Error Message B200 for Canon Pixma MG5320

I have an error message B200 on my Pixma MG5320 that says "Unplug power cord and contact service center."  I'm more than 100 miles from my nearest Canon service center.  Any fix for this error message other than to buy a new printer?  With the price of gas, driving 200 miles round trip to fix the printer really isn't feasible.  Thanks!

HP doesn't have any of the quality features that CANON has,
Printing, Scanning, etc. NO ! I don't work for Canon !
I have DEEP researched Epson, and HP, and it doesn't cut
it for me.

Similar Messages

  • Error code B200 for Canon printer MX459

    My Canon printer MX459 just keeps giving me the B200 support code every single time i turn it on 

    Hi jeraldmo,
    If resetting the printer did not resolve the B200 error, the printer will require servicing.  Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Canon PIXMA MX882 error message b200

    I just received an error message b200 and a message saying I should disconnect the power cord and contact a service center.  I did what some others did and removed the printhead and flushed it with water to clean it and put it back.  Didn't make a difference.  Also, when I turn on the printer, it makes a nasty scraping noise.  Does anyone know how serious this problem is?  Can it be fixed, or do I need to retire this one and get a new one.  If I get a new one, any recommendations.  I need the print, scan and fax functions and am willing to spend up to $200.  We usually don't print photos from the printer.  I need a working printer very badly since I use it for work.

    Hello,
    Please try unplugging the printer for at least 10 minutes.  If the issue persists at that point, the best thing to do would be to get in touch with our technical support team at http://bit.ly/Phone_Support for further assistance.  They will let you know of all the options you have.
    Thanks!
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have a B200 error message on my Canon MP560. I tried taking out the ink cartriges etc. to no avail

    I have a B200 error message on my Canon MP560. I followed the posting that said to take the ink cartriges out, lift the grey bar and remove the printer board. I did that, replaced it after a few minutes, replaced the cartriges, turned the printer off and unplugged it. After waiting well over 10 minutes, I plugged it back in and when it was turned it on, the same message came up. 
    Now what?
    Thanks,
    Jimmoclips

    I'm glad I was able to help.  I kind of wish mine hadn't worked because I ended up being one of the "lucky" individuals where my phone didn't restore from the backup and I lost all of my contacts, calendar appts, notes, etc.  It took me an extra 2 hrs last night to rebuild the next month worth of appts and try to rebuild my contact list from my yahoo contacts.  Oh well.  I will be getting an android at my next upgrade.  I'm tired of all of the BS that comes with owning an iPhone.

  • I have an error message 5100 on my Pixma MP470 what is that?

    I have an error message 5100 on my Pixma MP470 what is that?

    Dear Jhihath.
    Unfortunately, this error indicates that there is an internal hardware issue with the printer. 
    Please try the following to see if we can resolve your issue:
    1.  Turn the printer off.
    2.  Unplug the power from the printer for at least 5-10 minutes.
    3.  While unplugged, remove any paper from the unit.
    4.  Double check for any obstructions found in the unit or paper paths.
    5.  If no obstructions are found, plug the power back in and turn the unit on.
    If the issue persists, please contact our support group using the "Contact Us" link below for additional assistance.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

    Hi all,
    Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
    Anyway,
    I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
    Mine doesn't.
    I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
    As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
    I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
    I have had this phone for several years and it has never done this.
    It worked absolutely fine, until I loaded the latest version of iTunes it seems...
    Any suggestions?
    Many thanks

    ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
    (I use iTunes 11.1.5.5)

  • On my HP printer Officejet4620 I get an error message "waiting for printer to become available".  Help please?

    On my HP printer Officejet4620 I get an error message "waiting for printer to become available".  Help please?

    Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

  • Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location.  I've searched my hard drive and the file doesn't exist.  What to do?

    Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location.  I've searched my hard drive and the file doesn't exist.  What to do?

