Error message in web form

In the web version of my form the message FRM-40200 field protected from change does not appear (show in CS).
Any idea why not. or if there are other messages that won't show.

I fixed this by going into the IIS web server admin and seeing a node that the deployment started to make. I right-clicked on it and selected Edit Permissions, then I clicked on the Security tab. I then clicked the edit button and it came up with a message
telling me to click ok to reorder the permissions. After it was done I right-clicked on the root node and selected refresh. I then closed Visual studio and tried the publish again.
Unleash the Power - Get the LightSwitch HTML Client book
http://LightSwitchHelpWebsite.com

Similar Messages

Error message "Not Well Formed." Can this be repaired?

Help!
I have been attempting to open an InCopy (CS6) file, but it will not open. Instead, I get this error message:
"Not Well Formed"
Is there any way to repair this file? It was checked in and saved normally. If it cannot be repaired, I will lose about 1 month's worth of work because my backup has failed. I would appreciate any guidance

Firefox has no built-in email features, if you are using Firefox to access your email it will be a web based email service and email features will be part of the email service. You will need to check with the support for the email service for how to do this.
If this questions is about Thunderbird, for Thunderbird support you can ask in one of these forums:
* http://forums.mozillazine.org/viewforum.php?f=39
* http://getsatisfaction.com/mozilla_messaging

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

How to display an error Message in Web Dynpro

Hello,
I want to display an error message in Web Dynpro. I'm using this,
IWDMessageManager message = wdComponentAPI.getMessageManager();
message.reportSuccess("<some relevant debug message>");
However, the message is always shown at the bottom of the screen. It is possible to select the location in the screen for showing this object? Or what is the best way for doing this? I've tried to use a Label but I can't set the type (warning, error, info) it's only a message.
Thanks
Regards
SU

Hi,
If you include the UI, it will display at the top of the screen..
Please see below how to create a message in the message editor.
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
and this is how you access the error message in the application ti display it to the end user
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Ganesh N

After starting my computer today and trying to visit and open bookmarked web sites, I cannot open them because I am getting this error message: This web site does not supply identity information. What happened? How do I fix it? Thanks

Today, when I tried to open web sites in Firefox from my Bookmarks, I could not. I continually received the following error message: This web site does not supply identity information.
I noticed that when I put the cursor on the box to the left of the address, that message appears. There is also '''no''' https:// before the address.
Can anyone help correct this problem? I believe sometime last week I may have fiddled with the Secutity settings in the Tools/Security option box and may have screwed up something trying not to have sites use cookies to track me?
Thanks,
Bob

You can set the pref browser.urlbar.trimURLs to false on the about:config page to see the http: protocol.
You can set the pref browser.urlbar.formatting.enabled to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Error Messages in Web UI

Hi Experts,
How do I throw errors in web UI. I am enhancing a component/view. I want to display errors if some conditions don't satisfy.
Warm Regards,
Abdullah

Solved it this way.
Credit to Fabian Joiris and his reply in this [thread|Show BAdI error message in Web UI]. I could not understand his thread earlier though.
DATA:
lr_global_messages       TYPE REF TO cl_crm_genil_global_mess_cont,
lr_core                  TYPE REF TO cl_crm_bol_core.
lr_core = cl_crm_bol_core=>get_instance( ).
lr_global_messages ?= lr_core->get_global_message_cont( ).
CALL METHOD lr_global_messages->add_message
   EXPORTING
     iv_msg_type       = 'E'
     iv_msg_id         = 'ZCRM'
     iv_msg_number     = '000'
     iv_msg_text       = 'Error Message'
     iv_show_only_once = 'X'.
Warm Regards,
Abdullah

