Error message when setting up a printer

I just received my new airport extreme (way cool). I can access the internet on both my MacBook Pro and Intel based iMac. However, when I try to add my HP Deskjet 3940 on both machines I get an error message: "an error occurred while trying to add the selected printer. error: - 9672"
I can see the printer in the printer set-up utility and it says it is connecting through bonjour.
What am I missing and why can't I print?

I checked this list. I checked it twice. No HP 3940. However, my printer is listed in the printer list - "Once your printer is connected to the base station, check to see that the printer is listed in the printer list in the Print Center (Applications/Utilities/Print Center)." When I click add I get the dreaded error message.
What's up with that?
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)

Similar Messages

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

Error message when I try to print: unsupported document-format"application/vnd.cups-command. I recently had my hard drive replaced in my early 2010 21" iMac. Can anyone help?

Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in my early 2010 21" iMac. Anyone know anything about this? Thanks in advance.

What system are you running? Have you tried going to the Canon website to download and install the latest drivers for that model?
Are you running Time Machine?

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

OK, I tried a few things, and I do not understand the results.
1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
My conclusion is that my file must be corrupted. Is there any way to check this? shabda88

Error message when setting up Road Runner Email on my new Macbook Pro

I get the following error message when setting up my RR account.
Logging in to the neo.rr.com POP server “pop-server.neo.rr.com” failed. Make sure the user name and password you entered are correct, then click Continue. If the information isn’t correct, you cannot receive messages.
I go to the next steps and everything looks like it should.
Help

Hello Jen,
Congratulations on your new MacBook Pro! I understand how important is to have your email account setup on your new computer. I found a couple of resources that I think might help.
You can check the Mail Setup Assistant for the server settings for common email providers. I recommend checking your email settings here first to verify they match what you have in the Mail application:
Mail Setup Assistant
https://www.apple.com/support/macosx/mailassistant/
If the Mail Setup Assistant does not provide settings for your email account, you can use the following article when contacting your email service provider to gather the necessary information to setup your account:
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
If you are able to setup your account but messages are not being downloaded, I recommend reviewing the following article:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

Keep getting error message when sending data to printer

i keep getting an error message when trying to print. window says "sending data to printer" but nothing happens and i get an error message.
anyone else experience this and how did you solve the problem?

Hi psknv3,
Welcome to Apple Support Communities.
What error message are you seeing when the printing issue occurs? The article linked below provides a lot of great information and general troubleshooting suggestions that may resolve the issue.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
I hope this helps.
-Jason

Error Message when I turn on printer after installing 10.4.10

I installed the 10.4.10 upgrade, and ever since then when I switch on my Brother DCP 115 printer, I get a message that the connection to the machine has failed, that I should check the cables, switch it off and on an try again. In the upper left corner is a picture of a camera...
But there is no connection failure, the machine works fine. But I'm stuck with this error message that won't disappear unless I reboot the Mac.
I tried everything already. Setting up a new connection, reinstalling the drivers and software, repairing permissions, nothing works.
Strange phenomenon: after a reboot, everything works fine. After my Mac has been switched of for a couple of hours, the problem returns.
Mac support in Holland doesn't know of anything. They suggested to archive and repair, promised to mail me a how-to article, which never arrived, and I don't have a clue.
Any ideas, anyone???

I installed the 10.4.10 upgrade, and ever since then
when I switch on my Brother DCP 115 printer, I get a
message that the connection to the machine has
failed, that I should check the cables, switch it off
and on an try again. In the upper left corner is a
picture of a camera...
But there is no connection failure, the machine works
fine. But I'm stuck with this error message that
won't disappear unless I reboot the Mac.
I tried everything already. Setting up a new
connection, reinstalling the drivers and software,
repairing permissions, nothing works.
Strange phenomenon: after a reboot, everything works
fine. After my Mac has been switched of for a couple
of hours, the problem returns.
Mac support in Holland doesn't know of anything. They
suggested to archive and repair, promised to mail me
a how-to article, which never arrived, and I don't
have a clue.
Any ideas, anyone???
I have the identical problem except my printer is a Brother MFC440CN, so the problem is not printer model specific, perhaps not even unique to Brother.
The really annoying thing is that I cannot get rid of the message without using Restart or Shutdown. The OK button doesn't close it. The error message is [MTW005]
I think Apple needs to get on this and other issues associated with 10.4.10.
BNC

Getting error message when setting up CNAME & MX record. Help?

When setting up a CNAME and MX for a 2nd site with a different email on that site, I am getting error message, "URL aready in system". Bothe 1st site and 2nd site have different emails but are both on same server. How can I fix this?

