Error message while upgrading transfer rules
hi
while migrating transfer rules to transformations
i am getting
automatic time convension not possible for source field kmonth.
i say continue and continue i got transformations
whjat is this message how can i solve
Hi,
Please check the settings for the mappings in the Transfer Rules. Also, have you made some settings for "kmonth' ?
Similar Messages
-
Error message while asset transfer
Hi
We are getting an error message when transfering an asset from one Company code to another Company code using transaction ABT1N.
We are getting the following error message -
Error during acquisition transfer: Depr. area does not exist
Message no. AAPO107
Diagnosis
According to the specifications for transfer variant 1, depreciation area 30 should be transferred gross. However, the recieving asset 1000 INTERN-00001-0 does not manage this depreciation area.
Procedure
Check the transfer variant and the receiving asset.
Could any body please sHi,
Can you please compare both of your CODs (Spain & UK), and find, which depreciation areas were comman for both CODs.
Go to spro->img->fin acc->asset acc->transactions->inter company asset transfers->automatic inter company asset transfers->Define cross system depreciation areas->Define cross system depreciation areas---
Here create entries, for comman dep areas, which you have found in the above step.
Now set your COD (Spain) with OAPL in other session.
Again go to spro->img->fin acc->asset acc->transactions->inter company asset transfers->automatic inter company asset transfers->Define cross system depreciation areas->Assign Local to Cross-System Depreciation Areas----
Here assign the cross system areas to the respective local dep areas.--SAVE
BACK
Now set your COD (UK) with OAPL in other session.
Here assign the cross system areas to the respective local dep areas.--SAVE
Again go to spro->img->fin acc->asset acc->transactions->inter company asset transfers->automatic inter company asset transfers->Define transfer variants->choose Define transfer variant---
here create a new transfer varient according to your requirement.
After creating it, select the same variant and double click on maintain allowed entries
Here press on new entries
enter relationship type as 02 (if all of your cocds were assigned to same global company)
Cross system area- = (a single comman area, which you found above)
transfer method = 1 (gross method)
ret tran type = 300
acq trn type = 310----with this an entry will be created here, if you have more comman areas, then you have to create multiple entries here.
SAVE after creating records for each comman dep areas and use the same transfer variant, while doing ABT1N.
I hope all of your company codes were assigned to one global company only. (in OX16)
It took long time for me to write the above as step by step.
Hope this might fix your issue.
Thanks,
Srinu
SRBORIGI_CROSSDEP -
Error message while creating splitting rules.
Hi Gurus,
I am getting the below error mrssage while tryng to create a splitting rule(Z**0000012 copied from 0000000012)
Item category 20000 not obligatory in process 0000/Z002
Message no. GLT1203
Diagnosis
You have selected item category 20000. This item category is not
obligatory in accounting transaction 0000, variant Z002. This could
prevent the splitting rule for an actual document being processed
correctly.
System Response
Item category cannot 20000 be entered.
Procedure
Either choose an item category marked as obligatory, or define 20000 as
obligatory.
for Business transaction 0000 & tansaction varient Z002 item category 20000 nothing is selected(i.e forbidd,rquired,only once)
Please help me solve this & go forward with th coonfigHello,
Why not define 20000 as obligatory? It seems the only way to go.
Sorry if I was not very helpful. -
Error message while creating transfer order
Hi Experts,
My objective is to create a transfer order from a transfer requirement programatically.
I am trying to create a transfer order using FM L_TO_CREATE_TR programatically. Prior to this FM, I am calling FM L_TR_CREATE to create a transfer requirement. I am passing this transfer requirement to FM L_TO_CREATE_TR to create a transfer order.
But on execution of L_TO_CREATE_TR , I am getting an error message: THIS SCREEN IS ONLY ALLOWED FOR MANUAL TRANSFER ORDERS as a status message in the program.
Please tell how to solve this.
Thanks,
Sangeeta.Hi,
Check whether following link is helpful
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/lt04-from-lb01-1239928
Regards,
Dhana -
Error message while upgrading to System Center 2012 R2 Orchestrator
I recently tried upgrading System Center 2012 Service Pack 1 Orchestrator to System Center 2012 R2 Orchestrator on a Windows Server 2012 instance, running in VMware Workstation. According to the Microsoft TechNet documentation, you basically remove all of
the Service Pack 1 Orchestrator components, and then install the new R2 Orchestrator components.
Management Service
Runbook Service
Orchestrator console and web service
So, that's what I did. When it got to the point of running the Orchestration Console and Web Service installation, it failed.
The relevant portion of WebComponents.msi log file indicates the following:
MSI (s) (10:A8) [10:52:15:669]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIC647.tmp, Entrypoint: WriteIIS7ConfigChanges
WriteIIS7ConfigChanges: Error 0x80090016: Failed to Commit IIS Config Changes
WriteIIS7ConfigChanges: Error 0x80090016: WriteIIS7ConfigChanges Failed.
