Error messages in modem/router event log

Share on facebook Share on twitter Share on email Share on print More Sharing Services 2  Hi folks.  Just purchased a new wireless cable modem/router from Telstra (Gateway Max - Netgear C6300BD-1TLAUS).  I've just noticed the following messages in the Event Log.  Is there something wrong and, if so, what's causing it? TimePriorityDescription Sun Jun 21 13:34:47 2015   Error (4)  DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0;  Sun Jun 21 11:44:19 2015   Critical (3)  Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0;  Sun Jun 21 09:34:47 2015   Error (4)  DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0;  Sun Jun 21 04:46:49 2015   Critical (3)  Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0;  Sun Jun 21 01:34:47 2015   Error (4)  DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0;  Sat Jun 20 16:12:38 2015   Critical (3)  Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0;  Sat Jun 20 13:34:47 2015   Error (4)  DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=25:2a:8c:de:74:e8;CMTS-MAC=00:00:84:a0:1b:54;CM-QOS=1.1;CM-VER=3.0;  This is just a sample of the log file - it's much longer than this.  Appreciate any help you can provide. Thanks.NOTE:  MAC addresses above have been changed )...just to be safe. :-)

Hi Turbo, have u called and what was the response, if any? I have exactly the same error messages and my connection drops out every 24 to 48 hours without fail. Windows's Event Viewer and Intel's ProSet Diagnosis confirms that the computer was NOT being assigned an IP address. Setting a Static IP on the Local Machine does not help either. I have called them and they wanted to send out a tech. I refused because it seems very much to me that this is a software issue, either with the affected computer or with the Gateway's firmware. Doesn't sound like hardware or the pit in the street. The technician would have come and Telstra would have charged me for the visit I felt. Fred

Similar Messages

  • Cannot connect to iTunes store - error messages in Win XP event log

    I've been reading the posts and trying to connect to the iTunes store unsuccessfully for at least a week since installing the latest iTunes 9 update.
    I've tried every suggestion I have found without success including uninstalling and reinstalling iTunes. I also used MSCONFIG to do a selective startup without services and then started iTunes, no luck with that.
    I just went to Administrative Tools->Event View to look for clues.
    Every day since March 31, 2010 there are multiple error messages for Bonjour Service. Probably one error for every time I tried to go to the iTunes store.
    All of the Bonjour error messages are the same.
    The error message follows:
    ERROR: read_msg errno 10054 (An exsisting connection was forcibly closed by the remote host)
    I can see my store account information, but when I click DONE the process hangs.
    When I click on iTunes Store, the status bar goes about half way and hangs. No error messages.
    When I run iTunes network connectivity tests the results show a "Secure link to iTunes Store verified"
    Any help would be appreciated.

    Update to my original post
    Still cannot see the iTunes store. Here is a list of what I have tried so far in addition to what I mentioned in the original post:
    Changed parental controls to only allow access to iTunes U - cannot see iTunes U
    Changed parental controls back to allow all access - cannot see the store
    Updated my network driver - no change
    Investigated the Error code 10054 on the internet for a solution.
    Found this posting:
    http://www.sqlservermart.com/resources/SynAttackProtect.aspx
    Changed the registry as they recommended to include:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\SycAttackProtect{DWOR D} = 0
    Rebooted and no change.
    iTunes network diagnositcs indicates I am able to connect to the store, but the status bar still hangs up about 1/2 way into the attempt to connect.
    iTunes Network diagnostic results shown below:
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    Dell Computer Corporation DIM4500
    iTunes 9.1.0.79
    QuickTime 7.6.6
    FairPlay 1.7.16
    Apple Application Support 1.2.1
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.0.0.102
    Apple Mobile Device Driver 1.46.0.0
    Bonjour 2.0.0.34 (214.3)
    iTunes Serial Number 64B00F8F5E0A51EF
    Current user is an administrator.
    The current local date and time is 2010-04-10 13:39:14.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc. RAGE 128 PRO Ultra GL AGP
    ** External Plug-ins Information **
    No external plug-ins installed.
    iPodService 9.1.0.79 is currently running.
    iTunesHelper 9.1.0.79 is currently running.
    Apple Mobile Device service 3.0.0.0 is currently running.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {4CDE1A2C-0018-45E9-BA18-009425BD110D}
    Description: CNet PRO200WL PCI Fast Ethernet Adapter - Packet Scheduler Miniport
    IP Address: 192.168.1.101
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Sat Apr 10 12:16:18 2010
    Lease Expires: Sun Apr 11 12:16:18 2010
    DNS Servers: 72.240.13.35
    72.240.13.35
    72.240.13.5
    72.240.13.6
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-04-10 12:21:51.

