ERROR INTO clause is expected in SELECT

Hi experts,
on executing the following code on Application Express 4.0.2.00.09. I had the error like below.
declare
xml_Base_No_Gra_Iva number;
xml_Base_Imponible NUMBER;
xml_Base_Imp_Grav NUMBER;
xml_Monto_Iva NUMBER;
xml_Valor_Ret_Iva NUMBER;
xml_Valor_Ret_Renta NUMBER;
xml_Tpld_Cliente VARCHAR2(2);
xml_Id_Cliente VARCHAR2(13);
xml_Tipo_Comprobante VARCHAR2(2);
xml_Numero_Comprobantes NUMBER;
xml_Id_Informante VARCHAR2(19);
begin
select c."Tpld_Cliente" as xml_Tpld_Cliente,
c."Id_Cliente" as xml_Id_Cliente,
c."Tipo_Comprobante" as xml_Tipo_Comprobante,
sum(c."Numero_Comprobantes") as xml_Numero_Comprobantes,
sum(c."Base_No_Gra_Iva") as xml_Base_No_Gra_Iva,
sum(c."Base_Imponible") as xml_Base_Imponible,
sum(c."Base_Imp_Grav") as xml_Base_Imp_Grav,
sum(c."Monto_Iva") as xml_Monto_Iva,
sum(c."Valor_Ret_Iva") as xml_Valor_Ret_Iva,
sum(c."Valor_Ret_Renta") as xml_Valor_Ret_Renta,
c."Id_Informante" as xml_Id_Informante
from "xml_VentasD" b
INNER JOIN "xml_Informante" a ON (b."Id_Informante" = a."Id_Informante")
INNER JOIN "xml_VentasD" c ON (c."Id_Informante" = b."Id_Informante"
and c."Id_VentasD" = b."Id_VentasD"
and c."Tpld_Cliente" = b."Tpld_Cliente"
and c."Id_Cliente" = b."Id_Cliente")
where a."Ruc" =:P12_RUC
and a."Anio" =:P12_ANIO
and a."Mes" =:P12_MES
group by c."Tpld_Cliente", c."Id_Cliente", c."Tipo_Comprobante", c."Id_Informante"
order by c."Tpld_Cliente", c."Id_Cliente";
end;
ORA-06550: line 17, column 8: PLS-00428: an INTO clause is expected in this SELECT statement
Please can you help me?

you declared INTO variables but not using it ...
/* Formatted on 5/2/2013 6:58:55 PM (QP5 v5.185.11230.41888) */
DECLARE
   xml_Base_No_Gra_Iva       NUMBER;
   xml_Base_Imponible        NUMBER;
   xml_Base_Imp_Grav         NUMBER;
   xml_Monto_Iva             NUMBER;
   xml_Valor_Ret_Iva         NUMBER;
   xml_Valor_Ret_Renta       NUMBER;
   xml_Tpld_Cliente          VARCHAR2 (2);
   xml_Id_Cliente            VARCHAR2 (13);
   xml_Tipo_Comprobante      VARCHAR2 (2);
   xml_Numero_Comprobantes   NUMBER;
   xml_Id_Informante         VARCHAR2 (19);
BEGIN
     SELECT c."Tpld_Cliente",
            c."Id_Cliente",
            c."Tipo_Comprobante",
            SUM (c."Numero_Comprobantes"),
            SUM (c."Base_No_Gra_Iva"),
            SUM (c."Base_Imponible"),
            SUM (c."Base_Imp_Grav"),
            SUM (c."Monto_Iva"),
            SUM (c."Valor_Ret_Iva"),
            SUM (c."Valor_Ret_Renta"),
            c."Id_Informante"
       INTO xml_Tpld_Cliente,
            xml_Id_Cliente,
            xml_Tipo_Comprobante,
            xml_Numero_Comprobantes,
            xml_Base_No_Gra_Iva,
            xml_Base_Imponible,
            xml_Base_Imp_Grav,
            xml_Monto_Iva,
            xml_Valor_Ret_Iva,
            xml_Valor_Ret_Renta,
            xml_Id_Informante
       FROM "xml_VentasD" b
            INNER JOIN "xml_Informante" a
               ON (b."Id_Informante" = a."Id_Informante")
            INNER JOIN "xml_VentasD" c
               ON (    c."Id_Informante" = b."Id_Informante"
                   AND c."Id_VentasD" = b."Id_VentasD"
                   AND c."Tpld_Cliente" = b."Tpld_Cliente"
                   AND c."Id_Cliente" = b."Id_Cliente")
      WHERE a."Ruc" = :P12_RUC AND a."Anio" = :P12_ANIO AND a."Mes" = :P12_MES
   GROUP BY c."Tpld_Cliente",
            c."Id_Cliente",
            c."Tipo_Comprobante",
            c."Id_Informante"
   ORDER BY c."Tpld_Cliente", c."Id_Cliente";
END;http://docs.oracle.com/cd/B19306_01/appdev.102/b14261/selectinto_statement.htm

Similar Messages

PL/SQL cursor loop...error INTO clause needed...but multiple rows

Oracle 11gR2 Linux x86_64
Hi all,
I am running the below PL/SQL block but getting the below error. From what I know, the INTO clause can only be used when a single row will be returned. In this case, I know it returns multiple rows, so why is it asking to use the INTO clause?
DECLARE
v_object VARCHAR2(10) := 'TABLE';
v_schema VARCHAR2(30) := 'TEST';
CURSOR tblsze_cur IS
    SELECT table_name
    FROM dba_tables
    WHERE owner='TEST'
    AND table_name IN (
    'T1',
    'T2',
    'T3');
BEGIN
FOR tbl_rec IN tblsze_cur
    LOOP
        select * from
        table(dbms_space.OBJECT_GROWTH_TREND
        (v_schema,tbl_rec.table_name,v_object));
    END LOOP;
END;
select * from table(dbms_space.OBJECT_GROWTH_TREND
ERROR at line 21:
ORA-06550: line 21, column 3:
PLS-00428: an INTO clause is expected in this SELECT statement

Ok, I think I have the TYPES correct...taken from the documentation.
DECLARE
v_object VARCHAR2(10) := 'TABLE';
v_schema VARCHAR2(30) := 'TEST';
TYPE object_growth_trend_row IS RECORD(
    timepoint      TIMESTAMP,
    space_usage    NUMBER,
    space_alloc    NUMBER,
    quality        VARCHAR(20));
TYPE object_growth_trend_table IS TABLE OF object_growth_trend_row;
TYPE nmtbl IS TABLE OF dba_tables.table_name%TYPE;
tname nmtbl;
CURSOR c1 IS
    SELECT table_name
    FROM dba_tables
    WHERE owner='TEST'
    AND table_name IN (
    'T1',
    'T2',
    'T3');
BEGIN
OPEN c1;
FETCH c1 BULK COLLECT INTO tname;
FOR i IN tname.FIRST .. tname.LAST
    LOOP
         select * from (dbms_space.OBJECT_GROWTH_TREND (v_schema, tname, v_object)) INTO object_growth_trend_table;
         DBMS_OUTPUT.PUT_LINE (object_growth_trend_table);
    END LOOP;
CLOSE c1;
END;
select * from (dbms_space.OBJECT_GROWTH_TREND (v_schema,tname,v_object) INTO object_growth_trend_table);
ERROR at line 33:
ORA-06550: line 33, column 55:
PL/SQL: ORA-00907: missing right parenthesis
ORA-06550: line 33, column 9:
PL/SQL: SQL Statement ignored

PLS -00428-- an INTO clause is expected in the SELECT statement

I dnt know what i'm doing wrong with statement, can you help me please.
DECLARE start_date DATE:= to_date('01/09/2006' , 'DD-MON-YYYY');
end_date DATE:= to_date('30/09/2006' , 'DD-MON-YYYY');
BEGIN
SELECT t.SEC_SHORT_NAME, t.SEC_ISIN, t.SEC_NO,t.SEC_NAME, t.TRADE_DATE,
t.PAYMENT_DATE,t.COUNTERPARTY, t.PRICE , t.NOMINAL ,
                    t.TRANSACTION_NO,t.CURRENT_VALUE_PC, t.CURRENT_VALUE_SC, t.PAYMENT_AMOUNT_PC,
                    t.PAYMENT_AMOUNT_SC,
               ct.AMOUNT , ct.CURRENCY,
          sb.BUSINESS_CLASS_LEVEL_2 ,sb.BUSINESS_CLASS_LEVEL_2_NAME,
          sb.BUSINESS_CLASS_LEVEL_3 ,sb.BUSINESS_CLASS_LEVEL_3_NAME,
          sb.BUSINESS_CLASS_LEVEL_4 ,sb.BUSINESS_CLASS_LEVEL_4_NAME,
sb.BUSINESS_CLASS_LEVEL_5 ,sb.BUSINESS_CLASS_LEVEL_5_NAME
from scdat.A_TRANSACTIONS t
INNER JOIN scdat.A_COSTTAX ct
     ON ct.TRANS_REF = t.TRANS_REF
INNER JOIN scdat.A_SECS_BUSINESS_CLASS_TS sb
ON sb.SEC_REF = t.SEC_REF
where t.TRADE_DATE >= to_char(start_date ,'DD-MON-YYYY')
and t.TRADE_DATE < to_char(end_date ,'DD-MON-YYYY')
and ct.COST_NAME = 'Broker commission'
and sb.BUSINESS_CLASS_DEFINITION = 'FTSE';
END;