LadySiren, hmm that's odd. Are we setting these trusted numbers up on My Verizon from the computer? Are we putting the full 10-digit mobile or landline numbers in the slots? How many numbers do you have saved in total for trusted numbers? Let me know if it is working out or if you have any other issues. I want to make sure we get this going for you ASAP.
KevinR_VZW
Follow us on Twitter @VZWSupport

Error message when setting a ringtone

Hi, all
I've downoaded a song from itunes store. Now it's in the "purchased" category.
When I click on "create ring tone" I get this message: "could not connect to the itunes store. An unknown error occured (11556).
Can someone help?
Thanx

I checked this list. I checked it twice. No HP 3940. However, my printer is listed in the printer list - "Once your printer is connected to the base station, check to see that the printer is listed in the printer list in the Print Center (Applications/Utilities/Print Center)." When I click add I get the dreaded error message.
What's up with that?
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)
iMac Intel Duo, MacBook Pro Mac OS X (10.4.9)

Error message when setting up Captive Portal in WAP561

Hi,
I tried to set up redirect URL in Captive Porter and got the following error message. Please advise steps to take. Thanks.
The following error(s) have occurred...
error occured for query on path send.device.sync (function: data_service, file: /projects/ccstgloc-fstpth4/viewstore/lvl7build/build/ec12298203_RELEASE_CUST_CISCO_OAKMONT2_MAIN_1.0.3.4-dni3420smp/vobs/ap/broadcom/src/web-ui-framework/data_service.c, line: 481)
lsql error: Value "http://www.ren-est.com/" is not valid for property "redirect-url" of class "cp-instance"., code 1, counter: 0 (function: debug_lsql_check_error, file: /projects/ccstgloc-fstpth4/viewstore/lvl7build/build/ec12298203_RELEASE_CUST_CISCO_OAKMONT2_MAIN_1.0.3.4-dni3420smp/vobs/ap/broadcom/src/web-ui-services/apconf_query.c, line: 1008)

My name Eric Moyers. I am an Engineer in the Small Business Support Center.
I am sorry to hear that you are experiencing this issue.
What is the complete path that you are trying to re-direct clients to?
I just set this up in my lab and using http://www.ren-est.com I was able to get this to work and re-direct me.
I do know that if you try to re-direct to something like http://www.ren-est.com/freshstart.html, it will not work, if that is the case you may need to call in an open a feature request to have that ability added.
http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
Eric Moyers
.:|:.:|:. CISCO | Cisco Technical Support | Wireless and Surveillance Subject Matter Expert
Please rate helpful Posts and Let others know when your Question has been answered.

Error message when setting up secure network

Trying to set up secure network when I get to step check HTTPS I get kicked out and get error message 192.168.1.1 is not set up to establish a connection on port HTTPS with this computer.

marjie3333 wrote:
Trying to set up secure network when I get to step check HTTPS I get kicked out and get error message 192.168.1.1 is not set up to establish a connection on port HTTPS with this computer.
Try another browser. If it is not going to work, use another computer. By the way, what is the model number of your router?

Error message when i turn on printer

I have a HP Photosmart C7280-CC564A All in one printer and when I turn it on I get blue screen on printer with B24C1700 on it and
you cannot go any further. It will not clear out message. Also on front of printer the blue flourescent light on what looks like a camera is flashing. Nothing is in the card readers next to it.

HI,
You might try resetting the printer. The document linked hear isn't your exact error message, but it contains the reset instructions that might clear this up for you. Try the steps especially about removing the cartridges and power cord.
Reset
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Photosmart Plus B210 - Error Message when attempting to add printer

When attempting to add our Photosmart Plus B210 on a computer with Windows 7, we get the error message: "Active Directory Domain Service is currently unavailable". We have installed the drivers from the disc and have attempted both USB and Wireless installation--neither have been successful. We have uninstalled and reinstalled mulltiple times as well as followed another forum suggestion to run msconfig and change startup to diagnostic, etc. HP Print & Scan doctor has not helped resolve. Any ideas out there?

Hello felenti,
Please let me take a moment to say "Welcome" to the HP Forums. I hope you enjoy your experience!
To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some issue with the installation of your printer to your computer. I also see that you have ran the HP Print and Scan Doctor and it did not resolve the issue.
One step that I do suggest we try is to run the HP Printer Install Wizard for Windows.
Please write me back with the results of the Wizard.
If I don't hear back from you today, I hope you have a Great Wednesday.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

WebDAV Error message when setting Properties

Hi
I have set up Oracle Drive to allow content to be uploaded to the Portal pages. This appears to be working fine however, when I right-click on a file to set properties I only see an Advanced Properties and not Set Properties as shown in the documentation. Clicking on Advanced Properties produces the following error message
"Advanced Properties is not supported by this server"
Can anyone help me resolve this issue please ? Is the Advanced Properties the same as Set Properties as stated by Oracle's documentation ? Is this a version issue ?
Thanks
Kevin

Hi
Well after further analysis I have been able to set the properties for the item by clicking on 'Properties'. However I am also seeing an 'Advanced Properties' item which produces the described message when I click on it. Can anyone explain what functionality is provided by this?
Regards,
Kevin

Error message when setting up a printer

Similar Messages

Maybe you are looking for