Error in URL link for approvers in email notifications - GRC 10

Hi All,
After scheduling the PC - CCM jobs , all the approvers got the email notfication with the link to work inbox.
when approvers clicked work inbox , they are getting error message.
Kindly help on getting the steps to check for areas we need make sure , why link is not working and how to solve.
And what is the reason for this error?
Service cannot be reached
What has happened?
URL call was terminated because the corresponding service is not available.
Note
The termination occurred in system with error code 404 and for the reason Not found.
What can I do?
Please select a valid URL.
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Regards
Prasanna S

Hello,
Activate the relevant services in t code SICF
check the below Note for technical process
2145019 - Error - Service Cannot be reached
1697673 - GRC 10.0 - Service cannot be reached
Also check the below thread for similar issue
SICF service - error code 404
Regards
Baithi

Similar Messages

URL links for Workflow Approval Email per user & others

Hi all, we have upgraded to SRM7 and understand that we have to switch to using program /SAPSRM/OFFLINEAPPROVALSEND to generate the workflow notification emails. We have maintained the portal information in the SRM configuration to build the link. However, we have 2 issues here
1. We currently output collective email so emails are sent out at specific timing on a per user rather than per work item basis. The URL link does not seem to work in this case (for shopping cart approval example) and we get an object GUID error. The URL looks something like this
http://sap-ped.dev.xyz.com/irj/portal/?navigationtarget=obn://BOSystemAlias=SAP_SRM/BOTechnicalName=sc/Operation=detailprof&NavMode=3
Also, even if I run the program for a PO approval example, the BOTechnicalName is still pointing to sc.
However, if I do it on a per work item basis, the URL works.
Does anyone know where the control this setting?
2. External and internal portal
We have some users connecting to the portal through more secured channel (external portal). In this case, I couldn't find a way to generate the appropriate URL for the external. In the past in the older SRM version, the program was using the attribute ITS_DEST in PPOPMA_BBP to build the URL link. Now, I do not know how the system knows which portal URL to take if the control is no longer at user level.
Has anyone ever had this requirement before?
My worse case scenario to resolve the above issues would be to use the BADI to alter the content of the email notification. The purpose of posting this message here is to ensure that I am not missing out any standard SAP functionality which could meet our requirements.
Cheers!
SF

Hello,
See hyper-links below:
[How-To: Offline approval - Logon link does not work|http://wiki.sdn.sap.com/wiki/display/SRM/Offlineapproval-Logonlinkdoesnot+work]
[KBA 1511180 - The hyperlink in the offline approval email is incorrect|https://service.sap.com/sap/support/notes/1511180]
Regards.
Laurent.

How to create an URL link for product cancellation using an FM

Hi,
I have tried creating an external attachment i.e URL link for a workorder by triggering a custom FM by exporting business object type , order id ,realtion type , title and link with return parameter as a message .
But i'm not being able to create URL link for workorder using the custom FM.
Kindly please suggest some solutions regarding how the URL link can be created using an FM instead of manual creation.

given that there can be a variety of reasons for something to crash, you can sometimes initialize a buffer by wiring a non-null data structure to the left terminal of the call library function node. for example, if the output is to be a string no more than 100 characters long, create a string that long of nulls, blanks or anything and attach that to the left terminal for that output. no guarantees, but i have seen that work.
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

Workflow Notification: URL Link for executing a RDF

I need to send a notification with the URL link When the user clicks this link it should call a report and fetch the details in PDF file according to the parameters passed in the URL I tried using http://local_host_name/reports/rwservlet?report='RDF_FIle_Path'/URLREPORT.rdf&desformat=pdf&destype=cache&userid=apps/password@xxx 
But it is giving the error like The requested URL /reports/rwservlet was not found on this server. Note: I have loaded the RDF into server

Hi Amit,
The link for cProjects can be found under the service in SICF>default_host>SAP>BC>Webdynpro>SAP>cProjects.
For portal URL, you need to search under the business package>role>iviews or pages.
Regards,
Santosh.

How to create URL link for telephone number ,open to account search page and account result page ?