i think you should have placed your SELECT statement in a cursor variables since you
are using a date range instead of the INTO clause. this is to avoid too many rows error.
DECLARE
Cursor c1(pStartDate Date, pEndDate Date) Is
    SELECT t.SEC_SHORT_NAME,
           t.SEC_ISIN,
           t.SEC_NO,
           t.SEC_NAME,
           t.TRADE_DATE,
           t.PAYMENT_DATE,
           t.COUNTERPARTY,
           t.PRICE,
           t.NOMINAL ,
           t.TRANSACTION_NO,
           t.CURRENT_VALUE_PC,
           t.CURRENT_VALUE_SC,
           t.PAYMENT_AMOUNT_PC,
           t.PAYMENT_AMOUNT_SC,
           ct.AMOUNT,
           ct.CURRENCY,
           sb.BUSINESS_CLASS_LEVEL_2,
           sb.BUSINESS_CLASS_LEVEL_2_NAME,
           sb.BUSINESS_CLASS_LEVEL_3,
           sb.BUSINESS_CLASS_LEVEL_3_NAME,
           sb.BUSINESS_CLASS_LEVEL_4,
           sb.BUSINESS_CLASS_LEVEL_4_NAME,
           sb.BUSINESS_CLASS_LEVEL_5,
           sb.BUSINESS_CLASS_LEVEL_5_NAME
      FROM scdat.A_TRANSACTIONS t
           INNER JOIN scdat.A_COSTTAX ct ON ct.TRANS_REF = t.TRANS_REF
           INNER JOIN scdat.A_SECS_BUSINESS_CLASS_TS sb ON sb.SEC_REF = t.SEC_REF
     WHERE t.TRADE_DATE                >= pStartDate
       AND t.TRADE_DATE                 < pEndDate
       AND ct.COST_NAME                 = 'Broker commission'
       AND sb.BUSINESS_CLASS_DEFINITION = 'FTSE';
start_date     DATE:= to_date('01/09/2006','DD-MON-YYYY');
end_date       DATE:= to_date('30/09/2006','DD-MON-YYYY');
BEGIN
For c1_rec in c1(start_date, end_date) Loop
     dbms_output.put_line('t.SEC_SHORT_NAME: '||t.SEC_SHORT_NAME);
     dbms_output.put_line('t.SEC_ISIN: '||t.SEC_ISIN);
End Loop;
END;

Error PLS-00428: an INTO clause is expected in this SELECT statement

Dear Experts,
I am new PL/SQL Programming
I am trying to run the following query i am getting Error.
Please help me to solve the error.
declare
    var_cd number(20);
begin
if :P1_TYP_CAT is not null then
   select max(CAT_cd + 1) as var_cd from IM_AST_CAT order by CAT_cd;
   insert into IM_AST_CAT (CAT_NM, CAT_CD) values ((upper(:P1_TYP_CAT)),(:var_cd));
else
   RAISE_APPLICATION_ERROR (-20001,'Both department and location must be provided');
end if;
end;

Others have already explained you the cause of the error. You can simplify your code like this.
begin
if :p1_typ_cat is not null then
     insert into im_ast_cat
          cat_nm
        , cat_cd
     select upper(:p1_type_cat)
          , max(cat_cd + 1)
       from im_ast_cat;
else
     raise_application_error (-20001,'Both department and location must be provided');
end if;
end;

INTO clause expected in SELECT statement

Hi all,
I have this pl sql code that errors out:an INTO clause is expected in this SELECT statement.
Code
Declare
prev_col1 FLOAT(10) := 0;
temp3 temp2%rowtype;
Begin
select * from
select col1, col2, col3,
lag(col1,1,0) over(order by rownum) prev_col1
from temp2 where <conditions here> order by col2
where col1- prev_col1 > 10000 and col1>0 and prev_col1>0;
End;
I have tried in vain to use select into, with both the select statements(separately). Please advise.
Basically, I am comparing a field with the previous field and identifying faulty fields. Then I want to replace the faulty field with the previous field.

I have tried this in vain:
Declare
prev_col1 FLOAT(10) := 0;
v_col1 temp2.col1%type;
v_col2 temp2.col2%type;
v_col3 temp2.col3%type;
Begin
select col1, col2, col3, prev_col1 into v_col1, v_col2, v_col3, prev_col1 from
select col1, col2, col3,
lag(col1,1,0) over(order by rownum) prev_col1
from temp2 order by col3
where col1- prev_col1 > 10000 and prev_col1 > 0;
UPDATE temp2 SET col1= prev_col1 WHERE (col1- prev_col1 > 10000 and prev_col1 > 0);
End;
I am only able to update the declared variable:v_col1. How do I update the original value in table temp2?

Problem with a stored procedure (Error(4,1): PLS-00428: an INTO clause..)

Dear Oracle Experts,
I try to use the stored procedure below but get this error :
"Error(4,1): PLS-00428: an INTO clause is expected in this SELECT statement"
I don't have any clue what could be wrong with my syntax. INTO wouldn't make any sense at this task.
Does someone of you know what's wrong with my Procedure ?
Hope someone can help,
best regards,
Daniel Wetzler
create or replace PROCEDURE AnalysisCompatibility (DATEBEGIN timestamp, DATEEND timestamp)
AS
BEGIN
select Fs.*,Vs.Analysispriority,Vs.Compatibility Compatibility from SigFacts Fs
inner Join Variables Vs On
(Fs.Var_Ref=Vs.Var_Ref and Fs.Machines_Ref=Vs.Machines_Ref )
where Fs.DT between DATEBEGIN and DATEEND
and
Vs.AnalysisPriority > 0
or
VS.Compatibility in (6,7,8,9,10,11,13,21,22)
order by Fs.DT,Fs.Machines_Ref desc, Vs.AnalysisPriority;
END AnalysisCompatibility;

I have created a table (ATREPORT.TEST) that has has got the same column name and type of the query output and i still get error message
PLS-00403 -- statement ATreport.TESt cannot be used as an into target, pls help
DECLARE start_date DATE := to_date('01/09/2006' , 'DD-MON-YYYY');
end_date DATE := to_date('30/09/2006' , 'DD-MON-YYYY');
BEGIN
SELECT t.SEC_SHORT_NAME, t.SEC_ISIN, t.SEC_NO,t.SEC_NAME, t.TRADE_DATE,
t.PAYMENT_DATE,t.COUNTERPARTY, t.PRICE , t.NOMINAL ,
                    t.TRANSACTION_NO,t.CURRENT_VALUE_PC, t.CURRENT_VALUE_SC, t.PAYMENT_AMOUNT_PC,
                    t.PAYMENT_AMOUNT_SC,
               ct.AMOUNT , ct.CURRENCY,
          sb.BUSINESS_CLASS_LEVEL_2 ,sb.BUSINESS_CLASS_LEVEL_2_NAME,
          sb.BUSINESS_CLASS_LEVEL_3 ,sb.BUSINESS_CLASS_LEVEL_3_NAME,
          sb.BUSINESS_CLASS_LEVEL_4 ,sb.BUSINESS_CLASS_LEVEL_4_NAME,
sb.BUSINESS_CLASS_LEVEL_5 ,sb.BUSINESS_CLASS_LEVEL_5_NAME
INTO ATREPORT.TEST
from scdat.A_TRANSACTIONS t
INNER JOIN scdat.A_COSTTAX ct
     ON ct.TRANS_REF = t.TRANS_REF
INNER JOIN scdat.A_SECS_BUSINESS_CLASS_TS sb
ON sb.SEC_REF = t.SEC_REF
where t.TRADE_DATE >= to_char(start_date ,'DD-MON-YYYY')
and t.TRADE_DATE < to_char(end_date ,'DD-MON-YYYY')
and ct.COST_NAME = 'Broker commission'
and sb.BUSINESS_CLASS_DEFINITION = 'FTSE';
END;

View Variable for WHERE clause "ORA-06550, INTO clause expected"

Hi Guys,
two questions
1. can a view have variables like:
create view myview
As
myname varchar(5) = bob
select * from mytable where name = myname
2. if so, why does a simple select above cause
the error "ORA-06550, INTO clause expected" ?

Hi,
no so direct is not possible. There are workarounds, see this thread on Asktom: [url http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1448404423206]Parameterized view
Herald ten Dam
http://htendam.wordpress.com

Ive just subscribed online but realised I have the wrong service by mistake... I require Convert PDF into Word doc service but selected Adobe send in error, sorry. Can you please switch the service for me? Thanks Anthony Levy

Ive just subscribed online but realised I have the wrong service by mistake... I require Convert PDF into Word doc service but selected Adobe send in error, sorry. Can you please switch the service for me? Thanks Anthony Levy

Hi Tony,
Please refer this KB document : Return, cancel, or exchange an Adobe order
Please let me know if you need any further assistance.
Regards,
Rahul

Why do I have to use SELECT INTO clause in a Stored Proc ?

