Error in workflow execution

Hiee friends ,
         I am new to workflow and learning it from sdn blogs and elearnings .
         My workflows were running fine but only recently there is a error every time i execute my workflow .
         Evertime i execute my workflow , a default output comes [its a output of one of my earlier workflows].
          I tried to create some new workflows but the same output is coming .
          Please help me out from here.
        Is there anyway to have the workflow configuration set to default ones.

Hi Lokesh,
Check who all are the recipient types for the Business Object event that is triggering your workflow. To check that do the following:
1. Go to t-code SWELS, activate the event trace.
2. Run your transaction and generate the BO event you are using as triggering event of your workflow
3. Go to t-code SWEL and check the recipient types of the BO event.
You can remove the event linkage to other workflows using t-code SWETYPV.
This would ensure that only the desired workflows are triggered when the BO event is generated.
Hope this helps!
Regards,
Saumya

Similar Messages

  • Error during Workflow execution

    Hi All,
    We have got new Sourcing Server7.0 and uploded Master Data. After that I have created one Project and attached workflow. I'm trying to achieve 1 step approval in the project(3 phase:- Draft,Approval,Approved).
    When I'm changing the phase from Draft to Approval, document got locked but not going to approver user for approval. In the XPDL prescript below logic is present:-
    import com.frictionless.api.common.exception.*;
    import com.frictionless.api.common.log.Logger;
    import com.frictionless.api.common.platform.*;
    import com.frictionless.api.common.types.*;
    import com.frictionless.api.doc.collaboration.*;
    import com.frictionless.api.doccommon.masterdata.*;
    import com.frictionless.api.ibean.*;
    import com.frictionless.api.util.*;
    import com.frictionless.api.workflow.*;
    import com.frictionless.api.projects.*;
    import com.frictionless.api.common.log.*;
    import com.frictionless.api.ibean.*;
    import com.frictionless.api.usermgmt.masterdata.*;
    import com.frictionless.api.doc.collaboration.*;
    import com.frictionless.api.doccommon.doc.contract.*;
    //  Add the project approver from the collaborator collection
    // Get the default collection "COLLABORATORS"
    collaboratorsCollection = doc.getCollectionMetadata("COLLABORATORS").get(doc);
    // Check if collaborators collection's size is greater than zero.
    if (collaboratorsCollection.size() > 0)
       // Iterate over the collection.
      for (int i = collaboratorsCollection.size() - 1; i >= 0; --i)
            // Get collection member
            collaboratorsCollection_member = collaboratorsCollection.get(i);
            // Check if member has value.
           if (hasValue(collaboratorsCollection_member))
                // Get the collaboration role of the collection member.
               collaboratorRole = collaboratorsCollection_member.getCollaboratorRole().getDisplayName();
                // Get approver of Role "Buyer contractor hiring".
               if(collaboratorRole.equals("Buyer contractor hiring"))
                    principal = collaboratorsCollection_member.getPrincipal();
    // Create a logger for messaging
    logMsg = Logger.createLogMessage(session);
    if (hasValue(principal))
    // Add the user account as the approver
        addApprover(principal);
        // log details
        logMsg.setLogMessage("Added user: " + principal.getDisplayName() + " as approver");
        Logger.info(logMsg);
    I'm getting below error:-
    Sourced file: inline evaluation of: ``import com.frictionless.api.common.exception.; import com.frictionless.api.com . . . '' : Attempt to resolve method: createLogMessage() on undefined variable or class name: Logger : at Line: 43 : in file: inline evaluation of: ``import com.frictionless.api.common.exception.; import com.frictionless.api.com . . . '' : Logger .createLogMessage ( session )
    at bsh.UtilEvalError.toEvalError(Unknown Source)
    at bsh.UtilEvalError.toEvalError(Unknown Source)
    at bsh.BSHMethodInvocation.eval(Unknown Source)
    at bsh.BSHPrimaryExpression.eval(Unknown Source)
    at bsh.BSHPrimaryExpression.eval(Unknown Source)
    at bsh.BSHAssignment.eval(Unknown Source)
    at bsh.Interpreter.eval(Unknown Source)
    at bsh.Interpreter.eval(Unknown Source)
    at bsh.Interpreter.eval(Unknown Source)
    at com.sap.odp.comp.scripting.ScriptEnvironment.execute(ScriptEnvironment.java:144)
    at com.sap.odp.workflow.engine.handlers.PhaseChangeInstantiationRequestHandler.
    Please let me know If i need to place any jar file in Server coz error is coming for few import files.
    Thanks!!!
    Edited by: Deepak Arora on Jul 21, 2011 11:27 AM

    Issue solved...i have replaced the import line with the api info of Sourcing version-7.

