Error indication

Hello XI Experts,
I have an asynchronous scenario file to proxy. For every transaction to proxy from File, I am calling an outbound proxy to send a response back to sender (which has the content success or error with details) which is file again. For errored out messages in R/3, I am always getting success flag for error response in XI and R/3 SXMB_MONI since from XI/R/3 perspective, the outbound proxy is send successfully even though it has error content. Is there any way to add a text or change the flag, or add a red indicator somewhere outside in the response to indicate that the message has error content eventhough the flag is success so that the user knows which message to click on for seeing the error..Any ideas are appreciated and I am sure that somebody out there must have encountered the same kind of scenario. Thanks
Ricky

Hi Ricky,
To send an success datafile and error file,i have done this same but only one senario.
i will explain how i done my senario.my senario is FILE to Proxy if proxy fails then i have to send Fault message.if i got Errors while validation then i have to put all the error in error internal table and after collecting all error i will put that information in a file at client side.
if u have to triger any alert,while u have done successfuly or if any error have been occured then that can be done by trigering an Email from Proxy side.
Think about all this if any doughts update the thread.
Regards,
phani
Reward Points if Helpful.

Similar Messages

%NHRP-3-PAKERROR: Receive Error Indication from NHS IP , code: administratively prohibited(4), offset: 0, data:

Hi,
I am continuously getting the following error on my DMVPN spoke:
%NHRP-3-PAKERROR: Receive Error Indication from <NHS tunnel IP>, code: administratively prohibited(4), offset: 0, data:
Here are debugs:
054486: Aug 30 00:01:13 DXB: NHRP: Attempting to send packet via DEST <NHS tunnel IP>
054487: Aug 30 00:01:13 DXB: NHRP: Receive Error Indication via Tunnel1 vrf 0, packet size: 128
054488: Aug 30 00:01:13 DXB: (F) afn: AF_IP(1), type: IP(800), hop: 255, ver: 1
054489: Aug 30 00:01:13 DXB: shtl: 4(NSAP), sstl: 0(NSAP)
054490: Aug 30 00:01:13 DXB: pktsz: 128 extoff: 0
054491: Aug 30 00:01:13 DXB: (M) error code: administratively prohibited(4), offset: 0
054492: Aug 30 00:01:13 DXB: src NBMA: <NHS public IP>
054493: Aug 30 00:01:13 DXB: src protocol: <NHS tunnel IP>, dst protocol: <spoke tunnel IP>
054494: Aug 30 00:01:13 DXB: Contents of error packet:
054495: Aug 30 00:01:13 DXB: 00 01 08 00 00 00 00 00 00 FF 00 58 74 68 00 34
054496: Aug 30 00:01:13 DXB: 01 01 04 00 04 04 C8 02 00 00 1B 29 3E A7 F3 52
054497: Aug 30 00:01:13 DXB: AC 12 14 A7 0A 14 5A 13
Any clue as to why these are logs are appearing?

All,
Here's a quick blurb from a document I've been working on which helps to explain this specific error message:
An error code of 7 will be returned by the NHS when an error occurs when processing the packet which is not associated with any of the other NHRP error codes. According to RFC2332, triggers for the error code include invalid version numbers, invalid protocol types, and failed checksums. This error is commonly seen if the NHS receives a Resolution Request for an IP address which it does not have an entry for in its NHRP cache. For example, if a DMVPN spoke tries to send traffic to a spoke IP address which is not registered with the hub, the hub will return an NHRP Error Indication with the Protocol Generic Error specified.
To troubleshoot this condition, you should collect the following on both the hub and spoke routers:
show ip nhrp
debug nhrp
debug nhrp packet
Collecting the debugs will show you the exact NHRP packets which are being sent and received, which may give you an indicate as to what is prompted these errors to be return. Keep in mind that the debugs can be quite chatty and significant NHRP traffic may cause the debugs to impact the router performance.
HTH,
Frank