Hi,
I'm new to oracle. I've bought Oracle Database 10g SQL and Oracle Database 10 A beginner's Guide, two books from Oracle press but I can't find any answer for that.
Why when I'm writing a Stored Procedure with a SELECT statement do I have to use an INTO clause ?? And why when the select returns more than one row do I have to use a cursor ? By the way is this the only way to return more than one row from a stored procedure ?
Any help will be appreciated.
Regards.
S. Nunes

Sounds like you may have some experience with other databases (SQL Server, maybe?) which allow you to create stored procedures which implicitly return result sets simply by embedding select statements.
In Oracle, the correct way to do this is using ref cursors.
See the following link for a good explanation:
http://osi.oracle.com/~tkyte/ResultSets/index.html

Error Logging Clause & Alternatives

Users want data from an external source validated, and any nonconformities logged. I had hoped to do this via constraints and the error logging clause, and cooked up an example to try things out:
SQL> alter table emp add constraint emp_ck_sal check(sal between 1 and 5000) enable;
Table altered.
SQL> select constraint_name, constraint_type from user_constraints where table_name = 'EMP';
CONSTRAINT_NAME                C
EMP_CK_SAL                     C
PK_EMP                         P
FK_DEPTNO                      R
SQL> exec dbms_errlog.create_error_log('emp', 'bad_emp');
PL/SQL procedure successfully completed.
SQL> insert into emp (empno, ename, job, mgr, hiredate, sal, deptno)
2 select 8001, 'AZIZ', 'CLERK', 7782, sysdate, 1000, 10 from dual
3 union
4 select 8002, 'NG', 'CLERK', 7782, sysdate, 0, 10 from dual
5 union
6 select 8003, 'ASFAW', 'CLERK', 8000, sysdate, 8000, 50 from dual
7 log errors into bad_emp
8 reject limit unlimited;
1 row created.
SQL> select * from emp;
EMPNO ENAME      JOB              MGR HIREDATE      SAL       COMM DEPTNO
   7369 SMITH      CLERK           7902 17-DEC-80     800                 20
   7499 ALLEN      SALESMAN        7698 20-FEB-81    1600        300      30
   7521 WARD       SALESMAN        7698 22-FEB-81    1250        500      30
   7566 JONES      MANAGER         7839 02-APR-81    2975                 20
   7654 MARTIN     SALESMAN        7698 28-SEP-81    1250       1400      30
   7698 BLAKE      MANAGER         7839 01-MAY-81    2850                 30
   7782 CLARK      MANAGER         7839 09-JUN-81    2450                 10
   7788 SCOTT      ANALYST         7566 19-APR-87    3000                 20
   7839 KING       PRESIDENT            17-NOV-81    5000                 10
   7844 TURNER     SALESMAN        7698 08-SEP-81    1500          0      30
   7876 ADAMS      CLERK           7788 23-MAY-87    1100                 20
   7900 JAMES      CLERK           7698 03-DEC-81     950                 30
   7902 FORD       ANALYST         7566 03-DEC-81    3000                 20
   7934 MILLER     CLERK           7782 23-JAN-82    1300                 10
   8000 MOORE      MANAGER         7839 22-MAY-06    3600                 40
   8001 AZIZ       CLERK           7782 31-AUG-06    1000                 10
16 rows selected.
SQL> select ora_err_number$, ora_err_mesg$, empno empnox, ename enamex, sal salx, deptno deptnox
from bad_emp;
ORA_ERR_NUMBER$ ORA_ERR_MESG$                EMPNOX ENAMEX     SALX   DEPTNOX
           2290 ORA-02290: check constraint 8002   NG         0      10
                (SCOTT.EMP_CK_SAL) violated
           2290 ORA-02290: check constraint 8003   ASFAW      8000   50
                (SCOTT.EMP_CK_SAL) violatedGreat. "Clean! Modern! Rapid!" as Mr Mori said. However, there's a problem. Employee 8003 ASFAW actually violates 2 constraints: the reported EMP_CK_SAL check constraint for having a salary out of range, and the FK_DEPTNO foreign key constraint because dept 50 doesn't exist - which isn't reported. The users want all the violations reported at once so that only one fix operation is required. I don't think I'm going to do that via the error logging clause? Anything I've missed?
So - any ideas on how to avoid the 3000 line package of row-by-row processing with 7 levels of nested IFs I keep finding predecessors and associates have employed to do this kind of thing?

Hello
I would say that unless you can convince your users that they are going to have to accept that for some rows, they are going to have to correct more than one error, in more than one run, you will end up re-inventing the wheel - infact you will be creating a caterpillar track, capable of navigating pretty much any terrain roughly as quick as an actual caterpillar.
Realistically though, what percentage of data is going to require users to re-import the same row twice? Is the quality of the source data very poor?
One potential solution would be to use views on the source data that identify rows violating any given constraint:
SQL> CREATE TABLE dt_test_dept (id number primary key)
2 /
Table created.
SQL>
SQL> insert into dt_test_dept values(1)
2 /
1 row created.
SQL>
SQL> CREATE TABLE dt_test_emp (id number primary key, deptid number, sal number)
2 /
Table created.
SQL>
SQL> alter table dt_test_emp add constraint emp_dept_fk foreign key (deptid) references dt_test_dept
2 /
Table altered.
SQL> alter table dt_test_emp add constraint emp_ck_sal check(sal between 1 and 5000) enable
2 /
Table altered.
SQL>
SQL> CREATE TABLE dt_test_emp_src(id number, deptid number, sal number)
2 /
Table created.
SQL> insert into dt_test_emp_src VALUES(2, 100,500)
2 /
1 row created.
SQL> insert into dt_test_emp_src VALUES(3, 1,5001)
2 /
1 row created.
SQL> insert into dt_test_emp_src VALUES(4, 100,5001)
2 /
1 row created.
SQL> insert into dt_test_emp_src VALUES(5, 1,5000)
2 /
1 row created.
SQL>
SQL> CREATE VIEW dt_test_emp_bad_fk
2 AS
3 SELECT
4     'No matching department' err_text,
5     id,
6     deptid,
7     sal
8 FROM
9     dt_test_emp_src
10 WHERE
11     NOT EXISTS(     SELECT
12                             NULL
13                     FROM
14                             dt_test_dept
15                     WHERE
16                             dt_test_dept.id = dt_test_emp_src.deptid
17             )
18 /
View created.
SQL> CREATE VIEW dt_test_emp_bad_sal
2 AS
3 SELECT
4     'Salary invalid' err_text,
5     id,
6     deptid,
7     sal
8 FROM
9     dt_test_emp_src
10 WHERE
11     sal NOT BETWEEN 1 AND 5000
12 /
View created.
SQL>
SQL> CREATE VIEW dt_test_emp_bad
2 AS
3 SELECT
4     *
5 FROM
6     dt_test_emp_bad_fk
7 UNION ALL
8 SELECT
9     *
10 FROM
11     dt_test_emp_bad_sal
12 /
View created.
SQL> select * from dt_test_emp_bad
2 /
ERR_TEXT                       ID     DEPTID        SAL
No matching department          2        100        500
No matching department          4        100       5001
Salary invalid                  3          1       5001
Salary invalid                  4        100       5001
SQL> select * from dt_test_emp_bad order by id, err_text
2 /
ERR_TEXT                       ID     DEPTID        SAL
No matching department          2        100        500
Salary invalid                  3          1       5001
No matching department          4        100       5001
Salary invalid                  4        100       5001That way you can pre-emptively idetify the rows that will fail and not even attempt to insert them. It does of course mean one view or select statement per constraint but that's the price I guess.
HTH
David
And it should mean much less code to maintain...
Message was edited by:
david_tyler

