Error installing a package using yaourt

Not sure if this is the place to post this or not. My previous experience with yaourt (before my HD died and I had to reinstall), I didn't have this issue, and I wasn't able to find any references to this in the wiki, forum, or on the yaourt page (both the usage page and the AUR listing). I run yaourt as follows:
$ yaourt -Syv --aur pacman-color
and I get the following error:
/usr/bin/pacman: unrecognized option '--aur'
is there something I'm missing? I tried moving the --aur to various places, like before the -Syv, or after pacman-color, but it resulted in the same error. I'm using the current yaourt and package-query (as of tonight), and pacman 3.4.0. Thanks in advance for any help.
David
[email protected]

I've installed yaourt and '-Syu' seems to work while '-Syv' returns an error. 'pacman -Syv' works.
[karol@black test]$ yaourt -Sy --aur
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
Last edited by karol (2010-07-15 06:32:49)

Similar Messages

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error Installing with Package from CCP

Hi,
Apologies if there's a CCP board; I didn't see it in the menu.
I used Creative Cloud Packager to make a package of apps for Mac.
Installing the package using Apple Remote Desktop returns ".. could not be installed. Error message: "Running package scripts...""
When I run it locally on any machine (10.6 or 10.9), it responds with this error:
The installation progress slows to a crawl about 3/4 of the way through "Running package scripts..." then after a few minutes returns "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
Nothing relevant seems to appear in the console log.
Anyone have any ideas?
Thanks,
Jeff

Im having EXACTLY the same problem
After installing a new package ONCE, if I then try to re-install the same package again it fails half way through the install on second install atempts on a new Mac
its a nightmare because I REALLY need a stable package to deploy accross many macs in our business,
ADOBE PLEASE sort this out this is a MAJOR problem for your customers

The installer has encountered an unexpected error installing this package F-Secure Client Security

