Error 'Specify account number' while posting a parked document through FBV0

Hi,
I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

Hi,
Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
Try same scenario in the development its be useful
Regards,

Similar Messages

Error messege BP603 while posting the parked document budget exceeded

Hi ,
We are having the budget function and its for overall release.
Budget has been relased and assigned value is less then the released budget in all conditions.
Its throwing the error messege No BP603 while posting the parked documents. Unable to understand the reason why its behaving.
Please let me know if anybody has faced such problem.
We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
Regards
N.Raju

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

Error "Specify account number" during PRELIMINARY_POSTING_FB01

Dear All,
I am trying to post FI document in FB01 through PRELIMINARY_POSTING_FB01 F.M.
I am passing following data to it.
*Populate the header
Company code
ls_bkpf-bukrs = ls_posting2-bukrs.
Year
ls_bkpf-gjahr = ls_posting2-budat+0(4).
Document Type
ls_bkpf-blart = p_blart.
Posting date
ls_bkpf-bldat = ls_posting2-bldat.
Document Date
ls_bkpf-budat = ls_posting2-budat.
Period
Is_bkpf-monat = Is_posting2-monat.
*currency
Is_bkpf-waers = is_posting2-waers.
*Item data
*posting key
is_bseg-bschl = is_posting-bschl.
*Account
is_bseg-hkont = is_posting-hkont.
*amount
is_bseg-wrbtr = Is_postng-wrbtr.
After executing this it gives error
"Specify account number"
Is there any sollution for that......
Regards,
Amar

That is bcoz the account number you are populating in table parameters is not matching with values in table while processing. Use FM conversion_exit to prefix zeroes so that it matches the value in table.

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

Hi,
I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
I am not sure what is the reason for this. Can anybody help me sort out this Issue.
Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data Tab in the Invoice.
Regards,
Deepak.

Dear Praveen,
please check into IMG if You defined the WT type You are using for Your Comapny code:
IMG --> Assign Withholding Tax Types to Company Codes
I hope this helps.
Mauri

While posting the parked document, we are getting the error Message No.0034

Dear Experts
First we created Parked Document.
After that when we try to post above said parked document, we are getting the below error:
"Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
Message no. 00349
Diagnosis
The specified field does not exist on the screen.
Procedure
Check your batch input data."
Can any of you please provide the solution.....
Thanks and Regards
PVSRG

But if you clearly observe the error which you have got, it says the Budget period is not on the screen.
Check and try once again
"Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
Message no. 00349
Diagnosis
The specified field does not exist on the screen.
Thanks

Error in account determination while creating shipment cost document in SD

Dear all,
I have come across a case where an error has come in determining account while creating shipment cost document. This is happening only in the case of a particular shipment cost type. The Status of " Calculated" is C, the status of " Assigned" is " B" and the status of "Transferred" is A.
Can any one throw any light as to why it is happening like this?
Thanks and best regards
Kumaran

Dear all,
With the help provided, I am unable to resolve the issue.
Any further inputs please?
Thanks & best regards
Kumaran

Error while posting parked document in fbv0.

hi experts,
while posting a parked document in transaction fbvo the follwing information appears
and document is not posted.
Field WITH_DIALG-WT_BASE(2) is not an input field
message no 00347
Diagnosis
A transaction is processed using batch input.
System Response
The runtime error field xxx occurs (invalid entries)
Procedure
Correct the batch input data. Depending on the processing scenario, this can affect either of the following objects:
Batch input session
CATT procedure
Application program
regards
pankaj

Hi
Do one transaction in foreground and check where system is giving error and correct it.
Thanks
GG

BAPI_ACC_GL_POSTING_POST is not posting a parked document

Hi,
I am trying to post a parked document using BAPI 'BAPI_ACC_GL_POSTING_POST' but its giving an error 'Balance in transaction currency'. I am providing the document number of the parked document in the header data of the BAPI and providing G/L details(Debit) where the document will be posted. The parked document already contains the credit entry i.e. vendor number and the amount of the invoice. So in the BAPI, I am just entering the Debit amount and the G/L. But its giving the error. Has any one posted a parked document using this BAPI or any BAPI. I want do the same thing as we are doing through transaction 'FBV0'.
Your help will be appreciated.
Thanks,
Padman

- Call transaction SM13 after calling your BAPI, to check if some update tasks are waiting or running.
- Did you check BAPI BAPI_CASHJOURNALDOC_CREATE ([Note 616804 - FBCJ: BAPI for saving cash journal documents|https://service.sap.com/sap/support/notes/616804])
- For extension in BAPI accounting, check [Note 487722 - Using EXTENSION1 for accounting BAPIs|https://service.sap.com/sap/support/notes/487722]
- For general information on ACC BAPI check [Note 306504 - Collective note: BAPIs for the AC interface|https://service.sap.com/sap/support/notes/306504]
- If data is already in FBCJ, look at FM FCJ_POST_ALL and FCJ_POST.
Regards,
Raymond