Procedure failed while using bulk collect into clause and works with cursor

hi all,
I am using "BULK collect into" clause in my procedure and it is failing after 21 minutes and gives the error "end of file communication channel".
after this error comes when i tried to connect database it is giving following error.
ORA -01034 - Oracle not available.
ORA- 27101 - shared memory realm does not exist.
svr4- error :2 : No such file or directory.
when i use cursor instead of BULK COLLECT INTO clause it is running successful.
Following code is working with cursor.
procedure work_kiosk_full(an_jobid in number ,ac_sqlcode out varchar2 ,ac_sqlerrm out varchar2) is
ld_curr_time Date;
cursor cur_work_kiosk is
select distinct jt.jt_id AS jt_id,
NVL ((ROUND ((jt_date_completed - jt_date_requested) * 24, 2)
0
) AS actual_hrs_to_complete,
NVL ((ROUND ((jt_date_responded - jt_date_requested) * 24, 2)
0
) AS actual_hrs_to_respond,
peo1.peo_name AS agent_name,
peo1.peo_user_name AS asagent_soe_id,
le.lglent_desc AS ap_system,
' ' AS assign_work_request_comment,
DECODE (jt.jt_bill_id,
138802, 'CLIENT BILLABLE',
138803, 'CONTRACTED',
138804, 'INTERNAL BILLABLE',
NULL, ' '
) AS billable,
bl.bldg_name_cc AS building, bl.bldg_id_ls AS building_id,
DECODE (bl.bldg_active_cc,
'Y', 'ACTIVE',
'INACTIVE'
) AS building_status,
DECODE (jt.jt_wrk_cause_id,
141521, 'STANDARD WEAR AND TEAR',
141522, 'NEGLIGENCE',
141523, 'ACCIDENTAL',
141524, 'MECHANICAL MALFUNCTION',
141525, 'OVERSIGHT',
141526, 'VANDAL',
141527, 'STANDARD',
141528, 'PROJECT WORK',
6058229, 'TEST',
NULL, ' '
) AS cause_type,
' ' AS comments, peo3.peo_name AS completed_by,
jt.jt_requestor_email AS contact_email,
jt.jt_requestor_name_first
|| ' '
|| jt.jt_requestor_name_last AS contact_name,
jt.jt_requestor_phone AS contact_phone,
cc.cstctrcd_apcode AS corp_code,
cc.cstctrcd_code AS cost_center,
jt.jt_date_closed AS date_closed,
jt.jt_date_completed AS date_completed,
jt.jt_date_requested AS date_requested,
jt.jt_date_responded AS date_responded,
jt.jt_date_response_ecd AS date_response_ecd,
jt.jt_date_scheduled AS date_scheduled,
DECODE (jt.jt_def_id,
139949, 'WTG VENDOR RESPONSE',
139950, 'WAITING ON PARTS',
139951, 'LABOR AVAILABILITY',
139952, 'DEFERRED- HI PRI WORK',
139953, 'WTG APPROVAL',
139954, 'FUNDING REQUIRED',
139955, 'ACCESS DENIED',
139956, 'WTG MATERIAL',
NULL, ' '
) AS deferral_reason,
jt.jt_description AS description,
jt.jt_date_resched_ecd AS ecd,
fmg.facility_manager AS facility_manager,
fl.floors_text AS FLOOR, gl.genled_desc AS general_ledger,
' ' AS kiosk_date_requested, ' ' AS kiosk_dispatch_confirmed,
' ' AS kiosk_dispatched,
eqp.equip_customer_code AS linked_equipment_alias,
eqp.equip_id AS linked_equipment_id,
eqp.equip_text AS linked_equipment_name,
DECODE (jt_originator_type_id,
1000, 'PROJECT MOVE REQUEST',
138834, 'CUSTOMER INITIATED CORRECTION',
138835, 'CUSTOMER INITIATED REQUEST',
138836, 'CORRECTIVE MAINTENANCE',
138837, 'CONFERENCE ROOM BOOKING',
138838, 'PROJECT INITIATED REQUEST',
138839, 'PLANNED PREVENTIVE MAINTENANCE',
138840, 'SELF INITATED REQUEST',
NULL, ' '
) AS originator_type,
' ' AS payment_terms, priority_text AS priority_code,
swoty.sworktype_text AS problem_type,
prop.property_name_cc AS property,
jt.jt_cost_quote_total AS quote_total,
par.levels_name AS region,
DECODE (jt.jt_repdef_id,
141534, 'ADJUSTED SETTING',
141535, 'TRAINING FOR END',
141536, 'NEW REQUEST',
141537, 'NO REPAIR REQUIR',
141538, 'REPLACED PARTS',
141539, 'REPLACE EQUIPMEN',
1000699, 'NEW REQUEST',
NULL, ' '
) AS repair_definitions,
jt.jt_repairdesc AS repair_description,
jt.jt_requestor AS requestor, ' ' AS requestor_cost_center,
jt.jt_requestor_email AS requestor_email,
jt.jt_requestor_name_first AS requestor_name,
jt.jt_requestor_phone AS requestor_phone,
' ' AS response_time, rm.room_name_cc AS room,
p1.peo_provider_code1 AS service_provider,
p1.peo_address_1 AS service_provider_address,
peocity.city_text service_provider_city,
p1.peo_provider_code1 AS service_provider_code,
peocity.city_country_name AS service_provider_country,
peocur.currency_text AS service_provider_currency,
p1.peo_name AS service_provider_description,
p1.peo_dispatch_method AS serv_prov_dispatc_hmethod,
p1.peo_rate_double AS serv_prov_double_time_rate,
p1.peo_email AS service_provider_email,
p1.peo_emergency_phone AS serv_prov_emergency_phone,
p1.peo_fax AS service_provider_fax_number,
p1.peo_home_phone AS service_provider_home_phone,
p1.peo_rate_hourly AS service_provider_hourly_rate,
p1.peo_title AS service_provider_job_title,
p1.peo_method_id AS service_provider_method,
p1.peo_cell_phone AS service_provider_mobile_phone,
p1.peo_pager AS service_provider_pager,
p1.peo_rate_differential AS service_provider_rates,
p1.peo_rate_differential AS ser_prov_shift_differential,
peocity.city_state_prov_text AS serv_prov_state_province,
DECODE (p1.peo_active,
'Y', 'ACTIVE',
'INACTIVE'
) AS service_provider_status,
p1.peo_url AS serv_prov_web_site_address,
p1.peo_phone AS service_provider_work_phone,
p1.peo_postal_code AS serv_prov_zip_postal_code, ' ' AS shift,
' ' AS skill,
DECODE (jt.jt_bigstatus_id,
138813, 'NEW',
138814, 'PENDING',
138815, 'OPEN',
138816, 'COMPLETED',
138817, 'CLOSED',
138818, 'CANCELLED',
NULL, ' '
) AS status,
lev.levels_name AS subregion, ' ' AS trade,
p1.peo_ls_interface_code1 AS vendor_id,
p1.peo_fax AS vendor_purchasing_fax,
p1.peo_vendor_site_code AS vendor_sitecode,
jt.jt_id AS vendor_ticket, p1.peo_name AS vendor_companyname,
jt.jt_requestor_vip AS vip, wo.wo_id AS work_order_no,
jt.jt_id AS work_request,
jt.jt_class_id AS work_request_class,
woty.worktype_text AS work_type, ' ' AS wr_cost,
jt.jt_description AS wr_description,
' ' AS wr_dispatch_method,
DECODE (jt.jt_bigstatus_id,
138813, 'NEW',
138814, 'PENDING',
138815, 'OPEN',
138816, 'COMPLETED',
138817, 'CLOSED',
138818, 'CANCELLED',
NULL, ' '
) AS wr_status,
ctry.country_name AS country
FROM citi.jobticket jt,
citi.property prop,
citi.bldg bl,
citi.bldg_levels bldglvl,
citi.LEVELS lev,
citi.LEVELS par,
(SELECT crstools.stragg (peo_name) facility_manager,
bldgcon_bldg_id
FROM citi.bldg_contacts, citi.people
WHERE bldgcon_peo_id = peo_id
AND bldgcon_contype_id IN (40181, 10142)
GROUP BY bldgcon_bldg_id) fmg,
citi.floors fl,
citi.room rm,
citi.general_ledger gl,
citi.legal_entity le,
citi.cost_center_codes cc,
citi.equipment eqp,
citi.worktype woty,
citi.subworktype swoty,
citi.work_order wo,
citi.jt_workers jtwo,
citi.priority,
citi.country ctry,
citi.people p1,
citi.people peo3,
citi.people peo1,
citi.city peocity,
citi.currency peocur
WHERE jt.jt_bldg_id = bl.bldg_id
AND bl.bldg_id = bldglvl.bldg_levels_bldg_id
AND bldglvl.bldg_levels_levels_id = lev.levels_id
AND lev.levels_parent = par.levels_id(+)
AND prop.property_id = bl.bldg_property_id
AND bl.bldg_active_ls <> 'N'
AND jt.jt_floors_id = fl.floors_id(+)
AND jt.jt_room_id = rm.room_id(+)
AND jt.jt_bldg_id = fmg.bldgcon_bldg_id(+)
AND jt.jt_genled_id = gl.genled_id(+)
AND gl.genled_lglent_id = le.lglent_id(+)
AND jt.jt_cstctrcd_id = cc.cstctrcd_id(+)
AND jt.jt_equip_id = eqp.equip_id(+)
AND jt.jt_id = jtwo.jtw_jt_id(+)
AND jt.jt_worktype_id = woty.worktype_id(+)
AND jt.jt_sworktype_id = swoty.sworktype_id(+)
AND jt.jt_wo_id = wo.wo_id
AND jt.jt_priority_id = priority_id(+)
--AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12)
AND jt.jt_last_update >= ADD_MONTHS (ld_curr_time, -12)
AND bl.bldg_country_id = ctry.country_id
AND jtwo.jtw_peo_id = p1.peo_id(+)
AND p1.peo_city_id = peocity.city_id(+)
AND jt.jt_completed_by_peo_id = peo3.peo_id(+)
AND p1.peo_rate_currency_id = peocur.currency_id(+)
AND jt.jt_agent_peo_id = peo1.peo_id(+);
BEGIN
execute immediate 'truncate table crstools.drt_bom_work_kiosk';
select sysdate into ld_curr_time from dual;
FOR cur_rec in cur_work_kiosk LOOP
IF MOD(cur_work_kiosk%rowcount,10000 ) = 0 then
COMMIT;
END IF;
INSERT INTO crstools.drt_bom_work_kiosk
( JT_ID
,ACTUAL_HRS_TO_COMPLETE
,ACTUAL_HRS_TO_RESPOND
,AGENT_NAME
,ASAGENT_SOE_ID
,AP_SYSTEM
,ASSIGN_WORK_REQUEST_COMMENT
,BILLABLE
,BUILDING
,BUILDING_ID
,BUILDING_STATUS
,CAUSE_TYPE
,COMMENTS
,COMPLETED_BY
,CONTACT_EMAIL
,CONTACT_NAME
,CONTACT_PHONE
,CORP_CODE
,COST_CENTER
,DATE_CLOSED
,DATE_COMPLETED
,DATE_REQUESTED
,DATE_RESPONDED
,DATE_RESPONSE_ECD
,DATE_SCHEDULED
,DEFERRAL_REASON
,DESCRIPTION
,ECD
,FACILITY_MANAGER
,FLOOR
,GENERAL_LEDGER
,KIOSK_DATE_REQUESTED
,KIOSK_DISPATCH_CONFIRMED
,KIOSK_DISPATCHED
,LINKED_EQUIPMENT_ALIAS
,LINKED_EQUIPMENT_ID
,LINKED_EQUIPMENT_NAME
,ORIGINATOR_TYPE
,PAYMENT_TERMS
,PRIORITY_CODE
,PROBLEM_TYPE
,PROPERTY
,QUOTE_TOTAL
,REGION
,REPAIR_DEFINITIONS
,REPAIR_DESCRIPTION
,REQUESTOR
,REQUESTOR_COST_CENTER
,REQUESTOR_EMAIL
,REQUESTOR_NAME
,REQUESTOR_PHONE
,RESPONSE_TIME
,ROOM
,SERVICE_PROVIDER
,SERVICE_PROVIDER_ADDRESS
,SERVICE_PROVIDER_CITY
,SERVICE_PROVIDER_CODE
,SERVICE_PROVIDER_COUNTRY
,SERVICE_PROVIDER_CURRENCY
,SERVICE_PROVIDER_DESCRIPTION
,SERV_PROV_DISPATC_HMETHOD
,SERV_PROV_DOUBLE_TIME_RATE
,SERVICE_PROVIDER_EMAIL
,SERV_PROV_EMERGENCY_PHONE
,SERVICE_PROVIDER_FAX_NUMBER
,SERVICE_PROVIDER_HOME_PHONE
,SERVICE_PROVIDER_HOURLY_RATE
,SERVICE_PROVIDER_JOB_TITLE
,SERVICE_PROVIDER_METHOD
,SERVICE_PROVIDER_MOBILE_PHONE
,SERVICE_PROVIDER_PAGER
,SERVICE_PROVIDER_RATES
,SER_PROV_SHIFT_DIFFERENTIAL
,SERV_PROV_STATE_PROVINCE
,SERVICE_PROVIDER_STATUS
,SERV_PROV_WEB_SITE_ADDRESS
,SERVICE_PROVIDER_WORK_PHONE
,SERV_PROV_ZIP_POSTAL_CODE
,SHIFT
,SKILL
,STATUS
,SUBREGION
,TRADE
,VENDOR_ID
,VENDOR_PURCHASING_FAX
,VENDOR_SITECODE
,VENDOR_TICKET
,VENDOR_COMPANYNAME
,VIP
,WORK_ORDER_NO
,WORK_REQUEST
,WORK_REQUEST_CLASS
,WORK_TYPE
,WR_COST
,WR_DESCRIPTION
,WR_DISPATCH_METHOD
,WR_STATUS
,COUNTRY
,CREATE_DATE
VALUES
(cur_rec.jt_id
,cur_rec.ACTUAL_HRS_TO_COMPLETE
,cur_rec.ACTUAL_HRS_TO_RESPOND
,cur_rec.AGENT_NAME
,cur_rec.ASAGENT_SOE_ID
,cur_rec.AP_SYSTEM
,cur_rec.ASSIGN_WORK_REQUEST_COMMENT
,cur_rec.BILLABLE
,cur_rec.BUILDING
,cur_rec.BUILDING_ID
,cur_rec.BUILDING_STATUS
,cur_rec.CAUSE_TYPE
,cur_rec.COMMENTS
,cur_rec.COMPLETED_BY
,cur_rec.CONTACT_EMAIL
,cur_rec.CONTACT_NAME
,cur_rec.CONTACT_PHONE
,cur_rec.CORP_CODE
,cur_rec.COST_CENTER
,cur_rec.DATE_CLOSED
,cur_rec.DATE_COMPLETED
,cur_rec.DATE_REQUESTED
,cur_rec.DATE_RESPONDED
,cur_rec.DATE_RESPONSE_ECD
,cur_rec.DATE_SCHEDULED
,cur_rec.DEFERRAL_REASON
,cur_rec.DESCRIPTION
,cur_rec.ECD
,cur_rec.FACILITY_MANAGER
,cur_rec.FLOOR
,cur_rec.GENERAL_LEDGER
,cur_rec.KIOSK_DATE_REQUESTED
,cur_rec.KIOSK_DISPATCH_CONFIRMED
,cur_rec.KIOSK_DISPATCHED
,cur_rec.LINKED_EQUIPMENT_ALIAS
,cur_rec.LINKED_EQUIPMENT_ID
,cur_rec.LINKED_EQUIPMENT_NAME
,cur_rec.ORIGINATOR_TYPE
,cur_rec.PAYMENT_TERMS
,cur_rec.PRIORITY_CODE
,cur_rec.PROBLEM_TYPE
,cur_rec.PROPERTY
,cur_rec.QUOTE_TOTAL
,cur_rec.REGION
,cur_rec.REPAIR_DEFINITIONS
,cur_rec.REPAIR_DESCRIPTION
,cur_rec.REQUESTOR
,cur_rec.REQUESTOR_COST_CENTER
,cur_rec.REQUESTOR_EMAIL
,cur_rec.REQUESTOR_NAME
,cur_rec.REQUESTOR_PHONE
,cur_rec.RESPONSE_TIME
,cur_rec.ROOM
,cur_rec.SERVICE_PROVIDER
,cur_rec.SERVICE_PROVIDER_ADDRESS
,cur_rec.SERVICE_PROVIDER_CITY
,cur_rec.SERVICE_PROVIDER_CODE
,cur_rec.SERVICE_PROVIDER_COUNTRY
,cur_rec.SERVICE_PROVIDER_CURRENCY
,cur_rec.SERVICE_PROVIDER_DESCRIPTION
,cur_rec.SERV_PROV_DISPATC_HMETHOD
,cur_rec.SERV_PROV_DOUBLE_TIME_RATE
,cur_rec.SERVICE_PROVIDER_EMAIL
,cur_rec.SERV_PROV_EMERGENCY_PHONE
,cur_rec.SERVICE_PROVIDER_FAX_NUMBER
,cur_rec.SERVICE_PROVIDER_HOME_PHONE
,cur_rec.SERVICE_PROVIDER_HOURLY_RATE
,cur_rec.SERVICE_PROVIDER_JOB_TITLE
,cur_rec.SERVICE_PROVIDER_METHOD
,cur_rec.SERVICE_PROVIDER_MOBILE_PHONE
,cur_rec.SERVICE_PROVIDER_PAGER
,cur_rec.SERVICE_PROVIDER_RATES
,cur_rec.SER_PROV_SHIFT_DIFFERENTIAL
,cur_rec.SERV_PROV_STATE_PROVINCE
,cur_rec.SERVICE_PROVIDER_STATUS
,cur_rec.SERV_PROV_WEB_SITE_ADDRESS
,cur_rec.SERVICE_PROVIDER_WORK_PHONE
,cur_rec.SERV_PROV_ZIP_POSTAL_CODE
,cur_rec.SHIFT
,cur_rec.SKILL
,cur_rec.STATUS
,cur_rec.SUBREGION
,cur_rec.TRADE
,cur_rec.VENDOR_ID
,cur_rec.VENDOR_PURCHASING_FAX
,cur_rec.VENDOR_SITECODE
,cur_rec.VENDOR_TICKET
,cur_rec.VENDOR_COMPANYNAME
,cur_rec.VIP
,cur_rec.WORK_ORDER_NO
,cur_rec.WORK_REQUEST
,cur_rec.WORK_REQUEST_CLASS
,cur_rec.WORK_TYPE
,cur_rec.WR_COST
,cur_rec.WR_DESCRIPTION
,cur_rec.WR_DISPATCH_METHOD
,cur_rec.WR_STATUS
,cur_rec.COUNTRY
,ld_curr_time
END LOOP;
COMMIT;
exception
when others then
rollback;
dbms_output.put_line('SQLCODE :'||sqlcode ||' Error :'||sqlerrm);
end work_kiosk_full;
Note : total record inserted 849000.
The same code does not work with bulk collect into caluse.
Please help me out why this is happening.
Thanks & regards
shyam~