Hello there : whe just buy a T61 after windows xp finish install i try to install F-Secure Client Security and the install fails i log the following : i try almost everything , can some one help?
MSI (c) (D4:10) [14:19:03:929]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
=== Logging started: 21-08-2008 14:19:03 ===
Action start 14:19:03: INSTALL.
Action start 14:19:03: LaunchConditions.
Action ended 14:19:03: LaunchConditions. Return value 1.
Action start 14:19:03: PrepareDlg.
Info 2898. DlgFont8, Tahoma, 1
Info 2898. VerdanaBold13, Verdana, 1
DEBUG: Error 2826: Control BottomLine on dialog PrepareDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: PrepareDlg, BottomLine, to the right
Action ended 14:19:04: PrepareDlg. Return value 1.
Action start 14:19:04: FindRelatedProducts.
Action ended 14:19:04: FindRelatedProducts. Return value 1.
Action start 14:19:04: AppSearch.
Action ended 14:19:04: AppSearch. Return value 1.
Action start 14:19:04: CCPSearch.
Action ended 14:19:04: CCPSearch. Return value 1.
Action start 14:19:04: RMCCPSearch.
Action ended 14:19:04: RMCCPSearch. Return value 0.
Action start 14:19:04: ValidateProductID.
Action ended 14:19:04: ValidateProductID. Return value 1.
Action start 14:19:04: CostInitialize.
MSI (c) (D4:10) [14:19:04:049]: Baseline: Sorting baselines for {B5DF29E9-885D-4FD0-B62D-33615AC65A53}.
MSI (c) (D4:10) [14:19:04:049]: Baseline: New baseline 7.11.0 from transaction.
MSI (c) (D4:10) [14:19:04:049]: Baseline: Sorted order Native: Order 0.
MSI (c) (D4:10) [14:19:04:049]: Baseline Data Table:
MSI (c) (D4:10) [14:19:04:049]: ProductCode: {B5DF29E9-885D-4FD0-B62D-33615AC65A53} Version: 7.11.0 Attributes: 0 PatchId: Native BaselineId: -2147483648 Order: 0
MSI (c) (D4:10) [14:19:04:049]: Baseline File Table:
Action ended 14:19:04: CostInitialize. Return value 1.
Action start 14:19:04: FileCost.
Action ended 14:19:04: FileCost. Return value 1.
Action start 14:19:04: IsolateComponents.
Action ended 14:19:04: IsolateComponents. Return value 1.
Action start 14:19:04: CostFinalize.
Action ended 14:19:04: CostFinalize. Return value 1.
Action start 14:19:04: MigrateFeatureStates.
Action ended 14:19:04: MigrateFeatureStates. Return value 0.
Action start 14:19:04: WelcomeDlg.
DEBUG: Error 2826: Control BottomLine on dialog WelcomeDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: WelcomeDlg, BottomLine, to the right
Info 2898. DlgFontBold8, Tahoma, 1
DEBUG: Error 2826: Control BannerBitmap on dialog VerifyReadyDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: VerifyReadyDlg, BannerBitmap, to the right
DEBUG: Error 2826: Control BottomLine on dialog VerifyReadyDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: VerifyReadyDlg, BottomLine, to the right
DEBUG: Error 2826: Control BannerLine on dialog VerifyReadyDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: VerifyReadyDlg, BannerLine, to the right
Action ended 14:19:05: WelcomeDlg. Return value 1.
Action start 14:19:05: ProgressDlg.
DEBUG: Error 2826: Control BannerBitmap on dialog ProgressDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: ProgressDlg, BannerBitmap, to the right
DEBUG: Error 2826: Control BottomLine on dialog ProgressDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: ProgressDlg, BottomLine, to the right
DEBUG: Error 2826: Control BannerLine on dialog ProgressDlg extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: ProgressDlg, BannerLine, to the right
Action ended 14:19:06: ProgressDlg. Return value 1.
FE7CFB0F8FC9EE44190B518848DC785C
MSI (s) (64:9C) [14:19:22:948]: Using cached product context: machine assigned for product: FE7CFB0F8FC9EE44190B518848DC785C
MSI (s) (64:9C) [14:19:24:572]: Enabling baseline caching for this transaction since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor update patch is active
Action start 14:19:24: INSTALL.
Action start 14:19:24: LaunchConditions.
Action ended 14:19:24: LaunchConditions. Return value 1.
Action start 14:19:24: FindRelatedProducts.
Action ended 14:19:24: FindRelatedProducts. Return value 0.
Action start 14:19:24: AppSearch.
Action ended 14:19:24: AppSearch. Return value 0.
Action start 14:19:24: CCPSearch.
Action ended 14:19:24: CCPSearch. Return value 0.
Action start 14:19:24: RMCCPSearch.
Action ended 14:19:24: RMCCPSearch. Return value 0.
Action start 14:19:24: ValidateProductID.
Action ended 14:19:24: ValidateProductID. Return value 1.
Action start 14:19:24: CostInitialize.
MSI (s) (64:9C) [14:19:24:662]: Baseline: Sorting baselines for {B5DF29E9-885D-4FD0-B62D-33615AC65A53}.
MSI (s) (64:9C) [14:19:24:662]: Baseline: New baseline 7.11.0 from transaction.
MSI (s) (64:9C) [14:19:24:662]: Baseline: Sorted order Native: Order 0.
MSI (s) (64:9C) [14:19:24:662]: Baseline Data Table:
MSI (s) (64:9C) [14:19:24:662]: ProductCode: {B5DF29E9-885D-4FD0-B62D-33615AC65A53} Version: 7.11.0 Attributes: 0 PatchId: Native BaselineId: -2147483648 Order: 0
MSI (s) (64:9C) [14:19:24:662]: Baseline File Table:
MSI (s) (64:9C) [14:19:24:662]: Dumping __MsiPatchMedia table...
MSI (s) (64:9C) [14:19:24:662]: Delta compression fallback method for this product transaction is 'MSI 2.0 legacy obsolescence'
Action ended 14:19:24: CostInitialize. Return value 1.
Action start 14:19:24: FileCost.
Action ended 14:19:24: FileCost. Return value 1.
Action start 14:19:24: IsolateComponents.
Action ended 14:19:24: IsolateComponents. Return value 1.
Action start 14:19:24: CostFinalize.
Action ended 14:19:24: CostFinalize. Return value 1.
Action start 14:19:24: SetODBCFolders.
Action ended 14:19:24: SetODBCFolders. Return value 1.
Action start 14:19:24: MigrateFeatureStates.
Action ended 14:19:24: MigrateFeatureStates. Return value 0.
Action start 14:19:24: InstallValidate.
Action ended 14:19:24: InstallValidate. Return value 1.
Action start 14:19:24: InstallInitialize.
Action ended 14:19:29: InstallInitialize. Return value 1.
Action start 14:19:29: AllocateRegistrySpace.
Action ended 14:19:29: AllocateRegistrySpace. Return value 1.
Action start 14:19:30: ProcessComponents.
Action ended 14:19:30: ProcessComponents. Return value 1.
Action start 14:19:30: UnpublishComponents.
Action ended 14:19:30: UnpublishComponents. Return value 1.
Action start 14:19:30: MsiUnpublishAssemblies.
Action ended 14:19:30: MsiUnpublishAssemblies. Return value 0.
Action start 14:19:30: UnpublishFeatures.
