Error message - could not connect to aim - too many attempts to login

Today when I tried to iChat, I got a message I haven't seen before. The error message reads "You have attempted to lgin too often in a short period of time. Wait a few minutes before trying to login again." I did notice my window continuing to try and login -- not sure why it wouldn't. I did install a new router yesterday and my internet works fine. Would this have some impact on iChat? Or are there certain settings I might need to change?

Hi,
If you are on 10.6.x did the port change stick ?
SSL tends to have to be On and the Enter key needs to be used to "Set" the port.
On the Netgear access the WNA set up page.
Turn Off the Port scan and DOS (Or SPI) and Disable the Ping Blocking.
(Apply/Save Settings)
9:12 PM Tuesday; May 4, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

PC Suite - E60 - Error Message "Could not connect ...

Hi Everyone!
PC Suite displays that the phone (E60) is connected via Bluetooth. No problem there, but I still cannot connect to the phone.
I upgraded (clean install) to the last version because I often had problems when I pressed "Messages" or any other item in the PC Suite that would connect to the phone.
Always the same message "Could not connect to the phone" would come up.
Often the error went away by simply restarting the notebook (Dell 640m).
Now that I've upgraded I cannot connect to the phone at all, which is strange because according to PC Suite I am connected. Also the pairing on the phone shows the notebook as usual.
Any hints what the problem could be?
I reinstalled PC Suite and all other software connected to it several times (also went back to 6.83), always using a registry cleaner, also used the repair feature. Now neither 6.83 nor 6.84 can connect to the phone.
Thanks in advance for any help!
Here the sys info:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.84.10.4
Language: English
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Microsoft Outlook:
Version 10.0
Build 6822
Bluetooth stacks:
WIDCOMM Bluetooth stack
Version 5.0.1
Build 2609
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180

There are numerous posts in this forum (and any other forum out there) about the problems Windows PCs have about the fact that in XP there is Microsoft provided native Bluetooth software and then for a reason or another you have installed the Widcomm Bluetooth (or that may have even been installed by the PC vendor)
Those Bluetooth softwares conflict with each other and particularly it is difficult fot PC Suite to use those 2 softwares simultaneously. PC Suite dores not know itself if the phone is "present", it knows about the connected phone only if the Bluetooth software in the PC tells that info.)
I had that same situation, it worked (kind of), but PC boot and stand by etc, always caused problems.
Search for "uninstall widcomm" in this forum and you will find many posts about the topic. most likely also you will find instructions how to disable widcomm and lett Microsoft Bluetooth Enumerator take over.
But read the posts first since I do not know which setup you would prefer. Also, while I briefly looked at the posts there at least has been some talk about anti-virus programs interference with Bluetooth softwares, but I am not sure if that is relevant anymore.

ITunes error message: Could not connect to store...The host is down

I keep on getting this error message when I try and log into the itunes. Has anyone else gotten this message before? I don't know what to do

Hi tgflare,
If you are having difficulties connecting to the iTunes store you may want to go through the troubleshooting steps detailed in the following article -
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for using Apple Support Communities.
Best,
Brett L

Could not connect to AIM

Hi everybody,
I have been having a problem connecting to the AIM server for iChatAV for the past few days, and have read through the various discussion forums but I still cannot solve the problem. The full error is "Could not connect to AIM: The connection to the host was unexpectedly lost."
I have tried to change the firewall settings on the Netgear router, I have tried to connect directly using the Motorola modem, still nothing.
I also have my laptop with ichat installed which worked a couple of weeks back...this also fails, so this leads me to believe that it may be a network configuration problem that I have. The ISP assures me that this is not the case, and the Apple helpdesk are also stumped. Any ideas?
imac Mac OS X (10.4.3)
imac Mac OS X (10.4.3)
imac Mac OS X (10.4.3)

Hi,
Apparently there has been a problem with .mac accounts and the link to the AIM Servers. This has caused some people problems with logging on to the AIM network.
One though occures to me at this stage. Does the password for your .mac account have more than 16 characters ?
If it does reduce to it to at the most 16. .mac can have over 20 characters to the password but AIM only allows 16 Max.
If this is not the problem go here http://www.apple.com/support/dotmac/ and report the problem.
Ralph

Could not connect to AIM - Help

I have a .mac account and I set up a AIM account at home on my desktop. I tested out ichat with my laptop at a wireless Starbucks and my wife at home at it worked great. I am at Detroit now in a Marriot Hotel using their WIFI in the lobby and everytime I open ichat I get the message, "Could not connect to AIM" The connection to the host was unexpectedly lost. Any help would be appreciated.

Hi
Try logging on to AIM on port 443 rather than port 5190.
Go to IChat in the menu bar > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443.
Log back in again.
Tony

Could Not Connect To AIM error message-Phooey!

I am getting the Could Not Connect To AIM msg whenever i try to log on to ichat. My flatmate who has an account on this G4 powerbook, is not having the same problems...I've gone into his account and it's all up and running, but when i log back into mine, i get said message...
I have repaired permissions
Deleted prefs
Any other tips?
oh, I'm on latest versions of tiger and ichat.
Thanks!

Are you using a .MAC account by chance? If so: Ryan M., "AIM working, .mac is not..." #15, 12:21pm Sep 16, 2005 CDT

Just purchased anew ipod touch cant connect to i tunes error message "could not sign in therewas a problem connecting to the server"

just purchased a new ipod touch when i tried to activate it and access itunes iget an error message "could not sign in there was a problem connecting to the server" anyone else have this problem? thx

figured it out needed to use my password for my wireless router so the ipod could access my wifi.

