Error  message when trying to add new user

Hello,
Customer is working on 2005B (2005B 7.40.252 SP00 PL39).
They are working on this database since 2009.
No upgrade was recently done.
when trying to add a new user they get athe following error:
"A user was added outsite the application. Delet it, or preform'Restore Numbering' [Message 3512-7]"
Could you please advice.
Regards,
Maya

Hi Maya......
Go to Administration--> Utility and select the restore no. series.
Update this and try to add User.
But do it first in your test DB.....
Regards,
Rahul

Similar Messages

  • I get error message when trying to add key tags

    I get error message when trying to add key tags

    You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
    You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

  • I continue to get an error message when trying to add Header

    I continue to get an error message when trying to add Header & Footer.  Therefore I am unable to add page numbers to my pdf.  Help!!

    Sounds like the PDF has an issue. You can try to save it, close, and reopen to see if that fixes it. If there are no tags or other markup, you could print it to a new PDF and try on the new file.

  • Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

    Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.  How can I fix this?
    Thanks
    [email protected]

    What is your operating system?  Reader version?

  • Bizarre error message when trying to add BT Vision...

    I am getting a bizarre message when trying to add BT Vision to my BT Infinity broadband which is due to install on Thursday.  I'm hoping it is only due to the fact the order has not completed and will be fine in a week.  I did speak to an "advisor" but I helpfully was told the line cannot be checked until the current order is complete and I'd obviously want to know if there will be any problem with me getting BT Vision prior to that!
    Has anyone else seen this error message and have any advice?  Note that I am definitely not in any trial and the 0800 number is now dead.

    Hi Evil_Dan,
    Welcome to the forum.
    If you can email in your details we'll check this, you can get our "Contact Us" link by clicking on my profile page.
    Thanks,
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Error message when trying to add a printer  -50?

    I'm using an HP LaserJet 2100M, connected to my iMac G5 with a JetDirect 610 networking card through the ethernet port.
    Usually it works, but now when I've tried to reset the printing preferences (often necessary to get it to work) and go to choose a printer, I get an error message: "An error occurred while trying to add the selected printer.....error -50."
    I've tried restarting, and using the disk utility, but it says nothing needs to be repaired. Anybody have any suggestions? Do I have to reinstall, or will any updates help? I'm using 10.4.3
    thanks

    Use the process outlined here:
    HP Printers (and others) not on compatibility list and Airport Extreme Printing
    http://tech.ifelix.net/1300.html
    Using the Gimp-Print drivers for the HP PhotoSmart P1000 printer.
    The supplied HP C3180 drivers will not work when the printer is connected to an Airport base station.
    iFelix

  • Error message when trying to add printer

    First my DeskJet 1125c wouldn't print then I got my fathers old deskjet 845c which worked for a few days. Now that doesn't work either and when I try to add a printer, I get an alert box with this message:
    "An error occurred while trying to add the selected printers.
    "server-error-service-unavailable."
    So now I can't print from any of my two HP printers, DeskJet 845c or Deskjet 1125c.
    Please advice
    Best regds
    PB G4   Mac OS X (10.4.9)  

    http://docs.info.apple.com/article.html?artnum=107054
    You could use Printer Setup Repair from www.fixamac.net to help fix that, too.

  • Error message when trying to add transition or won't render anything!

    I had been very successful in building a movie with video clips and still photos, and all was going along well until all of a sudden, I cannot add any more transitions! I keep getting an error message that states: "An unknown error occurred. You may be able to continue without any problems. You may also wish to save, quit, and re-launch IMovie HD."
    Occasionally, it will let me add the transition, but then it just sits there for hours and will not render. I'm up to a 1 1/2 hour movie, which has taken nearly two weeks to build (I'm very new at this!) and would hate to start over!! I did try making a new movie, and the transitions ran just fine!
    I have restarted umpteen times, even reinstalled IMovie HD. I'm running system 10.4.6 with an 80G harddrive, but have the movie saved on an external harddrive because it wouldn't fit on the other one. (It's at 22 G now!!)
    Any suggestions??