Action ended 14:19:30: UnpublishFeatures. Return value 1.
Action start 14:19:30: StopServices.
Action ended 14:19:30: StopServices. Return value 1.
Action start 14:19:30: DeleteServices.
Action ended 14:19:30: DeleteServices. Return value 1.
Action start 14:19:30: UnregisterComPlus.
Action ended 14:19:30: UnregisterComPlus. Return value 1.
Action start 14:19:30: SelfUnregModules.
Action ended 14:19:30: SelfUnregModules. Return value 1.
Action start 14:19:30: UnregisterTypeLibraries.
Action ended 14:19:30: UnregisterTypeLibraries. Return value 1.
Action start 14:19:30: RemoveODBC.
Action ended 14:19:30: RemoveODBC. Return value 1.
Action start 14:19:30: UnregisterFonts.
Action ended 14:19:30: UnregisterFonts. Return value 1.
Action start 14:19:30: RemoveRegistryValues.
Action ended 14:19:30: RemoveRegistryValues. Return value 1.
Action start 14:19:30: UnregisterClassInfo.
Action ended 14:19:30: UnregisterClassInfo. Return value 1.
Action start 14:19:30: UnregisterExtensionInfo.
Action ended 14:19:30: UnregisterExtensionInfo. Return value 1.
Action start 14:19:30: UnregisterProgIdInfo.
Action ended 14:19:30: UnregisterProgIdInfo. Return value 1.
Action start 14:19:30: UnregisterMIMEInfo.
Action ended 14:19:30: UnregisterMIMEInfo. Return value 1.
Action start 14:19:30: RemoveIniValues.
Action ended 14:19:30: RemoveIniValues. Return value 1.
Action start 14:19:30: RemoveShortcuts.
Action ended 14:19:30: RemoveShortcuts. Return value 1.
Action start 14:19:30: RemoveEnvironmentStrings.
Action ended 14:19:30: RemoveEnvironmentStrings. Return value 1.
Action start 14:19:30: RemoveDuplicateFiles.
Action ended 14:19:30: RemoveDuplicateFiles. Return value 1.
Action start 14:19:30: RemoveFiles.
Action ended 14:19:30: RemoveFiles. Return value 1.
Action start 14:19:30: RemoveFolders.
Action ended 14:19:30: RemoveFolders. Return value 1.
Action start 14:19:30: CreateFolders.
Action ended 14:19:30: CreateFolders. Return value 1.
Action start 14:19:30: MoveFiles.
Action ended 14:19:30: MoveFiles. Return value 1.
Action start 14:19:30: InstallFiles.
MSI (s) (64:9C) [14:19:30:150]: Dumping binary patch manager data...
MSI (s) (64:9C) [14:19:30:150]: The file represented by File table key 'ILAUNCHR.CFG' has no eligible binary patches
MSI (s) (64:9C) [14:19:30:150]: The file represented by File table key 'fsc_jar.jar' has no eligible binary patches
MSI (s) (64:9C) [14:19:30:150]: The file represented by File table key 'ILAUNCHR.exe' has no eligible binary patches
MSI (s) (64:9C) [14:19:30:150]: The file represented by File table key 'RunSetup.exe' has no eligible binary patches
MSI (s) (64:9C) [14:19:30:150]: The file represented by File table key 'ilwrap.exe' has no eligible binary patches
MSI (s) (64:9C) [14:19:30:150]: Dumping binary patch manager data...
Action ended 14:19:30: InstallFiles. Return value 1.
Action start 14:19:30: PatchFiles.
Action ended 14:19:30: PatchFiles. Return value 1.
Action start 14:19:30: DuplicateFiles.
Action ended 14:19:30: DuplicateFiles. Return value 1.
Action start 14:19:30: BindImage.
Action ended 14:19:30: BindImage. Return value 1.
Action start 14:19:30: CreateShortcuts.
Action ended 14:19:30: CreateShortcuts. Return value 1.
Action start 14:19:30: RegisterClassInfo.
Action ended 14:19:30: RegisterClassInfo. Return value 1.
Action start 14:19:30: RegisterExtensionInfo.
Action ended 14:19:30: RegisterExtensionInfo. Return value 1.
Action start 14:19:30: RegisterProgIdInfo.
Action ended 14:19:30: RegisterProgIdInfo. Return value 1.
Action start 14:19:30: RegisterMIMEInfo.
Action ended 14:19:30: RegisterMIMEInfo. Return value 1.
Action start 14:19:30: WriteRegistryValues.
Action ended 14:19:30: WriteRegistryValues. Return value 1.
Action start 14:19:30: WriteIniValues.
Action ended 14:19:30: WriteIniValues. Return value 1.
Action start 14:19:30: WriteEnvironmentStrings.
Action ended 14:19:30: WriteEnvironmentStrings. Return value 1.
Action start 14:19:30: RegisterFonts.
Action ended 14:19:30: RegisterFonts. Return value 1.
Action start 14:19:30: InstallODBC.
Action ended 14:19:30: InstallODBC. Return value 0.
Action start 14:19:30: RegisterTypeLibraries.
Action ended 14:19:30: RegisterTypeLibraries. Return value 1.
Action start 14:19:30: SelfRegModules.
Action ended 14:19:30: SelfRegModules. Return value 1.
Action start 14:19:30: RegisterComPlus.
Action ended 14:19:30: RegisterComPlus. Return value 1.
Action start 14:19:30: InstallServices.
Action ended 14:19:30: InstallServices. Return value 1.
Action start 14:19:30: StartServices.
Action ended 14:19:30: StartServices. Return value 1.
Action start 14:19:30: InstallExecute.
Action ended 14:19:32: InstallExecute. Return value 1.
Action start 14:19:32: RunILauncher.
Action ended 14:19:32: RunILauncher. Return value 1.
Action start 14:19:32: RegisterUser.
Action ended 14:19:32: RegisterUser. Return value 1.
Action start 14:19:32: RegisterProduct.
Action ended 14:19:32: RegisterProduct. Return value 1.
Action start 14:19:32: PublishComponents.
Action ended 14:19:32: PublishComponents. Return value 1.
Action start 14:19:32: MsiPublishAssemblies.
Action ended 14:19:32: MsiPublishAssemblies. Return value 0.
Action start 14:19:32: PublishFeatures.
Action ended 14:19:32: PublishFeatures. Return value 1.
Action start 14:19:32: PublishProduct.
Action ended 14:19:32: PublishProduct. Return value 1.
Action start 14:19:32: InstallFinalize.
MSI (s) (64:9C) [14:19:59:637]: Product: F-Secure Client Security -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action RunILauncher, location: C:\Programmer\F-Secure\FSMSI\ilwrap.exe, command: fsc_jar.jar /U /F /ROFTWARE\Data Fellows\F-Secure\ILauncher /C
Action ended 14:19:59: InstallFinalize. Return value 3.
Action ended 14:19:59: INSTALL. Return value 3.
Action ended 14:19:59: ExecuteAction. Return value 3.
Action start 14:19:59: FatalError.
DEBUG: Error 2826: Control BottomLine on dialog FatalError extends beyond the boundaries of the dialog to the right by 7 pixels
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2826. The arguments are: FatalError, BottomLine, to the right
Action ended 14:20:01: FatalError. Return value 2.
Action ended 14:20:01: INSTALL. Return value 3.
=== Logging stopped: 21-08-2008 14:20:01 ===
MSI (c) (D4:10) [14:20:01:594]: Product: F-Secure Client Security -- Installation failed.

