Error occures when posting a Billing Document to alt Reconciliation Account

Dear All,
When i try to post a Invoice, for a alternative reconciliation account, an error occures saying,
Reconciliation account 50300022 or short key 00 is not permitted
Message no. F5788
Diagnosis
The system checked the entry to see whether a reconciliation account exists with the number 50300022 and whether it can be entered here, or whether the first two characters of your entry '00' form a permitted short key. Neither of these options is applicable to your entry.
System response
Error message
Procedure
Enter either a permitted G/L account number or a permitted short key.
Please help me to sort the above.
Thank U
Yasanga

Check in OBYR configuration.
For reconciliation account xxxx you have given special GL recon account for example 22222
Now you must see that the recon account xxxx has been assigned with a GL account 22222 or some other special GL recon. account as per your requirement.
If you change recon. account in master record , you are required to run F.5D.
Just my observation likes...
Edited by: balashowry raju on Sep 9, 2010 8:51 AM

Similar Messages

  • Error ki280 when posting a billing document

    I am running into a ki280 error message when posting a billing document. This happens to be for a situation that includes a customer down payment, the error message is not encoutered when posting a billing document without the down payment interestingly enough.
    The error message is below.  Account 410000 is a revenue account, so is it looking for a type 11 cost element to be created?
    Any information appreciated.
    Create account 410000 for 02/11/2009 as a cost element in controlling area
    HEES
        Message no. KI280
    Diagnosis
        Account 410000 is a profit and loss account. You assigned it to an
        object in cost accounting (for example, a cost center, order, or
        project).
    System Response
        Account 410000 in the determined controlling area HEES must exist as a
        cost element on the posting date 02/11/2009.
    Procedure
        o   Create account 410000 as a cost element and then repeat your
            posting.

    Hi,
    Use T.Code FS00.  Choose the account to be created as cost element and click for display. Now click the edit cost element tab. Screen will open for the GL account to be created as a cost element. Enter from and to dates like 01.01.2008 to 31.03.9999 and click master data. Choose category 11 after giving the text of the cost element and save. If you want that this revenue to be posted to a cost center you can enter in the default account assignment tab.  Try to post the invoice again.  If you have further problem revert back.
    Regards,
    Sadashivan

  • Error message when posting a billing document.

    Dear Gurus,
    I want to release to accounting a billing document but the system shows following error message:
    *Reconciliation account 140030 or short key 00 is not permitted*
    Please can anybody help me with the error?
    Best regards,
    Juan

    HI,
    Have you done the Revenue Account Determination
    Goto Tcode: VKOA
    Goto - IMG - SD- BASIC FUNCTIONS - ACCOUNTASSIGNMENT/COSTING -
    1. REVENUE ACCOUNT DETERMINATION
    2. RECONCILIATION DETERMINATION
    Regards,

  • Cost Center Error Message in Posting a Billing Document to Accounting

    Hi Experts,
    I am in process of testing my form enhancement for Billing Documents especially Debit Note and Credit Notes. However, when I post my Billing Documents in VF02, this status message appears:
    "Field Cost Ctr is a required field for G/L account 2100 855020".
    Now I already checked the configuration in FS00, VKOA and we want the cost center field filled-up in the process but automatically. Do I missed some of my configuration to maintain also the Cost Center? What transaction code should I check and maintain the Cost Center for this scenario.
    Thanks a lot for your answers.

    Here is the Entire Error Message:
    Field Cost Ctr is a required field for G/L account 2100 855020
    Message no. F5808
    Diagnosis
    The value for field "Cost Ctr" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "855020" in company code "2100" linked to the field selection for posting key "50".
    System Response
    Error
    Procedure
    It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Cost Ctr". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

  • Error occuring while posting purchase of main asset in asset accounting

    Dear Experts,
    while am posting main asset using f-90 transaction code, it shows that," you cannnot post with transaction type 100 here".
    How can i resolve the problem, kindly help me.
    Regards,
    RajuPotharaju

    Dear
    SPRO- Financial Accounting New- Asset Accounting---- Valuation---- Depreciation Area-- Define depreciation area.
    Select Define Depreciation area.-  For area 1 in GL column it must 1 that is area post in real time.
    Select that area click on details button.  Posting to GL must be 1 Area post in real time.
    Regards
    shankar

  • Why does an unknown error occur when I try to save a document as a word file?

    why does an unknown error occur when I try to save a document as a Word file?

    Hi Judy,
    Deleting the Preferences files seems to be missing from your list.
    Quit AppleWorks,
    In the Finder, go to:
    username > Library > Preferences
    In the Preferences folder:
    Locate and Delete the File com.apple.appleworks.plist
    Locate and Open the Folder AppleWorks
    In the AppleWorks folder, delete the following files:
    AppleWorks 6 Assistants Cache
    AppleWorks 6 Preferences
    AppleWorks 6 Translators Cache
    Optional:
    AppleWorks Button Bars
    This file contains your Button Bar preferences. If you have made changes to the Button Bar, but hanve NO issues that can be traced to the Button Bar, it may be left in place.
    Regards,
    Barry

  • Answer to question about "Error Occurring when convertion is tried for PDF to Word Document"

    There are about ten questions about the "Error Occurring" when  using Abode Reader XLto convert a PDF to a Word Doc, but no one has the answer? It has something to do with "signing in  the wrong address". I have been working on this three days Now! Soimeone has the answer? Cataloochee