How to fix ipad error -1004 "could not connect to the server"

I am trying to access the tablet edition of Vanity Fair. I already have a subscription and when I click on the "Tap here for acces to the tablet edition" it takes me to a screen & this error message pops up:
Cannot Open Page
This page cannot be opended because of an error
This error is "Could not connect to the server."(-1004).
I have deleted, reinstalled via itunes on my mac, done a hard restart and nothing seems to be working. I can browse the web using safari and am connected to the internet via wifi.
Any suggestions?

I have the same issue, too. My New Yorker subscription is fine, always has been. But my Conde Nast Traveler subscription won't work. I can get to the screen where you enter your information (either with name and address or subscription number and zip code), but once I press Continue I get the error.
I emailed Conde Nast's customer service, and this is what they said:
Dear Subscriber:
Please accept our sincere apologies for the inconvenience you have
experienced.
We have applied a fix to the app for the server error and you will need
to close and re-open your app. To do so, please double click the "home"
button to close the running app and then re-open your app.
Please let us know if you still experience any problems.
If you should need further assistance, please be sure to include all
previous e-mail correspondence.
Thank you for your interest in Conde Nast Traveler.
Sincerely,
Shar
That didn't work. I tried the restarting the iPad, as someone here suggested, but that didn't work, either. Interesting that this seems to be a Conde Nast issue - my NY Times and National Geographic subscriptions are just fine, too.
I'm afraid I'm not sure what the guidance in this knowledge base article means: "Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software." How does one do that on one's iPad?
I actually wonder if it's a firewall issue. Are any of you attempting to enter this information at work, for example? I am, and my company has a firewall/proxy that gives me issues sometimes. I'm going to try to find a wifi hotspot at lunch to see if it'll work there.

Could not connect to AIM. Change port doesn't help !

I have been using ichat for about three months without any problems.
It is tonight (22/10/06) that I cannot login while I was able to connect to the server in this morning. Nothing has changed in my router configuration.
The error message is "Could not connect to AIM. The specified host cannot be located.
I did search the forum here. The suggested solution is to change ichat port to 443 or 5191. It does not work for me.
At first I thought the server was busy. But I changed my mind since my friend can login.
My internet connection works normally. Nothing seems broken.
Oh another thing is both my username before @mac and passwords is 9 characters.
Please help.
Macbook Mac OS X (10.4.7)

Hi Omegaxxx,
At this stage I would try this.
Down load IPNetMonmitorX
It is free as a trail for a number of days.
Get it to do Port Scans on the UDP ports that iChat uses.
Do these one at a time for Ports 5060, 5190 and 5678 and then repeat for the group of twenty (16384-16403)
Now test it for TCP port Scans. (just port 5190 for AIM/@mac)
This will be the one to tell if the Login is working or not.
Repeat for any other port you have tried iChat to login with. (The AIM servers will allow login on almost any port: 443 is regarded as more secure as it is used for some Mail apps)
You will need to test to a specific IP address.
Use the ones listed by Ryan above.
If you are on a University or other large campus like a large business it may be that they have blocked the ports at a fairly local level.
If you opened the ports in your connection device with Port Forwarding and it is also using DHCP then check your computer is at the same IP that the Port Forwarding is pointing to.
9:23 PM Friday; September 22, 2006

HT1212 IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Could not connect to AIM possible workaround

I've been getting the "could not connect to AIM server busy" error message and had tried all the fixes I can find on here, trashing preferences, changing ports, connection speeds and nothing worked
After hours of messing about I have found a way I can now log in which anyone experiencing this error might want to try.
Go to your Buddy List and use the "disconnected" drop down box, select "edit status menu" , i deleted all the unneeded custom status messages and unchecked "remember custom messages.
I then went back to the Buddy List>disconnected drop down and selected "custom" which opens a small dialogue box, don't type anything in but whilst that is open go back to the Finder, ichat menu and drop down to "log into AIM" or command L that got me logged in for the first time in days!!. It doesn't work every time, I occasionally have to go to buddy List>edit status menu leave that open then >Finder >Ichat menu > log into AIM ( or command L) and that works.
Very very frustrating but at least I can get back on line.

I've only ever used ichat , fast user switching is enabled with set my status to office on switch, when I quit ichat and restart my status is "disconnected" and as soon as I restart I get the error message immediately it tries to log me in.
I use ichat infrequently ( only when I am working abroad) and never had the problem last time I used it in March, I've always kept the OS up to date so assume its caused by one of the updates since then. After 4 days use I'm now occasionally being able to get logged back in without going through the status change procedure ( not possible when I first started using it) but still cannot guarantee a log in using the method I described sometimes I have to do 3 or 4 status change drop down/log ins before it connects.
I'm connected via hotel internet connection so don't know what the router settings are.

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

Hi there, i erased my macbook and trying to reinstall it, i keep getting an error message"could not find installation for this machine" please what can i do?

Hi There,
I erased my macbook and trying to reinstall it, i keep getting an error message "could not find installation for this machine" what must i do please?

It is the internet connection.
Try again or another internet connection.

Connection Error: DE could not connect to the activation server. Pls make sure u r connected to the internet.

Yes, I am connected... how else could I write this?
Adobe chat doesn't help. Adobe Tech doesn't help!
I purchased a book and I want to read it!!! HELP!
Also, since this is the first book I have downloaded there is not "de-authorize" option.
Thanks.

yes... uninstall 4.0... go to download site... scroll down and download 3.0install 3.0 and authorize computer than you can upgrade to 4.0
Connection Error: DE could not connect to the activation server. Pls make sure u r connected to the internet.
created by readingjenn in Adobe Digital Editions - View the full discussionI am also having the same issue. Following to see if you get an answer. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063023#7063023 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063023#7063023 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Digital Editions by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Error message - could not connect to aim - too many attempts to login

Similar Messages

Maybe you are looking for