DMVPN NHRP error indication logs

I am seeing a ton of these entries one of my spoke routers.. the hub router IP is 10.1.2.1 and all the dst IP's are not in use so I can't figure out why the spoke router is sending packets to 10.1.2.3, 10.1.2.44, 10.1.2.47 and so-o and those IP's are not in use in my environment.
Its dropping packets across the tunnel constantly and I can't figure out why. Does anyone have an idea of what is happening?
Oct 29 20:05:13.544 IST: %NHRP-3-PAKERROR: Received Error Indication from 10.1.2.1, code: protocol generic error(7), (trigger src: 10.1.2.192 (nbma:28.28.45.45) dst: 10.1.2.3), offset: 0, data: 00 01 08 00 00 00 00 00 00 FF 00 58 F3 2C 00 34
Oct 29 20:05:18.572 IST: %NHRP-3-PAKERROR: Received Error Indication from 10.1.2.1, code: protocol generic error(7), (trigger src: 10.1.2.192 (nbma:28.28.45.45) dst: 10.1.2.44), offset: 0, data: 00 01 08 00 00 00 00 00 00 FF 00 58 F2 F2 00 34
Oct 29 20:05:23.777 IST: %NHRP-3-PAKERROR: Received Error Indication from 10.1.2.1, code: protocol generic error(7), (trigger src: 10.1.2.192 (nbma:28.28.45.45) dst: 10.1.2.47), offset: 0, data: 00 01 08 00 00 00 00 00 00 FF 00 58 F2 ED 00 34
Oct 29 20:05:30.181 IST: %NHRP-3-PAKERROR: Received Error Indication from 10.1.2.1, code: protocol generic error(7), (trigger src: 10.1.2.192 (nbma:28.28.45.45) dst: 10.1.2.46), offset: 0, data: 00 01 08 00 00 00 00 00 00 FF 00 58 F2 EC 00 34
Oct 29 20:05:36.638 IST: %NHRP-3-PAKERROR: Received Error Indication from 10.1.2.1, code: protocol generic error(7), (trigger src: 10.1.2.192 (nbma:28.28.45.45) dst: 10.1.2.7), offset: 0, data: 00 01 08 00 00 00 00 00 00 FF 00 58 F3 26 00 34
Oct 29 20:05:42.842 IST: %NHRP-3-PAKERROR: Received Error Indication from 10.1.2.1, code: protocol generic error(7), (trigger src: 10.1.2.192 (nbma: 28.28.45.45) dst: 10.1.2.34),
This is the tunnel config on the spoke itself, granted I have another tunnel (different ISP) on this spoke going to another hub and I do not see these error messages on that tunnel.

All,
Here's a quick blurb from a document I've been working on which helps to explain this specific error message:
An error code of 7 will be returned by the NHS when an error occurs when processing the packet which is not associated with any of the other NHRP error codes. According to RFC2332, triggers for the error code include invalid version numbers, invalid protocol types, and failed checksums. This error is commonly seen if the NHS receives a Resolution Request for an IP address which it does not have an entry for in its NHRP cache. For example, if a DMVPN spoke tries to send traffic to a spoke IP address which is not registered with the hub, the hub will return an NHRP Error Indication with the Protocol Generic Error specified.
To troubleshoot this condition, you should collect the following on both the hub and spoke routers:
show ip nhrp
debug nhrp
debug nhrp packet
Collecting the debugs will show you the exact NHRP packets which are being sent and received, which may give you an indicate as to what is prompted these errors to be return. Keep in mind that the debugs can be quite chatty and significant NHRP traffic may cause the debugs to impact the router performance.
HTH,
Frank

RS232 Comms Error Indication

Hi all, new to the site so please forgive me for any question that seems obvious or child’s play Basically the problem I have is that sometimes I loose communication between my FieldPoint FP-1000 and LabView. When I say I loose comms, the Network and Access LED on the FP are still flashing away but all the values on the screen go to zero. It is not a set time when it will do this, it is random and ive only had it once where the values came back briefly then went again Ive checked the port using 'Hyperterminal' as described in the NI help section and the port appears OK. Also all Baud rates have been checked Does anybody know what the FP-1000 does if it has a comms error or does it even have that error code available to display? Its just strange that the port is ok and the network and access LED's appear to still be transmitting and the DAQ on LabView is still receiving messages so to me the FP seems ok?
Ive got a programme called Portmon on Cd which ive been advised to use to check the status of the port when it goes down, unless you have any sugegstions before I try it? Many thanks in advance, any ideas or suggestions are welcome and greatly appreciated Regards Mitch

Hi Mitch,
Please can you test the comms connection with some of the example programs shipped with LabVIEW. The ones I am thinking of are located in the LabVIEW Example Finder (Open LabVIEW goto Help >> Find Examples)
From the Example Finder go to Hardware I/O >> FieldPoint >> Getting Started >> Analog Input.vi
This will let you quickly and easily test the comms on the FieldPoint. It will also show you how to use the FP Read vi.
Regards
JamesC
NIUK and Ireland
It only takes a second to rate an answer

How do I fix the error indication '(-42 032) "?