Raise_application_error is not displaying error message in my form

Hi,
I have created one procedure in order to display the error message in front end forms.But which is not display the error message in my form when call the procedure.
Please refer the code.
BEGIN
IF C_ERR%ISOPEN THEN
CLOSE C_ERR;
END IF;
OPEN C_ERR;
FETCH C_ERR INTO M_ERR_ARB_DESC;
CLOSE C_ERR;
RAISE_APPLICATION_ERROR(-20001,P_ERROR_CODE||' - '||M_ERR_ARB_DESC);
END;
Thanks & advance
Regards
Maran

Hi,
-------form program unit------
PROCEDURE RAISE_APP_ERR(P_ERR_CODE NUMBER) IS
alert_button NUMBER;
Raise_Exception EXCEPTION;
PRAGMA EXCEPTION_INIT(Raise_Exception, -20001);
BEGIN
--- called backend procedure
PRC_RAISE_APPLICATION(P_ERR_CODE);
EXCEPTION
WHEN Raise_Exception THEN
alert_button := SHOW_ALERT('raise_alert');
If alert_button = ALERT_BUTTON1 Then
Raise FORM_TRIGGER_FAILURE;
End If;
END;
---------- db proc----
CREATE OR REPLACE PROCEDURE PRC_RAISE_APPLICATION(P_ERROR_CODE IN HRM_ERR_CODE.HEC_ERR_CODE%TYPE
) AS
CURSOR C_ERR IS
SELECT HEC_ERR_ARB_DESC
FROM HRM_ERR_CODE
WHERE HEC_ERR_CODE = P_ERROR_CODE;
M_ERR_ARB_DESC HRM_ERR_CODE.HEC_ERR_ARB_DESC%TYPE;
BEGIN
IF C_ERR%ISOPEN THEN
CLOSE C_ERR;
END IF;
OPEN C_ERR;
FETCH C_ERR INTO M_ERR_ARB_DESC;
IF C_ERR%NOTFOUND THEN
M_ERR_ARB_DESC := 'UNKNOWN ERROR ';
END IF;
CLOSE C_ERR;
RAISE_APPLICATION_ERROR (-20001, P_ERROR_CODE||' - '||M_ERR_ARB_DESC);
EXCEPTION
WHEN NO_DATA_FOUND THEN
RAISE_APPLICATION_ERROR (-20001, P_ERROR_CODE||'-'||'UNKNOWN ERROR ');
END ;
I tried the same but still i am not getting error message in Forms.

Error when launching web form

I'm trying to launch forms on the web using Dev Rel 6. When I
start the
browser and point to my html file, I get the standard "Starting
Java..."
message and then the error :
Applet exception: class oracle.forms.engine.Main could not be
loaded
I have setup my machine just as the manual suggests. Any ideas
on what the
problem could be.
My current configuration is:
Windows NT 4.0 (sp5)
OAS 4.0.7
Dev Rel 6
Netscape 4.5
Jinit 1.1.7.11
Thanks in advance for any help,
Alan
null