Shyam,
I agree with Billy.
Why are you not using an INSERT..SELECT ?
Also, what are you trying to achieve by
- incremental commits?
- copying data from one table to another (using expensive I/O)?
- using dynamic DML?
Most of these approaches are typically wrong - and not recommended for scalable and performant Oracle applications.I could see you using a CURSOR FOR LOOP if you were changing the data being inserted in such a way that you couldn't encapsulate the changes in a query, but you are doing a straight insert into the table from your Cursor. A much more efficient way would be to use the following modifications I made to your code example:
PROCEDURE WORK_KIOSK_FULL(AN_JOBID   IN NUMBER,
                          AC_SQLCODE OUT VARCHAR2,
                          AC_SQLERRM OUT VARCHAR2) IS
BEGIN
   EXECUTE IMMEDIATE 'truncate table crstools.drt_bom_work_kiosk';
   /* Note: The APPEND hint forces a Direct Path INSERT (see Link below code sample) and is combined with the NOLOGGING Hint */
   /*        To dramtically increase performance. The Direct Path INSERT inserts records above the High-Water Mark on the table. */
   INSERT /*+ APPEND NOLOGGING */ INTO CRSTOOLS.DRT_BOM_WORK_KIOSK
      (JT_ID
      ,ACTUAL_HRS_TO_COMPLETE
      ,ACTUAL_HRS_TO_RESPOND
      ,AGENT_NAME
      ,ASAGENT_SOE_ID
      ,AP_SYSTEM
--      ,ASSIGN_WORK_REQUEST_COMMENT     /* I commented out this COLUMN because it doesn't make sense to me to insert */
      ,BILLABLE                          /* a couple of space characters into a table.   If the intent is to leave the column NULL */
      ,BUILDING                          /* don't include it in your INSERT statement and it will be NULL. If there is a valid reason */
      ,BUILDING_ID                       /* for inserting the spaces, then remove the "line comments" from the insert and select statments */
      ,BUILDING_STATUS
      ,CAUSE_TYPE
--      ,COMMENTS
      ,COMPLETED_BY
      ,CONTACT_EMAIL
      ,CONTACT_NAME
      ,CONTACT_PHONE
      ,CORP_CODE
      ,COST_CENTER
      ,DATE_CLOSED
      ,DATE_COMPLETED
      ,DATE_REQUESTED
      ,DATE_RESPONDED
      ,DATE_RESPONSE_ECD
      ,DATE_SCHEDULED
      ,DEFERRAL_REASON
      ,DESCRIPTION
      ,ECD
      ,FACILITY_MANAGER
      ,FLOOR
      ,GENERAL_LEDGER
--      ,KIOSK_DATE_REQUESTED
--      ,KIOSK_DISPATCH_CONFIRMED
--      ,KIOSK_DISPATCHED
      ,LINKED_EQUIPMENT_ALIAS
      ,LINKED_EQUIPMENT_ID
      ,LINKED_EQUIPMENT_NAME
      ,ORIGINATOR_TYPE
--      ,PAYMENT_TERMS
      ,PRIORITY_CODE
      ,PROBLEM_TYPE
      ,PROPERTY
      ,QUOTE_TOTAL
      ,REGION
      ,REPAIR_DEFINITIONS
      ,REPAIR_DESCRIPTION
      ,REQUESTOR
--      ,REQUESTOR_COST_CENTER
      ,REQUESTOR_EMAIL
      ,REQUESTOR_NAME
      ,REQUESTOR_PHONE
--      ,RESPONSE_TIME
      ,ROOM
      ,SERVICE_PROVIDER
      ,SERVICE_PROVIDER_ADDRESS
      ,SERVICE_PROVIDER_CITY
      ,SERVICE_PROVIDER_CODE
      ,SERVICE_PROVIDER_COUNTRY
      ,SERVICE_PROVIDER_CURRENCY
      ,SERVICE_PROVIDER_DESCRIPTION
      ,SERV_PROV_DISPATC_HMETHOD
      ,SERV_PROV_DOUBLE_TIME_RATE
      ,SERVICE_PROVIDER_EMAIL
      ,SERV_PROV_EMERGENCY_PHONE
      ,SERVICE_PROVIDER_FAX_NUMBER
      ,SERVICE_PROVIDER_HOME_PHONE
      ,SERVICE_PROVIDER_HOURLY_RATE
      ,SERVICE_PROVIDER_JOB_TITLE
      ,SERVICE_PROVIDER_METHOD
      ,SERVICE_PROVIDER_MOBILE_PHONE
      ,SERVICE_PROVIDER_PAGER
      ,SERVICE_PROVIDER_RATES
      ,SER_PROV_SHIFT_DIFFERENTIAL
      ,SERV_PROV_STATE_PROVINCE
      ,SERVICE_PROVIDER_STATUS
      ,SERV_PROV_WEB_SITE_ADDRESS
      ,SERVICE_PROVIDER_WORK_PHONE
      ,SERV_PROV_ZIP_POSTAL_CODE
--      ,SHIFT
--      ,SKILL
      ,STATUS
      ,SUBREGION
--      ,TRADE
      ,VENDOR_ID
      ,VENDOR_PURCHASING_FAX
      ,VENDOR_SITECODE
      ,VENDOR_TICKET
      ,VENDOR_COMPANYNAME
      ,VIP
      ,WORK_ORDER_NO
      ,WORK_REQUEST
      ,WORK_REQUEST_CLASS
      ,WORK_TYPE
--      ,WR_COST
      ,WR_DESCRIPTION
--      ,WR_DISPATCH_METHOD
      ,WR_STATUS
      ,COUNTRY
      ,CREATE_DATE
   VALUES
      (SELECT DISTINCT
          JT.JT_ID AS JT_ID
         ,NVL((ROUND((JT_DATE_COMPLETED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_COMPLETE
         ,NVL((ROUND((JT_DATE_RESPONDED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_RESPOND
         ,PEO1.PEO_NAME AS AGENT_NAME
         ,PEO1.PEO_USER_NAME AS ASAGENT_SOE_ID
         ,LE.LGLENT_DESC AS AP_SYSTEM
--         ,' ' AS ASSIGN_WORK_REQUEST_COMMENT
         ,DECODE(JT.JT_BILL_ID,138802,'CLIENT BILLABLE'
                              ,138803,'CONTRACTED'
                              ,138804,'INTERNAL BILLABLE',NULL,' ') AS BILLABLE
         ,BL.BLDG_NAME_CC AS BUILDING
         ,BL.BLDG_ID_LS AS BUILDING_ID
         ,DECODE(BL.BLDG_ACTIVE_CC, 'Y', 'ACTIVE', 'INACTIVE') AS BUILDING_STATUS
         ,DECODE(JT.JT_WRK_CAUSE_ID,141521,'STANDARD WEAR AND TEAR'
                                   ,141522,'NEGLIGENCE'
                                   ,141523,'ACCIDENTAL'
                                   ,141524,'MECHANICAL MALFUNCTION'
                                   ,141525,'OVERSIGHT'
                                   ,141526,'VANDAL'
                                   ,141527,'STANDARD'
                                   ,141528,'PROJECT WORK'
                                   ,6058229,'TEST',NULL,' ') AS CAUSE_TYPE
--         ,' ' AS COMMENTS
         ,PEO3.PEO_NAME AS COMPLETED_BY
         ,JT.JT_REQUESTOR_EMAIL AS CONTACT_EMAIL
         ,JT.JT_REQUESTOR_NAME_FIRST || ' ' ||JT.JT_REQUESTOR_NAME_LAST AS CONTACT_NAME
         ,JT.JT_REQUESTOR_PHONE AS CONTACT_PHONE
         ,CC.CSTCTRCD_APCODE AS CORP_CODE
         ,CC.CSTCTRCD_CODE AS COST_CENTER
         ,JT.JT_DATE_CLOSED AS DATE_CLOSED
         ,JT.JT_DATE_COMPLETED AS DATE_COMPLETED
         ,JT.JT_DATE_REQUESTED AS DATE_REQUESTED
         ,JT.JT_DATE_RESPONDED AS DATE_RESPONDED
         ,JT.JT_DATE_RESPONSE_ECD AS DATE_RESPONSE_ECD
         ,JT.JT_DATE_SCHEDULED AS DATE_SCHEDULED
         ,DECODE(JT.JT_DEF_ID,139949,'WTG VENDOR RESPONSE'
                             ,139950,'WAITING ON PARTS'
                             ,139951,'LABOR AVAILABILITY'
                             ,139952,'DEFERRED- HI PRI WORK'
                             ,139953,'WTG APPROVAL'
                             ,139954,'FUNDING REQUIRED'
                             ,139955,'ACCESS DENIED'
                             ,139956,'WTG MATERIAL',NULL,' ') AS DEFERRAL_REASON
         ,JT.JT_DESCRIPTION AS DESCRIPTION
         ,JT.JT_DATE_RESCHED_ECD AS ECD
         ,FMG.FACILITY_MANAGER AS FACILITY_MANAGER
         ,FL.FLOORS_TEXT AS FLOOR
         ,GL.GENLED_DESC AS GENERAL_LEDGER
--         ,' ' AS KIOSK_DATE_REQUESTED
--         ,' ' AS KIOSK_DISPATCH_CONFIRMED
--         ,' ' AS KIOSK_DISPATCHED
         ,EQP.EQUIP_CUSTOMER_CODE AS LINKED_EQUIPMENT_ALIAS
         ,EQP.EQUIP_ID AS LINKED_EQUIPMENT_ID
         ,EQP.EQUIP_TEXT AS LINKED_EQUIPMENT_NAME
         ,DECODE(JT_ORIGINATOR_TYPE_ID,1000,'PROJECT MOVE REQUEST'
                                      ,138834,'CUSTOMER INITIATED CORRECTION'
                                      ,138835,'CUSTOMER INITIATED REQUEST'