Hi nikki7,
Are you using a non-english operating system? If you are, then the KnowledgeBase article I included below should be helpful. I hope this helps!
Error -2705 from the MSI Installer Built with the Visual Studio .NET Installation Builder: http://digital.ni.com/public.nsf/allkb/19CA3B8F15B4FB9386256DDA006DFED8?OpenDocument
Regards,
Jason D
Applications Engineer
National Instruments

The installer has encountered an unexpected error installing this package.This may indicate a problem with this package. The error code is 2869

Hi,
I am getting error "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2869." while installing SAP B1DE.
Note:
Downloaded the B1DE from B1DE:SAP Business One Development Environment Tools
Using Window XP , .Net 2008, SAP B1 8.81 Version
Company Name, Contact Person, Namespace all were given while installing. All of its length is less than 8
Any help is appreciated.
Thanks in advance.
Parvatha Solai.N

Hi,
Try post a comment in B1DE 2.0.1 new version! blog.
Beni.

I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem"

I tried updating iTunes to version 11.1.1, but installation fails each time even when I did it manually as was suggested. The message I receive is: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."

Hi hongkongpom,
Just wanted to say that after posting the problem, I had a chat with an iTunes' Tech Support, her name is Rebekah. My problem was resolved after that. Will list the chat history below in hopes that it may help you as well.
Good luck!
Samia
Chat Transcript
Friday, October 4, 2013 05:55 AM
Duration: 81 minutes 28 seconds
Rebekah:
Welcome to AppleCare chat support. Please give me a moment to look over your information.
Rebekah:
Hi, Samia! My name is Rebekah. If we get disconnected, please chat us back. http://www.apple.com/support/ipod/contactEnter the case number from the initial email we sent you. This gives the next advisor you chat with immediate access to your case history.
Rebekah:
Could you please confirm your serial number? I want to be sure we provide the best service possible for you, Samia!
SAMIA:
Sure, it's 8L8395UY2C5
SAMIA:
My problem is with iTunes.
Rebekah:
Thanks for that confirmation. Just a heads up, this is iOS Tech Support. We do support iPod touches, iPads, and iPhones, but not the iPod classic. But no worries! I can get you in touch with a phone Advisor who can get you in touch with the department that specializes in iPod classics and would be able to better assist you. Would that be OK?
SAMIA:
I wasn't able to install the new version of iTunes (version 11.1.1). The installation keeps failing. The they suggested the I install it manually and that failed too. I will attach the message I received.
SAMIA:
I don't have a problem with iPod.
SAMIA:
Just iTunes
Rebekah:
No problem! We can certainly troubleshoot iTunes as much as possible. It may come to the point that you may have to transferred, but we can do as much as possible during this chat!
Rebekah:
Thanks for the screenshot. It is a bit small so I am unable to fully see the message that you are receiving. What is the error message you are receiving?
SAMIA:
This is the message I received in case you weren't able to open the attachment: "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."
Rebekah:
Thanks for that info!
SAMIA:
Pleasure!
Rebekah:
What version of Windows (XP, Vista, 7) do you have?
SAMIA:
Windows 7
SAMIA:
Windows 7 Home Premium
Rebekah:
Thanks for that confirmation. I do apologize for the delay, Samia. I am researching this error code now. You mentioned trying to install iTunes manually. To be sure I am on the same page, what steps did you take to do that?
SAMIA:
Well when the indsatalltion failed I was given instructions to select Download Only from Tools and then install manually. When I did it, I window popped up with the following items: - AppleApplicationSupport
SAMIA:
- AppleMobileDeviceSupport64
SAMIA:
- Bonjour64
SAMIA:
iTunes64
SAMIA:
SetupAdmin
SAMIA:
I selected Repair in all of them instead of Remove and all worked but iTunes64
SAMIA:
That's when I received the message that I sent you earlier.
SAMIA:
By the way, this is the fir st time something like this occured. I never had problems with installation before.
Rebekah:
I completely understand what you're saying. Since that Repair did not resolve the issue, our best option is to uninstall iTunes and its components and redownload it. To do this, we will follow the steps in this article: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Rebekah:
First, we will want to quit iTunes and/or Apple Software Update if those are open at this time.
SAMIA:
Rebekah, the instructions you gave says, "For Windows XP, follow these steps to remove and reinstall iTunes and other software components for Windows XP."
SAMIA:
I closed all applications
SAMIA:
Also, my iTunes doesn't open anymore after the new failed installation.
Rebekah:
The section that says "For Windows XP…" is in case we opened up the wrong article, as we have the one for Windows Vista, 7, or 8. There is a link to click ("these steps") in those directions that would take us to the article for uninstalling on a Windows XP.
Rebekah:
So no worries! We have the right article!
Rebekah:
On the computer, we will want to click on Start > Control Panel. In Control Panel, we will click the "Uninstall a program" link.
SAMIA:
I thought so after doing a little exploration.
SAMIA:
done
Rebekah:
Alright, we'll want to select iTunes from the list of currently installed programs. Then we will click Uninstall. When asked if you would like to remove iTunes, let's click Yes.
Rebekah:
After the uninstallation is complete, we don't want to restart your computer if you're prompted.
SAMIA:
Done
Rebekah:
Then if you see other iTunes entries on the list, we'll want to remove them the same way.
Rebekah:
Then we will remove all instances of Apple Software Update the same way you removed iTunes.
SAMIA:
Okay, but do I have to remoce iCloud as well?
SAMIA:
Rebekah, I received the same error message again when uninstalling
Rebekah:
We actually do not need to remove iCloud. After the Apple Software Update, we will want to remove all instances of Apple Mobile Device Support
Rebekah:
How strange! Are you able to click past that and allow the process to continue or has it stopped it completely?
SAMIA:
I am unable to uninstall iTunes either
SAMIA:
Stopped completely
SAMIA:
I treied clicking Repair
Rebekah:
Alright, after trying the Repair option, let's see if it will allow us to continue uninstalling or not.
SAMIA:
I tried that but unfortunately, it isn't working. I still get that same message with error code 2324.
Rebekah:
This error code is not something that I am finding in my sources, Samia. So there is a chance that it is being caused with the Windows computer itself. However, I did find a link that may be able to help with uninstalling iTunes from Windows' support site: http://support.microsoft.com/mats/Program_Install_and_Uninstall
SAMIA:
Rebekah, you're a genius! It worked! iTunes is no longer there. What next?
Rebekah:
Awesome! I'm glad that worked!
Rebekah:
To be sure I am on the same page, what was the last component we uninstalled?
SAMIA:
iTunes
SAMIA:
Shall I remove the Apple Application Support, Apple Mobile Device Support, and Apple Software Update
Rebekah:
That is correct! However, we do want to uninstall it in the order I mentioned above. So Apple Software Update first, Apple Mobile Device Support next, and then Apple Mobile Device Support.
SAMIA:
Got it, but is the second one to uninstall Apple Mobile Device Support OR Apple pplication Support?
Rebekah:
The second one is Apple Mobile Device Support.
Rebekah:
The Application Support will be the last component we uninstall.
SAMIA:
Thanks! I'm on it.
SAMIA:
Done! ll 3 are gone, well 4 with iTunes. Now what?
Rebekah:
Awesome! Also, I just noticed that I accidentally typed Apple Mobile Device Support twice, I do apologize for any confusion! Now we will remove all instances of Bonjour and then remove all instances of Apple Application Support.
SAMIA:
There was only 1 instance with Bonjour. I don't know what the instances are for Apple Application Support
Rebekah:
Yes, Bonjour is often only listed once. Is the Apple Application Support listed at all?
SAMIA:
No
SAMIA:
Since I removed it
Rebekah:
Oh, perfect! If it was removed, we should be set!
Rebekah:
We have removed iTunes and its components now! From here, our next step is to restart the computer. Then once you reboot, you can redownload iTunes from apple.com/itunes
Rebekah:
That should allow you to download iTunes!
SAMIA:
Shall I downloaad the latest vesion?
Rebekah:
You will want to first restart the computer as shown in the article. That will ensure that this process goes smoothly and that everything was removed correctly! Then you can try downloading iTunes again.
SAMIA:
Okay, thanks Rebekah!
Rebekah:
You're very welcome! I'm glad I could help! And of course if you have any issue after the reboot and download, you can always chat us back, as chat is open 24 hours! You will just need to give your case number and the next Advisor would have all my notes!
SAMIA:
Thanks again for all your help, for I couldn't have managed with out it. Have a nice day!
Rebekah:
You're very welcome! I know how important iTunes is and I'm glad we could get you on a path to resolution!
Rebekah:
I hope you have a lovely day!
Rebekah:
It's been a pleasure speaking with you! Thanks for chatting with us Samia. If you don't have any more questions, select End Chat from the upper left corner of the chat window.
SAMIA:
Will do, thanks.