Hey people.
My problem is that iTunes always displays an error and that (-42 032).
What a mistake that should be and how do I fix it?

Generally means your phone was jailbroken & thus the update/restore process has failed...as Apple has warned. If that's the case, there is no support for jailbroken iPhones here, per this forum's terms of use.

When I share a video, «waiting or error» indication appear and it export!! help

when i try to share a video, with youtube, export, and other option, the same thing happens each time, it never starting to process the export, we can only see waiting or error!! Please help me, the video is due for a client tomorrow!! thankss

Since you first installed FCPX have you ever been able to export your movies?
Does this happen for all of your projects on just this one?
Can you export by selecting Export Media?
Russ

Error while posting payroll results to FI

Hi,
I am running India Payroll on ECC 6.0.
I am getting the following error while generating simulation document through Posting Run.
Error in document: HRPAY 0000000060 WPRCLNT100
Text Not Found. Message Number: ZKV 000 Variable:
Payroll run is successful and there is no error indication in any of the line items of the document generated.
At the end of the line items list, the above error is displayed and the document is in "Incorrect" status.
I tried live run also. I am getting the same error in the document generated and not able to post to FI subsequently.
Please help to rectify the error.
Regards,
Hema

Hi,
Thanks for the reply.
The interesting part is, it is a standard message and there is no message class ZKV available in the system. We have gone live only six months back and not done a single enhancement in HR module till now.
As far as FICO is concerned, we have an internal control that we will not enhance any of the FI transactions in view of data accuracy and integrity. We don't have enhancements running in FI & CO modules also.
I am sure that it is a standard message. This message is arising out of the function module 'AC_DOCUMENT_CREATE' called internally in the program associated with posting run transaction.
Please hint, what could be the problem.
Regards,
Hema

Dreamweaver CS6 and Coldfusion 9 - Syntax Errors & Code Coloring

I recently purchased Dreamweaver CS6.
Also, I'm running Coldfusion 9 on Windows 7, but that's probably irrelevant.
The issue is that Dreamweaver keeps on marking my files with syntax errors, and the code coloring gets all messed up.
For instance, such function would indicate an error due to the #var#:
<cfoutput><script>functionXYZ(#var#);<script><cfoutput>
But this would work just fine:
<script>functionXYZ(<cfoutput>#var#<cfoutput>);<script>
The issue is that I have entire pages wrapped in cfoutput, redoing everything would take months.
Or this would break the code coloring for the entire select as such:
<select <cfif test eq 'test'>class="test"</cfif> name="selectbox">
While this breaks the code coloring for the closing cfif as such:
<select class="<cfif test eq 'test'>test</cfif>" name="selectbox">
I'm getting syntax errors on thousands of my files, I understand that I could rewrite the code slightly to remove some of the error indications, but these are not actual errors so I feel that there is no point of me spending months updating the code.
Is there a patch that I can apply so that this would work without any of these issues?
Can someone please help?

Have you posted this question in the Cold Fusion Forums?
http://forums.adobe.com/community/coldfusion
I don't use CF myself and the few CF coders I know have long since moved to Eclipse/ColdFusion Builder.
Nancy O.

Google Sitemap Generator "Error"

Hi,
When I click the ""Create Sitemap" button in the Google Sitemap Generator, 4 pages appear as correct; complete with title & description/keyword info.
However, one page ("The Music...") appears with an ERROR indication stating:
Ambiguous Redirect. Link at http://www.music4yourevent.com/About%20Me.html
It says that there is no description for this page (though I have edited it identically to the other pages using TextEdit).
...and the box for this page is automatically unchecked
I have no idea what to do about this (or if it is even important).
Any advice?!
Thanks! Wm
iMac G5 Mac OS X (10.4.7) Logic Pro 7, MOTU 828, Kurzweil... iLife '06

Hi Max,
That seems to have solved all problems! (I changed it to "The Music" in iWeb.)
Thanks!