                                      ,138836,'CORRECTIVE MAINTENANCE'
                                      ,138837,'CONFERENCE ROOM BOOKING'
                                      ,138838,'PROJECT INITIATED REQUEST'
                                      ,138839,'PLANNED PREVENTIVE MAINTENANCE'
                                      ,138840,'SELF INITATED REQUEST',NULL,' ') AS ORIGINATOR_TYPE
--         ,' ' AS PAYMENT_TERMS
         ,PRIORITY_TEXT AS PRIORITY_CODE
         ,SWOTY.SWORKTYPE_TEXT AS PROBLEM_TYPE
         ,PROP.PROPERTY_NAME_CC AS PROPERTY
         ,JT.JT_COST_QUOTE_TOTAL AS QUOTE_TOTAL
         ,PAR.LEVELS_NAME AS REGION
         ,DECODE(JT.JT_REPDEF_ID,141534,'ADJUSTED SETTING'
                                ,141535,'TRAINING FOR END'
                                ,141536,'NEW REQUEST'
                                ,141537,'NO REPAIR REQUIR'
                                ,141538,'REPLACED PARTS'
                                ,141539,'REPLACE EQUIPMEN'
                                ,1000699,'NEW REQUEST',NULL,' ') AS REPAIR_DEFINITIONS
         ,JT.JT_REPAIRDESC AS REPAIR_DESCRIPTION
         ,JT.JT_REQUESTOR AS REQUESTOR
--         ,' ' AS REQUESTOR_COST_CENTER
         ,JT.JT_REQUESTOR_EMAIL AS REQUESTOR_EMAIL
         ,JT.JT_REQUESTOR_NAME_FIRST AS REQUESTOR_NAME
         ,JT.JT_REQUESTOR_PHONE AS REQUESTOR_PHONE
--         ,' ' AS RESPONSE_TIME
         ,RM.ROOM_NAME_CC AS ROOM
         ,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER
         ,P1.PEO_ADDRESS_1 AS SERVICE_PROVIDER_ADDRESS
         ,PEOCITY.CITY_TEXT SERVICE_PROVIDER_CITY
         ,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER_CODE
         ,PEOCITY.CITY_COUNTRY_NAME AS SERVICE_PROVIDER_COUNTRY
         ,PEOCUR.CURRENCY_TEXT AS SERVICE_PROVIDER_CURRENCY
         ,P1.PEO_NAME AS SERVICE_PROVIDER_DESCRIPTION
         ,P1.PEO_DISPATCH_METHOD AS SERV_PROV_DISPATC_HMETHOD
         ,P1.PEO_RATE_DOUBLE AS SERV_PROV_DOUBLE_TIME_RATE
         ,P1.PEO_EMAIL AS SERVICE_PROVIDER_EMAIL
         ,P1.PEO_EMERGENCY_PHONE AS SERV_PROV_EMERGENCY_PHONE
         ,P1.PEO_FAX AS SERVICE_PROVIDER_FAX_NUMBER
         ,P1.PEO_HOME_PHONE AS SERVICE_PROVIDER_HOME_PHONE
         ,P1.PEO_RATE_HOURLY AS SERVICE_PROVIDER_HOURLY_RATE
         ,P1.PEO_TITLE AS SERVICE_PROVIDER_JOB_TITLE
         ,P1.PEO_METHOD_ID AS SERVICE_PROVIDER_METHOD
         ,P1.PEO_CELL_PHONE AS SERVICE_PROVIDER_MOBILE_PHONE
         ,P1.PEO_PAGER AS SERVICE_PROVIDER_PAGER
         ,P1.PEO_RATE_DIFFERENTIAL AS SERVICE_PROVIDER_RATES
         ,P1.PEO_RATE_DIFFERENTIAL AS SER_PROV_SHIFT_DIFFERENTIAL
         ,PEOCITY.CITY_STATE_PROV_TEXT AS SERV_PROV_STATE_PROVINCE
         ,DECODE(P1.PEO_ACTIVE, 'Y', 'ACTIVE', 'INACTIVE') AS SERVICE_PROVIDER_STATUS
         ,P1.PEO_URL AS SERV_PROV_WEB_SITE_ADDRESS
         ,P1.PEO_PHONE AS SERVICE_PROVIDER_WORK_PHONE
         ,P1.PEO_POSTAL_CODE AS SERV_PROV_ZIP_POSTAL_CODE
--         ,' ' AS SHIFT
--         ,' ' AS SKILL
         ,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW'
                                   ,138814,'PENDING'
                                   ,138815,'OPEN'
                                   ,138816,'COMPLETED'
                                   ,138817,'CLOSED'
                                   ,138818,'CANCELLED',NULL,' ') AS STATUS
         ,LEV.LEVELS_NAME AS SUBREGION
--         ,' ' AS TRADE
         ,P1.PEO_LS_INTERFACE_CODE1 AS VENDOR_ID
         ,P1.PEO_FAX AS VENDOR_PURCHASING_FAX
         ,P1.PEO_VENDOR_SITE_CODE AS VENDOR_SITECODE
         ,JT.JT_ID AS VENDOR_TICKET
         ,P1.PEO_NAME AS VENDOR_COMPANYNAME
         ,JT.JT_REQUESTOR_VIP AS VIP
         ,WO.WO_ID AS WORK_ORDER_NO
         ,JT.JT_ID AS WORK_REQUEST
         ,JT.JT_CLASS_ID AS WORK_REQUEST_CLASS
         ,WOTY.WORKTYPE_TEXT AS WORK_TYPE
--         ,' ' AS WR_COST
         ,JT.JT_DESCRIPTION AS WR_DESCRIPTION
--         ,' ' AS WR_DISPATCH_METHOD
         ,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW'
                                   ,138814,'PENDING'
                                   ,138815,'OPEN'
                                   ,138816,'COMPLETED'
                                   ,138817,'CLOSED'
                                   ,138818,'CANCELLED',NULL,' ') AS WR_STATUS
         ,CTRY.COUNTRY_NAME AS COUNTRY
         ,SYSDATE --LD_CURR_TIME
     FROM CITI.JOBTICKET JT,
          CITI.PROPERTY PROP,
          CITI.BLDG BL,
          CITI.BLDG_LEVELS BLDGLVL,
          CITI.LEVELS LEV,
          CITI.LEVELS PAR,
          (SELECT CRSTOOLS.STRAGG(PEO_NAME) FACILITY_MANAGER,
                  BLDGCON_BLDG_ID
             FROM CITI.BLDG_CONTACTS, CITI.PEOPLE
            WHERE BLDGCON_PEO_ID = PEO_ID
              AND BLDGCON_CONTYPE_ID IN (40181, 10142)
            GROUP BY BLDGCON_BLDG_ID) FMG,
          CITI.FLOORS FL,
          CITI.ROOM RM,
          CITI.GENERAL_LEDGER GL,
          CITI.LEGAL_ENTITY LE,
          CITI.COST_CENTER_CODES CC,
          CITI.EQUIPMENT EQP,
          CITI.WORKTYPE WOTY,
          CITI.SUBWORKTYPE SWOTY,
          CITI.WORK_ORDER WO,
          CITI.JT_WORKERS JTWO,
          CITI.PRIORITY,
          CITI.COUNTRY CTRY,
          CITI.PEOPLE P1,
          CITI.PEOPLE PEO3,
          CITI.PEOPLE PEO1,
          CITI.CITY PEOCITY,
          CITI.CURRENCY PEOCUR
    WHERE JT.JT_BLDG_ID = BL.BLDG_ID
      AND BL.BLDG_ID = BLDGLVL.BLDG_LEVELS_BLDG_ID
      AND BLDGLVL.BLDG_LEVELS_LEVELS_ID = LEV.LEVELS_ID
      AND LEV.LEVELS_PARENT = PAR.LEVELS_ID(+)
      AND PROP.PROPERTY_ID = BL.BLDG_PROPERTY_ID
      AND BL.BLDG_ACTIVE_LS = 'N'
      AND JT.JT_FLOORS_ID = FL.FLOORS_ID(+)
      AND JT.JT_ROOM_ID = RM.ROOM_ID(+)
      AND JT.JT_BLDG_ID = FMG.BLDGCON_BLDG_ID(+)
      AND JT.JT_GENLED_ID = GL.GENLED_ID(+)
      AND GL.GENLED_LGLENT_ID = LE.LGLENT_ID(+)
      AND JT.JT_CSTCTRCD_ID = CC.CSTCTRCD_ID(+)
      AND JT.JT_EQUIP_ID = EQP.EQUIP_ID(+)
      AND JT.JT_ID = JTWO.JTW_JT_ID(+)
      AND JT.JT_WORKTYPE_ID = WOTY.WORKTYPE_ID(+)
      AND JT.JT_SWORKTYPE_ID = SWOTY.SWORKTYPE_ID(+)
      AND JT.JT_WO_ID = WO.WO_ID
      AND JT.JT_PRIORITY_ID = PRIORITY_ID(+)
         --AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12)
      AND JT.JT_LAST_UPDATE >= ADD_MONTHS(LD_CURR_TIME, -12)
      AND BL.BLDG_COUNTRY_ID = CTRY.COUNTRY_ID
      AND JTWO.JTW_PEO_ID = P1.PEO_ID(+)
      AND P1.PEO_CITY_ID = PEOCITY.CITY_ID(+)
      AND JT.JT_COMPLETED_BY_PEO_ID = PEO3.PEO_ID(+)
      AND P1.PEO_RATE_CURRENCY_ID = PEOCUR.CURRENCY_ID(+)
      AND JT.JT_AGENT_PEO_ID = PEO1.PEO_ID(+)
   COMMIT;
EXCEPTION
   WHEN OTHERS THEN
      ROLLBACK;
      DBMS_OUTPUT.PUT_LINE('SQLCODE :' || SQLCODE || ' Error :' || SQLERRM);
END WORK_KIOSK_FULL;Here's the link for infor on the [Oracle Direct-Path INSERT |http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/c21dlins.htm#10778].
Also, if you are truly intent on using a CURSOR FOR LOOP with the BULK COLLECT, I suggest you read Steven Feuerstein's article [PL/SQL Practices: On BULK COLLECT |http://www.oracle.com/technology/oramag/oracle/08-mar/o28plsql.html].
Hope this helps.
Craig...
If my response or the response of another was helpful, please mark it accordingly

