Error notifications from RPTEXTPT

Hi
Whenever the transfer program (RPTEXTPT) runs, and error occurs, managers get the email giving the error message.
We need to disable it. Please let me know from where is this getting created.
Thanks
Krishna

Hi Harish,
That email is for the person running the report. Not for the managers.
Clsoing the thread.

Similar Messages

  • Error Notification from an ABAP

    Greetings All,
    We have a fairly complex interface program that goes through several updates in various areas of our system.  In error situations the user running the interface gets a message that says "Notify Cost Accounting" or "Notify Accounts Payable".  Problem we have is the user isn't notifing the people they need to.  We want the program to send an e-mail to the designated department with the error details.  However, the users running this program do not have an e-mail address listed in their user record, so sending mail directly from the program doesn't work.  Is there a way to trigger a Workflow item that will send a notification?
    Appreciate any help.
    Jay

    Jay,
    Yes that should work, as the WORKFLOW needs only a user id in the SAP system. However does your users use SAP INBOX today? IF yes, then no issues.
    Regards,
    Ravi
    Note : Please mark the helpful answers

  • Can automation plug-in gets error notification from Photoshop ?

    Hi All,
    Suppose I open the photoshop file(.psd) and font is missing in the layer. Photoshop shows error dialog box. Can automation plug-in get any kind of notification regarding this font missing in layer ?
    I want to do some stuff if font is missing in the layer.
    Any idea/logic ?
    Thanks,
    Amar

    Hi,
    Thanks Tom for the response and idea. I can now check whether the font used in text layer is present or not by checking in font list for photoshop.
    Now I am stuck in another point: load font (saved in local folder) in the photoshop in runtime. Can we update the font list of the photoshop by automation plug-in ?
    I can get font list from descriptor using "kfontListStr", update the lists like "keyFontName", "fontPostScriptName",  "fontFamilyName" and call
    "sPSActionControl->Play(&result, eventSet, descSet, plugInDialogSilent);".
    But at the moment its returning error code and I don't really know if these are enough to update font list in photoshop.
    If this can't be done by automation plug-in then let me know some idea on how to solve loading font in photoshop in runtime.
    Thanks,
    Amar

  • How to clear ERROR Notifications in SYSADMIN User

    Hi,
    version is : 11.5.10.2
    and DB is 9.2.0.7 runing on HP-UX Itanium
    We have lot of (45000) error notifications lying in SYSADMIN user.
    Can anybody suggest the best procedure to clear them out ? I dont want to delete one by one. I want to clear them at single shot. Please advise

    Hi;
    Please see below notes:
    SYSADMIN User Gets Thousands of WFERROR Notifications [ID 1299167.1]
    How To Remove Error Notifications From The Worklist [ID 357904.1]
    Also see:
    workflow purge
    How to purge old workflow alerts
    Regard
    Helios

  • Creation of notification from warranty claim (wty tcode)

    Dear all ,
    i have the requirement , where in notification (say service notification) to be created from warranty claim document i.e.., created in wty transaction code.
    i captured all the data in warranty claim like equipment , customer , sales area , material and also entered relevant notification type i.e.,S3 , but still when i click on Create notification icon in the waranty claim document, system is  unable to create notification with out any error or warning messages .
    in the actions i assigned T205 (which is used to create quality or service notification) and i checked and saved the document , but still system is not generating the notification.
    whether i missed any configuration or any thing to do at the time of creating the warranty claim .... please suggest.
    awaiting for your quick response.