Runtime Error R6025 and DAQ-Driver

Operating System Windows2000
Teststand  Version 3.0
DAQ-Driver  6.9.3f5
Serial Driver  1.7
LabvIEW RTE build with LabVIEW 6.1
hello,
we have build a testsytem based on LabVIEW and Teststand.
We use the NI-PCI boards 6713, RS232/16 and MIO-164E. We dont use any operator interface, only the
original Teststand sequence-Editor and the Single-Pass Prozess-model.
It works very fine for e.g. a whole week running and then
,suddenly, the ERROR Window pops up :
"Window-Head: Microsoft Visual c++ Runtime Library
RUNTIME ERROR
Programm ...\National Instruments\Teststand3.0\Bin\SeqEdit.exe
R6025
- pure virtual function call"
After pressing the OK-Button, the Computer will boot and generate a memory-dump.
We have analyzed the dump-file with the Microsoft WINdbg Tool.
The Bugcheck Analysis reported an error with the Nidaq32k-Driver !!
What should/can we do ?
See below the analysis report:
Debugging Details:
*** ERROR: Symbol file could not be found. Defaulted to export symbols for Nidaq32k.SYS -
OVERLAPPED_MODULE: kmixer
FAULTING_IP:
Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
bc4370a0 c745fcffffffff   mov     dword ptr [ebp-0x4],0xffffffff
DEFAULT_BUCKET_ID: INTEL_CPU_MICROCODE_ZERO
BUGCHECK_STR: 0xCB
LAST_CONTROL_TRANSFER: from 804bce30 to 80440665
STACK_TEXT:
bc175c54 804bce30 80064bd4 00000000 804bd199 nt!MmCleanProcessAddressSpace+0x421
bc175d04 804bd1b3 00000000 84973a28 80431261 nt!PspExitThread+0x4e1
bc175d10 80431261 84973a28 bc175d48 bc175d3c nt!PsExitSpecialApc+0x1a
bc175d4c 80465bfa 00000001 00000000 bc175d64 nt!KiDeliverApc+0x158
bc175d4c 77e017da 00000001 00000000 bc175d64 nt!KiServiceExit+0x58
WARNING: Frame IP not in any known module. Following frames may be wrong.
0012f7a4 00000000 00000000 00000000 00000000 0x77e017da
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
bc4370a0 c745fcffffffff   mov     dword ptr [ebp-0x4],0xffffffff
FOLLOWUP_NAME: MachineOwner
SYMBOL_NAME: Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
MODULE_NAME: Nidaq32k
IMAGE_NAME: Nidaq32k.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 3f39592e
FAILURE_BUCKET_ID: 0xCB_Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
BUCKET_ID: 0xCB_Nidaq32k!mdsSimpleDIGPortPrimitive::_accessCheck+600
Followup: MachineOwner

hello,
unfortunately the msiBlast tool dont indicate the LV RTE 6.0 !, too.
See attachment .pdf file for all installed applications
So it seems to be a other problem of the MAX Version 3.0, showing a LV RTE, which does not exists.
(The expected folder ...\shared\LabVIEW Run-time\6.0 is not present, too.)
Nevertheless i dont have any idea to solve the problem with the R6025 Error ?
Note: In case of manually killing the LV TS RTE within the windows system control (testsequence is running) , a blue screen with error indication for nidaq32k.sys arises !?
regards
Attachments:
msiblast-all.pdf ‏18 KB

JDeveloper tags action method as error

I have a JSF backing bean - tvApplicationDetail - whose class - TVApplicationDetail - is derived from another class - ApplicationDetail. ApplicationDetail has several action methods - e.g., discardChanges. When I use the following EL expression:
<af:commandButton .... action="#{tvApplicationDetail.discardChanges}" ... />
JDeveloper thinks discardChanges() is not a valid method in tvApplicationDetail, so it underscores the EL expression in red, and displays an error indicator on the status bar.
Although the page works fine, the (incorrect) error indication is kind of annoying. It would be nice if JDeveloper looked up the action method in the entire class hierarchy.

What is the message of this PropertyNotFoundException?

Transport-level error has occurred...No Process is on the other end of the pipe upon first ExecuteQuery() after successful connect.