Hiya,
I'm working on deploying DEV2K forms/reports over the
web...starting with the Forms first...but haven't been able to do
that....scenario is that these forms are built in 4.5, OAS 3.0.1,
NT 4 (sp 3) & Oracle 8.0.4 (8.4)....I've done everything by the
book i.e; the Dev2K Online Manuals (Deploying Applications on the
Web)...but even after giving the full path of the intended
form/module it wont launch.....only gives Internel Error in the
browser....
In the manual Oracle recommends to use WWWSVR as the OAS default
listener but when you isntall the OAS (3.0.1) it recommended
using www as the default.....so I tried to change the
configuration of the def. list. & it got corrupted....so I
deinstalled the whole OAS but after that I haven't been able to
resinstall it again because it aborts right after
analyzing dependencies step....but I have another instance of the
OAS 3.0.1 running on a different machine on which our groups site
is running the database version 8.0.5 (haven't been able to
install the DAD for this one...because of database version or
some other unknown reason...)
Bottom line if you could please tell me step by step how to
deploy my current apps over the web I'ld really appreciate that..
Current env. NT 4 (sp3)
Oracle 8.0.5
Dev/2000 Forms4.5/Reports3.0
OAS 3.0.1 (trying to download OAS 4 but it after
the download wont open)
Thanks.
Dessislava Gantcheva (guest) wrote:
: Toby Richmond (guest) wrote:
: : D_niel Dobr_nszky (guest) wrote:
: : : Hi!
: : : Yes, JInitator can be a good idea. Doeas anybody heard
: : anything
: : : from JInitator for unix/mac/linux/etc?
: : : D_niel
: : Hiya
: : No I haven't, but I am yet another one of these people who
are
: : having major headaches getting Developer Server 6 working on
: : NT 4, with both applet viewer and jinitiator ...
: : jinitiator hangs when getting "default.dat" in registry
: : directory (this file does not exist)...eventually I get an
: : generic oracle error message saying cannot connect to server.
: : Any ideas???
: : Toby
: I had the same situation, Toby, but infortunately I don't
: remember how exactely I solved it (because of the many other
: problems I had :) I just can tell you that after patching
: everything possible it wrks now :) That's the sequence of the
: patches I applied:
: Initial configuration:
: NT4.0 Server, SP3
: OAS 4.0.7
: Developer/Developer Server 6.0
: Applied patches:
: 1. Patch 1 for OAS4.0.7
: After it forms on the web(Jinitiator 1.1.7.11) stoped working.
: 2. Patch 1 for Developer 6.0
: After it forms on the web started to work again.
: 3. SP5 for NT.
: 4. Jinitiator 1.1.7.15 ( I didn't observe any obvious
difference
: in its behaviour)
: And it works good now.
: If you try to patch the NT first, the forms don't work on the
: web again.
: that's my experience.
: Hope it helps
: My problem now i how to run a report within a form on the web.
: Separately forms and reports work fine.
: Regards
: Dess
: after it OAS starts
null

Error message in Web Intelligence:

Dear Experts,
At a client location we use Web Intelligence as a front end tool. We have build a new report on an existing universe, which worked very well for 2 days on dev. Today we got a error message when the data is refreshed in the WebI report (infoview). The error seems to be popping up at random. Please view the below error message:
Error MDDataSetBW.GetCellData.
Systemerror in application
CL_RSR_MDX_BXML_FLATTENING and form GET_DIMENSION_MEMBERS-00- (WIS 10901)
We use SSO authentication based on SAP user accunts.
System details:
Version of Business Objects?                          BO XI 3.1 FP2.4
Version of SAP Integration KIt?                         IK FP2.4
Version of your BW System?                           SAP NW 7.0 EhP.1 SR1
Version of SAP client?                                      SAP Gui Win7.10 (Comp 4)
Your help is highly appreciated!
Best regards,
Wart van Hoek

Hi Anil,
thank you for the hint. Anyway I already checked if a Universe refresh was needed, but it didn't.
My error is:
Error MDDataSetBW.GetCellData.
Systemerror in PROGRAM
CL_RSR_MDX_BXML_FLATTENING and form GET_DIMENSION_MEMBERS-00- (WIS 10901)
What I noticed is that it occours only if I access the report through SSO with a restricted user. Instead if I run it with a full authorization user, it works fine.
Moreover running corresponding MDX on MDXTEST (with the restricted user) I get a void structure (only colum name but no rows). So think there is also a trouble in how authorization are assigned.
So my main main doubt is why I get this error instead a "No authorization".
Thank you in advance.
Kind regards.
Roberto.
Edited by: Roberto G. on Jun 4, 2010 9:53 AM

I have ADOBE X reader installed in my systems. When I wanted to open an online pdf form, Mozilla puts up a error message and the form does not open.

When I try to open a online pdf form, I get a error message to close the reader and try it again. Sometimes, the message does not come but what I see is just a BLACK screen in Mozilla.

