Error. in WS Navigator - no endpoints found for interface

Dear Friends,
I have created a new Enterprise Service Interface and implemented in ABAP. After the implementation I used SOAMANAGER to create the endpoint and publish the service using WSPUBLISH to Service Registry. When I tested this service from SOA Management application(SOAMANAGER), the endpoint is working very good, but when I am testing this service from Service Registry, it is now showing any endpoint in the 'Enter Input Parameters' Step. Also when I am trying to search the Service by using 'Search by Logical Destination', it shows the Service and when I select it, it shows an error message, "no endpoints found for interface (<namespace>/document)<Service Interface Name>_Document".
If some one knows about this issue, please advice me to do next steps.
Also I am planning to call this service from Visual Composer, I have configured the two logical destinations over there, also the service registry, even though, when i am searching the service, it shows an error like "Could not complete search".
Please advice me for the above issue also.
Thanks in advance
Vipindas

Hi,
If you have configured and tested from SOAMANAGER (which opens WSnavigator) then it is configured correctly. May be you are using wrong WSDL address.
Copy url of wsdl from SOAMANGER test screen and use it directly in WSnavigator for testing.
Regarding publishing of service WSPUBLISH should be able to publish correct service into service registry, but if for any reason it is not working then you can "publish" it directly from service registry by using publish option and provide url of wsdl from above option.
If for any reason VC is unable to search service registry then create destination template for your every service by providing WSDL and use it in VC.
Regards,
Gourav

Similar Messages

No endpoints found for interface

Hi All,
I have the following scenario: RFC in the backend system (ECC 6.0 SP09 no EhP's) and PI 7.1 as an Integration Broker.
I have imported the RFC into Enterprise Services Repository and done the necessary tasks to configure an Enterprise Service.
After that I have published the Interface to the Services Registry, Testing the Interface in WSNavigator is working fine.
I have imported the Enterprise Service into Web Dynpro as a model and when running the Web Dynpro application I am receiving the following error:
com.sap.esi.esp.service.server.query.discovery.ExtendedServiceException: no endpoints found for interface TreeInformationQuery_Out
defaultTrace:
Caused by: com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for web service mass config parameters service reference ID 'TreeInformationQuery_Out_FICSIT_BASIC' and application name 'demo.sap.com/ficsit~tree'. Check mass configuration has been done properly.
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:522)
Any idea's?
Regards,
Ridouan

Hi Sergei,
My backend system is ECC 6.0 SP9 (no EhP's) and therefore I can't use the trx SOAMANAGER.
I have imported an RFC from the ECC system into the PI 7.1 Enterprise Services Repository (Builder) and then published the Service (from Sender Agreement) into Services Registry also on the PI 7.1 system.
Testing the service in WS Navigator is working fine, I can see an endpoint here.
Also testing the WSDL with third-party application is working fine.
JAVA Web Dynpro is given me the error: no endpoints found for interface...
Thanks again.
Regards,
Ridouan

Error message - "Overlapping validity areas were found for country BR"

Hi Experts,
For a certain output type Y953 (e.g. for the shipment 2002355665 related to the DN 3087912658), an error message "Overlapping validity areas were found for country BR" is coming in as error.
The error message is appearing during the idoc processing of the shipment.
This is an incident of Dangerous Goods.
I would like to know if it is technically / functionally possible to find out as to why exactly this mesage is coming and how can we rectify the problem.
From technical point of view we checked that this message was not being called in the SAP system but was dynamically called.
kindly let me know of any breakthrough as this issue is critical as dangerous goods are being transported without needed documents printed.
Thanks in advance.
RIttik

Check whether note 836139 helps you.
thanks
G. Lakshmipathi

XML Form Error: java.lang.RuntimeException: No system found for alias

Hello,
We are currently having an issue with our XML forms. When we try to access our XML forms we receive the following error:
java.lang.RuntimeException: No system found for alias SAP_R3_QWA
Is there a place within the forms to set the system alias?