I’m running MS SQL Server 2005, Express Edition, SP3 on Windows XP. Local connections only.
In preparation to restore a database, I use IWSQLDMOServer::KillProcesses() to allow the database restore. (IWSQLSMOResore::SQLRestore()) The restore is successful and I appear to be able to connect OK. (No error indication on the
connect) However, the first time I try to use the database via an ExecuteQuery() the call fails and the connection state is changed to Closed. I also get the “Transport-level error has occurred...No Process is on the other end of the pipe” exception.
Closing and restarting the application fixes the problem.
Also, disconnecting and reconnecting twice before the ExecuteQuery() call also fixes the problem.
So, I can hide the problem by connecting twice, but I am hoping there is a better solution.
Walter Eykel

It appers when you connect for the restore process, you are opening a different session than that of the original one, with a different database context.
The first time you try to execute a query, you attempt to use the session that was open BEFORE the KillProcesses() call and therefore was killed. By the time you run the first time, your client is informed that the previous session is no longer available.
In the second time, as your client was informed that the original session was killed, it opens a new one.
Its the same behavior as in SSMS.
As a workaround, you could change your database context of your
current session to a base that wont be restored, call the restore methods, and then switch back to the original database context.

How do I keep an error message visible until its fixed?

I would like to validate a textinput field and have the red
boxed error message stay resident on the screen next to the field
until the data is fixed. Currently, once you move the mouse out of
the field the message goes away. I want it to stay on the screen.
Thanks
Tony

I dont know for sure but here is an idea.
When you set the errorString, set the tooltip hide delay to
Infinity using ToolTipManager.hideDelay = Infinity. This will show
the tooltip forever. Upon error fixing set errorString to empty and
redefine the hideDelay to whatever your default is (eg 1000 for 1
sec).
This will of course mess up your normal control tooltips. But
if you are not using tooltips for any other purpose except error
indication, this might work.
Thanks
Rahil

Annoying page errors

i keep getting these pages whenever i try to do work, like yahoo, google, etc. it goes like this
"http://urlseek40.vmn.net/search.php?lg=en&type=dns&tbn"....such and such.
its getting VERY ANNOYING. it keeps doing that while im checking my email, sending in homework all which is very important and it's frustrating.
also fix this adobe flash player crashing stuff. i'd like to watch vids that would last at least 3 minutes before crashing.

Everything would be the browser dialog if not for servers at the site providing their own page some funny, some informative
* https://support.mozilla.com/en-US/questions/4040404040
* file:///c:/notfound/notfound.html
* 60 Really Cool and Creative Error 404 Pages<br>http://www.hongkiat.com/blog/60-really-cool-and-creative-error-404-pages/
* Funny 404 Pages fab 404 Error Page Gallery<br>http://fab404.com/
Because I have the "Resurrect" extension the file:///c:/ error above results in a page from that extension, allowing me to look in several archive or search cached pages -- it is on my computer not a a page that gets downloaded from some site.
Then there is the dishonest practice of domain name providers and ISPs providing "helpful information" (advertisements) that slow things down with their own pages.
For my ISP I simply intercept their page via the hosts file so I get a true error indication, so it never gets loaded and I can continue on faster.
Not found 404 error pages - MozillaZine Knowledge Base
:http://kb.mozillazine.org/Not_found_404_error_pages

Ref cursors and dynamic sql..

I want to be able to use a fuction that will dynamically create a SQL statement and then open a cursor based on that SQL statement and return a ref to that cursor. To achieve that, I am trying to build the sql statement in a varchar2 variable and using that variable to open the ref cursor as in,
open l_stmt for refcurType;
where refcurType is a strong ref cursor. I am unable to do so because I get an error indication that I can not use strong ref cursor type. But, if I can not use a strong ref cursor, I will not be able to use it to build the report based on the ref cursor because Reports 9i requires strong ref cursors to be used. Does that mean I can not use dynamic sql with Reports 9i ref cursors? Else, how I can do that? Any documentation available?

Philipp,
Thank you for your reply. My requirement is that, sometimes I need to construct a whole query based on some input, and sometimes not. But the output record set would be same and the layout would be more or less same. I thought ref cursor would be ideal. Ofcourse, I could do this without dynamic SQL by writing the SQL multiple times if needed. But, I think dynamic SQL is a proper candidate for this case. Your suggestion to use lexical variable is indeed a good alternative. In effect, if needed, I could generate an entire SQL statement and place in some place holder (like &stmt) and use it as a static SQL query in my data model. In that case, why would one ever need ref cursor in reports? Is one more efficient over the other? My guess is, in the lexical variable case, part of the processing (like parsing) is done on the app server while in a function based ref cursor, the entire process takes place in the DB server and there is probably a better chance for re-use(?)
Thanks,
Murali.

Error indication

Similar Messages

Maybe you are looking for