Error in VA01 - Kindly leave the field sales office blank
Hi all,
We have a program which creates sales orders. But on and off we are getting an error message saying "Kindly leave the field sales office blank" and sales order is not getting created. As we could not replicate the same in quality to test. Can anybody suggest why this error message occurs.
Warm Regards,
Sri
Hi Sri
First of all check in XD02 wheather you have maintained any sales office feild or not. If you have maintained then check in the enterprise structure wheather you have done any assignments in the step sales office to sales area or not
Regards
Srinath
Similar Messages
-
How can I use the field "Sales Order" on derivation?
Dear All.
This is about PA characteristic derivation.
I want to change the characteristic value "Sales Order (KAUFN)" by derivation.
But I cannot select the characteristic field on target field.
The field "Sales order(KAUFN)" doesn't exist there.
Why? How can I use the field "Sales Order" on derivation?
Y.C.BaeHi Bae,
in order to be able to choose fields KAUFN (for sales order) and KDPOS
(for sales order item) as target fields of derivation step 'enhancement'
you have to modify the coding of subroutine EXIT GET_ALLOWED_TARGETS
in program RKEDRCOPA like this:
NAME-IDENTIFIER = 'CO-PA'.
NAME-TABNAME = FIELDTAB_ENTRY-TABNAME.
NAME-FIELDNAME = FIELDTAB_ENTRY-FIELDNAME.
IF FIELDTAB_ENTRY-USGFL CA 'DUV'
BEGIN OF INSERTION *****
OR FIELDTAB_ENTRY-FIELDNAME = 'KAUFN'
OR FIELDTAB_ENTRY-FIELDNAME = 'KDPOS'
END OF INSERTION *****
OR FIELDTAB_ENTRY-FIELDNAME = 'KNDNR'
OR FIELDTAB_ENTRY-FIELDNAME = 'ARTNR'
Actually sales order number and sales order item shouldn't be changed
by derivation (therefore they are no valid target fields in standard)
but if you need to fill them within an enhancement this modification
will help you to define them as valid target fields. But this is just
the technical frame so far; the logic from which table you'd like to
derive the sales order number correctly depends on your implementation
of the enhancement! I just want to ask you to be rather careful with
the implementation of the exit so that the sales order number isn't
changed in cases that shouldn't be concerned.
Regards,
Abhisek -
Error in migrating SharePoint 2010 list fields to Office 365 list [CSOM]
Hi,
I am trying to migrate a SharePoint 2010 list to Office 365. I created a new ListCreationInfo for a new list in O365. But when i am to trying add fields from SP2010 list, its giving me an error after list.update() -
A duplicate field name "fa564e0f-0c70-4ab9-b863-0177e6ddd247" was found.
if (!l.Hidden)
ListCreationInformation creationInfo = new ListCreationInformation();
creationInfo.Title = l.Title;
creationInfo.TemplateType = l.BaseTemplate;
List list = web.Lists.Add(creationInfo);
//Fields in the list
ctxOnPrem.Load(l.Fields);
ctxOnPrem.ExecuteQuery();
foreach (Field f in l.Fields)
list.Fields.AddFieldAsXml(f.SchemaXml, true, AddFieldOptions.DefaultValue); list.Update();
Note- l is the SharePoint 2010 List.Answer given on StackExchange -
http://sharepoint.stackexchange.com/questions/128875/error-in-migrating-sharepoint-2010-list-fields-to-office-365-list-csom/129015#129015
Thanks,
Thomas -
Tabs smartform don't work when the field content is blank
Hi,
I'm doing a report with smartform, I created a paragraph with 4 tabs, when the field content is blank the next field don't stop in the right tab. Anybody know why ??
Thanks.
Suzuki - Brasilsee example prgram sf*
Here is the step by step procedure
http://sap.niraj.tripod.com/id67.html
Procedure:
1. Create a new smartform
Transaction code SMARTFORMS
Create new smartforms call ZTEST
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. To define the table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collect all the table data in your program, and pass once to SMARTFORMS
In SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZTEST'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html -
How to find if item's value has changed without leaving the field
i am using timer in this one appilcation , where i am letting the user define the time in minutes like (30) ..Is there any way to know after they change the value of that item lets say to 40 so that i can execute some other statements.
i have tried post-change and post text item ...
thanks.You could use a timer, and then in the When-timer-expires (WTE) trigger, try Validate(Item_Scope). Try that, and see if it will cause the when-validate-item trigger to run.