Hi Jereme,
Have you installed the DMS Connector for KM?
I can imagine that this issue is related to an incorrect version of the DMS Connector for KM (regardless of whether you are using the DSMRM or not).
In that case you can do the following to correct the issue:
1) Undeploy your current version of 'DMS Connector for KM'
2) Download the latest version of 'DMS Connector for KM' from Service Marketplace and deploy it to your portal
3) Restart J2EE engine after deployment
Hope this helps,
Robert

ERROR in PI : No sender agreement found for , , , , ,

Hello everybody,
i'm working with SAP PI 7.1
it's a new installation.
I created the first easy interface JDBC-Pi-File.
when i activate the CC i don't see any message in SXMB_MONI but in RWM i see the messages in Waiting status and when i look inside i see the follow error:
SOAPFAULT received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_CSIS_DEV, http://xxxx.com/test, SI_DB2SP_DOCUMENTS_AA_02; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_CSIS_DEV, interface namespace http://xxx.com/test interface SI_DB2SP_DOCUMENTS_AA_02 No sender agreement found for , , , , ,
1-Configuration is ok. I create all steps and sender Agreement exist
2-end point http://yyyyy:50100/sap/xi/engine?type=entry is correct and the same in SLD and sxmb_adm -> Integration Engine Configuration
3-i suppose 50100 port is correct because when i try to use 8010 port i have a different error.
4- i alreadi used CPA cache refresh and SXI_CACHE.
Any suggestion?
thanks

after 20 minuts i retry.
Now the error message is changed:
Transmitting the message to endpoint http://yyyyyy:8010/sap/xi/engine?type=entry using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection refused.
Edited by: apederiva on Aug 25, 2010 11:35 AM

LIBOVD ERROR - "validateContextToken: workflow session was not found for given context. Create a new workflow session with token"

Hello everyone,
I have the following scenario:
We're using "Oracle SOA Suite 11g 11.1.1.7.0" (Patched w/ 17893896) mainly for a BPM/Human workflow composite. Former, we were having the error bellow:
<Mar 16, 2015 1:13:03 PM BRT> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Verification Service cannot resolve user identity. User weblogic cannot be found in the identity repository. Workflow Context token cannot be null in request.
ORABPEL-30511
When that error ocurred, no one was able to use the system (BPM/Human Workflow).
I opened an SR, and after some analysis from the support, it recommended me to set up "virtualize=true" in EM, and restarting the domain. Then it started logging the following:
connection to ldap://[10.200.10.57]:7001 as cn=Admin.
javax.naming.NamingException: No LDAP connection available to process request for DN: cn=Admin.
Looking up on support KB, I found this note Doc ID 1545680.1 and increased from Max size of Connection Pool 10 to 200. That did work successfully! Problem now is that the <SERVER>_diagnostic.log is being filled up with the following error:
[2015-03-31T16:03:46.421-03:00] [soa_server2] [ERROR] [] [oracle.soa.services.workflow.verification] [tid: [ACTIVE].ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: e0194e38aa6c9a2f:39fc1ff9:14c5def5247:-8000-00000000000a5653,0] [APP: soa-infra] <.> validateContextToken: workflow session was not found for given context. Create a new workflow session with token=51490173-e3d0-41dd-ae99-983915aa8454;;G;;Z+P7Oe9ABnoTUQD9ECryEW2l0/8yRcqPDyZsOWBCuzMmRgA3Qsj601TxmWQ87z2MjuwW5AH+KzgjIwkPmhJFdpc1FrE6Y/MrN1bxIDHJWu2/zP3iSNwKD07hRrh/U37Ea0TvaQyuaHJIog9y3Ptmzw==
One important point is that we're using only the embedded WLS ldap. So I am not 100% sure if we should be using the virtualize flag=true, once all docs I read point out that this should be done when using multi-ldap providers.
Also, I only got this error in the "diagnostic.log".
Although, no user has complained about using the system, I really want to work it out. Anyone has any suggestions?
Thanks in advance!

I have moved your thread from Certification to SOA Suite to get proper assistance.
Thanks,
Lisa

IDOC to FTP File - Error : SAP:Stack No receiver agreement found for send

Hello Friends,
I need to configure a senario Idoc to FTP File, Í did required settings in R3 and in PI... , did mapping and configuratino in PI... and when I send my idoc I got error msg in monitor
<SAP:Stack>No receiver agreement found for sender ,BMG_ASN_File_Component to receiver ,GTN_224,http://adis-bmg.de/asn,SI_BMG_ASN</SAP:Stack>
I search the fourm but did not got my answer, me just a bit confused...
In my senario I have having followings:
1. Bussiness System ( RFT : sender R3 system). ( I have define a party and make a connection under Idoc Partner )
2. Bussiness Component ( ZTEST_COMP as on Reciever side is File Server, so I define the reciver as bussiness component )
3. Communicatin Channel
 File with protocol FTP having communicatin component as my Bussiness Component ( reciver ). there I defied the required info for FTP
4. Reciever Determination
 Sender:
 - RFT
 - Idoc-Interface
 - urn:sap-com:document:sap:idoc:messages
 Reciever
 communication party = space
 communicatin component = ZTEST_COMP
 Configure Reciever:
 There I again define the communication component as ( ZTEST_COMP)
5. Interface Determination
 -RFT
 - Idoc-Interface
 - urn:sap-com:document:sap:idoc:messages
 Reviever:
 ZTEST_COMP
and define the mapping which I did in design ( although I have seen some threads where mentioned we dont need maaping in this case ) ?
6. Reciver agrement
sender:
- RFT
Reviver:
- ZTEST_COMP
- SI interface ( SI_BMG_ASN )
- http://test-etc.de/asn
and included my CC for file .....
Now when I send Idoc I got error msg that Reciver is not found : am I dong something wrong ? do I have to defien a bussiness system instead of Bussiness Component ?
Pls suggest...

( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.

Getting error EXP-00003: no storage definition found for segment(0, 0)

I am getting an error when using "Export: Release 11.2.0.1.0 - Production" on "AIX 6.1.0.0" and connecting to a remote database with version "Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production". I have tried many different options but the latest command that I ran is:
exp Userid=id/password@db TABLES=myschema.mytable file=mytable.dat log=mytable.log compress=y INDEXES=N
I am not using expdp for some specific reasons but this Export works on smaller tables whereas this has > 100,000 records. Also there is ample space on the landing directory.
Any help is appreciated.
Thank you!

This is the bug. Read this
OERR: EXP 3 "no storage definition found for segment(%lu, %lu)" [ID 21599.1]
It also happens When trying to export an object, all associated objects are exported as well. If one of the indexes is owned by a user and the exporting user does not have permissions on that index object the export fails.
Edited by: TSharma on Feb 7, 2013 11:47 AM

Reader 10.1.1 install error--"No valid sequence could be found for the set of patches."

At 96% completion of Reader install Windows gives above error msg. I close that window, then new window says "Installation complete." I click finish. New window opens with "Installation successful - you are now running Adobe Reader." Yet Reader does not show up as installed; unable to open pdfs. Thanks for any help.

Solution provided by pwillener on similar problem was tried. Reader downloaded, installed and seems to be working fine now............. Many thanks !!

Error JBO-26001: XML File not found for the Container FinancingBillUI.cpx

error occuring when executing a swing application build from many project's
project 1 : application with login dialog
project 2 : bc4j
project 3 : user interface
All source file compile sucessfully
What the problem ?

Michel:
Could you post the complete stack trace? From the Subject line, it sounds like your app is not able to locate an XML file (which could mean a problem in CLASSPATH), but a stack trace will help. In fact, turn on diagnostics and post the diag output around the error. Here is an instruction on how to turn on diagnostic:
1. Select the project.
2. Do right mouse click and select "Project Settings..."
3. On the Settings dialog, select Configurations/Runner.
4. In the righthand side pane, you should see a textbox for "Java
Options". Please add the following JVM switch:
-Djbo.debugoutput=console
Then, rerun. The run command should include
-Djbo.debugoutput=console as in
"D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
You should now see a lot more output on the IDE's message window.
Thanks.
Sung

SFTP Issue in OSB invocation resulted in an error: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,ip

I created a Proxy Service to do pull file and push it to sftp server
known_hosts file is present on OSB server.
It has abcserverhostname,IP ssh-rsa AA................. ==
I created a business service to do SFTP push to sftp server (remote) - Its not working.
<Error> <SFTPTransport> <BEA-381826> <Key Not Found for host hostname,10.124....>
com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124.....
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
My Business Service
End Point URI : sftp://sftpserverhostname:22/directorypath
Authetication Mode : user name, password.I have created a Service Account for sftpserver and imported in Business Service.
Do I need to give anything else in known_hosts file ?
and hostname can be any random name?
<Dec 11, 2013 1:45:37 PM GMT+08:00> <Error> <SFTPTransport> <BEA-381801> <Error occured for endpoint com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124....
com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessage(SFTPTransportProvider.java:161)
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessageAsync(SFTPTransportProvider.java:111)
at sun.reflect.GeneratedMethodAccessor566.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. see log file for complete stacktrace
Caused By: com.maverick.ssh.SshException: ssh-dss Key Not Found for host eirnode2,10.124.10.16
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.A(Unknown Source)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.verifyHost(Unknown Source)
at com.maverick.ssh2.TransportProtocol.C(Unknown Source)
at com.maverick.ssh2.TransportProtocol.processMessage(Unknown Source)
Truncated. see log file for complete stacktrace

