Error message on Delay Delivery

Hello my chamelle,
One user received an email from the server that a message has been delayed but this email also contains the name of every transport rules that exist in the organization.
From: Microsoft Outlook <[email protected]>
Date: 22 August, 2012 19:31:36 EDT
To: <[email protected]>
Subject: Delivery delayed:Dossier 500-80-016808-108
Delivery is delayed to these recipients or groups:
[email protected] ([email protected])
Subject: Dossier 500-80-016808-108
This message hasn't been delivered yet. Delivery will continue to be attempted.
The server will keep trying to deliver this message for the next 1 days, 19 hours and 55 minutes. You'll be notified if the message can't be delivered by that time.
Reporting-MTA: dns;danzka.newad.ca Received-From-MTA: dns;newad.com Arrival-Date: Wed, 22 Aug 2012 19:26:41 +0000 Final-Recipient: rfc822;[email protected] Action: delayed Status: 4.4.7 Diagnostic-Code: smtp;400 4.4.7 Message delayed Will-Retry-Until: Fri,
24 Aug 2012 15:26:41 -0400 X-Display-Name: [email protected]
Received: from SLIVOVITZ.newad.ca ([fe80::c4c0:63bb:761d:e6a]) by danzka.newad.ca ([10.1.1.181]) with mapi id 14.01.0355.002; Wed, 22 Aug 2012 15:26:41 -0400 From: "User Tamere" To: "[email protected]" CC: USER2, "USER3" Subject: CONFFIDENTIAL SHHOUTING
Thread-Topic: Dossier 500-80-016808-108 Thread-Index: Ac2Amow927bI0/+1RR+JA/IPR3z8dwAAHs3g Date: Wed, 22 Aug 2012 19:26:40 +0000 Message-ID: <[email protected]> Accept-Language: en-CA, en-US Content-Language:
en-US X-MS-Exchange-Organization-AuthAs: Internal X-MS-Exchange-Organization-AuthMechanism: 04 X-MS-Exchange-Organization-AuthSource: danzka.newad.ca X-MS-Has-Attach: yes X-MS-Exchange-Organization-SCL: -1 X-MS-TNEF-Correlator: x-ms-exchange-organization-originalsize:
1935704 x-ms-exchange-organization-originalarrivaltime: 22 Aug 2012 19:26:40.8682 (UTC) x-ms-exchange-organization-messagesource: StoreDriver x-ms-exchange-organization-messagedirectionality: Originating x-ms-exchange-forest-messagescope: 00000000-0000-0000-0000-000000000000
x-ms-exchange-organization-messagescope: 00000000-0000-0000-0000-000000000000 X-MS-Exchange-Organization-BCC: x-ms-exchange-organization-originalclientipaddress: 10.1.5.56 x-originating-ip: [10.1.5.56] x-ms-exchange-organization-originalserveripaddress: 10.1.1.182
x-ms-exchange-organization-messagelatency: SRV=SLIVOVITZ.newad.ca:TOTAL=0 x-ms-exchange-organization-hygienepolicy: Standard x-ms-exchange-organization-recipient-limit-verified: True x-ms-exchange-forest-rulesexecuted: danzka x-ms-exchange-organization-rules-execution-history:
TRANSPORT RULE NAME 1 TRANSPORT RULE NAME 2 TRANSPORT RULE NAME 3 x-ms-exchange-organization-processed-by-journaling: Journal Agent Content-Type: multipart/mixed; boundary="_007_2D6B6FAF9C6EE641BDCD88179328C70A3619A1F1slivovitznewadc_"
MIME-Version: 1.0 X-MS-Exchange-Organization-ContentConversionOptions: False;00160000;True;;iso-8859-1 X-MS-Exchange-Organization-MessageLatencyInProgress: LSRV=danzka.newad.ca:TOTAL=0;2012-08-22T19:26:41.989Z
Thanks for your help.
Marc

Hello,
Did the issue happen on internal users or external users?
From the notification email, we could find one key sentence:
The server will keep trying to deliver this message for the next 1 days, 19 hours and 55 minutes. You'll be notified if the message can't be delivered by that time.
I suggest you wait for the final status of the email delivery. If the email can’t be sent out, you will receive the NDR.
Best Regards,
Lisa

Similar Messages

Error message for over delivery quantity in case of batch split.