If that does not work, then in the WTE trigger, move the cursor out of the item. THAT will definitely cause the WVI to run if they have made a change. However, moving the cursor back into the field may cause problems with cursor position and also with the contents of the item selected (highlighted). -
ERROR: IN FK02 TRANSACTION ALTER THE FIELD CHANGE REGION
In FK02 Transaction when I try to alter the field REGION, the field taxjurcode does not change, so the messsage is showed "The code of residence xxx does not match the address entered".
Somebody knows what do I have to do?In FK02 Transaction when I try to alter the field REGION, the field taxjurcode does not change, so the messsage is showed "The code of residence xxx does not match the address entered".
Somebody knows what do I have to do? -
Adding field sales office in xd01
Hi experts,
As I am opening new company so for thati want to give option for sales office on XD01 XK01
so please tell me the way i can give this field on required screen
thanks
babbalHi Babbal,
Please see the following BADI's
CUSTOMER_ADD_DATA Additional Data at Customers
CUSTOMER_ADD_DATA_BI Additional Data at Customers (Batch Input and ALE)
CUSTOMER_ADD_DATA_CS Additional Data at Customers (Subscreen Container 4000)
Thanks,
Aravind -
Enhacement Territory management with field Sales Office
Hi,
If i want to assign attribute for "sales office" to territory management. Which field and data element I need to use for modifiy table "CRMM_TERRATRIB". Do I need a "BAdI: Implement Business Logic for Additional Attributes"?
Thanks in advance.
LydaPlant and Sales Office Fields are not Present in Output Communication Structure KOMKBV3 / KOMPBV3.
Your observation is correct. In standard SAP System for Application V3, Sales Office and Plant are not part of standard field catelog.
If you observe Plant & Sales Office are item & header related data, respectively. Therefore, Plant and Sales Office should ideally appended to structure KOMPBV3 & KOMKBV3. Then write require logic in userexit to fetch values for Plant & Sales Office in USEREXIT_KOMPBV3_FILL in include RVCOMFZ1 and USEREXIT_KOMKBV3_FILL in include RVCOMFZZ, respectively.
Further instead of appending fields catalog with std fields WERKS and VKBUR for plant and Sales Office, try with Z fields like ZZWERKS and ZZVKBUR, for Plant and Sales Office, respectively.
For your reference/understanding, you can refer following SAP Help link: New Fields For Output Control
Thanks, JP -
my phone has just gone dead need to revive my phone, someone calling me can hear the dailer tone but i am not able to hear any ring, kindly suggest. the monitor is all blank
Thank you so much you really hepled, my phone is working again phew!!!
-
Help required: how to makes sales office field mandatory, in inquiry and qu
I want to make the field sales office as mandatory , in Inquiry and quotation, please guide me how i can do it.
hi
if so then u do one thing.. enter the Tcode and then in variant name .. keep the field empty and search for Transaction variant by giving only the tcode.VA11
if u find any transaction variants for Va11 then u can use that or else serach with VA01 and c how many Transaction Variants u r getting.. to my guess u must only be getting BUS2030..
if that is the case u have to create new transaction variant for va11 and then proceed the process
=====================
GOT THE SOLUTION
=====================
SHD0 > enter tcode VA11 > F5 > Give the Enquiry type (IN) > give the details sales org, dist chnl, div, > Press Enter > will get the fields with options..
Same in the case of VA21 .. giving sales org , dist chnl, div is not compulsary.. just give the document type and can proceed..
Reward if USeful
Thanx.. Naren.. -
How to include Sales Office and Sales Group into FI report?
Hi,
I have a requirement to add Customer characteristics u201CSales Groupu201D and u201CSales Officeu201D into a FI report which is based on the InfoCube 0COOM_C02. The values that needs to be presented is actual data (Customer Master Data; NOT transactional value.
In the DataSource u201C0COORDER_ATTRu201D, fields Sales Organization and Sales Group are present and it is brought to BW from R3. But I am not able to find the way to get the field Sales Office into SAP BW.
I checked the extraction program for the DataSource u201C0COORDER_ATTRu201D, the fields Sales Org and Sales Group are coming from a table u201CCE41000u201D but in this particular table there is no Sales Office present.