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Error shown in Web form doesnt pop up in Smartview

Hi
I have a web form where users enter data in runtime prompts and there is a validation which prompts an error if the user selects an year less than the current forecast year. This error is hanlded through a script and @return function.
Th errors popsup when the user selects the year in webform but if the same form is opened in smartview, and the user selects an year less than the forecast year, the error is not popping up.
Please suggest
Thanks

Are you still getting the error message? Can you see the error in Planning Job Console?
Regards
Celvin
http://www.orahyplabs.com

NO ERROR message Compare 2 form fields

Hi,
i use ADDT. I have a form with an Insert Transaction (login_usr, userRegistration).
I want to compare two E-mail fields (email_usr and email_usr2). To be sure people register their own e-mailadres). Only email_usr goes into the database.
I managed with the server behavior Compare Transaction fields.
But i don't see an error message like 'Check your e-mail adres' ??
thanks!

Hi,
i use ADDT. I have a form with an Insert Transaction (login_usr, userRegistration).
I want to compare two E-mail fields (email_usr and email_usr2). To be sure people register their own e-mailadres). Only email_usr goes into the database.
I managed with the server behavior Compare Transaction fields.
But i don't see an error message like 'Check your e-mail adres' ??
thanks!

Error message from web - when opening pdf files

Hi,
I receive the following error message a lot when I try to open an educational pdf file from the web. What do I need to do to 1. see, 2. print and 3. save these type of educational pdf files from the web? I am using a MacBookPro OS X.
Thanks for your help and sorry I could not find an answer on the forum.
Example: I try to import or download MIT18_06SCF11_Ses3.5sum 2.pdf onto my desktop - which seems successful. However when I try to open this file, I get the following error message.:
"Adobe Reader could not open 'MIT18_06SCF11_Ses3.5sum 2.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."

Yes i tried following your list of commands and got the same error from MyMathLab by Pearson Publishing or the other link. I'm beginning to wonder if they are protected.
As you probably guess - I am not computer savvy. I will take my laptop to school tomorrow and ask another student.
Thanks for your followup.

Error Message on Web Premium Suite while opening Acrobat that Adobe Acrobat was installed as part of a Suite

Can not open Acrobat Pro 9 out of my adobe creative suite 4 web premium. Keeps giving an error message. Adobe Acrobat was installed as part of a suite. To enable Adobe Acrobat start another component of this suite. I am running Windows 7 64 and already have the CS6 Premium Production Suite loaded on my computer. I really don't need to load all of the Web Premium since I have upgraded to CS6 programs but still need the Acrobat. My hard drive crashed and I've had to start all over again. This is the only glitch and it's becoming very frustrating.
Can't find a link to actually speak to someone at Adobe.

you'll need to install and open some other 32 bit cs4 app.

Error message in Web UI

Greetings
I am getting the following error message and ive tried numerous attempts to debug but i am not finding the problem. This message is displayed on the web page after i log in.
An error occurred during initialization of the application
An exception occurred during the internal HTTP communication
Exception Class     CX_BSP_WD_HTTP_RESPONSE_ERROR
Text:     HTTP answer has status 404
Additional Info:     Business Server Page (BSP) Error
Program:     CL_BSP_WD_STREAM_LOADER=======CP
Include:     CL_BSP_WD_STREAM_LOADER=======CM002
Source Text Row:     73
Any suggestions?

Hi,
I also experience this scenario. It prompts me with this error.
The runtime repository could not be interpreted
An exception occurred during the internal HTTP communicationException Class CX_BSP_WD_HTTP_RESPONSE_ERROR
Text: The HTTP Response Had the Status 403.
Additional Info: Forbidden
Program: CL_BSP_WD_STREAM_LOADER=======CP
Include: CL_BSP_WD_STREAM_LOADER=======CM002
Source Text Row: 61
Ive checked the authorization in SU01 but my account has SAP_ALL authorization.
Please help.
Thank you,
Ice

Error message in web form

Similar Messages

Maybe you are looking for