Hi All,
System is throwing error message if I try to to enter delivery quantity more than target quantity(order quantity) in case of standard process which is ok but in case of batch split when split line created (9000001 for line 10) and if go to item level in line item 900001 and enter delivery quantity more than target quantity system is giving only information message, still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massege as well. Delivery item category for all the line items is same and status B is assigned to over delivery in item category. Is there any standard way of achieving this or do we need any modification, if yes then what user exit need to use.
I searched alot about this in last three days but found only one thread which is unanswered, please provide your valuable suggestions. If this problem is discussed already and solved please provide me the link to that thread as I could't find any.
Thanks,
Davinder

Hi
Still line item 10 is giving error message but line 9000001 giving only information message, user want this to be a error massage as well.
I think it you can possible to change the Information message as Warning message.
Please go to SE91 put the Message Class XX (Ex:V1) there And in No. field enter the message number (Ex: If message no V1293 enter the number as 293)
AND
go for
where used in then select only Program >ok then Program will come select the Program > double click, you will l find the message with the Description.
Now with help of ABAP with just comment on these both the messages. Afterwards you will get the Error message.
Hope this will helps you
Dasaradha

User Exit and Error message creation at Delivery

Dear Friends,
I am capturing the penal rates and the amount received against the penal rates from the customer in the Z table.If the penal rates and the amount received from the customer is not matching the system should not allow to save the delivery and trigger an error message.
Can sombody let me know the user exit I need to use and how to define the error message.
Thanks
Isaac

Hi,
Check SAP Note 415716 - User exits in delivery processing. With this note you could know that you must be careful with the error messages in some userexits for delivery.
Regards,
Eduardo

I have an error message 0xc18a0406 (ink delivery failure)

How do you fix error message 0xc18a0406 for Photosmart C7280. I am using Windows 7. I can not find the answer in the Manual.

This is unhelpful answer from the HP support. What we have is a specific error code from a specific printer. Somewhere in the software, an engineer created this error message for a specific reason. What I get from this message is a generic: "I really don't know what the problem is, but if you reboot the system and the problem goes away, we're good right (The printer itself gives you that suggestion)? If not, its trash. Hope you're still under warranty. If not, go buy another printer." How many years of training did HP put this person through to give that answer? Perhaps it isn't a person after all? Perhaps it is just the auto responder to any question people have with an error code that begins "0x..."? Who is this person who's been responsible for so many posts and yet gets no Kudos? Isn't that a symptom of something wrong with customer support? Where is the button to say "No Kudos" or "Minus 1 Kudo for this post." It's unhelpful because it doesn't really help solve the problem or even indicate what the problem is. "Ink delivery failure" when the cartridges have been HP cartridges throughout the working life of this printer means it is a cheap printer made from cheap parts with software that is too complicated to debug completely. So it is stuck? Clogged? Broke? Unfixable? Comatose? Not worth explaining?
"Relax, its a $200 printer when new. To really fix it would require a $50 part and $100 in labor. Better to go buy a new one if your warranty has expired."
"But I've got $120 in ink cartridges for the **bleep** thing?"
"Think of those as collector items."
"Ugh, it seems that the half-life of HP printers has been declining for the last decade. Instead of needing to buy a new printer every 5 years its getting close to 5 months."
"HP Shareholders thank you."
"%&@#*)*$+"
"Can I help you with anything else? Perhaps you would like to see these beautiful photographs of smiling people and trees in a meadow?"

Error message while doing delivery

I am getting an following message while doing delivery
Material 20000019 doesnot exist in storage location DLPT 2120
Storage location was deleted since material was not maintained correctly
No Schdule line is due for delibery upto the selected date
Please guide me with the solution.

Dear Sanjay,
First of all, I would like to suggest to check the "Organizational Level" data, with which Material was created in T. Code: MM01.
Check the "Plant", along with "Sales Org" and "Dist. Chnl" in T. Code: MM02
Also, check the "Strorage Location" in T. Code: MM02
Select the Views: Sales: General Plant data/storage location and then go to organizational elements and enter the plant and storage location, save it.
Also, on to the same screen up there, in Menu-Bar:
Enviornment --> Sock Overview
It will lead you to Screen: MMBE
Check Stock for the Material.
Best Regards,
Amit
Note: I am a bit confuse with your statement:
Storage location was deleted since material was not maintained correctly
Do you mean that, You have removed "Strorage Location - DLPT 2120" from the Material Master "20000019"?