  • HT2433 what does the error message that says " You are logged out because another computer is using this IP address." mean?

    what does the error message that says " You are logged out because another computer is using this IP address." mean?

    Some other piece of network ghardware on your home LAN (Local Area Network) is using the IP address your Mac is trying to use.
    Reboot both your modem and router, or the Modem/Router combo box you have, and all pieces of networking equipment, computers and printers, you have connected to your LAN.
    If you continue to get that error then it is a bug in OS X or you have your Mac set to a Static IP address that is being handed out by the routers DHCP server to some other device.

  • I keep getting an error message when I try to log into to ExportPDF through my Adobe Reader. "Network error occurred while attempting to sign in". Can anyone help, please?

    I keep getting an error message when I try to log into to ExportPDF through my Adobe Reader. "Network error occurred while attempting to sign in". Can anyone help, please?

    Hi Simon,
    I'm sorry to hear that you're having trouble logging in to ExportPDF via Reader. I've checked your account, and all is well there.
    For starters, please make sure that you have the most current version of Reader installed by choosing Help > Check for Updates.
    If you're still having trouble logging in via Reader, please try logging in to the web interface at https://cloud.acrobat.com.
    Please let us know how it goes.
    Best,
    Sara

  • [svn:bz-trunk] 14330: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

    Revision: 14330
    Revision: 14330
    Author:   [email protected]
    Date:     2010-02-22 10:03:03 -0800 (Mon, 22 Feb 2010)
    Log Message:
    BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
    QA: no
    Doc: no
    checkin test : pass
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-476
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

    Hi, wbracken ,
    As known, there are 2 different questions I raised.
    Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
    Any way, your reponse was appreciated.
    Thank you for the help.

  • [svn:bz-trunk] 14341: BLZ-476 : Getting different error message in server' s servlet log and console log when class is not of expected type.

    Revision: 14341
    Revision: 14341
    Author:   [email protected]
    Date:     2010-02-22 13:19:46 -0800 (Mon, 22 Feb 2010)
    Log Message:
    BLZ-476 : Getting different error message in server's servlet log and console log when class is not of expected type.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-476
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java
        blazeds/trunk/modules/core/src/flex/messaging/util/ClassUtil.java

    Hi, wbracken ,
    As known, there are 2 different questions I raised.
    Regarding the reply for the second one (Nothing to do with Chinese), I noticed there are several similar issues found in this forum, and it seems no response could solve my that problem. The related methods and classes were also well check, as well as the parameters put.
    Any way, your reponse was appreciated.
    Thank you for the help.

  • Getting an error message when they try to log into the Discussion Board

    I know this is not MacBook related, or maybe it is, since I have a MacBook. Anyway, this is the Discussion board I visit the most, so I thought I would post here.
    When I try to log in to the Discussion Board, I fill in my User Name and Password and press the Log In button and then the next screen comes up with an error message. I have successfully logged in, but I am not taken back to the Discussion Board I left. This is the message:
    "Error
    An error has occurred. We apologize for the inconvenience.
    Useful links:
    * Forum Home -- browse the forums here.
    * Search Forums -- visit the search page to query all forum content."
    Is anyone else seeing this? If so, how do I correct it? This is happening on Safari 3 and also with Camino. Thanks.
    Thom

