Error message that I'm missing iTunes.msi.

I'm trying to download the new version of iTunes and I get the error message that I'm missing iTunes.msi. I can't uninstall the old version of iTunes; I can't install the new version. I've searched the computer for the file and it's not there.

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Similar Messages

After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong?

After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong? I've installed it and uninstalled it several times already, but each time I get that error message...

I've been getting timed out for 2 days now, what finally worked for me was not plugging the phone into the computer and just doing the update through my wifi, worked perfectly, took less than 15 minutes

TS1702 Trying to download free solitaire application and error message that cannot connect to itunes store

Please contact me ASAP - having an issue on iphone 4 - app store trying to download a free solitaire application and it give an error message that cannot connect to itunes store
[email protected]
817-999-1812 Joe or Jeana Jones

Hello, perhaps this may help: http://blogs.isaserver.org/shinder/2006/03/05/explanation-on-the-502-error-to-de lta-and-sun-sites/ the comments have some specific references to iTunes.
The issue is that it's almost certainly a problem with your firewall/proxy and not iTunes so you might be hard-pressed to find help here as suggesting help for private LAN infrastructure is not the same as suggesting help for iTunes. Usually I'd suggest turning the proxy off and work your way backwards to find out where the problem is but I guess this isn't possible.
Anyway, have a look at the link and see if it helps.

TS3212 can't download new iTunes version; old version blocks it; error message "network resource is unavailable" iTunes.msi

Can't download latest iTune version on my PC with Vista 64bit. Old version blocks it. Error message: "......network resource that is unavailable" references "iTunes.msi" How do I remove old version?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am getting a runtime error message that won't allow itunes to open when I plug in my ipod. Any suggestions?? I already rebooted my computer. It worked fine yesterday.

I am getting a run time error message that I've never seen before, it won't allow me to connect my ipod touch with windows. It says: An application has made an attempt to load the C runtime library incorrectly.
I have no idea what this means but it was working fine yesterday when I connected it.
I have rebooted my computer and nothing has been fixed.

Did you do this:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Whenever I turn on my Apple TV, it get an error message that says Go to itunes store on your computer and get your password.

Whenever I turn on my Apple TV, it get an error message that says "Have you forgot your password. You have attempted to log in too many times. Go to itunes store on your computer and get your password". I have logged into itunes store on my computer, but I don't know what to do next. I accessed my account on itunes store hoping that would give me a pasword or other useful information, but no help. What am I supposed to do?

I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

I'm trying to open itunes and keep getting an error message that i'm missing a file, MSVCR80.dll. How do I fix this? I've tried uninstalling and re-installing itunes several times.

I am trying to open itunes on my computer. Windows 7 64-bit operating system. When I try to open itunes, I get an error message saying MSVCR80.dll file is missing. Where can I find this file and how can I get it on my computer? I have tried uninstalling and reinstalling itunes several times. Thanks for any help.

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

I cannot get i-tunes anymore. I tried the i-download. Still no help. I get an error message that reads The file "itunes Library itl" cannot be read because it was created by a newer version of iTunes. What can I do? tunes down load

I cannot get i-tunes. I tried the download, but no help. I get an error message The file "iTunes library itl" cannot be read because it was created by a newer version of iTunes. Any suggestions?

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

Error message that burner drivers missing

problem with ITunes update on PC, uninstalled/reinstalled, now error mess that burner drivers are missing, please reinstall. ???

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

I get an error message that it is missing or in acessible

I have windows 7 , I down loaded firefox and it worked for the first sesson , but now I get this error message .

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

When installing cs6 on pc it is flashing a error message that file is missing try to install adobe support advisor pls help me

pls help me for this issue

You are not addressing Adobe here in the user forums.
BOILERPLATE TEXT:
Note that because this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I can't order my book in iPhoto. It keeps giving me an error message that I'm missing a photo that I can see plain as day.

I pushed the "Buy Book" button, and it said that I cannot order the book because I have a blank photo spot. I clicked okay. It took me to where it thought the blank photo was and "pointed" to it with a thing that looked like a speech bubble. The "bubble" said to insert a photo there, but there was already a photo there. I tried removing it and reinserting it. I tried moving the page around. Nothing works. I can't submit this book, and it's done. Any suggestions?
Thanks!

generally this is caused by having a page layout for full page photo with a single full page photo in front of it -
This FAQ describes how to find and fix it
LN

I am trying to install itunes 10.5 but I get an error message that says click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi...I try to point iTunes to the .msi file but that is not working.

i am trying to install itunes 10.5 but I get an error message that says "click ok to try again or enter an alternate path to a folder containing the installation package iTunes.msi..." I try to point iTunes to the .msi file on my c drive but then it gives me a message says "the file location is not a valid installation packaage for the product iTuness. Try to find the installation package 'itunes.msi' in a folder from which you can install iTunes". Any help, insight, guidance would be greatly appreciated!!

"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HT201210 Itunes will no longer open with the error message MSVCR80.dII is missing from the computer, and I'm advised to reinstall itunes but that hasn't worked. What else can I try?

Itunes will no longer open with the error message MSVCR80.dII is missing from the computer, and I'm advised to reinstall itunes but that hasn't worked. What else can I try?
Thanks for your help
Pippa

Click here and follow the instructions.
(98708)

HT1923 I can't uninstall or update iTunes. I get an error message that it can't find the file itunes64.msi.

I can't uninstall or update iTunes. I get an error message that it can't find the file itunes64.msi. where is it suppose to be?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error message that I'm missing iTunes.msi.

Similar Messages

Maybe you are looking for