Error message KI248 on delivery document when posting goods issue

Hi,
On the delivery document, when posting goods issue I get the following message:
"Account 60700000 requires an assignment to a CO object
Message no. KI248
Diagnosis
All given account assignment objects (order, project) are defined as statistical.
System Response
Statistical orders or projects are ignored when FI and CO are reconciled. You must enter a cost center, order, project, or cost object to which the costs are posted for CO postings.
Procedure
Enter a cost center, an order, a project, or a cost object that is not statistical. The posting row affected is 000 and the account is 60700000."
On the sales order I have a statistical order.
CO-PA is active, cost element 607 is included in PA transfer structure.
I also tried with cost center allocation in OKB9.
60700000 is defined as a cost element (category 1).
Any suggestion could be helpfull.
Thanks,
Lavinia

Hi,
Thank for your answer.
I tested with element cost category 12, it's working, but not the way I need: I don't have any value on the cost center.
When I don't have statistical order in sales order, the sistem it's working exactly how I need: the costs are posted on cost center and the VPRS condition is transfered to CO-PA on profitability segment.
Anyway, I finaly make it work with a cost center substitution.
Lavinia

Error Message when Delivery Note is created

HI ALL,
          "Quantity falls into negative inventory" error message appears when Delivery Note is created from Sale Orders in SAP B1 system.
          Pls, solve my problem,
         Thanks u so much.
kyimoh
Best Regards

hi kyimoh
Please check Your Item In Stock Quantity status. If your quantity less then ur Delivery quantity. So You have to increase your item In Stock Quantity.
Thanks
Khan Imran

Error message when creating outbound delivery

Hi there:
When I am trying to create outbound delivery I encountered below error message:
Item 000010: delivery split because of different shipping points
How to solve this issue?

This mostly happens whenever the shipping point in the header and the line is not the same.
Or it may be the reason that the unloading and receiving points of the header does not correspond to the unloading and receiving point of line.
I hope it helps.
Regards:Vijay Kumar

QM Related Error at the time delivery

Dear All
After the sales order completion, i am getting this error message while doing delivery process.
1. Only 0 EA of material 12 available
2. Delivery quantity must be entered for the item
3. Error creating inspection lot for material 12
Before QM setup it is not occured but when i am assigning quality check in material master. I am getting these errors.

Hi,
The first message indicates that there are no sufficient quantities available for that materials. You can verify that using transaction code MMBE. Alternatively you can run the availability check in the sales order itself. If the quantity is available then the system confirms the quantity at sales order item schedule line level.
The second message is the result of the first one.
The third message shows that since QM is activated, the inspection lot created for this material needs to have usage decision entered for the inspection lot. I am not sure, this material uses batches or not. If it uses batch, then you can check the status of the inspection lot using transaction codes QA02 or QA03 or QA32. Discuss with your QM counterpart for the details. If no inspection lot is created, let them create and enter the usage decision on it (like entering unrestricted use).
Regards

Error Message V1810 - Make to Order No Change delivery plant in Sales Order

Hello, for a client where I'm setting the flow intercompany , but i have an error on the Sales Order when I must be change delivery plant.
Scenario: Make to Order, Product configuration, Sales Order BOM created by CS60
Step:
1 - I create sales order fo company X delivery plant 1000
2 - Creates Order BOM on plant 2000 Company Y
3 - creates MRP Planned Order
4 - Convert Planned Order to Production Order
For different issues can happen that you decide to ship the goods to a different plant than the X. Production Plant remains 2000.
If I try to change the plant on the Order system stops me with the following error:
Message V1810 - Plant can no longer be changed
Diagnosis
The plant can no longer be changed in the Following situations:
The item has been assigned to a project.
There is a production order for the order item but it is not a staticassembly order.
Already have accrued costs.
For the very complex structure of the product I can not delete the production order and sales order BOM.
How do I handle these cases?
Can anyone help me?
Best regards
Giuseppe

Hi Guiseppe,
can you please answer some questionsa to understand your requirement.
if you want to transfer the goods from plant to plant you can do it through Stcok transfer MB1B t code.
1.then why you want to change the plant? in which element you are trying to do in sales order or production order?
2.you mention it as intercompany and MTO can you be clear for whoom you got the sales order(internal or External Customer?