CustomAction WriteIIS7ConfigChanges returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (10:4C) [10:52:15:760]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (10:4C) [10:52:15:760]: User policy value 'DisableRollback' is 0
MSI (s) (10:4C) [10:52:15:760]: Machine policy value 'DisableRollback' is 0
Action ended 10:52:15: InstallFinalize. Return value 3.
Screenshot:
So far, I have tried removing IIS and reinstalling it completely from scratch. That has made zero impact on the problem thus far. I posted this same issue over at
Server Fault, but am adding it here for visibility.
If this post was helpful, please click the little "Vote as Helpful" button :)
Trevor Sullivan
Trevor Sullivan's Tech Room
Twitter ProfileFor anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus -
I am getting error message while attempting to upgrade the software to iOS 6.1.3
Hi,
Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3The Current iOS for the iPhone 4s is iOS 7
How to update your iPhone, iPad, or iPod touch -
Error message while while upgrading FIM RTM to FIM Service pack 1
Hi All,
I am getting the below error message while while upgrading FIM RTM to FIM Service pack 1, I had followed the same procedure in one of my test lab and it upgraded successfully. Kindly advice.
Regards,
Anirban SinghaHI Dominik,
Thanks for reply,
Event Error,
Product: Forefront Identity Manager Synchronization Service - Update 'FIM Synchronization Service Hotfix KB 2814853' could not be installed. Error code 1603. Additional information is available in the log file E:\FIMR2-SP1\logfile.txt.
MSI Logs:
CustomAction DetectServiceAccount returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:06:14: DetectServiceAccount. Return value 3.
MSI (c) (C4:10) [15:06:14:359]: Doing action: SetupCompleteError
Action 15:06:14: SetupCompleteError.
Action start 15:06:14: SetupCompleteError.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
MSI (c) (C4:20) [15:06:14:365]: Note: 1: 2262 2: Binary 3: -2147287038
Action 15:06:14: SetupCompleteError. Dialog created
MSI (c) (C4:A0) [15:06:14:376]: Note: 1: 2731 2: 0
Action ended 15:06:19: SetupCompleteError. Return value 2.
Action ended 15:06:19: INSTALL. Return value 3.
MSI (c) (C4:10) [15:06:19:627]: Destroying RemoteAPI object.
MSI (c) (C4:E0) [15:06:19:628]: Custom Action Manager thread ending.
Property(C): DiskPrompt = [1]
Property(C): UpgradeCode = {545334D7-13CD-4BAB-8DA1-2775FA8CF7C2}
Property(C): PID = 04783-270-0001260-04309
Property(C): MIIS_PATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): INSTALLDIR = C:\Program Files\Microsoft Forefront Identity Manager\2010\
Property(C): WWF35 = 3.5.30729.5420
Property(C): DOTNETINSTALLROOT = C:\Windows\Microsoft.NET\Framework64\
Property(C): SQLDB = FIMSynchronizationService
Property(C): EVENTSOURCE = FIMSynchronizationService
Property(C): EVENTPRODUCTNAME = FIM Synchronization Service
Property(C): SYNCINSTALLPATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
Property(C): GROUPADMINS = MPHASIS\FIMSyncAdmins
Property(C): GROUPOPERATORS = MPHASIS\FIMSyncOperators
Property(C): GROUPACCOUNTJOINERS = MPHASIS\FIMSyncJoiners
Property(C): GROUPBROWSE = MPHASIS\FIMSyncBrowse
Property(C): GROUPPASSWORDSET = MPHASIS\FIMSyncPasswordSet
Property(C): SQLServerStore = LocalMachine -
Error while installing transfer rules for 0PM_C03 from Business content
Hi All,
When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
"Mapping between 2LIS_17_I3HDR 2LIS_17_ORDER is inconsistent".
Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR is the datasource.
Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
Kindly help...Hi,
The datasource and infosource can have different names no issue with that.
and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
Regards,
Rathy -
hi All,
I am getting this error message while accessing IT2002
Counting rule 2/01/001 does not exist
Message no. 3H010
Please guide ASAP
Regards,
AyousefHi Ahmed,
Please go through the below mentioned thread.
scn.sap.com/thread/1187160
Regards,
Haranath -
"Failed to load excel file" an Error Message while running TDS upgrade util
Dear All,
"Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
Please help me out on this!!!!!!!!!!!!
Thanks..........Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
Thanks,
Gordon -
Getting the error message while logging through work place after upgrade
Hi,
C:\Documents and setting\YP80002\Local Settings\Temporary Internet files\Content.IE5\GTKFGH6L\tx[2].sap
Application not found
Getting the error message while logging through work place.
