Error message on link

I created a link by highlighting some words and then used the
point to file tool. It works in FF but not in IE.
I also checked the link checker which came up empty. Thank
you for your time.

Post a link to the page. I'm not channeling well today.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Eliot Kango" <[email protected]> wrote in
message
news:ftdsm2$i9i$[email protected]..
>I created a link by highlighting some words and then used
the point to file
>tool. It works in FF but not in IE.
> I also checked the link checker which came up empty.
Thank you for your
> time.

Similar Messages

Error message with link to email

Hi,
I have a button on a site with a link to sending an email,
I'm using the following;
on (release) {
getURL("mailto:[email protected]");
I upload the file and test it online, and get the following
error message when clicking on that button:
RUNDLL
Error loading C:\PROGRA~1\Yahoo!\Common\ymmapi.dll
The specified module could not be found.
Is this a problem on my computer? or something is wrong with
what I'm doing?
Thank you,
D

is on your computer!
the problem is the Y! software...
anyway, try PHP and send the mail easier... ;)

Error message for links

I'm getting a error message every-time I click on a link in the body of mail.
"error
Mail was unable to open the URL “http://www.hacres.com/healthtipArticles2007/524_all.asp”. No associated application could be found."
Can anyone help?
Austin

Iput the quotation marks there.
This is one of the links.
Printable Version
Read Full Health Tip Online
Click on the link above to read all articles in the Health Tip on a single page.
1. Schedule of Upcoming Seminars and Events
2. Hallelujah Acres Ministry, update by Rev. Malkmus
3. From The Mailbag
Multiple Testimonies from around the world
4. Raw Vegetable Juices - The Key to Health and Healing
5. Recipes For Life: Holiday Crock-Pot Dressing *
For some reason all the links are now working in mail. I don't know why or how, but I'm glad. Thank you for taking time out of your schedule to respond. Well appreciated.
Austin

Archiving error message - order linked to old investiment program

During CO-Order object archiving, error message saying that order is linked to investment program. Check it is an 2001 old investment program. Tried, but could not settle balance/order. Is there any CO flag to allow access to 2001 investment program?
Thanks.

During CO-Order object archiving, error message saying that order is linked to investment program. Check it is an 2001 old investment program. Tried, but could not settle balance/order. Is there any CO flag to allow access to 2001 investment program?
Thanks.

False alarm error messages when Linking from e-mail to web

About 30-40% of the time that I try to link to the web from a URL embedded in an e-mail, an error message comes up saying that the program's unable to connect to that particular URL (which it cites). But then it almost always goes ahead and takes me to the right website. Why is this happening and is there a way I can stop it? It's a nuisance to always have to read the alarm and then needlessly worry that the connection to the website cannot be made. Thanks.

Hi,
you have something like:
end_of_data = ' '.
first_call = 'X'.
WHILE end_of_data = ' '.
        CALL FUNCTION 'RSDRI_INFOPROV_READ'
          EXPORTING i_infoprov             = ....
                     i_th_sfc               = ...
                     i_th_sfk               = ...
                     i_t_range              = ...
                     i_reference_date       = ...
                     i_save_in_table        = ....
                     i_save_in_file         = ....
                     I_USE_DB_AGGREGATION   = ...
                     i_packagesize          = 100000
                     i_authority_check      = ...
          IMPORTING e_t_data               = .....
                     e_end_of_data          = end_of_data
          CHANGING   c_first_call           = first_call
          EXCEPTIONS illegal_input          = 1
                     illegal_input_sfc      = 2
                     illegal_input_sfk      = 3
                     illegal_input_range    = 4
                     illegal_input_tablesel = 5
                     no_authorization       = 6
                     ncum_not_supported     = 7
                     illegal_download       = 8
                     illegal_tablename      = 9
                     OTHERS                 = 11.
ENDWHILE.
hope this helps...
Olivier.

Error message without link to field

I have a page where I am entering some information and saving it. I am using a VO which is based on an EO. I have two instance of this VO. One is being populated from the page and other one is being populated in the background.
I have put some validation in EO and using following code in validateEntity()
    if (getTotEngHrs() == null)
        throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
                                  getEntityDef().getFullName(),
                                  null,
                                  "TotEngHrs",
                                  getTotEngHrs(),
                                  "CRM",
                                  "CINT_CRM_TOT_ENG_HRS_NULL");
When I try to save data without entering any value in TotEngHrs field. I do get the error but without any link to this field (just get the plain message). I then enter value in some other field and save it again and I start getting the error with link to those field.
Is there anyone who can help me in this?
Thanks in advance

Just in case it's not clear from above.
If I don't enter value for TotEngHrs I get error as I should be but without link to the field ..when I hit save second time the link to error field does appear.

Trying to export from FCP 10.0.9 to YouTube, I get error message: no linked youtube account. It worked until yesterday, then stopped working. I tried changing passwords and accounts, but no help.