Error Message in Delivery : Quantity falls below minimum inventory level

Version : SBO 2005 A SP01 PL22
Description of Issue: When trying to Add a Delivery you get Error Message: Quantity falls below minimum inventory level [Delivery - Rows - Warehouse Code] [line: 0] [Message 131-14]. You are then unable to Post the Delivery and Print the corresponding Packing List.
Testing Findings: Upon detailed testing of this issue and work with SAP Support it has been determined that the issue is that the Delivery Row Ordered Qty is looking at the OITM In Stock Qty when determining if the full Row Qty can ship instead of the OITW In Stock Qty. This is an issue because due to other "bugs" this Client has encountered their OITW Qtys in other Whses are negative, even though they have the Block Negative Inventory and the Manage Inventory by Warehouse Flags Checked On. This then reduces the OITM Qty below the level of the Delivery Row and you get the above error message.
Example: A Sales Order Row has an Order Qty of 15 for Whse 01 for a particular Item. The OITW In Stock Qty for Whse 01 = 17. The OITW In Stock Qty for Whse 03 = -7. The Block Negative Inventory and Manage Inventory by Whse Flags are both Checked On. The 'Net' OITM In Stock = 10. When you try to Copy the Sales Order to a Delivery and Add the Delivery, you get the above Error Message and it will not allow you to Post the Delivery and Print the Packing List.
Current Workaround: Client is performing Inventory Goods Receipts to bring the In Stock Qtys in the affected Whses to greater than or equal to zero.
Proposed Solution: SAP Development to add logic to SAP Business One to validate the Delivery Row Qtys to Ship against the OITW In Stock Qtys instead of OITM when the Manage Inventory by Whse Flag is checked on.
Supporting Documentation: This DRQ Request relates to Support Message # 864405 2007. All above referenced testing details including example SO#'s, Item #'s, etc. and an entire copy of the Client's database are available and linked to this Message #.

Hi Ramu,
also you can make sure you are choosing the right WH in ctrlshiftS windows if You do, then chek on Inventory -> Inventory report -> inventory status if you have enought and available quantities for the delivery, if you dont then you gonna have to make the PO and the AP Invoice to add more quantity to that item
regards

How to add the error message into Delivery Error Log (VL10A,VL10X)

Hi,
I have a to add my custom message into Delivery creation error log (VBFS, VBSS)
This message should be shown in the Collective process log (VL10X, VL10A).
Please give me the soln to solve this problem.
I have searched in SDN, i didnt get the proper solution
Thanks
Shankar

HI,
Make use of the BADi "LE_SHP_DELIVERY_PROC"
Use the method DELIVERY_FINAL_CHECK.
Pass the error messages in table CT_FINCHDEL.
Regards,
Ankur Parab

Warning/Error Message delivery unit in sales order

Hello,
how is it possible to throw a warning or error message in the sales order, when the entered quantity is not a multiple of the delivery unit specified in material master sales tab 1?
Thanks
Anne

Hi,
Please take the help of your abaper and modify the user exit for sales order . Put a validation check at the time of entering the order quantity w . r .t delivery unit mentioned in the material master for that sales area and through a warning or error message as per your requirement.
For user exit please go through the below link:
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
Hope this will help you to resolve your issue.
Regards,
Krishna O

Error Message during posting return delivery against materil document

Dear experts
I have created a purchase order with batch specific unit of measure KAI.
I created the inbound delivery document (say for eg: 30,000 KG)
I have taken GRN for the above IBD through MIGO transaction with 101 movement for all 30,000 KG.
Later i have posted the return delivery 122 movement with reference to above 101 material document. 30,000 KG
After this i realized that i need cancel the 101 movement document.
So cancelled the 122 movement document, and try to cancell the 101 material document.
Then system is issuing error message VLA 321 "Movement type 102 cannot be used here".
Also if i again want to post return delivery to send the stock back, then also i have error message. but this time it is VLA 319
"Return delivery qty greater than previously GR-posted qty:"
My Support package for SAP_APPL, relese 600 is SAPKH60019.
Please suggest me solution to fix these errors as these are not relavant for the situation.
Regards/Murali

Hi,
Can you please check this note...
Note 1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
Note 1342935 - Error message BORGR 623 during GR reversal in MIGO
Regards
Bhuban

Error message while creating an inbound delivery to generate an idoc

hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leo

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Error message on Delay Delivery

Similar Messages

Maybe you are looking for