    [Duplicate thread|creation of notification from warranty claim (wty tcode);
    This one being locked

  • PM Notification from ERP 6 to ERP 4.7 via IDOC

    Hallo,
    can you help me? I'll sent an PM notification from an ERP6 to an ERP 4.7 via IDOC an the same back. Did I've a chance to do this without a lot of programming with standard Function modules for example. I'm interested in all solutions. The ERP 6 side I've configured, with a SAP standard message type INOTIF and process code /ISDFPS/NO01 that works all fine. The IDOC receives in the ERP 4.7, but I can't handle it on this side. Changes in on ERP must sent to the other side.
    Thank you for all your help!
    Best regards
    Martin

    Hi Tony
    the RFC user-id needs to be a COMMUNICATION user (or CPIC, for older releases).
    Martin
    IGNORE WHAT I JUST SAID..... Do not use Communication type users at all anymore. Use SYSTEM / SERVICE users only....
    The reasoning behind this is well explained in [User Type Communication|User Type Communication].  You can also check the [Best Practice - How to analyze and secure RFC connections |http://wiki.sdn.sap.com/wiki/display/Security/BestPractice-HowtoanalyzeandsecureRFC+connections] wiki entry, however, it doesn't really help on debugging errors.
    SAProuter String: /H/xxx.xxxxxx.com/S/<;saprouter_port>/W/<saprouter_pwd>/H/
    Target Host: /H/xxx.xxxxxx.com/S/<;saprouter_port>/H/<server_name>.<domain><local>/H/
    You don't appear to be specifying the saprouter password in your SM59 router string
    Edited by: Martin English on Oct 6, 2010 3:33 PM

  • I want to send notifications to outside(i,e mail box) from oracle, and users will approve the notification from email

    Hi
    I have a client required to send notifications to outside email box, and also user will approve this notification through email.(i,e not logged into oracle and approve it) in 11i instance.
    i need to send mail from po department to finance department
    once finance department approves , then mail back to po department that your notificaiton approved.
    from address:=[email protected]
    to address:=[email protected]
    as part of this we did IMAP set up
    and used the following code. and getting the notifications from Oracle to my mail box.
    my main issue is when user approves the wf notifications, it is not showing my specified email address in the attribute #WFM_REPLYTO, always it is showing the IMAP set up wfdev address
    what is the value i need to use for this #WFM_REPLYTO
    eventhough i am sending the to_address email id to the following attribute(wf_engine.setitemattrtext), the workflow approval not working for that email id.
    only if i am using the '[email protected]' in the imap set up, then only approval is working.
    how can i override this to_email address value([email protected]) to my desired email address?
    wf_engine.setitemattrtext (itemtype => l_item_type,
    itemkey => l_item_key,
    aname => '#WFM_REPLYTO', -- to_ address
    avalue => '[email protected]' -- [email protected]
    if any body having some sample code related to this please share on this.
    Thanks
    sam

    Sam,
    Can you find any errors in the Workflow log file?
    Please review the following docs.
    Setting Different Values For Attributes #WFM_FROM & #WFM_REPLYTO Does Not Happen Or Results In SAXParseException (Doc ID 1455191.1)
    How To Change The Default From and Reply To Email Address For Workflow Email Notifications (Doc ID 760477.1)
    Thanks,
    Hussein

  • Inbound Idoc error notification. Help needed

    Hi Gurus,
    Sorry, maybe it's a silly question.
    I have a requirement to send an email when occurs any kind of error at inbound processing. The dest. of this mail must be the postprocessing agent from partner profile (WE20) of the message.
    I have standard and custom process codes.
    I've followed notes 44416 and 11610 but it still doesn't works.
    Somebody knows how can I achieve that?
    Thanks in advance,
    David Gimeno.

    Thanks to all,  but it still don't works.
    J&Y: this report is necessary to process error Idocs? As I understand, notifys an alert message if a max number of error idoc is reached.
    I've done the following things:
    - Define custom message type (WE81)
    - Bind message (custom) with Idoc type (standard) (WE82)
    - Define FM with message type (we57)
    - Define FM attributes (BD51)
    - Define Process. Code (WE42)
    - Define Partner profile with my custom Process Code.
    I've tried to link my custom process code with an Standard Object (IDOCAPPL and IDOCPACKET) at BD67, but system brings me the message B1405 Application object type  is not planned .
    I've defined all tasks at http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b81b943d711d1893e0000e8323c4f/frameset.htm as standard tasks, and I've assigned it to a Org. Structure.
    Finally, I enter an Idoc with an error wich brings to Idoc status 51 but I have no error notification. (I've found at SWI1 but no work item is generated).
    Does anyone knows what I'm doing wrong, or what else can I do?
    Thanks all in advance!!!!