Subquery in insert into clause

what is the use of using subquery in insert into clause.
e.g. insert into (select empno from emp)
values(1234)
regards
kiran

Not really of common use, I think, but WITH CHECK OPTION option could be one reason for using that. Let's see an example :
SQL> INSERT INTO
2 (SELECT empno, ename, deptno FROM emp WHERE deptno < 20)
3* VALUES (1111, 'Brown', 30)
SQL> /
1 row created.That's the same as
SQL> insert into emp (empno, ename, deptno)
2 values(1111, 'Brown', 30);But
SQL> INSERT INTO
2 (SELECT empno, ename, deptno FROM emp WHERE deptno < 20 WITH CHECK OPTION)
3* VALUES (2222, 'Green', 30)
SQL> /
(SELECT empno, ename, deptno FROM emp WHERE deptno < 20
ERROR at line 2:
ORA-01402: view WITH CHECK OPTION where-clause violation
SQL>Paul

Error: Invalid interruption of a database selection

Hi,
When i execute the below code, the output is displayed without any problem.
<b>tables lfa1.
select * from lfa1 order by lifnr.
write / lfa1-lifnr.
endselect.</b>
But however when i debug this piece of code, i get an error as below.
ShrtText - Invalid interruption of a database selection
Runtime Errors - DBIF_RSQL_INVALID_CURSOR
Exceptn - CX_SY_OPEN_SQL_DB
Can anybody help me with the reason for the occurence of this problem.