I can't install wmpfirefoxplugin at Firefox 4, It show "The installer has encountered an unexpected error installing theis package. This may indicate a problem with this package. The error code is 2755.

The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2755.

Although you're getting a different error message, perhaps try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

[SOLVED]Installing oraclejdk8u20 64bit using yaourt

I installed oraclejdk8u20 using yaourt command. It shows installed as shown belocw in the code.
$ yaourt oraclejdk
1 aur/oraclejdk6-32 6u45-1 (0)
Non-conflicting 32-bit Oracle JDK 6 for servers
2 aur/oraclejdk6-64 6u45-1 (0)
Non-conflicting 64-bit Oracle JDK 6 for servers
3 aur/oraclejdk7-32 7u67-1 (0)
Non-conflicting 32-bit Oracle JDK 7 for servers
4 aur/oraclejdk7-64 7u67-1 (0)
Non-conflicting 64-bit Oracle JDK 7 for servers
5 aur/oraclejdk8-32 8u20-1 (1)
Non-conflicting 32-bit Oracle JDK 8 for servers
6 aur/oraclejdk8-64 8u20-1 [installed] (1)
Non-conflicting 64-bit Oracle JDK 8 for servers
==> Enter n° of packages to be installed (ex: 1 2 3 or 1-3)
==> -------------------------------------------------------
==>
I am unable to use java what to do??
i used the following command to install oraclejdk
yaourt -S oraclejdk8
NOTE: THERE WAS NO PREVIOUS INSTALLATION OF ANY JDK OR JRE ON MY SYSTEM
Last edited by ashhar24 (2014-09-29 21:27:45)

mrunion wrote:When you say you are "unable to use Java", I assume you mean run java apps on your system? Have you rebooted/re-logged out/in/re-sourced environment variables on your system so the Java environment variables can be read? What error(s) are you getting that lead to being "unable to use Java"?
Yeah I restarted but there was no "java" command also I was unable to find where the package was installed, it was neither in /usr or /opt..
EDIT PROBLEM FIXED READ THE PREVIOUS POST

Errors Installing Portal Components using 9iAS Enterprise on 8.1.7 SE

We are getting an error installing the Portal Components using
9iAS Enterprise on a 8.1.7 SE database. The log indicates that
the error is:
ORA-00439: feature not enabled: Function-based indexes
Errors encountered in the Install process. Installation Aborted.
While I know that Function-based indexes are not supported in SE
this should not prevent the installation of Portal.
Does anyone have any suggestions?
Thx, Paul

Its also working in our case where we have used 8.1.7 Enterprise Edition. We installed 9iAS 1.0.2.0 on NT. So if you have any issues regarding this then let me know.

I can longer install software packages using ARD.

I can no longer install software packages to other computers on my local network. I used to do this frequently to four other computers on my network, but no it just gets stuck on "Waiting for item." status. I cannot figure out how to fix this. I have tried all I know: rebooting everything, etc...
Any help would be appreciated. Thanks.