    I spoke too soon. I began a new movie and imported
    photo clips, which rendered just fine. However, I
    can drag transitions in between the photos, but they
    simply will not render. Everything was just swell
    until yesterday afternoon when I changed the length
    of the clips so that there would be enough room for
    the transition. I tried to do multiple clips at the
    same time, but they never rendered. It was then when
    I was unable to add any more transitions.
    Aha! That may be different problem. There's a bug in iMovie that makes it impossible to update image clips after you empty the iMovie trash. If you imported the image with the Ken Burns checkbox ON, the bug can affect you later.
    It's possible, I suppose, that this bug not only prevented you from updating the clips to a new duration, but made it impossible to add the transition to the clips.
    After importing your images with the Ken Burns checkbox on, you might try dragging the source image out of the iMovie trash, described here:
    http://discussions.apple.com/thread.jspa?messageID=2139814&#2139814
    Karl

  • Error message when trying to add item in change BOM goup

    Hi I went to transaction cs05,and trying to add item to specific material with BOM group,an error message popped up and saying assign the item to an alternative,what does it mean? How to solve?

    Hi,
    A finished material can have multiple alternative BOMS which can be stored in a common BOM group number. CS05 is used to change these multiple boms.
    When you add a new item in CS05, system will ask - to which alternative bom the new item should be assigned and that's how you are getting this message. For example, if in a bom group you have 3 differnet alternatvie boms for a FG material, when you add new item in CS05, you will see 3 checkbox at the right hand side of the screen. If you want to assign new item to all the three alternative BOMs , than select all the three check box and save.
    Regards,
    Ravi Thakkar.

  • Getting error message when trying to add apple id to facetime and imessage, getting error message when trying to add apple id to facetime and imessage

    When I try to add my Apple ID to Facetime or iMessage, I get an error message "username or password is incorrect " even though its the same username and password I use for everything else.
    anyone else getting this problem?

    The Order has got 5 lines. First 4 lines are product lines and the 5th line is a service.
    We have a customized form called mass order change which will bring only the product lines when we query a order. We usually do the mass update of shceduling date
    and promise date in that form for all the order lines or for some perticular lines in that order.
    For one order when i tried to update the scheduling date and promise date its showing this message. Not sure why??.. i have checked the form logic and the package which this form is using but all of them are calling the standard API process_order to change the sales order. I found out that This message is a standard Oracle message : OE_SCH_OVER_ATP_NO_SCH_ACT. I tried to find this message in process_order API but could'nt find this message. status of these 4 lines are : Awaiting Shipping
    Thanks and Regards,
    Ragni Gupta
    Edited by: 921176 on Jan 21, 2013 5:17 AM

  • Error message when trying to create a user account in WGM

    In WGM, everytime I try to create a new account and save, this message appears:
    *Got unexpected error*
    +Error of type eDSAuthNoAuthServerFound (-14102)+
    +on line 2112 of /SourceCache/WorkgroupManager/+
    WorkgroupManager-319.2.2/Plugins/UserAccounts/
    UserAdvancedPluginView.mm
    What is that?
    I tried to create the user accounts in Server Preferences/users but I can not login.
    It seems that I get a lot trouble with leopard server. Should I reinstall it or go back Tiger?
    Thanks

    How come Leopard let me use the WGM in standard mode?
    While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
    If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
    If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
    So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
    Yes.

  • Getting an error message when trying to add book to iPod?

    Almost every time I try to add a book to my iPod touch from my computer, I get an error message that says "Attempting to copy to disk failed.  A duplicate file name was specified."  And then another pop up comes up that says "Itunes could not copy because an unknown error occured (-48)." 
    This has only started happening since I updated iTunes on my computer about 2 weeks ago and it happens 4/5 books that I try to add.  As soon as I drag the book onto my iPod on the left of the screen, it comes up.  Any ideas on why this is and how I can fix it?