Hi Vijay,
Just go through the following link:
Re: DBIF_RSQL_INVALID_CURSOR dump during debugging
As Sooness pointed out, SELECT-ENDSELECT dumps only the first time. Try re-executing it and it will work fine.
Meanwhile, it is always better to use INTO TABLE OF instead of SELECT-ENDSELECT, as this minimizes database hits.
Regards
Anil Madhavan

Creating chart leads in XML Parsing Error: mismatched tag. Expected: /svg

Hello ALL,
I searched this forum but unfortunately I find not a solution for the following use case:
described in steps
1.) create a region with chart (typ = line) -> o.k.
2.) create a sql statement to have data in the chart -> o.k.
3.) running report with this created region and chart -> vizualisation o.k.
3.) create a data picker item ":P21_END_DATE"
4.) replaced the where clause "WHERE a_timestamp >= To_date ('01.02.2007', 'dd/mm/yyyy HH24:MI') -1/24" with WHERE a_timestamp >= To_date (:P21_END_DATE, 'dd/mm/yyyy HH24:MI') -1/24
5.) running report with this created region and chart and data picker item -> vizualisation not o.k. I get the attached error message.
I read already in the forum and knows that the end tag of the svg section is lost put I only changed in my query the described value. Does any body can help me please ??
king regards
XML Parsing Error: mismatched tag. Expected: </svg>.
Location: http://localhost:7777/pls/htmldb/f?p=103:9:8795066316806762442:FLOW_SVG_CHART_R2476324075306576_de
Line Number 22, Column 1455:</style><script xlink:href="/i/javascript/svg_js_includes/svg_common/oracle.svgInit.js"/><script xlink:href="/i/javascript/svg_js_includes/svg_common/oracle.svgNodes.js"/><script type="text/ecmascript"><![CDATA[function svgSync(){window.reload();}function htmldb_Load(){try{oracleSvgInit(evt);throw "old version" }catch(er){}}]]></script><rect id="background" x="1" y="1" width="1022" height="398"/><text x="20" y="20" class="title">Chart 1</text><text id="XAxisTitle" x="50%" y="390">Minute</text><text id="YAxisTitle" x="15" style="writing-mode:lr;" y="200" transform="rotate(-90,15,200)" text-anchor="middle">Messages</text><g id="legend" transform="translate(0,25)"><rect class="legend" x="1" y="0" width="1022" height="60"/><g class="legenditem" transform="translate(20,18)"><line x1="0" y1="-5" x2="-15" y2="-5" class="data1"/><text class="legend" y="0" x="2">ALL</text></g><g class="legenditem" transform="translate(20,36)"><line x1="0" y1="-5" x2="-15" y2="-5" class="data2"/><text class="legend" y="0" x="2">SMS</text></g><g class="legenditem" transform="translate(20,54)"><line x1="0" y1="-5" x2="-15" y2="-5" class="data3"/><text class="legend" y="0" x="2">LL</text></g></g><svg width="1024" height="400" viewBox="-5 -5 1024 400" preserveAspectRatio="none"> <text class="nodatafound" x="40" y="20">No data found.</text><text class="nodatafound" x="40" y="20">no data found</text><text class="nodatafound" x="40" y="20">no data found</text></g></svg><g id="infobubble" transform="translate(0,0)" style="visibility:hidden"><rect id="infobackground" rx="2" ry="2" x="0" y="0" width="100" height="20" fill-opacity=".9" fill="#FFFFFF" stroke="#000000" stroke-width="1"/><text id="infotext" x="5" y="12">-</text></g></svg>
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------^

I found the solution:
No data resulting to the query !!

How to use bulk collect into clause

hi all,
i have requirement like this i want to change the query by passing the different table names in oracle database 10gr2.
like if i use first i pass the scott.emp table name select * from scott.emp;
then i want pass scott.dept table name select * from scott.dept;
using select * option in the select list.
how can i execute it.
give me any solution.
please reply....

Hi,
i recently also ran into some serious trouble to make dynamic sql work.
It was about parallel pipelined function with strongly typed cursor (for "partition ... by hash(...)").
But in addition requiring dynamic SQL for the input to this cursor.
I couldn't make it work with execute immediate or something else.
So i used another way - I translated dynamic SQL into dynamically created static SQL:
1. create a base SQL data object type with abstract interface for code (e.g. some Execute() member function).
2. dynamically create a derived SQL data object type with concrete implementation of Execute() holding your "dynamic SQL" "in a static way"
3. delegate to Execute().
Let me quote my example from comp.databases.oracle.server, thread "dynamically created cursor doesn't work for parallel pipelined functions"
- pls. see below (it's an old one - with likely some odd stuff inside).
It might sound some kind of strange for DB programmer.
(I come from C++. Though this is not an excuse smile)
Maybe i just missed another possible option to handle the problem.
And it's a definitely verbose.
But i think it's at least a (last) option.
Actually i would be interested to hear, what others think about it.
best regards,
Frank
--------------- snip -------------------------
drop table parallel_test;
drop type MyDoit;
drop type BaseDoit;
drop type ton;
create type ton as table of number;
CREATE TABLE parallel_test (
id NUMBER(10),
description VARCHAR2(50)
BEGIN
FOR i IN 1 .. 100000 LOOP
INSERT INTO parallel_test (id, description)
VALUES (i, 'Description or ' || i);
END LOOP;
COMMIT;
END;
create or replace type BaseDoit as object (
id number,
static function make(p_id in number)
return BaseDoit,
member procedure doit(
p_sids in out nocopy ton,
p_counts in out nocopy ton)
) not final;
create or replace type body BaseDoit as
static function make(p_id in number)
return BaseDoit
is
begin
return new BaseDoit(p_id);
end;
member procedure doit(
p_sids in out nocopy ton,
p_counts in out nocopy ton)
is
begin
dbms_output.put_line('BaseDoit.doit(' || id || ') invoked...');
end;
end;
-- Define a strongly typed REF CURSOR type.
CREATE OR REPLACE PACKAGE parallel_ptf_api AS
TYPE t_parallel_test_row IS RECORD (
id1 NUMBER(10),
desc1 VARCHAR2(50),
id2 NUMBER(10),
desc2 VARCHAR2(50),
sid NUMBER
TYPE t_parallel_test_tab IS TABLE OF t_parallel_test_row;
TYPE t_parallel_test_ref_cursor IS REF CURSOR RETURN
t_parallel_test_row;
FUNCTION test_ptf (p_cursor IN t_parallel_test_ref_cursor)
RETURN t_parallel_test_tab PIPELINED
PARALLEL_ENABLE(PARTITION p_cursor BY any);
END parallel_ptf_api;
SHOW ERRORS
CREATE OR REPLACE PACKAGE BODY parallel_ptf_api AS
FUNCTION test_ptf (p_cursor IN t_parallel_test_ref_cursor)
RETURN t_parallel_test_tab PIPELINED
PARALLEL_ENABLE(PARTITION p_cursor BY any)
IS
l_row t_parallel_test_row;
BEGIN
LOOP
FETCH p_cursor
INTO l_row;
EXIT WHEN p_cursor%NOTFOUND;
select userenv('SID') into l_row.sid from dual;
PIPE ROW (l_row);
END LOOP;
RETURN;
END test_ptf;
END parallel_ptf_api;
SHOW ERRORS
PROMPT
PROMPT Serial Execution
PROMPT ================
SELECT sid, count(*)
FROM TABLE(parallel_ptf_api.test_ptf(CURSOR(SELECT t1.id,
t1.description, t2.id, t2.description, null
FROM parallel_test t1,
parallel_test t2
where t1.id = t2.id
) t2
GROUP BY sid;
PROMPT
PROMPT Parallel Execution
PROMPT ==================
SELECT sid, count(*)
FROM TABLE(parallel_ptf_api.test_ptf(CURSOR(SELECT /*+
parallel(t1,5) */ t1.id, t1.description, t2.id, t2.description, null
FROM parallel_test t1,
parallel_test t2
where t1.id = t2.id
) t2
GROUP BY sid;
PROMPT
PROMPT Parallel Execution 2
PROMPT ==================
set serveroutput on;
declare
v_sids ton := ton();
v_counts ton := ton();
-- v_cur parallel_ptf_api.t_parallel_test_ref_cursor;
v_cur sys_refcursor;
procedure OpenCursor(p_refCursor out sys_refcursor)
is
begin
open p_refCursor for 'SELECT /*+ parallel(t1,5) */ t1.id,
t1.description, t2.id, t2.description, null
FROM parallel_test t1,
parallel_test t2
where t1.id = t2.id';
end;
begin
OpenCursor(v_cur);
SELECT sid, count(*) bulk collect into v_sids, v_counts
FROM TABLE(parallel_ptf_api.test_ptf(v_cur)) t2
GROUP BY sid;
for i in v_sids.FIRST.. v_sids.LAST loop
dbms_output.put_line (v_sids(i) || ', ' || v_counts(i));
end loop;
end;
PROMPT
PROMPT Parallel Execution 3
PROMPT ==================
set serveroutput on;
declare
instance BaseDoit;
v_sids ton := ton();
v_counts ton := ton();
procedure CreateMyDoit
is
cmd varchar2(4096 char);
begin
cmd := 'create or replace type MyDoit under BaseDoit ( ' ||
' static function make(p_id in number) ' ||
' return MyDoit, ' ||
' overriding member procedure doit( ' ||
' p_sids in out nocopy ton, ' ||
' p_counts in out nocopy ton) ' ||
execute immediate cmd;
cmd := 'create or replace type body MyDoit as ' ||
' static function make(p_id in number) ' ||
' return MyDoit ' ||
' is ' ||
' begin ' ||
' return new MyDoit(p_id); ' ||
' end; ' ||
' ' ||
' overriding member procedure doit( ' ||
' p_sids in out nocopy ton, ' ||
' p_counts in out nocopy ton) ' ||
' is ' ||
' begin ' ||
' dbms_output.put_line(''MyDoit.doit('' || id || '')
invoked...''); ' ||
' SELECT sid, count(*) bulk collect into p_sids, p_counts ' ||
' FROM TABLE(parallel_ptf_api.test_ptf(CURSOR( ' ||
' SELECT /*+ parallel(t1,5) */ t1.id, t1.description,
t2.id, t2.description, null ' ||
' FROM parallel_test t1, parallel_test t2 ' ||
' where t1.id = t2.id ' ||
' ))) ' ||
' GROUP BY sid; ' ||
' end; ' ||
' end; ';
execute immediate cmd;
end;
begin
CreateMyDoit;
execute immediate 'select MyDoit.Make(11) from dual' into instance;
instance.doit(v_sids, v_counts);
if v_sids.COUNT > 0 then
for i in v_sids.FIRST.. v_sids.LAST loop
dbms_output.put_line (v_sids(i) || ', ' || v_counts(i));
end loop;
end if;
end;
--------------- snap -------------------------

ERROR INTO clause is expected in SELECT

Similar Messages

Maybe you are looking for