It is urgent
Thanks,
Sri.After upgrading the Batch file it worked fine.
Thanks,
Sri. -
Problem while transporting transfer rules in BW 3.5
Hi All,
I have a problem while transporting transfer rules in BW 3.5.
I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
The selections T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
Diagnosis
You need to select an individual DataSource based on the selection conditions
InfoSource =
Source System =
Object Version = T
Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
although the select event is not unique.
Procedure
Check the objects to which the selection applies.
Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
Regards
LakshmiHi Lakshmi,
Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
Also make sure that the Transfer rules are active before it is transported.
Hope it helps!
Regards,
Pavan -
Error message "No internal transfer number found"
Hi everyone,
I'm trying to setup the self-billing- (ERS)-functionality for scheduling agreements. The problem I'm currently facing is that I created a test-iDoc which while being processed causes an error.
The test-iDoc is sent out with the basic type GSVERF03 (I just tried the same using type GSVERF01). On my customer's side the reception is configured to use the message type SBWAP.
I also did the customizing-settings from within the ERS-monitor for the partner function (TCodes OVD5 & OVD7.... with reference number "E" & Delivery Note Number to Determine Sales Document), but in the end I still receive the error-message:"No internal transfer number found" even though it's available in the iDoc.
Does anybody have any ideas on this?!?
Any help greatly appreciated!
Thx & regards,
BobbyHi Boban,
I had same issue I solved creating number range in SNRO for object TRMNO_INT,
Regards -
Error message while Creating Work Schedule
Hi,
While Hiring an Employee, and creating a work schedule, using the work schedule rule NORM, the error message "No work schedule rule for key 2 00NORM 20100501 ##"
How do I rectify this issue?
Regards,
Arvind
Please Type the Error in the search forum ............ feild you will find lot of threads related to this issuecheck your PSA grouping in V_001P_ALL
-
Error message while executing international payroll with schema x000
Dear Team,
I am getting the below error message while running international payroll with schema x000.
"Jump from DAYPR to detailed log
Incorrect generation of wage types"
Request forum members to help me on the same.
Thank you,
SrinivasHi,
Thank you for the reply please find below i reviewed all the below tables please gothrough and advice me if any i missed out.
1) T555E-Message Descriptions----
2) T551C-Period work schedule evaluation---
Grpg Period ws Description Start Date End Date Cntg Class
01 PWTC Period WS 01.01.1990 31.12.9999 1
3) V_551C_B-Valuation class for Periodic work schedule
Grpg Period ws Description start Date End Date Val.Classfor PWS
01 PWTC Period WS 01.01.1990 31.12.9999 1
4) V_t508A-Work schedule rule
ESG ES grpg for ws Holiday Text PSG WSrule St Date End Date
2 Salaried Employee TCD TC 01 TCWR 01.01.1900 31.12.9999
5) V_001P_H-Personnel Subarea grouping for Time Recording
Personnel area Personnel Area Text Personnel Subarea Pers.Subarea Ps Group
1100 JEDDAH 1110 MAIN OFFICE 01
6) V_T555Z- Time type Determination
Can you advice me on this what I need to maintain here
7) V_T510S-Time wage type selection rule
Tm.WT Dy Grpg No Wagetype Wage Type Long Text
54 01 001 1010 Basic Pay
Regards,
Srinivas
Maybe you are looking for
-
40GB Orignal IPod suddenly not showing in Windows or iTunes on Toshiba
I recently had to reinstall my Windows XP operating system on my Toshiba laptop and when I tried to sync my 1st or 2nd generation 40GB iPod in the USB port, my computer no longer acknowledges the iPod. The Apple website solution for Toshiba laptop pr
-
How to opened the Query in WEB
Hello: Now the <b>IGS</b> has ready, I can click the query in favority when login on bw by GUID. But I can not find the fuction to open the query in WEB. Is there other thing I didn't do? Hope someone can give me some advice. Regards&Thanks! zagor
-
No up-to-date for Academic - why?
Can anyone explain why I have to buy a full version of 2.0 when I just bought the academic version of 1.5 in January? The up-to-date for $9.95 deal was denied by Apple, and now I am reading in numerous other posts that the $99 upgrade will not work o
-
How do I get iTunes to work on an old laptop with only 300mb of ram
I have an old Compaq pressario with just over 300mb of ram that i want to run iTunes on. It has a slow processor which does not meet the recommendations but I just wanted the bare functionality to run and setup an iPhone for my mother to use. It is a
-
PSE 8 monitor-output discrepancy
I've been using Photoshop Elements 8 successfully for several years. My OS is Windows XP and my printer is an Epson R1900. I consider myself to be a very good printer. But... about two or three months ago my system changed drastically. Where before I