null -
Urgent help needed : Error while creating r-tree index
Hi All:
When i try to create an rtree index on a multipolygon layer am getting the following error . Am using the following statement:
CREATE INDEX SYSTEM.TEST_IDX ON SYSTEM.TEST("GEOMETRY) INDEXTYPE IS MDSYS.SPATIAL_INDEX PARAMETERS ('SDO_INDX_DIMS=2')
java.sql.SQLException: ORA-29855: error occurred in the execution of ODCIINDEXCR
EATE routine
ORA-00600: internal error code, arguments: [kope2upic954], [], [], [], [], [], [
Best Regards
Debasish SahuHi,
There is something wrong with the data as you loaded it.
Can you try to validate the geometries?
Thanks,
d -
R-Tree Index v's Quadtree Index
Hi,
In the 8.1.7 spatial documentation it says that R-Tree index may not be a good choice for a geometry table that has heavy update activity.
Can anyone define and quantify what heavy update is?
ThanksThere hasn't been a formal analysis of R-tree update performance. Some things that are known:
The spatial index create statement includes a percent free specification that allows free space to remain in the R-tree to accomodate future inserts.
If the data doesn't need to be kept on-line all the time, then the R-tree index can be rebuilt.
The performance associated with both R-tree index updates and quadtree index updates is dependent on the data being inserted. Updating point data seems to be faster with quadtrees. Updating simple geometries also seems to be faster with quadtrees. There is a point though where tiling complicated geometries dominates the quadtree index update time, and at some point of complexity it becomes faster to update R-tree indexes.
If anyone has info to add here it would be quite useful.
Hope this helps,
dan -
TT0885: Invalid T-tree index
After running for several days, our TimesTen 6.0.4 returns errors: TT0885: Invalid T-tree index
What is wrong? How can we fix this?
The error was first encountered when monitoring a table size:
/opt/TimesTen/myapp/bin/ttSize -tbl mydb.users -connstr "dsn=myDB;uid=***;pwd=***"
Rows = 1787180
Table in-line row bytes = 178192657
Indexes:
Can't get info on index FIRST_INDX.MYDB: TT0885: Invalid T-tree index -- file "index.c", lineno 8243, procedure "sb_ixInfo ()"
Can't get info on index SECOND_INDX.MYDB: TT0885: Invalid T-tree index -- file "index.c", lineno 8243, procedure "sb_ixInfo ()"
T-tree index MYDB.UID_INDX adds 36313369 bytes
Can't get info on index USER_INDX.MYDB: TT0885: Invalid T-tree index -- file "index.c", lineno 8243, procedure "sb_ixInfo ()"
Total index bytes = 36313369
Total = 214506026Hi,
As I suspected. Using ttSize in this manner is not that useful since it does not measure./report on a tables actual space utilisation but rather it computes an 'estimated' utilisation based on the schema, indexes and rowcount. The calculations it use have to make certain assumptions about various things so the values returned may in some cases differ significantly from 'reality'. There is currently no exact way to determine the actual memory occupied by a specific table or index. However, there are accurate figures available about overall memory utiliation in the datastore. The SYS.MONITOR table includes fields such as PERM_ALLOCATED_SIZE, PERM_IN_USE_SIZE and PERM_IN_USE_HIGH_WATER plus equivalent fields for the TEMP region. Also, there is a useful built in procedure called ttBlockInfo.
I would strongly recommend that any routine space monitoring scheme be based on these rather than ttSize...
Chris -
Getting index error while updating table
Hi All,
I am getting error
SQL> UPDATE bqcustomer
2 SET
3 namelegal = 'SME ' || SubStr(bqcustomer.namelegal,8),
4 nameshort = 'SME ' || SubStr(bqcustomer.nameshort,8),
5 nametrading='SME ' || SubStr(bqcustomer.nametrading,8)
6 WHERE
7 hassmeaccount = 1
8 AND nametrading LIKE 'GLOBAL %' ;
UPDATE bqcustomer
ERROR at line 1:
ORA-08102: index key not found, obj# 60473, dba 46348301 (2)
any help on this will be appreciated .
