Error loading data into PSA (Exception in SM58)

Hello,
I have a problem to load data from a SAP ERP 6.0 into a (new) SAP BI 7.3 System. I created a DataSource in the ERP system and try to load the data into a PSA. Now, when I start the data load of my InfoPackage, I get following result:
After that nothing further happens. Then I checked SM58:
Does this error look familiar to anybody? I'm wondering why the "Target System" column is empty. Maybe there are some basic settings missing?
Thanks in advance!
Regards
Václav

Hi Raman,
The requests are marked as successful in SM37.
RequestId from InfoPackage Monitor:
And the corresponding job in SM37 (ECC system):
So this part seems to be fine. What else can I check?
Thanks & regards
Václav

Similar Messages

Error Loading Data into a flat file

I am recieving the following error when loading data into a flat file from a flat file. SQL 2005 is my back end DB. If I cut the file iin half approx 500K rows my ODI interface works fine. Not sure what to look at.. I rebuit the interface which before was just dying giving no error and now I am getting this.
Thanks
java.lang.Exception
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Figured it out, found similar post that stated changing the HEAP size
Increase the page size in odiparams.bat in the bin folder and restart Designer.
For eg:
set ODI_INIT_HEAP=128m
set ODI_MAX_HEAP=1024m

Error loading data into ODS object

Hi,
I am trying to load some data into an ODS object, which actually does not seem very difficult. I got the InfoObjects and structure of the ODS object all set up. Transfer rules are defined and I succeed in loading the data into PSA.
From there i trigger the forwarding into the ODS object. And this is what i get (I use the BI in German, so maybe the translations are not 100% correct):
message missing: tranfer rules finished.
seems like the system does not get a esponse as to whether the transfer rules are worked through yet. this results in a timeout because nothing happens.
i'm sorry i cant give any more detailed information. maybe someone can give me a direcion in which to search for mistakes. irebuilt the transfer rules and compared with others, and found nothing. still the same problem...
cheers,
stefan

Oh yeah, that error message i've been talking about was actually a note in the details of the monitor.
you can see it here:
http://www.fape.info/files/data_transfer_monitor_details.bmp
let me give you some translation.
- status: some error occured.
-- data request, ok
-- extraction, some error
-- transfer
****data packet 1: received in bw, data not processed yet
****data packet 2: ...
****data packet 3: ...
-- processing
--- data packet 1:
++++ transfer into PSA, no problem
transfer rules: error
******processing started
******missing response: transfer rules complete
i hope this gives an idea.
i couldn't come up with any solution so far. don't know why this response is missing after the processing of the data started.

Error in loading data into PSA from source system.

Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.

Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman

Error while loading data into PSA from data source

Hi Experts ,
I am loading purchase order history data from standerd datasource 0SRM_TD_CF into PSA using infopackage.However,whenevr I run infopackage,the call monitor shows the status as yellow.I monitored the process for half an hour but it never ended.I have verified following things from my side.
1.Checked whether datasource is properly replicated into BI system.
2.Checked if source system contains data.
3.Since i am loading transaction data,I have kept update as "initialize delta process"
Please let me know whether I am missing anything.
Regards,
Mandar.

Hi mandarha,
Do the following steps
1)Check the job log in source systems.
2)Check the Data Source in RSA3(Extracter checker) on Source systems side.give DS name press enter then execute,If there is no issue with DS,it will give pop-up with records.If it has any errors first rectify it and then load it again.
3)In details tab of IP,check whether extraction completed or not.
4)Are you running the IP with option "Intialse with data trasfer" or "Without data transfer"
If you running with data transfer and without data selection,usually it will take time based on the volume of historical data.(to find how many records it picks do the 2 step)
Hope this helps
Regards,
Venkatesh.

Error loading data into Essbase from the SQL Server

Hello experts!
I've got another urgent and confusing issue. I am loading data from an SQL Server view into Essbase (which is reversed with multiple data columns) using ODI 11.1.1.5 and I get the following error at +"3-Loading -SrcSet0-Load Data"+ step:
ODI-1227: Task SrcSet0 (Loading) fails on the source MICROSOFT_SQL_SERVER connection.
+Caused By: java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Incorrect syntax near the keyword 'View'+
where "View" is the name of the dimension (non-data) column in the SQL view.
Please help me with any hints! Thank you so much!

John, thank you so much!
Your answer is exactly correct!
"View" is an object name in SQL Server so this word cannot be used as a column name in SQL Server tables. Once the name of the colunm changed from "View" to another, the interface runs without errors!

Error Loading data into ODS from ODS

I have a loading problem wen trying to load data fro an ODS to another which has a start routine in the Update rules.
the errors are as follows.
ERROE 7 when sending IDOC
&INCLUDE INCL_INSTALLATION ERROR
&INCLUDE INCL_INSTALLATION ERROR 7
&INCLUDE INCL_INSTALLATION ERROR 2
&INCLUDE INCL_INSTALLATION ERROR 5
Connection Closed (no data) 4
Connection Closed (no data)
Connection Closed (no data) 6
Error in Source System.
But there are lot of data in the loading ODS
Please help me

Hi,
Please check the following OSS notes.
Note 610938 - Error 7 during transfer of an IDoc into BW
Note 610246 - Error 7 when sending an IDoc
Regards.

Cannot load data into infocube in BW NW2004s sneak preview

For BW with NW2004s preview.
I can load data into PSA but there is an error happens when loading data from PSA to infocube using DTP. The error is as 'Join table TESTDATRNRPART0 does not exist - read SAP note 871084'. In note 871084, it says the SP05 fix the problem. But I check the status of the BW server, it is 'release 700 / level 0005 / highest support package SAPKW0005'.
Does it mean the BW server has SP05?