This is the story. Up until two days ago, when I completed a video project in Final Cut Pro 10.0.9, I went to file->share->YouTube and a window opened up that showed the name of my YouTube account - (e.g., account.name) which is the same as the name of my gmail account. I then clicked 'next' and was asked for the password for that account. Upon supplying that and clicking next/publish, the uploading began.
Then suddenly, this procedure no longer worked. When I supplied the password, I got a message saying:
'NoLinkedYouTubeAccount'. Following online advice, I changed my account name from account.name to [email protected] and supplied the password. Still no good. I then changed the password in that account and tried both ways again. Still no good. I then opened up a new gmail account with a new password and tried that both ways. Still no good. I've tried following other online advice but nothing works. When I go to youTube, I see both accounts listed so they are there but the link doesn't get made. I've tried uploading several different videos, but it makes no difference. The videos I've uploaded previously to YouTube are there and functioning OK.
Help would be much appreciated!
- David

When I asked about codecs I was thinking of conflicts that FCP might have with one that would have been installed from a third party vendor…
It would seem to be something at the system level since all the user-specific fixes appear to have had no effect. And you've already tried a comprehensive list of the suggestions that I would have thought of…and probably more.
You didn't mention available disk space but I assume you checked that as well and you have at least 15% free on your start-up and media drives.
Has any version of FCPX performed for you as expected in the past?
When you uninstalled the app, by any chance did you use FCS Remover? If you didn't, give it a try.
Russ

Error message linking to field

Hi guys,
I'm trying to generate an error message that links to the field when clicked on.
My problem is this. This error message is for a dropdown list. When user choose a blank selection, it will generate the error message to "fill in the mandatory field", with the link to the dropdown box.
I tried lo_message_manager->report_attribute_error_message but it gives an error dump for null values (due to blank selection).
I have also tried cl_wd_dynamic_tool=>check_mandatory_attr_on_view. This works fine for the other inputfields, but it doesn't work for the dropdown list.
Please advise. Thank you very much.

Hi,
how is your dropdown done? by key/index?
because with an indexed one, none is selected, thus returning a dump when you try to have
an attribute error message (initial selected element).
Greetz,
Koen

"Network Magic Notification: NMApp.exe - No Disk" error message

Since downloading a trial of Network Magic I get an error message when linking to websites from email.
How do I fix this.

Hi there, can you please post some addtional info so that the Cisco Network Magic Support Community here on the Linksys Forums can assist you? The info that is needed is as follows:
1. Your Network Magic Version installed: example: 5.1.8345.0
2. The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection.
3. The Brand of Modem and its Model Number the router is connected to.
4. The Brand, Model, Hardware Revision of your Router and include the Firmware Version: Linksys WRT54G v8.2 Firmware Version 8.2.05
5. The Method of connection your problem computer has to the Router: Wired or Wireless.
6. The Connection in use on the problem computer: Ethernet Port is a PCI Adapter Card, Linksys WMP54G v4.1
7. Operating system and version and Service Pack Level, if any. Ex. Windows XP Professional x64 Edition Service Pack 1
8. Software Firewall in use: McAfee Personal Firewall 9.0.136 Build
9. Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. (Some Programs like Spybot does cause problems, not being able to go to specific sites.)
10. Include your location in the post or fill out your Profile for this forum and include the location. (Reason: Not all Routers from a given manufacturer are available everywhere.)
11. Post the link to your Router Model, if an off-brand Router or not found in the USA on the Manufacturer's USA's Website. (Why? Posters helping each other, aren't working for Linksys or Cisco, so make it easier on the posters helping on.)
12. And any other information you think is important if answering your own post, and the nature of the problem, itself.
13. By posting all this information, you can hopefully get help from someone that has the same equipment that you have and theirs is working. Not everyone has the same equipment.
(Thanks to thecreator for providing me this list of info needed for NM support)
Please note that I am note that I'm not an employee of Cisco, and I am volunteering my time on here to assist other NM users, thanks!
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

Error message in Print work bench

Hi All,
We got two clients in development server 100 and 101.
Client 100 (There is not data available)
Client 101 (Data is available)
Test server, client is 101.
Production server, client is 101.
When I click on display button(EFRM Trrancation code in production server) . The following error message is displayed.
Error message.
"Link /pes/j_installment_letter in client 101 contains errors; target in 102 does not exist."
The problem in both the server(Testing and Production server).
Help required very urgent.
Thanks in advance.
Regards,
Srinivas
[email protected]

Hi Anand,
This should have been a seperate post, i could have got some points
here is an extract on how to do
http://help.sap.com/saphelp_nw04/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm
Configuring CCMS Alerts for the Adapter Engine
If processing of a message on the Adapter Engine fails, the message state is changed to faulty. To notify administrators immediately of such processing failures, they can be propagated as alerts to CCMS. As CCMS is the SAP standard interface to third-party monitoring tools, these failure events may also become visible in non-SAP monitoring tools.
Configuration Steps
To make use of Adapter Engine alerts, you must configure the connection to CCMS as follows:
1. Make sure that the J2EE engine on which the Adapter Engine is running is configured to be monitored by the central CCMS system.
To do so, execute transaction RZ20 on your central monitor server. There, the J2EE engine should be visible in the CCMS monitor under SAP J2EE Monitor Templates ® All Systems. If not, follow the steps described in the Supportability Setup Guide for SAP NetWeaver 04 on SAP Service Marketplace at service.sap.com/nw04operation ® Cross-NW.
2. Check whether the Adapter Engine is configured to report errors to CCMS.
To do so, start the Visual Administrator and select service SAP XI AF Core. The value of property CCMSEnabled must be set to true (in lower case letters). If it is not, change the property value to true and restart the service.
To verify that the setting is effective, select the Visual Administrator Monitoring service. Under Root ® Applications, you should see a node for the Adapter Engine.
cheers,
Naveen