How to post a PARK document with Withholding Tax

Hi All,
I have parked a document using FB60.Vendor is subject to withholding tax.Now,when i am posting the document through FBV0,the error message displayed is :
"Field BSEG-SECCO does not exist in the screen SAPMF05A 0303".
The error message says that Section Code (Withholding Tax) is missing for Special G/L Indicator Line Item.I dont have provision to enter section code in the screen.
My entries are :
29J Vendor a/c Dr.
50 XYZ a/c
If i using F-02 and not parking ;then it is getting posted.
Note: Line Item is a special G/L Indicator
Please advise how to post a park document using FBV0 with special g/L Indicator and vendor is subject to withholding tax.

Hi Parag,
Section code field doesnot exist in the special G/L indicator line item of the document.So,i cannot enter it.
But,when posting the parked document ,it is asking for Section Code.
The error message displayed is:
"Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303"

Posting Parked document through workflow

Hello Experts,
I have configured all the setting for document parking.
I have posted the document through FV60, workflow has triggered to the 1st level. After the 1st level approval, it's triggered 2nd level approval as well.
But after the 2nd level of approval, i am expecting to post the parked document. But it's not happening. Is there any other settings to post the parked document through workflow?
Thanks
Aswin

Hi,
Please go through the below wiki:-
[http://wiki.sdn.sap.com/wiki/display/Snippets/ConfiguringparkingdocumentsworkflowinSAPsystem]
Regards,
SDNer

Error F5 702 while trying to post a parked document in MIRO

Hi,
Our Client is in SAP Version 4.6c, and a document is parked and we are trying to post it, it has two cost centers and one G/L account. We have applied SAP Notes related to this error and our client has applied Support packs also.
How to overcome such an error and post this document?
Is it relating to rounding errors, we get a amount difference of 0.02 and SAP does not allow the invoice to be posted.
Can anyone help?
Regards,
Anitha

Hello Raju,
Its a invoice which the user posts via a MIRO.
I can do it with a FM also, U r right.
There have been lots of issues with rounding values when trying to post a parked document in MIRO , till now such invoices were getting posted. Now, we r getting errors, just trying to find if someone else had encountered with a similiar problem and what was the approach they used?
we get a value of 0.02 difference when trying to post via MIRO for some invoices, till now such invoices were getting posted. Its purely a functional issue though.
We checked the invoice also, its prefectly fine. There does not seems to any issue, just wondering if there has been any exchange rate problems etc...
Thanks,
Anitha

Posting A Park document of year 2005 in 2007( Error message no. FP 041)

Hi All
I have a parked document in year 2005 and know the user want the same to post in 2007. while changing the header(posting date and making as 01.01 2007) through T.code MR44.
I am getting the following error.
Changing of document number or fiscal year not possible here
Message no. FP 041
Please let me know whether i can post a parked document of 2005 in 2007.
or any way to rectify the same.
regards
Ramesh

How can we change a parked document's fiscal year?
I parked a document in fiscal year 2011, period 01. now I want to post it in fiscal year 2010, period 12.
When I use FBV2 to change header information, it shown up an error message:
Changing of document number or fiscal year not possible here
Message no. FP041.
How can I do now?
Thanks.

Error while Posting Physical Inv Document

Dear All,
While posting physical Inventory Document contains only 776 items only
i got this error
Maximum number of items in FI reached
Message no. F5727
Regards,
Pardeep Malik

What did you do with the PID? did you modify to allow more than 333 items ?
as each item in a PID can create 3 entries in FI, the PID is limited to 333 items, because FI document can only take 999 items

XK01 Account group 0003 uses ext no assignment Specify account number

Hi
When I am trying to create one time vendor in XK01 , after filling all fields (except vendor , when I click the enter I am getting the following error .
"Account group 0003 uses ext no assignment Specify account number "
Any idea where should I specify account number and what is this account number ? I mean is it GL account number ?
Thanks
SN

Hi Satya,
if you donot want to assign the external number range to the vendors.....use T.code XKN1..remove the tickmark from checkbox "EXT" and save.
Try creating again. The problem occurs because you have selected external number ranges for vendors in XKN1.
Regards
A
Assign points if useful

Error 'Specify account number' while posting a parked document through FBV0

Similar Messages

Maybe you are looking for