Error in w.tax while posting entry in f-53

Hi All,
When i'm trying to post payment to vendor in f-53 i got the following error when i selected the line item among the displayed items
" With holding tax key missing one of following entry.
Please help me out as i need to solve this on urgent basis
Regards
Reddy

Hello friend '
Please follow the steps,
1. spro-fin. acc new - Fin a/c global settings(new)-withholding tax-extended withholding tax-calculation-withholding tax code-define withholding tax code.
2. select your w.tax type and w.tax code .
3. double click the selection.
4. Check whether you have entered the w.tax key in the field "Off. W.Tax key."
Regards
Pradeep Vasu

Similar Messages

Error 'Specify account number' while posting a parked document through FBV0

Hi,
I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

Hi,
Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
Try same scenario in the development its be useful
Regards,

Getting error msg while posting entry in GL using F-02

Hi gurus,
While i am posting entry in GL using F-02 getting error message as "no controlling area has been assigned to company code"
can any help me out at the stage i dint want to configure co settings is there any way to pass the entries
Thanks & regards
Nandini

Hi Nandini,
Have you defined a GL account as a cost element? I think you have multiple company codes which are using same chart of accounts and this company code is also using the same chart of accounts. And also you have configured single controlling area for all company codes. Even though you have not assigned this company code to controlling area. The cost elements will create at controlling area level.
Due to this system is throwing error message.
Please check and let us know if you have other issue.
Regards,
Mukthar

Getting Error Code as -5002 while posting A/R Invoice as Draft using C#

In the following code we are getting an error while posting the invoice as an draft. Can any one help ?
            com.Server = ConfigurationManager.AppSettings["Server"];
            com.CompanyDB = ConfigurationManager.AppSettings["CompanyDB"];
            com.DbUserName = ConfigurationManager.AppSettings["DBUsername"];
            com.DbPassword = ConfigurationManager.AppSettings["DBPassword"];
            com.UserName = ConfigurationManager.AppSettings["Username"];
            com.Password = ConfigurationManager.AppSettings["Password"];
            com.UseTrusted = true;
          long RetCode = com.Connect();
            Documents sapDoc;
            sapDoc = (SAPbobsCOM.Documents)(com.GetBusinessObject(BoObjectTypes.oDrafts ));
            sapDoc.DocObjectCode = BoObjectTypes.oInvoices;
            sapDoc.DocDueDate = dDueDate.Value;
            sapDoc.CardCode = txtCustomerCode.Text.Trim();
            sapDoc.HandWritten = BoYesNoEnum.tNO;
            sapDoc.DocTotal = Convert.ToDouble(txtTotalbeforeDiscount.Text.Trim());
            for (int i = 0; i < dgInvoice.Rows.Count - 1; i++)
                //sapDoc.Lines.LineNum = i;
                sapDoc.Lines.ItemCode = dgInvoice.Rows<i>.Cells[1].Value.ToString().Trim();
                sapDoc.Lines.Quantity = Convert.ToDouble(dgInvoice.Rows<i>.Cells[2].Value.ToString().Trim());
                sapDoc.Lines.Expenses.ExpenseCode = 4;
                sapDoc.Expenses.LineTotal = sapDoc.Lines.Quantity * 1500;
                sapDoc.Lines.Add();
                MessageBox.Show(sapDoc.Lines.LineNum.ToString ());
            long j = sapDoc.Add();
            if (j == 0)
                MessageBox.Show("Added to SAP Business One as Draft!");
I'm getting an error code as -5002 and its not getting stored as an draft. This was done based on SDK Example given in the help document. Can any body throw light on the same.
Edited by: Sadanand Manda on Nov 24, 2008 11:45 AM
Edited by: Sadanand Manda on Nov 24, 2008 11:46 AM

SAP Note Number: 1179405
Error -5002 when trying to copy a document with Sales BOM
In order to create the delivery via the DI, you need to set the oDoc.Lines.BaseLine value to the LineNum value from the RDR1 table (in the above example you should enter the value 2).
we set oDoc.Lines.BaseLine=0 before starting the lines loop. This has resolved the issue.
This note was really helpful and it was found in another query.
You can also refer to this. https://forums.sdn.sap.com/click.jspa?searchID=19070513&messageID=6178079
Thanks.
Edited by: Sadanand Manda on Nov 24, 2008 12:16 PM