    Hi all,
    just as a hint:
    There is a whole Forum for things related to the Discussion Board.
    See here: http://discussions.apple.com/forum.jspa?forumID=1076
    As for the error you get, I get it also.
    According to the a.m. Forum, Apple knows about this error and is trying to fix it.
    Have Fun
    Stefan

  • "Error while attempting to save event log" On VPN3000

    My VPN have started to e-mail the following problem.
    54438 03/29/2008 14:55:06.660 SEV=2 EVENT/14 RPT=288
    Error while attempting to save event log (operation: fopen, code:
    Anybody have any idears, I have tried to reboot but need not fix anything.
    When I try click on "Save Needed", I get the following errror "Unable to Save
    File Write Error".
    I can see that my event log is getting updated with other stuff like "IKEDBG/79" - "Phase 1 failure against global IKE proposal".

    Try re-naming the existing files, and then do the save. I had a similar problem, and I think it was a corrupt file that the system could not overwrite, but could rename. Then you can delete the old one.

  • Error 41 - Kernel Power in event log after clean shutdown - Windows 8.0

    HP Envy H9-1405A - 16MB RAM,  Windows 8.0, and up to date with updates. (16 months old but under extended h/w warranty).  All user data backed-up daily.
    After problems earlier today I noticed that after a controlled shutdown and start from cool (ie on/off button on PC, not mains power at the wall) the startup took over 10 minutes.  Event browser showed error 41 - Kernel Power - "after system crash or lost power unexpectedly",  which it definitely hadn't as I was testing a controlled shutdown.
    When starting from overnight sleep mode this morning it came up with  blue screen and an error mssage something like 'hard disk driver error', or similar (before first coffee so I wasn't really awake).  PC wouldn't restart in anything like reasonable time until powered off at wall, after which it struggled up and ran normally for a while.  Went out for a couple of hours and on return again the PC wouldn't re-start from sleep mode.  Again used the wall power switch to effect the restart and PC and after very slow restart it ran normally.  Event log showed Startup Repair ran due to a corrupted registry hive, and reboot used an earlier version.
    Checkdisk ran clean and the HP Support Assistant diags just looped for ever.
    I then tried a system restart, which worked but took a long time, and then a controlled power down and start from cool which also took a long time as described above.  I've temporarily turned off sleep mode so as to keep working.
    Question - do I have a transient software problem which might be fixable with Recovery, or failing hardware that should be covered by warranty, and where might I find some hardware diagnostics to show to the supplier?  Thanks.

    Hello @mikerb,
    I have read your post on how your desktop computer is displaying an error message in regards to a Kernel event log, and I would be happy to assist you in this matter!
    To further diagnose this issue, I recommend following the steps in this document on Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first". This should help to resolve the critical error message.
    Just to be on the safe side, I also suggest following this resource on Testing for Hardware Failures (Windows 8); which should help determine if there is a hardware defect with one or multiple hardware components on your computer.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • High number of "Network error code 0x2746" in extended events log

    In the extended event log of our database server I see 880 consecutive identical errors, all occurring between
    17:00:49 and 17:15:25. The message is:
    Network error code 0x2746 occurred while establishing a connection; the connection has been closed. This may have been caused by client or server login timeout expiration. Time spent during login: total 27 ms, enqueued 0 ms, network writes 0 ms, network
    reads 25 ms, establishing SSL 8 ms, negotiating SSPI 0 ms, validating login 0 ms, including user-defined login processing 0 ms. [CLIENT: 10.127.214.32]
    The timings in each message are a little bit different. It might be interesting to know the averages for these timings, so here is the message again, now with the timings replaced by averages (rounded to 1 digit):
    Network error code 0x2746 occurred while establishing a connection; the connection has been closed. This may have been caused by client or server login timeout expiration. Time spent during login: total 32.5 ms, enqueued 0.5 ms, network writes 0.9 ms,
    network reads 29.4 ms, establishing SSL 8.3 ms, negotiating SSPI 0.0 ms, validating login 0.0 ms, including user-defined login processing 0.0 ms. [CLIENT: 10.127.214.32]
    The client is a Citrix server that runs a COTS program. It serves approx. 20 users.
    What can be the cause of this? Can it only be the program that automatically tries to reconnect?