    This worked...found on a prior discussion:
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
    http://majorgeeks.com/download.php?det=4459
    From the link above (near the top of the page)....Under 'download locations'   click on 'download@majorgeeks'
    To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Restart your computer.
    Re-download Itunes (latest version form Itunes website) and install.  It worked!

  • Had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I rest

    I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.

    Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
    There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
    If not, you must reinstall your CS4 suite.  You don't need to delete your preferences, so it should be the same as before.
    Error "Licensing has stopped working" | Mac OS
    Gene

  • Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working  you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

    trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working  you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
    I already Uninstalled and reinstalled the product and it still does not work.

    Hi,
    Try to uninstall the software again and you have to manually
    Delete the following folders:
    [Startup Disk]/Library/Application Support/Adobe/Adobe PCD
    [Startup Disk]/Library/Application Support/Adobe/caps
    [Startup Disk]/Library/Application Support/Adobe/backup
    [Startup Disk]/Library/Preferences/FLEXnet Publisher/
    [Startup Disk]/Library/Application Support/FLEXnet Publisher/
    Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
    After that try to run the cleaner tool as mentioned by kglad.
    Restart machine and then try to install again.
    *** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

  • Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked.  However, when I downloaded the same two drivers on Mac Book Air, neither worked.

    Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked.  However, when I downloaded the same two drivers on Mac Book Air, neither worked.

    I wasn't aware that VueScan charged a yearly license.
    You simply launch Image Capture and if the scanner is recognized it will be listed in the SHARED list in the left display column.  Select the scanner name and the app will start an overview scan.  You will also see a list of scanning options in the right display column (resolution, paper size, file output format, etc.
    The above description is when everything is working correctly, which has been the case for me.
    Good luck.

  • Can't install win7 scanner driver for canon pixma mp260, help please !!!

    can't install win7 scanner driver for canon pixma mp260, help please !!!

    HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

  • LIV - credit memo : error message shown for unit price variances

    hi
    In LIV for Credit Memo, there is no warning nor error message shown for unit price variances (price different from that in PO).  Request not allow to have unit price variances for Credit Memo. pls advice how can i do it
    thanks

    Hi,
    If you are posting a credit memo against a PO you cannot post it for MORE than the value of the PO, the system gives you the message that says something like, the value entered is higher than the PO value and so the PO value has been used.
    Is this giving you a particular problem?
    remember that youare generating the credit memo and so you can ask the vendor for whatever you want (although you may not actually get it). It is not like entering an invoice where the vendor is specifying the values.
    Steve B

  • Further error messages exist for this transaction

    Hello all ,
    i am getting en error message "Further error messages exist for this transaction" while creating an opportunity from external  number ranges
    please help me out how to solve this.
    Regards
    Ahmad

    Hi Mohammad,
    There might be any error transaction so there suppose to be an error insystem status. If you are able to generate opportunity number after saving than please do check in GUI with transaction crmd_order and check the message detail and revert.message detail is needed in order to proceed further.
    Thanks,
    Prem

  • Quick Menu Software for Canon PIXMA MX452

    Whenever I click on the Quick Menu program for the subject product, I get the following error message:
    Canon Quick Menu has stopped working.  A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.
    I have uninstalled and reinstalled the driver and Quick Menu software several times, from both the disc provided and on-line downloads.
    I have turned off my anti-virus/firewall program and also told the security program that the Canon program is a trusted application.
    I am able to print/scan/copy, but not from the Quick Menu, which is more convenient.
    Please help.
    Solved!
    Go to Solution.

    Hi clarkdjensen,
    There may be a third party scanner driver interfering with Quick Menu.  Please try the following:
    1.  Click 'Start' and then 'Computer'.
    2.  On the left-hand pane, click the down arrow beside Local Disk (C: ).
    3.  Click the down arrow beside Windows to open the folder
    4.  Highlight the twain_32 folder.
    5.  The folder should have 2 folders that start with PIXMA MX452 and a file called wiatwain.ds.  Any other folders or files should be dragged to the desktop. 
    6.  Reboot the computer and try scanning again.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for