    See this previous discussion.
    https://discussions.apple.com/thread/1634860

  • Wss3 -- get XML "gibberish" when trying to add new user to site

    Site Actions > Site Settings > People and groups > New
    Select "book" icon  under Users\Groups, add domain user (works fine). This is displayed in the "Users\Groups" box in Add Users. The text displayed in  "Users/Groups"  looks like this:
    <span tabindex="-1" title="Domain\User" class="ms-entity-resolved" id="spanDomain\User" contenteditable="false"><div id="divEntityData" style="display: none;
    Pressing "OK" returns "No exact match was found". Help!
    TIA,
    edm2

    hi edm2,
    i think you may need to open a new thread at IE forum also, perhaps there will be more detailed clue.
    http://social.technet.microsoft.com/Forums/ie/en-US/home
    meanwhile please work through these steps.
    1. From Internet Options> General > Browsing History> Delete (next screen) uncheck Preserve Favorites website data then check and delete Temporary Internet Files.
    2. Go to Internet Options> Security> Internet Zone, set it to Default.
    3. Check any third-party security programs to see if one of them is blocking scripts, scripting, active content. A number of security programs can be configured to block scripts.
    4. Try these two commands from Start> Run> cmd [enter]
    regsvr32 vbscript.dll    [enter]
    regsvr32 jscript.dll       [enter]
    5. See if a browser add-on is causing the problem.
    Start Internet Explorer without add-ons by right-clicking the IE icon on the desktop. Choose Start without add-ons.
    or
    from Start> Programs> Accessories> System tools> Internet Explorer (no add-ons)
    If the problem goes away, an add-on is causing it. 
    http://blogs.msdn.com/b/ie/archive/2006/07/25/678113.aspx
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Canon HF G10 Camcorder - "Cannot Record" error message when trying to make new recordings

    Hi All, 
    I purchased Canon HF G10 camcorder 6 months ago and suddenly I am getting a "Cannot Record" error message each time I press the record button - it simply stopped working and I am puzzled about this - has anyone else faced this problem? if yes, were you able to resolve it? Any insights or torubleshooting guidance will be greatly appreciated. 
    Best regards,
    Rajiv Arora. 

    ra33,
    I am very glad to help you with this. 
    According to the specifications in the user manual, this model records to the internal memory by default in any shooting mode.  You can manually select to record to the SD cards, but only in the Manual or Cinema modes.  If you are shooting in Auto, clearing out some of the internal memory should stop the "Cannot Record" message from appearing.
    If there is anything else I can help you with, please let me know.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Error When trying to add new user field to OCHH table

    Hi
    can you please check the following code ? I am geting an error "Ref count for this object is higher than 0"
    Dim RetVal, ErrCode As Integer
            Dim ErrMsg As String
            Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
            oUserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            ' Adding "BPCode" field
            '// Setting the Field's properties
            oUserFieldsMD.TableName = "OCHH"
            oUserFieldsMD.Name = "OBJ"
            oUserFieldsMD.Description = "OB Code"
            oUserFieldsMD.Type = SAPbobsCOM.BoFieldTypes.db_Alpha
            oUserFieldsMD.EditSize = 2
            '// Adding the Field to the Table
            RetVal = oUserFieldsMD.Add
            '// Check for errors
            If RetVal <> 0 Then
                oCompany.GetLastError(RetVal, ErrMsg)
                MsgBox(ErrMsg)
            Else
                'chkUDOAfter.SetItemChecked(1, True)
                MsgBox("Field: '" & oUserFieldsMD.Name & "' was added successfuly to " & oUserFieldsMD.TableName & " Table")
            End If
    Thanks
    George

    Hi Denilo
    Your suggestion did not solve the problem . I want to add that the code works fine with user-tables but not when I try with OCHH
    Thanks
    George
    After alot of search
    GC.select
    Did the job
    Thanks again
    Regards
    George
    Edited by: George Pachakis on Sep 7, 2009 6:51 PM
    Edited by: George Pachakis on Sep 7, 2009 6:54 PM

Maybe you are looking for