  • Sending Product Activity Notification from R/3 to APO using XI

    I am trying to send a product activity notification from a backend R/3 system to APO using XI.The idoc Proact01 is getting generated and in XI when Executing transaction 'sxmb_moni' the status is showing 'processed successfully'. But in the message monitoring of
    XI runtime workbench, the messages of the adapter engine has the status 'System Error'.
    The error log is showing:
    Error Exception caught by adapter framework:
    error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was. 
    Error Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was .
    Iam using a rfc adapter in the communication channel from XI to APO and using standard mapping provided in the SCM content in SAP Marketplace.
    How can i troubleshoot this.

    Hi Again Tamoghna,
    If you use the SCM content you are on the right track!
    Try to do a bit more research regarding this content.
    I guess that the message type used in the ProductActivityNotification_In Interface has similar structure or data types to your destination object(RFC,PROXY,BAPI).
    So i suggest you to go over the SCM content documentation and you'll find the right communication channel to be used.(Don't re-invent what SAP thought about all ready...)
    One of the questions you should ask yourself regarding the Activity Notification is:
    A.Do you need a response back to the R\3 (as part of the business process?)
    B.do you have an interface in the SCM imported content called ProductActivityNotification_out.
    Good luck.
    Keep me updated....

  • How to send the Error notification

    Hi,
      Hi,
         I am having the one scenario like , i send the one record to destination using outbound that time i stored in one table sent time and date and they are send the ACK to me that time i update the table with receiving time and date using inbound program but now this enhancement is to check the receiving time and sent time if it more than 5 hrs i need to send the Error notification this process is doing every 15minst in background mode please suggest in this issue.
    Thanks,
    Harinath

    Hey
    please have a look at the following
    How to trigger alert in XI from a connected SAP R/3 4.7 system
    Thanx
    Aamir

  • HR Self-Service Transactions - error notifications

    In our HR system we are using Administrator Self Service, allowing staff to make changes to HR records for people they manage.
    In quite a few cases, our central admin team are receiving notifications with subject lines like:
    Application Error has occurred in your process Change Job and Terms performed on Bloggs, Mr Joseph
    When opening the notification, the error message at the top of the page says a range of things, such as:
    The changes were not applied because This transaction has failed because the employee's record or eligibility status has changed. Submit a new transaction.
    Another user has updated this person's record. Please reject the transaction so the initiator can check whether the change is still valid for the updated record.It would seem that the cause of these is because between the HR Self Service transaction being submitted and the error notification going out, something has changed on the HR record in question.
    Is there any way I can work out where that change is being made, or is that too hard?
    I can see the HR Self Service Transaction via:
    SELECT   hat.creation_date hrss_tx_date
           , wn.notification_id nid
           , wn.begin_date notif_date
           , wn.status
           , wn.item_key
           , REPLACE(
                wn.subject
              , 'Application Error has occurred in your process '
             ) subject
           , fu.user_name originator_uname
           , papf3.full_name hr_record_being_changed
           , fu.description originator_description
           , papf.full_name originator_full_name
           , papf2.full_name manager_full_name
           , fu2.user_name manager_login
           , fu2.description manager_description
        FROM applsys.wf_notifications wn
           , applsys.fnd_user fu
           , applsys.fnd_user fu2
           , hr.hr_api_transactions hat
           , hr.per_all_people_f papf
           , hr.per_all_people_f papf2
           , hr.per_all_people_f papf3
           , hr.per_all_assignments_f paaf
       WHERE hat.item_key = wn.item_key
         AND hat.created_by = fu.user_id
         AND papf2.person_id = fu2.employee_id
         AND hat.creator_person_id = papf.person_id
         AND papf.person_id = paaf.person_id
         AND paaf.supervisor_id = papf2.person_id
         AND hat.selected_person_id = papf3.person_id
         AND SYSDATE BETWEEN papf.effective_start_date AND papf.effective_end_date
         AND SYSDATE BETWEEN papf2.effective_start_date AND papf2.effective_end_date
         AND SYSDATE BETWEEN papf3.effective_start_date AND papf3.effective_end_date
         AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date
         AND recipient_role = 'HRMS_DEV_ROLE'
         AND subject LIKE 'Application Error%'
         AND wn.notification_id = :nid
    ORDER BY wn.begin_date DESC;But if I look at e.g. the per_all_people_f or per_all_assignments_f tables to look for changes made to the same HR record that the Self-Service transaction was for, nothing recent is returned:
    SELECT   papf.employee_number
           , paaf.assignment_number
           , paaf.object_version_number paaf_ovn
           , papf.creation_date papf_creation_date
           , papf.last_update_date papf_last_update_date
           , paaf.creation_date paaf_creation_date
           , paaf.last_update_date paaf_last_update_date
           , papf.object_version_number papf_ovn
        FROM hr.per_all_people_f papf
           , hr.per_all_assignments_f paaf
       WHERE papf.person_id = paaf.person_id
         AND papf.full_name LIKE :pn
    ORDER BY paaf.last_update_date DESC;I have seen stuff on My Oracle Support about "object version number" e.g. 1300998.1 says:
    "This is an expected behavior. Since after first approval the object version number of contact's personal details has changed. Now when you try to approve second notification we will compare the OVN in transaction tables to the OVN in database (which got changed). Hence we get an object version mismatch and above error."However, I am still stuck trying to see what has changed. I need to find this so I can go to the functional people who don't understand why they are getting the error notifications, so say "Look, this has changed since the Self-Service transaction was submitted, hence the error".
    Any advice would be much appreciated.
    Thanks