Thanks in advance
Sachin SrivastavaORA-08102 INDEX KEY NO FOUND, OBJ# 25095, DBA 33567643 (2)
-
Dear team support,
I have a problem with my WhatsApp Messenger.
my whatsapp wont save message history. couse error.
Error: Sqlite Error (schema update):
net.rim.device.api.database.DatabaseException: SELECT name FROM sqlite_master WHERE type = 'index' AND name = 'chat_history_jid_index': disk I / O error (10).
Please advise me how can i solve my memory card issue..
Thanksls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change" -
I'm getting the following error when trying to create an r-tree index:
create index new_gps_idx on gis.new_gps (geometry) indextype is mdsys.spatial_index PARAMETERS('TABLESPACE=INDX')
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-06512: at line 1
I get the error regardless of which tablespace I specify.
I can however create fixed quad-tree indexes with the following command, in the same tablespace:
create index new_gps_idx on gis.new_gps (geometry) indextype is mdsys.spatial_index PARAMETERS('SDO_LEVEL=4');
The error is defined as:
ORA-29855 error occurred in the execution of ODCIINDEXCREATE routine
Cause: Failed to successfully execute the ODCIIndexCreate routine.
Action: Check to see if the routine has been coded correctly.
I have created one r-tree index on a large spatial table, 5633 geometries, in the INDX tablespace. I am not able to create another one.
The INDX tablespace is only 2% used and its size is 200MB.
Any help would be greatly appreciated.
Dave
nullHi David,
Can you try applying the patch (if you haven't already)? Unfortunately I can't rememeber the details of what the symptoms were, and although the patch kit describes a fix there is no corresponding bug in Oracle's bug database. If I remember correctly there was a bug in the values the r-tree code was using for intermediate (temporary) tables created during r-tree index creation.
Sorry I can't pin this down for you.
dan -
Error while updating account dim
I get the below error while updating the Outline Account Dim.This error occurs only when updating account dim. It does not happen with other dimensions. So it doesn't seem to be the connection being down. If we recycle the analytics server. But we are not able to find out the actual cause for this issue.
Error message:
Cannot build dimension. Analytic Server Error(1042017): Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again
Additional information
Account is defined as dense dimesion with 1800 level 0 members. We are updating this using rules file.
Potential Number of Data Blocks : 27762609853440
Number of Existing Data Blocks : 2625360
Index Cache: 40960
Data cache : 20480
I appreciate any help in resolving this issueThere is probably something in your dim build source file that Essbase doesn't like and isn't giving you a good error message. Did this dim build work in the past and you recently added something to it?
Try excluding certain columns like member properties and data storage just to see if you can get the members to load. Then slowly bring back in the other columns to see if you find the one that has the problem. Similarly try keeping all the columns but just try loading one record and see if it succeeds, this will help you start to narrow down if it is a load rule or source issue. Other option is to create a new load rule, perhaps there is something wrong with the one you are using.
Unfortunately there is no magic bullet here, you just have to work through small samples to try and isolate what the problem is. -
How do i update a tree display?
I've created a tree, which will only be used as a display for values, but i'm not sure how to correctly update the tree if a value is changed.
I just want to update the text for the changed node, and display the new view of the tree.
Does anyone know a staight forward approach to doing this?
Thanks in Advance!Apple - Support - iPod - Repair pricing
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
How do I get my iPod serviced?
Easy! If your iPod is still covered by Apple's Limited Warranty for iPod, we recommend you use theOnline Service Assistant. You may also contact Apple Technical Support, or take your iPod to your local Apple Retail Store to make service arrangements.
Attention iPod shuffle customers: Service for iPod shuffle is performed by means of an express replacement program, via Online Service Assistant or Apple Technical Support. For more details, please review the Express Replacement Service tab on the left. -
Error to update Grid Control 10.2.0.3 for 10.2.0.5
Hi i'm receve this error to update gril control in new repository . first im install new database 11.1.0.7 and create a news database(install OMS together) . after i'm update install of grid control. i'm install a version 10.2.0.3 and make upgrade OMS for 10.2.0.5. In install agent i receve error in java.
silentInstall2009-06-19_06-02-37AM.log
Error finding file /u01/app/oracle/agent10g/sysman/config/emoms.properties
Error finding file /u01/app/oracle/agent10g/sysman/config/emoms.properties
String index out of range: -10
An error occured while trying to execute command.