  • Error in workflow while linking goods receipt document with parked invoice

    Hi All,
    I parked document using Tcode MIRO, when WF has been executed and goods receipt document has been created.At the time that we tried to link this goods receipt to parked invoice document in the workflow,The problem happens with work item saying the status as Error. See the below error.
    MIRO Invoice: 801061193 2010 Item: 000001     13.09.2010     09:24:58     Error     AP Workflow for MIRO/MIRA Parked Invoice
    Can anyone advice why it is coming so?
    Thanks in advance.

    Hi
    In SWEL go to workflow trace and see what exactly is the error. This error description is too generic to arrive at soln.

  • Error on KEB0 execution ? = Program error: BI service API(component BC-BW)

    Error on KEB0 execution ?
    Iu2019m trying to create a data source on KEB0, but when I try to create, the system give this error:
    u201CProgram error: BI service API (component BC-BW) terminated: MAPI
    Message no. R8401u201D
    Some one knows this message ?
    Thanks !

    Marcus, have you checked following Note?
    504847 - Termination when creating a CO-PA DataSource

  • Error in XPRA EXECUTION Phase of Add On installation in SAP sys in SAINT

    Hello All,
    I have tried to install VERSANH ADD On on my SAP System with SPAM Version 7.00 <0032 kernal level 48.
    i have run transaction SAINT imported all PAT and ATT files and started the process.
    now after running around 16 Hrs it is throwing error in  XPRA EXECUTION Phase.
    The Error is
    The Add on installation terminated during phase XPRA EXECUTION
    Choose CONTINUE to continue the import
    Choose BACK to delete the installation queue
    Choose LOGS to display the import logs
    i have clicked on Continue, the it process and after 1 Hr throws same error
    i have navigated to OS Level in usrsaptranslog and there in log i am getting this line as error
    ERROR RFC function TRINT PROGRESS INDICATOR returned 18
    Thanks in advance.
    Edited by: Vinit Soni on Apr 14, 2009 11:05 AM
    Edited by: Vinit Soni on Apr 14, 2009 11:06 AM
    Edited by: Vinit Soni on Apr 14, 2009 11:07 AM
    Edited by: Vinit Soni on Apr 14, 2009 11:08 AM

    Please check the log files under /usr/sap/trans/tmp directory. There will be some information about the error and paste the log here to analyze the problem.
    Regards,
    Subhash

  • Error in Workflow for PR Overall Release

    Dear SAP Fans,
    I am getting error in workflow (WS20000077) after release of Purchase Requisition with first person and getting message in OutBox with the following errors and is unable to go to next person's Inbox for release PR.
       Error when creating a work item
       Error when processing node '0000000004' (ParForEach index 000000)
       Error when creating a component of type 'Etapa'
       Error when starting work item 000000392108
       Agent determination for step '0000000004' failed
       Error in resolution of rule 'AC20000026' for step '0000000004'
       No configuration for workflow WS20000077 version 0001
       Work item 000000392108: Object FLOWITEM method EXECUTE cannot be executed
    How can I correct the above errors. Please help me !!!.
    Thanks in advance,

    HI,
    Just a thought,
    Please check, If some one changed WF-USER password.
    also check if the WF-USER is a Service user and not dialog user.
    Regards,
    -Venkat.

  • Error when using FTP in iWeb 09! "Error 500: Script Execution Failure"

    I have my domain through 123-reg and I have free hosting with host-ed.net when I add a simple index.html file my website works fine displaying the 1 line of text that I asked for, so it is all configured correctly.
    How ever when I use the FTP upload thought iWeb '09 I always get "Error 500: Script Execution Failure"
    www.breslan.co.uk
    Anyone know why?

    I have logged into my hosting and changed the permissions to '755' and move the files from the folder iweb used to the root of the site i know get "Parse error: syntax error, unexpected T_STRING in /~/www/breslan.co.uk/index.html on line 1" there is only 1 line of code in index.html and that is
    <?xml version="1.0" encoding="UTF-8"?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html xmlns="http://www.w3.org/1999/xhtml"><head><title></title><meta http-equiv="refresh" content="0;url= Welcome.html" /></head><body></body></html>
    please help!