So can anyone guide me out in getting the Sales Office to the DataSource u201C0COORDER_ATTRu201D, or is there any way of getting it in BW directly by reading some Master Data table.
Thanks in advance
PrasapbiHi Sangeeta,
As per your statement, my understanding is that the Organization Attributes are not maintained in the Customization. If all the values are properly maintained then based on the Organization Data determination, the system would have picked up the data. You can first check the Organization Structure and see all the attributes are properly maintained or not and then check whether the Object Permitted in determination checkbox is checked. Then create a Transaction and see that all the Organization data are getting filled properly.
Have a look at the following link for a complete guide to the Organization data determination customization.
http://help.sap.com/saphelp_crm70/helpdata/en/6d/5c1738453fde16e10000009b38f8cf/frameset.htm
If the Organization data customization is not meeting your requirements then you can have a second look at the development approach. Then we can have a look at the available Objects to get the desired functionality.
Hope this helps.
Thanks,
Samantak. -
Copy control for sale office in delivery
Hi,
In our delivery note the field sale office is blank... we need that this field will be filled by copy control or user exit from document sale (order sale)... always the deliveries are for the same sales office.
Any clues for achiving this?
Best Regards
JuanHi
As mentioned in the above answer, please follow the following steps.
1. Got VOFM - > Data Transfer -> Deliveries.
2. Copy Routine 1 to 601.
3. Go in the code of routine 601 and add the following line.
MOVE CVBAK-VKBUR TO LIKP-VKBUR.
4. Activate the routine.
5. Go to copy control for deliveries Tcode - VTLA.
6. Select the necessary combination of order type and delivery type.
7. change the assignment of routine for header data to 601 and save.
you shud be abe to achieve the desired result.
Regards
Yatin -
Hi,
There is possibility of including the field sales office of SD as a field source in the FMDERIVE?
Thanks,
AdrianaHi,
Did you try BADI_FMDERIVE?
Re: FM- Cut Over Activities
Regards,
Eli -
How to make Sales Office field mandatory in VA01 initial screen?
Hi,
How to make Sales Office field mandatory in VA01 initial screen? I mean in the first screen where we enter the document type and the sales area?
Regards,
AjitDear Deepak,
Thanks for the clarification.
But, as far, I have understood the query - it is very simple and that is..
Whenever one creates a Sales Order (T.Code: VA01), Parameter: Sales Office needs to be mandatory (for all Sales Order, irrespective of Customer Account).
Until-unless, user won't enter the parameter: Sales Office, System will not lead to next page (now, here we need to enter Customer/ material etc...).
I have answered the query, in this regards, only.
Best Regards,
Amit.
Note: Pls. correct me, if I am wrong. Thanks for everyones guidance. -
Error while creating a delivery from a sales order
Hi Folks,
when i try to create delivery of a sales order, i am getting following error:
" Item 000030: delivery split due to conflicting header data (FKARV: ZF2C <-> F8) "
please help me in correcting this error.
thanks in advance.Hi,
The field FKARV is for Proposed billing type for a delivery-related billing doc.
Now here in your case billing document if ZF2C and another is F8 so it is splitting, check this
Kapil
Maybe you are looking for
-
My phone number appears in my daughters list of acceptable numbers to receive texts or messages on her iTouch. I sync her iTouch on my iTunes account. Do I need to create a separate iTunes account for her to prevent this from happening? or can i use
-
Setting Canvas Background Color issue
For some reason I cannot set a color for my canvas background. I have tried using setStyle('backgroundColor', colorNumber); in actionscript and setting directly in the mxml with no success. It only takes the value that is set in the design mode of Fl
-
Hr forms ..global definetion is unknown
hi, we moved a hr forms ..from one system to new system..but under global definetion.. we are getting errors saying Global Definitions Type "/1PYXXFO/ZUSPY_CS0_PSLIP0___K0026" is unknown how define that structure...in hrforms...i know the structu
-
Workforce planning in Projects
What are the different ways of assigning people to Work Centers? My target is to get a worklist for CAT2 transaction from project internal activities. 1. I can assign people to Work Centers in workforce planning? 2. I can assign people to Work Center
-
TS3999 how to turn on invites in ical
I currently do not have the option to invite people to events created in ical on my iphone 5. any suggestions?