Error 'Enter GL Account' while posting and invoice line item in MIRO

Hello Gurus,
I am facing a rather wierd issue.
While posting a PO invoice in Tcode MIRO, its asking to enter the GL account in line items. Everytime I am entering the GL account and pressing the enter key, it wipes off the GL account clean and gives the same error 'Enter GL account'.
It seems like this error is happening at the very first line item of the invoice. System is able to accept the GL account in 2,3,4th lines. If I delete the first line item, whatever is the first line item in that screen adapts the issue.
Any help would be great as I have no clue what to do.
Thanks

Hello Priyadarshini,
could you inform the error message number and it complete long text?
Regards,
Mateus Grings

Error in document number while posting the material

Dear experts
while posting the stock MB1C for the material the error is " incorrect doc number $ 1 .select doc number between 800000100 and 800000199.
how to correct this error. where to check this number ranges of document.
Thanks & Regards.
Erfan.

Hi
The document type, which is integrated for Material related posting is appears to be configured as "External Document Number Ranges". In the event of external number ranges, MM transaction tries to post same document number individually at MM system and propose same number in FI for Accounting Posting. If the proposed number is not within document number ranges, then you would expect this kind of errors.
What you need to do is:
1. See the document type, which is being posted and set correct number ranges as per MM transaction document type number ranges or
2. change MM transaction number rages in order to FI document number rages
Hope this helps

Error message type M7093-While posting to Cost center

Hi All,
While posting the material to cost center in MB21 201 movement i am getting the following error message :
Fld selectn for mvmt type / acct (G/L accnt no) differs for Business Area
Message No M7093
Please help me.
I am not able to post this document.
Regards,
Nagaraj S

Hi
Check the field status group assigned to GL account in FS00 and check its assignments in OBC4.
Also check mvt type settings in OMJJ transaction - 201 mvt - field selelction - additional account assignment (here business area is optional.)
You need to change either of them. Take help of FI consultant.
Thanks

Error in billing document while posting to accounting

Hi all,
We are geetting an error while the billing document is moving to accounting
the error is Please assign a Valid Material code in the Assignment Field
please give your suggestions on this and give the what are all the configurations need to do

Dear Anil,
There are many reasons for document not flowing to accounting at the time of billing:
Please check the following:
Sufficient authorization is not available to release the document
Material master created without maintaining costing view
Material cost estimate not found for the material considered in the billing document
Back dated entries try to post in the current period
Mistakes while creating the billing document
Account assignment group not maintained in the material master
Provide the error message number, it will be easier to find the reason for the problem and solution too.
Regards,
Pavan Kumar Arvapally

Budgetory control to give error message in FI while posting

Hi!
I am working for Dairy industry project.
Our client is having Daiary cooperative Societies as share holders,Vendors & customers. I am planning to create Vendor code and customer code seperate and assign customer code/vendor codes in respective master data. Is this sufficient to get net balance for purcahse & sales transactions in order to pay to the dairy cooperative socieities. Another question is regarding share holders, for which I am planning to create special GL account for Vendors, in order to post share capital in respective vendor accounts ( as share holders), is this OK?
The client is having another requuirement, generally government allot some Grants for specific expenses, in this case client wants to track Grants received and Grants utlized, if grant amount utlization crosses 75% warning message has to come, if it crosses 100% error messge has to come while creating purcahse itself ( if there is no purchase order at the time of posting the documents)? Is this can be achieved through fund management. if yes, how to do it.
The client is also having budgetary control, but this budget process also similar to grants process. If we configure Budgetary control in Controlling, can we prevent of posting documents in FI , by giving the error message while budget amount is crossing?
regs,
ramesh

Hi
1. Setting up Vendor/Customer is OK to get net balance as you said
2. Spl GL account to track share capital also seems OK
3. For grants, there is a specific functionality under PSM (Public Sector Management) component of FSCM... I guess, this is added in EhP4.. I am not sure if it was there earlier as well
Fund Mngt can also be tried for funds mngt, but am not too sure... Its better to use the specific functionality
4. Regarding budgeting in CO, it can not be on individual GL accounts.. To have budget on GL accounts, you need to activate Funds MNgt.... Std budgetary control in CO is @ Internal Order Level
Regards
Ajay M

Error Message F5 702 while posting Invoice using MIRO

Hi,
Our Client is in SAP Version 4.6c, and a document is parked and we are trying to post it, it has two cost centers and one G/L account. We have applied SAP Notes related to this error and our client has applied Support packs also.
How to overcome such an error and post this document?
Is it relating to rounding errors, we get a amount difference of 0.02 and SAP does not allow the invoice to be posted.
Can anyone help us?
Regards,
Anitha