  • SMQ2: SYSFAIL Comparison error during the execution of a simple

    Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
    <?xml version="1.0" encoding="UTF-8"?>
    <Messages><Message1/></Messages>
    In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
    But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
    Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
    I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
    <ns0:Message1></ns0:Message1></ns0:Messages>
    Thanks for your help, best regards, Martin

    You seem to be having a multi-mapping involved.
    The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
    Ex:
    <SRC>
    <First>
    <Middle>
    <Last>
    </SRC>
    If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
    if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
    Unless you create a message (even though empty) you will continue to receive the error message.
    Regards,
    Abhishek.

  • Hi installed Photoshop Cs6 on my Vista os and crashes gives following error DEP (Data Execution Prev

    Hi installed Photoshop Cs6 on my Vista os and is crashing the Photoshop and gives following error DEP (Data Execution Prevention) can someone help me..

    no I did not receave any errors during instalation. Yes I installed it before but occured same problem so I unstalled and made a new isntall.
    I found these in the end of the log hope these helps.
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    [    4460] Fri Nov 02 19:54:12 2012  INFO
    Exit Code: 0 - No error.
    Please see specific errors and warnings for troubleshooting. For example, WARNING: DF029, DW024 ...
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    END - Installer Session
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

  • Error on Workflow email notification in oracle 11.5.10.2

    Anyone seen similiar error on Workflow email notification in oracle 11.5.10.2
    UNEXPECTED:[fnd.wf.bes.server.SystemLoader.getLocalSystem]:Caching disabled due to JTF exception: oracle.apps.jtf.base.resources.FrameworkException: CacheComponent not registered (KEY=FND_BES_SYSTEM_CACHE) (APP=FND)
    UNEXPECTED:[fnd.wf.bes.server.AgentLoader.getAgent]:Caching disabled due to JTF exception: oracle.apps.jtf.base.resources.FrameworkException: CacheComponent not registered (KEY=FND_BES_AGENT_CACHE) (APP=FND)

    I do not see any similar issues reported in MOS website that could be relevant to Workflow.
    Can you find any errors in the database log file?
    Please run the diagnostics scripts in these docs and see if it helps.
    Troubleshooting Oracle Workflow in Applications 11i [ID 262011.1]
    11i: Oracle Workflow Cartridge (WF): Workflow Java Mailer Diagnostic Test [VIDEO] [ID 1148948.1]
    11i: Oracle Workflow Cartridge (WF): Workflow Health Check Diagnostic Test [VIDEO] [ID 1148953.1]
    11i : Oracle Workflow Cartridge Workflow Java Mailer Setup Test [ID 274764.1]
    If the diagnostics scripts did not help then I would suggest you log a SR.
    Thanks,
    Hussein

  • Error handling workflow not getting triggered

    Hi all,
    I'm creating a outbound IDoc. And for error handling workflow.. I created a organization structure in PPOME and assigned users. I gave this position number thus created in the partner profile in post processing permitted agent tab.
    But when the Idoc is in error, this is not coming to my inbox.
    Can someone please help me with this.. and let me know what went wrong.
    Thanks in advance.

    Here you need to be careful,
    if the agent assignment is not maintained properly, there may be a chance everyone in the organization will get the item.
    I hope you have created a single workitem for error handling. goto additional data-> agent assignment-> maintain. make sure the attribute is defined as general forwarding allowed. or you maintain the role/position/user/whatever.as the possible agents. still you dont get the result, debugging the default rule in the task ->default rule -> agent.
    hope this helps.
    with regards,
    Sudhahar R

  • ABAP programming Error in DTP execution

    Hi
    When execute DTP on InfoCube it generate following error after approx 10 to 15 minutes:
    ABAP programming Error in DTP execution
    Screen Shot also attached.
    In PSA is shows all records OK (30 records)
    What is the solutions?

    Hi Imran,
    Good to knew you got resolution for this issue.
    If you are getting output from above replies mark the correct or helpful answers. So that it will be helpful if some one faces the same issue again. http://scn.sap.com/docs/DOC-46006. You marked your answer as correct now.