Hi Experts,
Bussines role - ZCC_ICAGENT
If user open this bussiness role and open Account page ,user enter telephone number and enter search account ,then result will be displayed.Instead of 3 clicks ,user click direct URL link ,telephone number is parameter,account Search and account result page will be opened direct link.
So how to do it..could you please provide me step by step...what are the steps wee need to follow for creating URL ..how to do it..Please help..
Thanks
Kalpana

Hi kalpana,
You dont need to do any setting for this.
Following URL will be used as per your requirement.
http://rrnewcrm.ril.com:8000/sap(bD1lbiZjPTI0MiZkPW1pbg==)/bc/bsp/sap/crm_ui_start/default.htm
?sap-system-login-basic_auth=X&sap-system-login=onSessionQuery&saprole=ZCC_ICAGENT&
sap-phoneno=9999999999
Here parameter sap-phoneno will contain the number you want to search for.
In component ICCMP_BP_SEARCH, go to view BuPaSearchB2B. write below code in its inbound plug IP_INBOUNDPLUG-
DATA: lt_ivr_url_param TYPE tihttpnvp,
         ls_ivr_url_param TYPE ihttpnvp,
         lr_searchcustomer TYPE REF TO if_bol_bo_property_access,
         ls_searchcustomer TYPE crmt_bupa_il_header_search.
CALL METHOD cl_crm_ui_session_manager=>get_initial_form_fields
       CHANGING
         cv_fields = lt_ivr_url_param.
lr_searchcustomer ?= me->typed_context->searchcustomer->collection_wrapper->get_current( ).
     CHECK lr_searchcustomer IS BOUND.
READ TABLE lt_ivr_url_param INTO ls_ivr_url_param WITH KEY name = 'sap-phoneno'.
IF ls_ivr_url_param-value IS NOT INITIAL.
         ls_searchcustomer-telephone = ls_ivr_url_param-value.
   CALL METHOD lr_searchcustomer->set_properties( EXPORTING is_attributes = ls_searchcustomer ).
         eh_onsearch( ).
    ENDIF.
Thanks & Regards
Richa

FM for fetching file type by providing the URL link for file.

Hi All,
We have a requirement to fetching file type of image viz .jpg,.bmp,.tiff by providing the URL link to image.
For example
http://AttachmentWebsite/AttachmentWebsite.aspx?Num=ATT-F19220090818095048&Ext=.JPG&RC=N
Is there any FM to fetch file type from link.
regards,
Nitin
Edited by: Nitin Sikka on Aug 20, 2009 8:35 AM

diff URLs. but if they contain the pattern "EXT*=.<extn name>" then the above code will work
else you have to search for all formats.
data:res type MATCH_RESULT,
DATA : s1 type string VALUE 'http://go2ntlweb14/AttachmentWebsite/AttachmentWebsite.aspx?Num=ATT-F19220090818095048&Ext*=.JPG*&RC=N '.
FIND first OCCURRENCE OF REGEX '.(JPG|TIFF|PNG|JPEG|BMP)' in s1 RESULTS res.
if sy-subrc is INITIAL.
SHIFT s1 by res-offset PLACES.
endif.
WRITE : s1+0(4).

Url link for download on LMS from Common services

Hello, i would like to reported a major thing that appeared on 3-4 customers.
The download action is not never possible when they try it from the LMS portal/Common Services/Software update.
The url loaded on browser Internet(eg IE 7.0) add the character | on the link when it proceed after the authentication on the CISCO.COM web site.
The worst is that when i did it from my lab's machine,it works fine even the bad entries. We have traced it with a sniffer.
From an IE directly (outside the LMS so), the page is not displayed as she is not matched with W3C recomendations.
A Doctype tag is not a DTD XHTML 1.0 one.
Hereafter , the URL:
http://www.cisco.com/cgi-bin/Software/WLAN/cwselectfile.cgi?bp=1&&SEARCH=nmim||1.6.0||Software%20Packages|||&FORMAT=XML
On the other side, when a proxy is installed on this machine , it has been refused as well, as the proxy controls that.
Thanks by advance.Richard.

The caracters | are not allowed by the XML validator.
The url link has been finished when he meet this kind caracters.
So it means , that , maybe it has been inserted for stopping the entries, when a bad username has been typed.

Dynamic url link for Crystal Reports Enterprise?