BEA-381826 suggest that there is any issue with your public key in known_host file, can you cross verify it again. Also can you check if known_host file has appropriate permissions and I am assuming it is in /OSB_DOMAIN/osb/transports/sftp folder.
Hostname,IP algorithm publickey are the hostname, ip, and public key of SFTP server.
As per troubleshooting guidelines
The Key not found for IP, host error message indicates that the known_hosts file does not contain an entry that corresponds to the specified IP-host combination. If the entry exists, then try with another algorithm key; for example, if the earlier attempt was with an RSA key, try again with a DSA key.
Cheers,
Sahil

ALE settings error "Too many recipients found for message type" urgent

Hi all ,
please help me to solve this issue !!!!!!!!
i done with ale settings .
in the bd64 , orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

Hi,
Try to redefine your distribution model to have both receivers of your message type ORDERS in one "model view".
Regards,
Jakub

Error: No Logon Data found for Lotus Notes System

Hi,
I have created a lotus notes sytem and have configured the transport also.
But even then i am not able to create appointment under collaboration.
I get the error msg :
"No logon data found for the system 'system name' ".
And when i tried to change the User Mapping , it gives the error msg,
" Error in accessing user mapping data for selected system"
Pls help. Thanks in advance.

Hi all,
Here are a few solutions which may help you solve your problem
1) Access the lotus system with its fully qualified hostname in the system credentials and in the Lotus transport as well.(Ping from portal side and Domino side to each other to check the connectivity as well as the heartbeat check i.e.Launch http://<hostname>:<port>/<servletDirectory>/CalendarServlet in the browser to check the connectivity)
2) In the servlets.properties file,add the following(marked in bold)
servlet.CalendarServlet.initArgs=saveperiod=50,width=7,AttachmentFolder= D:
temp,useEmail=true,debug=true,logResponse=true
This will help you find on the Lotus console what the possible error could be.
3) Run the command 'load http' (coz the http protocol might not have been loaded) on the lotus console and restart the lous server.
If this is the case then make the following entry in the notes.ini file.
Against the list of ServerTasks add HTTP
Regards,
Prathamesh

Error: No address found for partner function type Ship-To Address

Hi All,
I am working in SRM 5.0(patch level1) and for PDP scenario
When I am creating service PR in R/3 with two header items and each header item has only one below line item (service item), then it transfer in SRM properly. But if I am maintaning more than one below line item for each header item it does not transfer in SRM. In SLG1 error is coming as "No address found for partner function type Ship-To Address".
Please suggest some solution.
Thanx in advance
Soma

Hi Moon
Please check this note
1166211 - Delivery address from Vendor not transferred - Ext. Req.
or do you maintain ADDR_SHIPT maintained in PPOMA_BBP
regards
Muthu

Lync Topology fails with error (Mutliple Entries were found for type "ms_RTC-SIP-EdgeProxy")

Hello everyone,
After I have finished with Lync FE, Monitoring and Archiving, and WAC server I was going well with Edge server until I got to the point of publishing the topology with Edge Server.
First time publishing went well but I wanted to place the configured IP addresses in the Edge server IP topology with a different IPs and when I published i got the below error.
I tried looking in the trusted Services in Configuration OU using ADSI Edit but never was able to figure out how do I find the duplicated entries? I used also used Softerra LDAP adminsitrator and was able to find 5 values but not sure which one to delete
among them.
Could anyone advise where to look? I'm posting the error as well below
Error: Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local".
▼ Details
└ Type: InvalidDataException
└ ▼ Stack Trace
└
at Microsoft.Rtc.Management.Deployment.AD.ADSessionExtension.FindUnique[TResult](ADSession session, QueryScope scope, ADObjectId containerId, QueryFilter filter, String name, Boolean throwOnMissing)
at Microsoft.Rtc.Management.Deployment.Core.CompatEdgeProxy.Remove(ADSession session, String edgeProxyFqdn)
at Microsoft.Rtc.Management.Deployment.Roles.AccessEdge.GlobalDeactivate(IService service)
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog[T](Action`1 action, T arg)
2/19/2014 12:25:28 PM
Error
└
Error: An error occurred: "System.IO.InvalidDataException" "Multiple Active Directory entries were found for type "ms-RTC-SIP-EdgeProxy" with ID "egelyncedge.domain.local"."
Mohammed JH

Hi,
Glad to hear you have solved the issue and shared the train of thought.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error. in WS Navigator - no endpoints found for interface

Similar Messages

Maybe you are looking for