Error installing Oracle Developer 10g R2

First off, please let me know if this is the wrong forum.
I'm trying to install Oracle Dev 10g R2 on a Windows XP SP3 x86 computer, but I'm getting an error every time I start it. We have it extracted to two folders, one for disk 1 and one for disk 2. I go into disk 1, install, and click setup.exe. The command prompt comes up, I can see it say everything passes, then after maybe 10 seconds it crashes while trying to load the Oracle Universal Installer. The error message is: "An unhandled win32 exception occurred in setup.exe [2320]".
I only have Visual Studio 2005 installed right now (we're trying to create a base image to make system deployment easier, and the dev that needs this particular laptop requires a different version of VS than the rest of the devs so I haven't installed 2008 or 2010 yet). Could that be the cause? Does 10g R2 require VS 2008 or 2010 to be installed or something?
Any help would be greatly appreciated.
Steve
Edited by: user13479334 on Dec 14, 2010 12:03 PM

I re-imaged the laptop, and the install went through this time.

Similar Messages

How to install oracle developer 10g on red hat 5.3

Dear forum members,
i have to install oracle developer 10g on red hat 5.3 . I am searching on google and metalink but i did not find any doccument.
If somebody has some material or any doccument for this Installation plz help me.
regards

i have fullfilled pre-requisites to install developer 10g on red hat 4.5
i copy the source in "/var/opt/oracle/" Source is in .cpio format.
i unzip this source with cat Disk1.cpio | cpio -icd.
when i run the runINstaller it cant find /var/opt/oracle/..........Disk1/products.xml file.
when i find this file with command find -name 'products*' or find -name '*.xml'
i cant find products.xml.
is there any problem with source
reply

Error installing oracle developer 10gR 2

hi, i m using vista 32 bit and i want to installl
oracle developer 10g R2....but i got this error
"checking operating system version:must be 5.0,5.1,5.2.........Actual 6.0"
please help me .......who can i get rid of this error.......

The company I work for has not embraced Windows Vista or 7 yet so I have not had the pleasure of installing Oracle Forms on these platforms yet, however, Steve Cosner has a very comprehensive thread on installing Forms on Vista. Check out this thread: Forms 10g installed and running on Windows Vista It should help you with your install. If you have access to Oracle Metalink, check out this article as well: How to Install Developer Suite 10.1.2.3 on Windows Vista [ID 559067.1]
Hope this helps.
Craig...

How to install oracle developer 10g on rhel 5

hi,
i have install oracle database 10g on rhel5 now i want to install developer 10g on this machine so plz send me any link where i can know step by step installation of oracle developer 10g on rhel5.
thanks

superdba wrote:
although i know this forum is related to database but i would also be grateful if u send me the link of right forum.The link?How about the steps, so you can find the right forum regardless of the question?
Start at http://forums.oracle.com (top left of this page)
Scroll down to a relevant category, such as Developer Tools
If the relevant forum is not visible click on 'More' (Forms IS visible)

Error installing oracle infrastructur 10g

operating system: RedHat AS 3.0
The installation hangs every time on 59%.
The error massage is: The OPMN Process Manager failed to start.
I try to start opmn manually : ./opmnctl start
open failed for /oracle/dcm/config/dcm.conf (No such file or directory)
opmnctl: opmn start failed
And I check dcm.conf, it's true no such file there

What version of Application Server Infrastructure are you trying to install? 10.1.2.0.2 or 10.1.4, or older?
1. Have you worked through all pre-requirements stated in the Installation Guide?
2. Did you have any warning in the installer on the Prerequisite Check screen?
3. Check the whole log-out put on the Configuration Assistant screen in the installer
4. Check log-file in $ORACLE_HOME/opmn/logs
5. (don't try to do any manual commands like opmnctl start during the installation)
Regards,
Martin

Oracle Developer 10g

Hi,
I installed Oracle Developer 10g onto my machine but when I opened the Report, it crashes, I then figured out that I need to apply the patch 7047034. But this patch needs to be applied using Opatch.
When I run the opatch, it gives me following error:
The oracle Home is not OUI based home. please give proper oracle home. Opatch returned with error code =1.
please let me know how to resolve this.
thanks

user12294561 wrote:
I managed to resolve this error but now giving error:
Opatch failed because of inventory problem.Please check the log file for details.
Thanks,
Hussein

Pleae help me: I want to install oracle developer on win server 2008

please help me i am try to install oracle developer 10g on win server 2008 but failed because the version of operating system not 5 or 5.1 or 5.2 and it is 6
so i want to install oracle developer 11g on win server 2008 but i am not found oracle developer 11g to download it
please any one help me to solve this problem or help me to find oracle developer 11g
Thank you

Oracle Developler 11g is now called Oracle Fusion Middleware (FMw) 11g and can be downloaded from the Oracle Fusion Middleware Downloads page. You have to download and install WebLogic Server (WLS) 10.3.3 first, then scroll down and download and install Portal, Forms, Reports and Discoverer (11.1.1.3.0).
When you install WLS, make sure you do not run the configuration step. When you install FMw, it will configure the WLS as part of it's configuration step.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Installation of Oracle developer 10g with database 9i in single box

I want to install Oracle developer 10g (Forms/Reports) with oracle database 9i.
Can Forms/Reports 10g servers reside on the same box that holds the database 9i as well?
Please provide me the solution for the same.