79 Service Error Message on the LaserJet Pro 200 color M251 Series printer

I've been using this printer with the Mac OSX 10.9.4 OS for about 9 months.
I'm now getting a 79 Service Error message. I've tried to turn the printer Off and On several times to no avail.
Strangely enough, when I try to print a new document, a message keeps appearing on my computer, that says "The printer has been paused. Do you want to resume printing?" When I click the Resume button, nothing prints out.
The user manual says that the 79 Service error message is linked to a firmware problem? Do you know how I can fix this issue?
Many thanks,
Pierre
This question was solved.
View Solution.

Hi NebraskaPierre,
I see by your post that you are getting a Service 79 error on the printer. I can help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
This can be caused by malformed PostScript documents.
Please do the following:
Locate the on/off switch on the bottom of the printer.
Switch the printer off position and COUNT to 10.
Turn the printer on again and the system should be all set.
Try printing from another application to see if you have the same issue.
If a print job of yours repeatedly causes this error, it may indicate a problem with the print job.
Try breaking your document up smaller before printing it.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon ( ), and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign, then select the printer from the list and click on the Add button.
(make sure it shows the printer name beside Use, not the Airprint driver)
Try printing again.
I would recommend to run a firmware update on the printer if the issue continues.
There are none on the website for the 10.9, but you can run the updates right from the printer.
Go to setup, services, Laserjet Update, Check for Updates now.
What are you trying to print and from what application are you using? (PDF)
Please provide in detail the results if you are still having issues.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Error message: Banking - Incoming Payments - Incoming Payments

Hi, Experts,
When I was trying to post a deposit (for an A/R Invoice) to the bank account. I click 'Banking - Incoming Payments - Incoming Payments'. But there is a error message saying 'Linking primary sales accounts has not been completed'.
How to fix this problems? Thanks!
Lorrie

Hi,
Check Note No. 871509 if the same applies to your case.
Request you to kindly check the following :
1. First define revenue account under administration->setup- >financial   ->G/L account determination -> sales tab and check whether the issue was solved or not.
2. if the error still exists after step 1, you have to define all the
   other accounts that you have not defined previously. Then your
   issue might be resolved.
Even if there are no bookings to go on a primary sales or purchase account, an account must be defined for SBO to work. Ideally, ALL sales, purchase and tax accounts should be defined. Once the account code is entered, the error message disappears and SBO works normally.
Other possibility is that one of your primary accounts is defined
as "confidential". (sales/purchase/Cash etc..)
Hope it helps.
Regards,
Jitin

Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.

Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

How can I stop from getting the "Firefox is already running" error message when trying to open links and FF has already been opened through a symbolic link?

I use symbolic links and program shortcuts as a way to easily open different Firefox profiles ie. one for casual/personal use and another for work. This works well, but I get the "Firefox is already running, but is not responding" error message if I try to open external links with FF as my default browser. FF is actually open and running fine, but I guess it doesn't acknowledge this fact because of how I'm originally starting the process.
I wasn't able to add the symbolically linked executables to the default program pane. Is there a way to bypass this error or other way to fix this?
The solution to the question linked below is what I'm using to open the different FF profiles.
http://superuser.com/questions/255312/pin-same-app-multiple-times-in-windows-7

hello, this is probably happening when you run the default profile with the -no-remote switch.
http://kb.mozillazine.org/Profile_in_use

FF 6.0 doesn't open pdf-links, after clicking on "open pdf" error message says file not supported or damaged. IE opens file all right. Please advice.

Firefox 6.0 doesn't open pdf-links after clicking on "open pdf". I frequently need to do literature searches and I need to view pdf files in the browser. After clicking on the pdf - link of a file the main options are to open or download the pdf. Every time I try to open a pdf-file a blank page and an error message appears saying the file would not be supported or is damaged. IE, however, opens the file all right. I tried various changes in the security and cookie settings without success. Please advice.

Hi SGckc,
This document is almost certainly a dynamic XFA form. Unfortunately, our mobile Reader does not support displaying or filling such forms. The application that produces this form embeds this message into the document so that non-supportive viewers (like ours) will display this "error" page when the document opens. I do realize that this is confusing and I would like to add some additional detection to our Reader for this case. However, we've avoided doing this for fear of confusing users even further. Your feedback helps though. Hopefully we'll find a way to detect this case and present a better message to the user like: This form is not supported by the mobile version of the Adobe Reader. Please open and fill it on the non-mobile version of the Adobe Reader for Windows, Linux or Mac OSX.
Thank you for contacting us!
Pat

Error message on link

Similar Messages

Maybe you are looking for