The file /u01/app/oracle/agent10g/config/ias.properties cannot be found while looking for variable InfrastructureUse.
At this time, the Oracle Application Server middle-tier will be shut down. There may be a brief pause in the installation while the middle-tier processes are stopped.
"An error occured while trying to execute command."
File not found: /u01/app/oracle/agent10g/Apache/modplsql/conf/dads.conf
File not found: /u01/app/oracle/agent10g/Apache/modplsql/conf/cache.conf
A runtime exception occurred during the execution of this action.
A runtime exception occurred during the execution of this action.
This silent installation was unsuccessful.Yes this is what I do, but still receive "Insufficient privileges to write to that location". So I am forced to use normal file system to be able to continue.
After that I run into the current problem saying OMS configuration failed (see details....) and I try:
./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=uxlpgrid01:6200
3 of 5 processes started.
ias-instance id=EnterpriseManager0.uxlpgrid01
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_island
Error
--> Process (pid=0)
no port available from the port range
failed to start a managed process after the maximum retry limit
no port available from the port range
no port available from the port range
Log:
none
ias-component/process-type/process-set:
OC4J/OC4J_EMPROV/default_island
Error
--> Process (pid=0)
no port available from the port range
failed to start a managed process after the maximum retry limit
no port available from the port range
no port available from the port range
Log:
none
Then:
./opmnctl status
Processes in Instance: EnterpriseManager0.uxlpgrid01
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 23861 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 27021 | Alive
OC4J | home | N/A | Down
OC4J | OC4J_EM | 10403 | Alive
OC4J | OC4J_EMPROV | N/A | Down
WebCache | WebCache | 23872 | Alive
WebCache | WebCacheAdmin | 23863 | Alive
Overwhelming :-(
Thanks for helping
Askia. -
[SOLVED] Error during update of LUKS header on device ./file
dd if=/dev/zero of=./file bs=1M count=200
cryptsetup luksFormat -s 512 -c aes-xts-plain64 -h sha512 ./file
WARNING!
========
This will overwrite data on ./file irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
Error during update of LUKS header on device ./file.
This only happens on my 1TB HDD (GPT, xfs filesystem). I have 2 SSDs that do not throw the error.
I tested using a flash drive formatted as GPT and using xfs filesystem and it worked.
Ideas?
Last edited by not_sure (2013-03-01 02:50:32)Hmm... I didn't know you could do that. Are you sure it can? https://wiki.archlinux.org/index.php/Di … ison_table
I thought dm-crypt basically did block level encryption.
I guess this is a "virtual partition"? Maybe https://www.linux.com/community/blogs/1 … nux/280174 helps? It seems to mount it as loopback prior to encryption?
Last edited by cfr (2013-03-01 01:07:16) -
Hi,
I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
"Maximum Number of Result Blocks has been reached"
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
The data updation stops after the row count 49900.
Please help to resolve this error .
Thanks in advance.
Regards,
LathikaHi,
in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
This may help searching the web.
Greetz,
GOI
Maybe you are looking for
-
How to change heading text for parameter field of type date
Hi, After creating a parameter field with the type " Date Time" when I open the report for entering the parameter then it displays the given parameter with the following text: " Please enter Date in format "yyyy-mm-dd". " I want to change it to
-
How do I enlarge the text size and incease the resolution
I just switched to a new computer and suddenly the text on and off line is in tiny letters I can barely read. How do i enlarge it to its former size and also restore its former resolution?
-
Firefox is simply unresponsive when I try to save a page as a bookmark, I have tried clicking the star in the URL bar, using ctrl-D, right clicking on the page, and saving from the bookmarks tab. None of these options do anything at all. I have tried
-
Mountain lion "messages" freezing computer
downloaded mountain lion the other day. and just recently started using messages. and when i recieve a message and go to click on the messages icon on my dock sometimes it will freeze my computer. it happens 1-2 times a day. it never did this before
-
Edge Animate playing all symbols on replay?
Hi, I am at my wits' end here--I've created a basic animation using Edge Animate CC 2014.0.1, featuring groups of symbols which have a stop trigger at the beginning of the animation and are then played at the appropriate time. It works fine--the firs