Can Forms/Reports 10g servers reside on the
same box that holds the database 9i as well?Yes, just use different Oracle Homes.

Error on installing Oracle Developer Suite 10g (10.1.2.0.2)

I try to install:
Oracle Developer Suite 10g (10.1.2.0.2), and lick on the set up icon. Then
I get error message:
"Actuall checking SWAP space: 1440 MB availabe, 1535 MB required... Failed "
I don't understand what is meant, and how to fix it?
I have C:\ dirve free space 11.1GB, and G:\ drive free space 463 GB. I try to install the package in G: dirve. I use MS Window XP.
Thank you
Alex

Alex-
Increase your Windows paging file by going to Control Panel->System->Advanced(tab)->Performance Settings(button)->Advanced(tab)->Virtual Memory. Change the Initial size to be at least 1535MB.
Dan

How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

Want to install Oracle Developer Suite 10g R2 on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Developer Suite 10 is not certified or supported to be installed on Win7 (64bit). Although it can be done, you will have problems later if you manage to get it installed. If you really want to have it on your Win7 laptop, I encourage you to install "Windows XP Mode", which is part of Windows Virtual PC. This is free to licensed Win7 users (does not apply to Home edition). Refer to the following:
http://windows.microsoft.com/en-US/windows7/install-and-use-windows-xp-mode-in-windows-7

Unable to install Oracle Developer Suite 10g on Windows 7

Hello,
I'm getting the following error message when using OUI on the Specify File Locations screen after providing source and destination:
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.
Anyone else have this happen while trying to install? I see that a few people have been successful in getting it installed. The destination was provided by default as C:\Program Files\Oracle\Inventory.
Any help would be appreciated - thanks in advance.

The Oracle Developer Suite (ODS) 10g is now certified by Oracle for installation on Windows 7 (32-bit). For installation steps, I recommend you take a look at My Oracle Support article: *How to Install Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) [ID 1292919.1]*. There is no need to run the XP-Mode (Virtual PC) of Windows 7 in order to install and use ODS on Windows 7.
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.This error could be caused by many things. I've seen two. The first (as I recall) was caused by an issue with one of the files in the Inventory directory. We were able to get around the issue by deleting a file (I'm sorry, but I don't recall which file or if we simply deleted the directory). I recommend you check with Oracle Support before you delete any files or the directory, however.
The other issue I've seen cause this is "spaces" in the directory path to the installer. This was the most common cause that I've seen. Make sure there are no spaces in the directory path where the installer is located.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to avoid error while install oracle developer suite10g(forms & reports)

hi dear all in recent times i am trying to install oracle developer suite 10g to learn forms and reports in my lap having windows 7 ultimate version ,32 bit,2.56 GB of ram .I downloaded two files ds_windows_x86_101202_disk1 and ds_window_x86_101202_disk2 and i downloaded Oracle universal Installer but i am unable to complete installation process ,When i click on complete(1.11gb) version which include forms,reports,xml,j developer I am facing this type of error message
"Install has encountered an error while attempting to verify your virtual settings.please verify that the sum of the initial sizes of the paging files is at least 256 mb"
Could any one help how to avoid this type of error message ? or else is there any other way to download Oracle forms and reports version

Ok, Oracle Developer Suite (ODS) 10g (Forms/Reports) was not designed for Windows 7. In order to the ODS you must follow these steps for the installation to be successful.
1. You must set the Virtual Memory (VM) size. The Oracle installer can not read Windows Managed VM. See the Microsoft article Change the size of virtual memory for more information on setting the VM size.
2. The Oracle Installer does not recognize the internal version number of Windows 7, so you have to set the compatibility mode on the Setup.exe to Windows XP. Right-Click the SETUP.EXE and select properties. Then click the Compatibility Tab and in the Compatibility Mode area set this to "Run this program in compatibility mode" and select "Windows XP SP3".
3. You must run the ODS setup.exe as the Administrator. Right-click the setup.exe and select "Run as Administrator".
Having done these three steps, your installation should be successful.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7. If possible, Kindly provide me the website link.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.

Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads

Problems installing Oracle Developer Suite 10g in windows 7

Hi Experts;
I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and I couldn't see anything, may be the name is diferent.
Thanks for your help.
Al

First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product. While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit). This is a commonly asked question so a search of the forum would have given you several solutions.
The limitations of the Oracle installer are:
1. You must have Administrator rights to install.
2. Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
3. It's unable to recognize Windows Managed virtual memory.
To get around these limitations you must do the following:
1. Modify your Virtual Memory settings and define a specific Min and Max amount. Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
2. You must run the Oracle installer in compatibility mode for Windows XP. To do this,
- Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
3. While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
Now run the Oracle setup.exe and your installation should succeed.
Craig...

Error installing Oracle Developer 10g R2

Similar Messages

Maybe you are looking for