    Hi,
    In the end I wrote some SQL which identified the fact that the HR tables had been updated in Core Apps AFTER a Self-Service transaction had been started.
    SELECT distinct hat.creation_date workflow_start
           , wn.notification_id nid
           , (SELECT MAX(last_update_date) FROM hr.per_all_assignments_f paaf2 WHERE paaf2.person_id = papf3.person_id) last_assig_update
           , wn.begin_date error_date
           , wn.begin_date - (SELECT MAX(last_update_date) FROM hr.per_all_assignments_f paaf2 WHERE paaf2.person_id = papf3.person_id) dd
           , wn.item_key
                 , SUBSTR(
                      wn.subject
                    , 48
                    , INSTR(SUBSTR(wn.subject, 48 + 2), 'performed on ')
                   ) transaction_type
                 , CASE
                      WHEN SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) LIKE '%Miss%' THEN REPLACE( SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) , ' Miss' , '' )
                      WHEN SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) LIKE '%Mrs%' THEN REPLACE( SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) , ' Mrs' , '' )
                      WHEN SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) LIKE '%Ms%' THEN REPLACE( SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) , ' Ms' , '' )
                      WHEN SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) LIKE '%Mr%' THEN REPLACE( SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 ) , ' Mr' , '' )
                      ELSE SUBSTR( wn.subject , INSTR(wn.subject, 'performed on ') + 13 , LENGTH(wn.subject) - INSTR(wn.subject, 'performed on ') + 13 )
                   END performed_on      
           , wn.subject
           , papf3.full_name
           , papf3.employee_number empno
           , fu.user_name by_un
           , fu.description by_desc
           , papf.full_name by_name
        FROM applsys.wf_notifications wn
           , applsys.fnd_user fu
           , hr.hr_api_transactions hat
           , hr.per_all_people_f papf
           , hr.per_all_people_f papf3
           , hr.per_all_assignments_f paaf
       WHERE hat.item_key = wn.item_key
         AND hat.created_by = fu.user_id
         AND hat.creator_person_id = papf.person_id
         AND papf.person_id = paaf.person_id
         AND hat.selected_person_id = papf3.person_id
         AND SYSDATE BETWEEN papf.effective_start_date AND papf.effective_end_date
         AND SYSDATE BETWEEN papf3.effective_start_date AND papf3.effective_end_date
         AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date
         AND subject NOT LIKE '%Phone Numbers%'
         AND recipient_role = 'HRMS_DEV_ROLE'
         AND subject LIKE 'Application Error%'
         AND papf.current_employee_flag = 'Y'
         AND paaf.assignment_type = 'E'
    ORDER BY 1 DESCIt helped compare things in the background and prove in our case that there wasn't a system problem.
    Thanks