If you can still control and observe these computers, but also can't copy files to them, then this thread might help - the solution by Scooter Magrooter is the best.
https://discussions.apple.com/message/16201614#16201614

Error while downloading libtorrent using yaourt

here is the entire message :
use following PKGBUILD instead, it compiles OK:
# Contributor: Swen Simon <swsimon at gmail dot com>
pkgname=libtorrent-svn
_pkgname=libtorrent
pkgver=1060
pkgrel=1
pkgdesc="BitTorrent library written in C++"
arch=('i686')
url="http://libtorrent.rakshasa.no"
license="GPL"
depends=('libsigc++2.0' 'openssl')
makedepends=('subversion')
md5sums=('d6a3620e85d3504a8bed8c7d00896312')
source=('http://libtorrent.rakshasa.no/attachment/ticket/1266/libtorrent-gcc43-v2.patch?format=raw')
_svnmod="libtorrent"
_svntrunk="svn://rakshasa.no/libtorrent/trunk/$_svnmod"
build() {
cd $startdir/src
msg "Connecting to $_svnmod SVN server...."
svn co $_svntrunk $_svnmod -r $pkgver
msg "SVN checkout done or server timeout"
cd $_svnmod
msg "Starting make..."
./autogen.sh
./configure --prefix=/usr --disable-debug
cat $srcdir/libtorrent-gcc43-v2.patch?format=raw | patch -Np1 || return 1
make || return 1
mkdir -p $startdir/pkg/usr/bin
make DESTDIR=${startdir}/pkg install
First Submitted: Tue, 27 Nov 2007 20:50:57 +0000
Last Updated: (unknown)
libtorrent-svn 995-1 (Unsupported): BitTorrent library written in C++
==> libtorrent-svn dependencies:
- libsigc++2.0 (already installed)
- openssl (already installed)
- subversion (already installed)
==> Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of 'libtorrent-svn'? [Y/n]
==> ----------------------------------------------
==>y
==> Building and installing package
mkdir: cannot create directory `/var/abs/local/yaourtbuild': Permission denied
==> WARNING: Unable to write in /var/abs/local/yaourtbuild/libtorrent-svn directory. Using /tmp directory
==> Determining latest svn revision...
-> Version found: 1060
==> Making package: libtorrent-svn 1060-1 (Sat Jun 21 12:52:16 PDT 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Validating source files with md5sums...
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
==> Connecting to libtorrent SVN server....
Checked out revision 1060.
==> SVN checkout done or server timeout
==> Starting make...
aclocal...
/usr/share/aclocal/libxosd.m4:9: warning: underquoted definition of AM_PATH_LIBXOSD
/usr/share/aclocal/libxosd.m4:9: run info '(automake)Extending aclocal'
/usr/share/aclocal/libxosd.m4:9: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
autoheader...
libtoolize... using libtoolize
automake...
configure.ac:23: installing `./config.guess'
configure.ac:23: installing `./config.sub'
autoconf...
ready to configure
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 98304
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether byte ordering is bigendian... no
checking the byte alignment... none needed
checking for user-defined CXXFLAGS... user-defined "-march=i686 -mtune=generic -O2 -pipe"
checking for TR1 support... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking for epoll support... yes
checking size of long... 4
checking sys/vfs.h usability... yes
checking sys/vfs.h presence... yes
checking for sys/vfs.h... yes
checking sys/statvfs.h usability... yes
checking sys/statvfs.h presence... yes
checking for sys/statvfs.h... yes
checking sys/statfs.h usability... yes
checking sys/statfs.h presence... yes
checking for sys/statfs.h... yes
checking for statvfs... ok
checking if compiler supports __attribute__((visibility("default")))... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for OPENSSL... yes
checking for STUFF... yes
checking for madvise... yes
checking signedness of mincore parameter... unsigned
checking for proper overloaded template function disambiguation... yes
checking if compiler supports __attribute__((unused))... yes
configure: creating ./config.status
config.status: creating libtorrent.pc
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/torrent/Makefile
config.status: creating src/torrent/peer/Makefile
config.status: creating src/torrent/data/Makefile
config.status: creating src/data/Makefile
config.status: creating src/dht/Makefile
config.status: creating src/download/Makefile
config.status: creating src/net/Makefile
config.status: creating src/protocol/Makefile
config.status: creating src/tracker/Makefile
config.status: creating src/utils/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
cd . && /bin/sh /tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent/missing --run aclocal-1.10 -I scripts
/usr/share/aclocal/libxosd.m4:9: warning: underquoted definition of AM_PATH_LIBXOSD
/usr/share/aclocal/libxosd.m4:9: run info '(automake)Extending aclocal'
/usr/share/aclocal/libxosd.m4:9: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
cd . && /bin/sh /tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent/missing --run automake-1.10 --gnu
cd . && /bin/sh /tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent/missing --run autoconf
/bin/sh ./config.status --recheck
running CONFIG_SHELL=/bin/sh /bin/sh ./configure --prefix=/usr --disable-debug CFLAGS=-march=i686 -mtune=generic -O2 -pipe CXXFLAGS=-march=i686 -mtune=generic -O2 -pipe --no-create --no-recursion
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 98304
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether byte ordering is bigendian... no
checking the byte alignment... none needed
checking for user-defined CXXFLAGS... user-defined "-march=i686 -mtune=generic -O2 -pipe"
checking for TR1 support... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking for epoll support... yes
checking size of long... 4
checking sys/vfs.h usability... yes
checking sys/vfs.h presence... yes
checking for sys/vfs.h... yes
checking sys/statvfs.h usability... yes
checking sys/statvfs.h presence... yes
checking for sys/statvfs.h... yes
checking sys/statfs.h usability... yes
checking sys/statfs.h presence... yes
checking for sys/statfs.h... yes
checking for statvfs... ok
checking if compiler supports __attribute__((visibility("default")))... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for OPENSSL... yes
checking for STUFF... yes
checking for madvise... yes
checking signedness of mincore parameter... unsigned
checking for proper overloaded template function disambiguation... yes
checking if compiler supports __attribute__((unused))... yes
configure: creating ./config.status
/bin/sh ./config.status
config.status: creating libtorrent.pc
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/torrent/Makefile
config.status: creating src/torrent/peer/Makefile
config.status: creating src/torrent/data/Makefile
config.status: creating src/data/Makefile
config.status: creating src/dht/Makefile
config.status: creating src/download/Makefile
config.status: creating src/net/Makefile
config.status: creating src/protocol/Makefile
config.status: creating src/tracker/Makefile
config.status: creating src/utils/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
cd . && /bin/sh /tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent/missing --run autoheader
rm -f stamp-h1
touch config.h.in
cd . && /bin/sh ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make all-recursive
make[1]: Entering directory `/tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent'
Making all in src
make[2]: Entering directory `/tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent/src'
Making all in torrent
make[3]: Entering directory `/tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent/src/torrent'
Making all in data
make[4]: Entering directory `/tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent/src/torrent/data'
/bin/sh ../../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../../.. -I. -I./.. -I./../.. -I../../.. -march=i686 -mtune=generic -O2 -pipe -DNDEBUG -fvisibility=hidden -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -MT file_list_iterator.lo -MD -MP -MF .deps/file_list_iterator.Tpo -c -o file_list_iterator.lo file_list_iterator.cc
libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../../.. -I. -I./.. -I./../.. -I../../.. -march=i686 -mtune=generic -O2 -pipe -DNDEBUG -fvisibility=hidden -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -MT file_list_iterator.lo -MD -MP -MF .deps/file_list_iterator.Tpo -c file_list_iterator.cc -fPIC -DPIC -o .libs/file_list_iterator.o
In file included from file_list_iterator.cc:42:
file_list_iterator.h: In member function 'uint32_t torrent::FileListIterator::depth() const':
file_list_iterator.h:64: error: 'abs' is not a member of 'std'
make[4]: *** [file_list_iterator.lo] Error 1
make[4]: Leaving directory `/tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent/src/torrent/data'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent/src/torrent'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-svs/aur-libtorrent-svn/libtorrent-svn/src/libtorrent'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build libtorrent-svn package.