Hi all,
We recently upgraded to SBOP 4.0 SP2 and are looking at migrating our existing Crystal Reports from Crystal Reports 2011 to Crystal Reports for Enterprise 4.0.
Up to this point we have been utilizing the BW Publisher and role menus in BW.
Our long term goal is to migrate users from the BW GUI to the BI LaunchPad but this will be a gradual process.
Until we make the final switch to the LaunchPad we need to maintain the links in the role menus. I found the Document Link option for Crystal Reports so I have a URL to point to the report that we can put in the role menu, but the system value is not dynamic. Is there a way to make this dynamic like we can do with web template URLs?
For example, when using a web template URL we can use the <bsp_server> parameter in the URL to determine the SAP system. Is there an equivalent that can be used in the Document Link for the Crystal Report to determine the respective SBOP system?
Thanks.
-Brian

Hi,
Below is link for the Crystal report for Eclipse 2.0:
[http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp|http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp]
you could always refer to the following thread as Bryan updated with new releases :
[Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!|Crystal Reports for Eclipse 2.0 Release Update 8 is Now Available!;
Hope this will help
Regards,
Rameez Shaikh

Windows error when running link for other application

When FF is not running and I click on a link in another application there is a error reported but FF loads and goes to the link. Example Outlook email link results in a Windows General failure error message.
Run Windows 7 sp1

Are you trying to run the app from a Command Prompt or fro Text Pad?
The error occurs when java can not find the class you tried to run. It is very likely a Classpath problem. It may work from the Command Prompt from the directory where the NumberConvert.class is located, enter "java -classpath . NumberConvert"

I want to turn my video on my Mac into a URL link to share via email

Just trying to share one of my videos via email. Would like to turn it into a URL link and send it,

Hi, there are several things needed before that would work, your outside IP & maybe Port Forwarding if more than on computer is on your Modem.
You can find your outside IP here... what's my ip...
http://www.whatsmyip.org/
Then you'd need to setup file sharing & likely want the video in your Shared folder.
Putting it on YouTube or some other video sharing site may be easier.

Help URL link for 3 languages

Hi All
I know that in default framework page of masthead we have property to give custom URL link. My portal is implemented in 3 languages. SO if I want to see help in other than english what should I do??
Any help will be appreciated
Thanks

I would suggest you give 3 links for 3 files on one main page and give that main page as your help link so he has the option to choose.
If this is not OK for you, then I'll suggest some customization.

Can't open CUP link directly from email notification ( GRC 5.3 )

Hi Everybody,
I am working for a client where GRC 5.3 is installed.
When we submit a user request in CUP , a link is automatically generated in a mail and send to the manager/ approver based on the workflow. But the problem is that client is not able to open the link directly from the mail. They need to open it everytime manually through browser. This happens in Dev system only. Where as in Prd system they do not face any issue. They can directly open link from mail automatically send from CUP.
Can someone guide where is the problem in terms of setting because Dev and Prd is behaving different way.We are unable to find exact location where we need to make change in Dev grc. Please help.
Regards,
Kakali

Hi Kakali,
You must have different configuration Dev and Prd. Can you check the application and redirection URL link under SMTP server link? I think the problem resides there as CUP uses those links in the email.
Regards,
Alpesh

Exchange console is Madatory for FIM SSPR email notification

Hi,
We are trying to trigger a mail once user reset his successfully. would like to confirm, is it Mandatory to install the exchange console on FIM server only for email notification in case of successful password reset and OTP on email.
If exchange console is mandatory to be installed on FIM server, How does FIM interacts with exchange console to trigger a email?
Thanks
Harry

Hello Harry,
Note that it is not required to install the Exchange management console on FIM in order to send notification emails. You should be able to send emails from within your workflow activity by purely editing it and adding a "notification" activity. (Assuming
your FIM instance is configured correctly).
The only reason for ever installing the Exchange Console on a FIM server was related to Exchange 2007 provisioning within older versions of FIM.
HTH
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

Need to fixed solution for multipale path for single request email notification

Hello All,
I observed the some time GRC request have multiple path (Example 2.1 and 6.1). but in my landscape if one of the path completed email will sent to user and requester. but that should not correct.
Once request completed (Path1 , Path2 ..etc) than email notification will tigger.
If any one can help me about this settings.
Please let me know if you need more details..
My enviroment details\
Verson - GRC 5.3

I have not used 5.3 for a long time, but is there an option to set the provisioning at the end of the Request rather than a path and then send an email at the end of the whole request? I know this is all doable on 10.0 by setting the provisioning settings in the configuration and setting up the Global notifications in the workflow config.

Error in URL link for approvers in email notifications - GRC 10

Similar Messages

Maybe you are looking for