  • Error notification for process

    Hello
    I have a pl sql process, and catch an exception in the code.
    If the Process ready and is an exception thrown I get an success- instead of an error notification.
    How I can activate the error notification after catching exception?
    thanks for any help
    markus

    Markus - the error text you set for the process is displayed only if the process itself fails. If you handle errors within it, the process succeeds and you get the success message.
    I'd be interested to hear what others are doing, but we have done this kind of thing:
    Create a hidden page item, e.g. P1_MESSAGE.
    Set the value of that item from within your PL/SQL process, e.g:
    exception
      when others then
        :P1_MESSAGE := 'Error text here';
    end;The set the success text to &P1_MESSAGE. (with the trailing full stop).
    Does that do what you want?
    John.

  • Inbound EDI error notification - processing Work Items

    I am testing the inbound error notification. How do you change an IDoc from work item. The work item only allows you to display the IDoc, not change it. Which trans to change IDOC for reprocessing?

    Do you correct the IDOC tru WE19 (test tool)?

  • Error Notification message checksum content error in APEX 4.2

    Hi,
    We are Getting "Error Notification message checksum content error" when somebody enters wrong password in one of our installations after upgrade to 4.2
    Installation -- OEL 5.5 --> Oracle 11g --> Apex 4.2 --> Weblogic 10.3.4
    I understood from other threads, that problem is lying somewhere in apex 4.2 new feature (ajax wait count down), because i get below url in browser
    https://<url>/pex/fp=117:101:954676091282&notification_msg=Invalid%20Login%20Credentials%3Cdiv%20id%3D%22apex_login_throttle_div%22%3EPlease%20wait%20%26lt;span%20id%3D%22apex_login_throttle_sec%22%26gt;10%26lt;%2Fspan%26gt;%20seconds%20to%20login%20again.%3C%2Fdiv%3E/7179423A7E6DAB93CBFA46F23FBCF804/
    However i have similar other installations, where i do see the correct error message(Incorrect Login Credentials, Please wait for <n> seconds).
    Also i have seen that on other thread somebody giving solutions for similar error in Apache installation, but i couldn't find any for Weblogic installation.
    Please help me on this.
    Edited by: user9128312 on Dec 17, 2012 6:38 PM

    Hi,
    I just checked this on apex.oracle.com and can see both the 'Error Handling' 'sub tab' and the relevant region on the page with attributes for 'In-Line Error Notification Text' and 'Error Handling Function'. This is on the 'Edit Page' page in the builder (4000:4301). Is this the page you are on and are you still not able to see this?
    Regards,
    Anthony

  • Device Removal Error Notification

    I accidentally stepped on the USB cable of my external hard drive and my computer showed a device removal error notification and that data might have been lost. I know properly ejecting the hard drive clears out the cache, but how can you tell what data was lost. Is it obvious like an entire folder/file would be missing, or would just pieces of data from a file be missing?
    Also, it said data MIGHT have been lost or damaged. Is it possible that nothing happened at all?

    It could potentially damage multiple files, but I would consider it unlikely. More likely it would damage the disk directory, affecting the entire drive, rather than damage more than the file being written. Again, though, I won't say it's impossible.
    I've also tried to run Disk Utility on it to verify the disk, but it says the disk could not be unmounted
    Got any software accessing the drive, such as iTunes, iPhoto, or anything else that might have a file open on the drive?
    As to your query, what you're seeing seems normal. It's telling you how many files it sees (and "files" do not necessarily equal "documents"; it's what a computer considers to be a file, which can include all sorts of invisible items). As to what "clusters" are, there's a good explanation here:
    http://www.dewassoc.com/kbase/hard_drives/clusters.htm
    Regards.
    Message was edited by: Dave Sawyer

Maybe you are looking for