It's old ... but maybe someone will search it. :-)
libtorrent: http://libtorrent.rakshasa.no/attachmen … 3-v2.patch
rtorrent: http://libtorrent.rakshasa.no/attachmen … cc43.patch
Last edited by Misery (2008-08-24 14:52:10)

[SOLVED] How to install aur packages using pacaur

I'm trying to install dwb-git. It installs with no problem with aura, but pacaur gives me problems. If I run pacaur as regular user it will build but will not install and will say permission denied.
If I run pacaur with sudo it will say building packages as root is a bad idea and will quit. The only other possibility I see is running it with --asroot flag which is a really bad idea.
Last edited by bstaletic (2014-06-22 15:02:41)

No, I get the errors I described above.
Here are the outputs:
bstaletic@arch ~ $ pacaur -y dwb-git
:: resolving dependencies...
:: no AUR metadata for dwb-git package
:: looking for inter-conflicts...
AUR Packages (1):
Name Old Version New Version
aur/dwb-git latest
:: Proceed with installation? [Y/n]
:: Retrieving package(s)...
:: View dwb-git PKGBUILD? [Y/n] n
:: View dwb.install script? [Y/n] n
==> Making package: dwb-git 2014.03.04.g5088db1-1 (Sun Jun 22 15:46:30 CEST 2014)
==> Retrieving sources...
-> Cloning dwb git repo...
Cloning into bare repository '/tmp/pacaurtmp-bstaletic/dwb-git/dwb'...
remote: Counting objects: 15056, done.
remote: Compressing objects: 100% (3796/3796), done.
remote: Total 15056 (delta 11190), reused 14783 (delta 10952)
Receiving objects: 100% (15056/15056), 2.63 MiB | 88.00 KiB/s, done.
Resolving deltas: 100% (11190/11190), done.
Checking connectivity... done.
==> Validating source files with md5sums...
dwb ... Skipped
==> Extracting sources...
-> Creating working copy of dwb git repo...
Cloning into 'dwb'...
done.
==> Starting pkgver()...
==> Updated version: dwb-git 2014.06.14.g9f4bdb9-1
==> Sources are ready.
:: Building dwb-git package(s)...
==> Making package: dwb-git 2014.06.14.g9f4bdb9-1 (Sun Jun 22 15:47:05 CEST 2014)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> WARNING: Using existing src/ tree
==> Starting build()...
Build options:
CC = cc
CFLAGS = -march=native -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -Werror=format-security -pipe --ansi -std=c99 -D_POSIX_C_SOURCE=200112L -O2 -g -D_BSD_SOURCE -D_NETBSD_SOURCE -D__BSD_VISIBLE -pthread -I/usr/include/webkitgtk-1.0 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/libsoup-2.4 -I/usr/include/libxml2 -I/usr/include/webkitgtk-1.0 -I/usr/include/p11-kit-1 -I/usr/include/json-c -I/usr/include/libsecret-1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DWITH_LIBSOUP_2_38=1
LDFLAGS = -Wl,-O1,--sort-common,--as-needed,-z,relro -lwebkitgtk-1.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lpangoft2-1.0 -lpango-1.0 -lfontconfig -lfreetype -lsoup-2.4 -ljavascriptcoregtk-1.0 -lgnutls -ljson-c -lsecret-1 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpthread -lm -lX11
CPPFLAGS = -march=native -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -DWITH_LIBSECRET
make[1]: Entering directory '/tmp/pacaurtmp-bstaletic/dwb-git/src/dwb/src/util'
cc convert_transport_security.c
convert_transport_security.c: In function ‘handle_pinsets’:
convert_transport_security.c:256:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
if((name_obj = json_object_object_get(pin_list, "name")) == NULL || !json_object_is_type(name_obj, json_type_string))
^
convert_transport_security.c:263:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
good_hashes = json_object_object_get(pin_list, "static_spki_hashes");
^
convert_transport_security.c:264:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
bad_hashes = json_object_object_get(pin_list, "bad_static_spki_hashes");
^
convert_transport_security.c: In function ‘handle_entries’:
convert_transport_security.c:297:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
if((name_obj = json_object_object_get(entry, "name")) == NULL ||
^
convert_transport_security.c:307:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
json_object *mode = json_object_object_get(entry, "mode");
^
convert_transport_security.c:315:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
json_object *include_subdomains = json_object_object_get(entry, "include_subdomains");
^
convert_transport_security.c:327:9: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
if((entry_pins = json_object_object_get(entry, "pins")) != NULL)
^
convert_transport_security.c: In function ‘parse_json’:
convert_transport_security.c:371:5: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
if((pinsets = json_object_object_get(json, "pinsets")) == NULL || !json_object_is_type(pinsets, json_type_array) ||
^
convert_transport_security.c:380:5: warning: ‘json_object_object_get’ is deprecated (declared at /usr/include/json-c/json_object.h:290) [-Wdeprecated-declarations]
if((entries = json_object_object_get(json, "entries")) == NULL || !json_object_is_type(entries, json_type_array) ||
^
gen hsts_preload.h
/bin/sh: ./convert_transport_security: Permission denied
Makefile:41: recipe for target '../../src/hsts_preload.h' failed
make[1]: *** [../../src/hsts_preload.h] Error 126
make[1]: Leaving directory '/tmp/pacaurtmp-bstaletic/dwb-git/src/dwb/src/util'
Makefile:22: recipe for target 'src/util.subdir-buildfirst' failed
make: *** [src/util.subdir-buildfirst] Error 2
==> ERROR: A failure occurred in build().
Aborting...
:: dwb-git cleaned
bstaletic@arch ~ $ sudo pacaur -y dwb-git
:: resolving dependencies...
:: no AUR metadata for dwb-git package
:: looking for inter-conflicts...
AUR Packages (1):
Name Old Version New Version
aur/dwb-git latest
:: Proceed with installation? [Y/n]
:: Retrieving package(s)...
:: View dwb-git PKGBUILD? [Y/n] n
:: View dwb.install script? [Y/n] n
==> ERROR: Running makepkg as root is a BAD idea and can cause permanent,
catastrophic damage to your system. If you wish to run as root, please
use the --asroot option.
:: Building dwb-git package(s)...
==> ERROR: Running makepkg as root is a BAD idea and can cause permanent,
catastrophic damage to your system. If you wish to run as root, please
use the --asroot option.
:: dwb-git cleaned
I get the same errors with -Sya and -Sa flags.