  • An unexpected error during Command execution

    Hi,
    I am using Project Server 2007 SP 2 at the moment. One of our user keeps encountering this error "An unexpected error during Command execution" for a project file.  We tried to restore the earlier version of the plan using Administrative restore.
    But it only works as a temporary fix as the problem keeps reapprearing. Kindly help.

    Only SP2 for Project 2007? Probably not worth trying to debug, with 2007 it is almost essential to have SP3 and the very last cumulative update for Project pro and Server. 2007 was a very buggy version (they were forced to release at same time as Office
    2007 and it was too soon).
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • Got error in job execution, but the standalone procedure runs fine.

    I got error in job execution. But it runs fine as standalone procedure. Where could it be wrong?
    _>exec dbms_job.run(145373);
    BEGIN dbms_job.run(145373); END;
    ERROR at line 1:
    ORA-12011: execution of 1 jobs failed
    ORA-06512: at "SYS.DBMS_IJOB", line 481
    ORA-06512: at "SYS.DBMS_JOB", line 275
    ORA-06512: at line 1
    I checked the alert log file
    ORA-06550: line 1, column 101:
    PLS-00103: Encountered the symbol "RPTIMPORT" when expecting one of the following:
    := . ( @ % ;
    Thu May 2 12:59:34 2013
    Errors in file /oracle/admin/PDAMLPR1/udump/pdamlpr11_ora_15574.trc:
    ORA-12012: error on auto execute of job 146925
    ORA-06550: line 1, column 133:
    PLS-00103: Encountered the symbol "" when expecting one of the following:
    := . ( @ % ;
    The symbol ";" was substituted for "" to continue.
    The trace file:
    *** ACTION NAME:() 2013-05-02 12:43:48.261
    *** MODULE NAME:(SQL*Plus) 2013-05-02 12:43:48.261
    *** SERVICE NAME:(SYS$USERS) 2013-05-02 12:43:48.261
    *** SESSION ID:(1811.10644) 2013-05-02 12:43:48.261
    *** 2013-05-02 12:43:48.261
    ORA-12012: error on auto execute of job 145373
    ORA-06550: line 1, column 133:
    PLS-00103: Encountered the symbol "" when expecting one of the following:
    := . ( @ % ;
    The symbol ";" was substituted for "" to continue.
    *** ACTION NAME:(********* Schedule Job: Report C) 2013-05-02 12:47:58.178
    *** MODULE NAME:(PATIENT_REMEDIATE_JOB) 2013-05-02 12:47:58.178
    *** 2013-05-02 12:47:58.178
    ORA-12012: error on auto execute of job 145373
    ORA-06550: line 1, column 133:
    PLS-00103: Encountered the symbol "" when expecting one of the following:
    := . ( @ % ;
    The symbol ";" was substituted for "" to continue.
    *** 2013-05-02 12:52:43.409
    ORA-12012: error on auto execute of job 146924
    ORA-06550: line 1, column 101:
    PLS-00103: Encountered the symbol "RPTIMPORT" when expecting one of the following:
    := . ( @ % ;
    *** 2013-05-02 12:59:34.651
    ORA-12012: error on auto execute of job 146925
    ORA-06550: line 1, column 133:
    PLS-00103: Encountered the symbol "" when expecting one of the following:
    := . ( @ % ;
    The symbol ";" was substituted for "" to continue.
    ~
    ~
    The job was created as the following with 30 min interval:
    The job number: 145373
    DECLARE
    X NUMBER;
    BEGIN
    SYS.DBMS_JOB.SUBMIT
    ( job => X
    ,what => 'RPTIMPORT.pr_exec_pop_ddl21_data_irt'
    ,next_date => to_date(sysdate)
    ,interval => '/*30:Mins*/ sysdate + 30/(60*24)'
    ,no_parse => TRUE
    SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
    END;
    Thanks for help!

    the issue is resolved. I missed to put ";" at end of what statement. Thank all.

  • Error in Workflow JTFTASK

    Hi,
    Ours is 11.5.10.2 version. Once we login to Oracle applications, above of responsibility list. we see some messages like
    "Error in Workflow JTFTASK /20991-10881 3205: 'AASTML' is not a valid role or user name. ".
    From where it's generating these type of messages and how to get rid of them.
    Please help me.

    Do you have this profile enabled as Yes at either Site or user level?
    Sign-On:Notification
    Change the value to No and test. Looks like one of the workflows (JTFTASK) that are sending this notifications has errored.
    Thanks
    Nagamohan

Maybe you are looking for