    Hello,
    Please read about possible causes and resolutions on the following resource:
    http://technet.microsoft.com/en-us/library/ms187005(v=SQL.105).aspx
    Please examine any certificate used for communications. Maybe a certificate has expired.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • When logging into FaceTime I get an error message and it will not log in.

    After downloading Lion, when I tried to log into FaceTime it kept giving me an error message,
    'The server encountered an error processing registration. Please try again later.'
    This is with multiple AppleIDs and my ID works on other machines.

    Having same issue here!

  • Error message appears when trying to log onto itunes:

    itunes could not connect to the itunes store.  The network connection timed out.
    Make sure your network settings are correct and your network connection is active, then try again.

    Hey SDGardella,
    Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 499"
    This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
    Thanks,
    Matt M.

  • PO Error Message: 'Foreign Trade data: incompletion log'

    Hi,
    I have all set to disable the possibility to save purchase orders with missing foreign trade data but when I try to save the document without going to the respective tabs I'm able to save it without having any error message.
    What can I do to disable this possibility.
    Thanks to all.
    Best Regards,
    NRRibeiro.

    Hi,
    Set  Error message for application 06 and message No 698 as  E for "Import data incomplete or does not exist" in the following path:
    SPRO---- >MM> Purchasing> Environment data>Define attibutes of system message>system message
    Regards,
    Biju K

  • System Error message when trying to open Log; noki...

    Hello everybody.
     I have a strange problem with a Log on my nokia 6120c. When I try to access the Log from the menu, I get a simple message: "System error" and when I press green button (on the home screen) to quick access dialed numebrs nothing happens- simply I can't access my Log. I think deleting the log should help; however, I don't know how to access it. Is there a file where the log is being stored? Maybe somewhere in C:/ memory, so I can just simply delete that file..
    I really don't want to format the whole phone (again)
    Thanks for any suggestions

    Then i guess there is nothing much you can do other then resetting or reformatting your phone.
    You can do it by following these steps:
    - A  soft reset by keying in *#7370# when on standby - This will reformat the phone. DO NOT FORGET TO DO A BACK UP AS THIS WILL ERASE YOUR ENTIRE PHONE MEMORY.
    The security code by default is 12345
    If this fails as well then you may try doing the Hard reset by performing the 3 finger reset. You can do this by switching the phone on with the '3', '*' and green 'call' buttons pressed at the same time.
    Mark me a KUDOS if this has helped...

  • LMS3.1 - Memory Insufficient Error Message from 12404 router

    Hi,
    Just wonder what is the meanning of this fault message. If only show up in DFM but not is router logging. What is the action require.
    See attachement for DFM fault message.
    PRIMPLS2PE#show memory summary
    Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
    Processor 6B010A0 1898966880 50296628 1848670252 1841231824 1847159332
    I/O 79E00000 67108864 30724036 36384828 36227920 36373788
    PCI 77E00000 33554432 33401688 152744 152744 152700
    Fast 6AE10A0 131072 129528 1544 1544 1500

    Hi Clarke,
    In 2007 I did open the ticket and TAC reply as below. Question is can I set in DFM to ignored this message or customize the threshold ?
    Problem Description
    ====================
    * Initial problem occurred when CiscoWorks reported low free memory in
    the PCI and Fast memory pools of two GSR routers.
    Analysis:
    =========
    I found that:
    * The PCI and Fast memory pools had sufficient free memory and that it
    was normal for the memory to be at such a level.
    * You cannot configure the free memory threshold for individual memory
    pools in CiscoWorks.
    Action Plan
    ====================
    * Solution to the issue was to ignore the low PCI and Fast memory alarms
    generated by CiscoWorks or to open a PER - Product Enhancement Request
    for DFM, to tackle the issue of the free memory threshold alarm.

Maybe you are looking for