The installer has encountered an unexpected error installing this package. This may indicate the problem with this package. The error code is 2705.

When I creat setup project in Visual Studio 2005 with only cvirte.msm merge module installer finish the unstallation successfully, however the program asks for MESA.DLL. When the NImesa.msm is added to the installation package the installer fails witht the error code 2705. The exact message is indicated as the "Subject".
How can I overcome the problem?
Solved!
Go to Solution.

Hi nikki7,
Are you using a non-english operating system? If you are, then the KnowledgeBase article I included below should be helpful. I hope this helps!
Error -2705 from the MSI Installer Built with the Visual Studio .NET Installation Builder: http://digital.ni.com/public.nsf/allkb/19CA3B8F15B4FB9386256DDA006DFED8?OpenDocument
Regards,
Jason D
Applications Engineer
National Instruments

Error on SOA packaging using ant

Hi,
Im trying to deploy a SOA composite using Ant scripts. My composite refers to wsdl's present in mds. On trying to compile and package the composite, i get the below error. The same composite gets compiled when i try from JDev, can someone please help in letting me know if any configuration is to be done.
+"+
+[scac] not part of the command.+
+[scac] Error redirected to /var/lib/jenkins/jobs/trunk_build_project_track_SOA/workspace/bpel_scripts/../tmp/SearchService.err+
+[scac] info: Validating composite "/var/lib/jenkins/jobs/trunk_build_project_track_SOA/workspace/SearchMaintenanceApplication/SearchService/composite.xml"+
+[scac] info: Pass+
+[scac] error: location {/ns:composite}(12,61): Parse of component type files failed, check the adf-config.xml file : "*java.lang.NoClassDefFoundError: oracle/security/jps/internal/api/credstore/CredstoreUtil:* oracle/security/jps/internal/api/credstore/CredstoreUtil"+
+[antcall] Exiting /var/lib/jenkins/jobs/trunk_build_project_track_SOA/workspace/bpel_scripts/build.xml.+
+[antcall] Exiting /var/lib/jenkins/jobs/trunk_build_project_track_SOA/workspace/bpel_scripts/build.xml.+
+[antcall] Exiting /var/lib/jenkins/jobs/trunk_build_project_track_SOA/workspace/bpel_scripts/build.xml.+
+"+
Thanks,
Edited by: user526495 on Jul 16, 2012 2:54 PM

Hi,
404 response indicates that soa-infra is not running in the host:port/gdiora001.in.ibm.com, port:7001
Pl make sure that you have soa-infra running in that host/port.
http://host:port/soa-infra
For the logs,
you can find the soa server logs under $DOMAIN_HOME/servers/soa_server1/logs

Better to install PyPI packages using pacman or pip?

In Haskell, I ran into dependency issues when I had xmonad installed using pacman
and other packages installed using cabal.
Might a similar thing happen if I installed some PyPI packages (virtualenv, pymongo)
using pacman instead of pip?
My reason for wanting to install with pacman is that I'd be more likely to keep the
packages up to date - they'd be tied to the rest of my system, and there's no simple
command to upgrade all packages in pip.

IMO, you should choose which method works best for you and stick with it.
If you use a 3rd party package manager, you should stick with it.
Or if you use pacman, you should stick with it.
http://sherlock.heroku.com/blog/2012/04 … -managers/
Towards the end I mention I don't really know much about pip and would investigate on how it works.
But as a general rule, I would say to try out the 3rd party package manager first and see if it works.
I would also recommend doing per user installs (install to $HOME) to keep files managed by pacman separated from files installed with the 3rd party package manager.
Cabal and Gem imo are both superior to using packages provided in the supported repositories for the reasons outlined in my blog post.
Hope this helps.
Cheers!

Error installing a package using yaourt

Similar Messages

Maybe you are looking for