Hi
Please provide the long text of the Error message.
From the Error description , my understanding is , there is confilct between Reference date format and Asset value date.Please check in Asset accounting settings.
Please provide the long text fo the error message, so that we try to give appropriate solution.Please check any OSS note apllication required for this since you are saying bout upgradetion from 4.7 to 6.0
Regards
Ramakrishna

Error in transaction currency while posting GL open items

Hello,
I have made an LSMW template to upload GL open items data; the flat files are perfectly getting converted but while uploading, I encounter error messages stating;
Message type      Message ID           Message No             Message Text
E                             RW                         609     [FI]:Error in document: BKPFF $ <CLNTNAME>
E               F5                          702     [FI]:Balance in transaction currency
Please help me resolve this issue.
Thanks,
Zahack

Well Salil,
Thanks for your reply;
Actually; i got to manually assign -1 for the next line item for credit; for that I got to go to 5th step of LSMW; at WRBTR field; I had to run a select from tbsl table to check for bschl and shkzg fields; and then make an if; whether shkzg is 'H' - Credit type; if it is then bbseg-wrbtr = bbseg-wrbtr * -1. This resolved the issue.
Well, this can also help developers working with the GL open items.

Error regarding cost center while posting migo

Dear sap experts
I am getting this error message
COST CENTER A123/A123 IS BLOCKED AGAINST REVENUE POSTINGS ON 29/12/2010
where A123 is cost center as well as controlling area.
I have some more doubts
WHETHER PROFIT CENTER SHOULD BE CREATED FOR THIS.
TO CREATE PROFIT CENTER PROFIT CENTER GROUP SHOULD BE CREATED BUT I AM GETTING ERROR
WHILE CREATING PROFIT CENTER GROUP. HOW TO SOLVE THIS
THANKS IN ADVANCE

hi
I followed your reply but now I am getting this error
COMPLETE PA TRANSFER STRUCTURE FI
How to overcome this.... any idea
waiting for the reply
bye

Error Message KI 183 while posting billing document to Accounting

Dear Sir,
We are in the process of implementing COPA along with SD Module. In our
business scenario, we raise Sale order to claim Transport service
charges from the customer and need to assign delivery cost ( like
Incentive pay to the driver and fuel charges). The Cost element defined
for Incentive pay and the fuel charges are of category 1.
Since we are using funds management to control the expenses, we cannot
define the cost elements to be of category 12.
We have assinged the condition types to the value fields properly. But
when we release the Billing document to Accounting, we are getting the
error message KI 183. I have read the long text of this message. The
explanation does not suit our requirement due to the reason mentioned
above.
Can anybody tell me how to solve the issue
Regards.,
Rama

Check the following notes:-
=> Note 590855 - VF02: Error message KI235
=> Note 629972 - VF01: Error message KI183
=> Note 177354 - Billing doc:Err message KI183, KI235 in Rel. 4.6A
G. Lakshmipathi

Error while posting A/R Downpayment Invoice with Excisable Tax Code.

While posting A/R Dowpayment Invoice with Excisable Tax Code error of "Unbalanced Transaction" appears. This error does not occur while posting A/R Downpayment Invoices with Non-Excisable Tax Codes.
Kindly provide a solution for the same.

SAP Note Number: 1179405
Error -5002 when trying to copy a document with Sales BOM
In order to create the delivery via the DI, you need to set the oDoc.Lines.BaseLine value to the LineNum value from the RDR1 table (in the above example you should enter the value 2).
we set oDoc.Lines.BaseLine=0 before starting the lines loop. This has resolved the issue.
This note was really helpful and it was found in another query.
You can also refer to this. https://forums.sdn.sap.com/click.jspa?searchID=19070513&messageID=6178079
Thanks.
Edited by: Sadanand Manda on Nov 24, 2008 12:16 PM

Error-while posting the goods in plant

Hi,
i got error message like this while posting goods in the plant with t.code MB1C
"Account determination for entry INT GBB_______ BSA 3100 is not possible"
can any one know about solution for this error
Thanks&regards
kishore kumar

hi
Hi,
Use t.code:OBYC, enter chaart of account
Click GBB
In next screen enter Val. Gro. Code, Acct Gro. Code, Valuation class and G/L accounts for Dr & Cr and save.
Note: before that u have save the Rules
How to save Ruls:
OBYC-> enter chart of account-> Click BSX->Click Rules
Select the check box of Debit/Credit in accounts , General modification, Valuation Modification, Valuation class Account are determine based on TAB and save.
Regards,

Error in w.tax while posting entry in f-53

Similar Messages

Maybe you are looking for