Hi Parvendar and Vinod,
Thanks for the information. I checked in SM58. For today it shows 4 TRFC. 1 with user bwremote and 3 with user BASIS(the user i am logged in as). All have error saying "An exception occurred that was uncaught".
I also tried to reschedule the Data for the infopackage alone. We are having 3 infopackages in the process chain and I tried iwth one of them.
When i scheduled it, the Infocube -> Manage shows the status of the request as Yellow. When i try to see the Load monitor, it displays the same message as I saw yesterday.
In Extraction Phase it shows
Extraction (messages): Errors Occured
Data Request recieved - green
Data selection scheduled - green
41 Records Sent (41 Records received_) - yellow
Data Package1(41 records): Missing Messages - yellow
Date Selection ended - green
Transfer (Idocs and TRFC) Missing messages or warnings
Data package1: arrived in BW: processing: data packet not yet processed
Info IDOC1,2,3,4 are all green
Update PSA, Transfer Rules and Update rules are all green
Update (0 new/0 changed) : warning recieved
message missing: update finished for 0TCT_C21
Please let me know what could be the possible issue
Regards,
Raghavan
Edited by: Raghavan Guruswaminathan on May 11, 2010 8:10 AM

Error While loading the data into PSA

Hi Experts,
       I have already loaded the data into my cube. But it doesn't have values for some fields. So again i modified the data in the flat file and tried to load them into PSA. But while starting the Info Package, I got an error saying that,
"Check Load from InfoSource
Created       YOKYY on   20.02.2008   12:44:33
Check Load from InfoSource , Packet IP_DS_C11
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Pls help me in this......
With Regards,
Yokesh.

Hi,
After editing the file did you save the file and close it.
This error may come if your file was open at the time of request.
Also did you check the file path settings.
If everything is correct try saving the infopackage once and loading again.
Thanks,
JituK

While loading master data into PSA, the eorror is 'Error from PSA"

Hi All,
While loading master data into PSA, the eorror is 'Error from PSA"
Could you anybody please help in this reagard.
Thanx,
Sridhar.

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Urgent : Error while loading data from PSA to DSO

Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!

you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear.

Error loading data from bw table into BW system

Dear all,
I have created and fill z tables in bw system, and try to load data into same bw system.
What i am facing is error message saying "Error in module RSQL of the database".
and when i check st22 for dump analysis, it says:
Runtime Errors DBIF_RSQL_INVALID_RSQL
Exception CX_SY_OPEN_SQL_DB
how come?
Thanks

Can you try again by activating the generic datasource in RSO2. It should work.
And also make sure the tables are active.
Ravi

Error while loading Data into Essbase using ODI

Hi,
I am very new to ODI. I have installed ODI and working on Demo environment only. I havn't done any configuration. I am using Essbase Technology which is coming by default.
I have created one sample outline in Essbase and a text file to load data into essbase using ODI.
Following my text file.
Time     Market     Product     Scenario     Measures     Data
Jan     USA     Pepsi     Actual     Sales     222
I am getting the error. I have checked in Operator. It is giving at step 6 i.e. Integration SampleLoad data into essbase.
Here is the description.
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C3_C1 ""Time"",C5_C2 ""Market"",C2_C3 ""product"",C6_C4 ""Scenario"",C1_C5 ""Measures"",C4_C6 ""Data"" from "C$_0Demo_Demo_genData" where      (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
stmt.setFetchSize(srcFetchSize)
rs = stmt.executeQuery(sql)
#load the data
stats = pWriter.loadData(rs)
#close the database result set, connection
rs.close()
stmt.close()
Please help me to proceed further...

Hi John,
Here is the error message in execution tab....
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 20, in ?
java.sql.SQLException: Unexpected token: TIME in statement [select   C3_C1    ""Time]
     at org.hsqldb.jdbc.jdbcUtil.sqlException(jdbcUtil.java:67)
     at org.hsqldb.jdbc.jdbcStatement.fetchResult(jdbcStatement.java:1598)
     at org.hsqldb.jdbc.jdbcStatement.executeQuery(jdbcStatement.java:194)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx4.f$0(<string>:20)
     at org.python.pycode._pyx4.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
java.sql.SQLException: java.sql.SQLException: Unexpected token: TIME in statement [select   C3_C1    ""Time]
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Error in loading data from PSA to masterdataTables by using ProcessManually

Hello,
While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
Can anyone pls help me in solving this issue.
Thanks,
Soujanya

Hi Soujanya,
If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it. Otherwise, you could receive error messages during data load.
I hope this helps you.
Regards,
Maximiliano

Getting an error while trying to load data into cube

Hello,
I am trying to load data into cube but it gives me following error:
fiscal year variant not expected.
Can someone tell what could be done on fiscal year
Cheers
Jim.

Hi,
May be you have not mapped anything to fiscal variant or not included fiscal variant in the cube but you have used fiscal period inside it.
You should load fiscal variant if you wanna use fiscal period.
Map fiscal variant to a constant K4 or from the source if present and then see the result.
Generally it is K4 except for FI-CO cubes .
In the transfer rules, select field '0fiscvarnt' 'Tp' click
Enter K4 for Constant................Save and Activate
Iam sure you'd fix the issue.
Regards,
Ray

Error loading data into PSA (Exception in SM58)

Similar Messages

Maybe you are looking for