    You must be kidding to say, "Adobe doesn't convert any version of Adobe Reader."'  I must be in another world! When i move an Adobe Reader file pdf that goes to a wIndow that the top line says,'' Adobe reader X1 1001 Early Dutch History. pdf ". Then i click on the far left yellow marked icon that is used to move 1001 Early Dutch History.pdf to thye far right into a gray colored slot that reads "1001 Early Dutch History.pdf'. Under the file above  or down below, the selected File for conversionis, a selection gray slot that ask if you want to convert this file(pdf) to a .docx.,.doc, tex. or Excell. After I make the selection and click onto Convert, a message comes into view where the word convert was that reads "An Error Occurred wilth Signing In  OK" Even the use of another pdf file with a complete different address produces the same message. There are eight chapters in Dutch that I need to convert to word document by tommorrow or the class i teach "the Origin of Golf" will have to listen in Dutch and I can't speak Dutch. Cataloochee

  • Error occured for "APP-PO-14090: Document was not created

    Hi All,
    Can anbody please help for the error occured as
    "APP-PO-14090: Document was not created", while creating purchase order through Auto create feature in Purchasing Module.
    So request you please help me.
    Thanks for your response in advance.
    Thanks & Regards,
    Ram.V

    Hi All,
    Thanks for the replies, I found the sollution.
    for further references here I am providing the sollution.
    The issue happens when ship to bill to location is there but the organization is not given in the location definition form while defining the location. In order to reference the organization to location please perform the following steps:-
    1. Go into the responsibility: India Local Inventory
    2. Navigate to Oracle Inventory > Setup > Organizations > Locations > Query Location
    3. Navigate to Other tab and provide the name of organization. Save changes.
    4. Retest the issue.
    5. Migrate the solution as appropriate to other environments.
    Thanks & Regards,
    Ram.V
    Edited by: 901012 on Dec 11, 2011 11:31 PM

  • Another "An error occurred when attempting to change modules" error

    Hello all:
    After using Adobe Photoshop Lightroom on Mac OSX trouble free for the past 6 months, I opened up Lightroom today and received the following error: "An error occurred when attempting to change modules." I had not made any changes in between when it worked normally and when the error started to occur. I beleive the last thing I did before this error occurred was to go into the Print Module.
    Other information--I keep all my RAW .NEF files on an external Firewire (800) 750 GB drive. This is on Mac OS X 10.5 running Adobe Photoshop Lightroom 1.3 and also with 1.4.1. I'm running an iMac 20" with dual-core 2.2 Ghz Intel processors and 4 GB of RAM. I have around 25k images total.
    When I noticed this problem, I was on Lightroom 1.3. I immediately upgraded to 1.4.1, which did not solve the problem. I have also tried many suggestions in the forums including uninstalling the application and removing the .plist file.
    I thought I had come up with a solution by creating a new catalog, then importing the former into it. While this seems to work immediately after the import process, as soon as I close it, the problem manifests itself again.
    More details that may or (likely) may not help:
    - Going to the Develop and Print Modules gives me no problems. However, when I click on Library, Slideshow, or Web, I see the error.
    - I upgraded my Mac to the latest patch level after observing this error to no avail.
    So it looks like my choices are to create a new file and reimport every single time, or lose all of the work I've done for the past 6 months on thousands of images.
    Can anyone please help???? I promise to post the solution when we fix this darn thing so others may benefit. I'd be happy to run through any troubleshooting that y'all would suggest outside of switching to a Canon.
    Thanks!!!!
    Matt

    I'd first check for the existence of a file ending in .lock, which should be present when LR is in use, but if it exists when LR is quit, it can cause problems, and should be deleted.
    Please post back your results.

  • PL/SQL: ORA-04052: error occurred when looking up remote object.

    Hi All,
    I'm getting the following error message while executing a PL/SQL Block.
    PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
    ORA-00604: error occurred at recursive SQL level 1
    ORA-03106: fatal two-task communication protocol error
    ORA-02063: preceding line from FTSStatement
    declare
    v_coun number;
    begin
    select count(*) into v_coun
    from updluser.filestatushistory@fts;
    end;Back ground of the situation as follows,
    My DataBase version 10.2.0.3 DB Name :DB1
    Table Owner : UPLDUSER
    Table Name : FILESTATUSHISTORY
    I have a report user on the same database and I have grant all on the above table to report user
    Report User : RPT_FTS
    SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
    Database version : 9.2.0.8
    DB Name : DB2
    User Name : RPT_REPORTS
    I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
    but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Now the strange about this is that I have Created a new table on DB1 db like below;
    SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
    To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
    SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
    Just wants To know what whould have been the cause for this .
    Cheers
    Kanchana

    Hi Kanchana,
    Perhaps following link of google search has answer to your query
    ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
    HTH!
    *009*

  • The operation could not be completed because an error occurred when creating frame 19788 (error -1).

    When attempting to build a quicktime movie from my video project on final cut pro I got this message    "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".

    Kathy ...
    Better to post your topic in the Final Cut Pro community here.

  • SQL Server 2008 R2 { An Error occured when attaching database(s) }

    Hello Guys!
    I just installed SQL Server 2008 R2 a couple of days ago, on the first day use i can attach database(.mdf) with out any problem.
    on the day 2, i keep getting this error:
    http://img515.imageshack.us/img515/14/1212i.png
    TITLE: Microsoft SQL Server Management Studio
    An error occurred when attaching the database(s).  Click the hyperlink in the Message column for details.
    BUTTONS:
    OK
    after clicking the Hyperlink this window open:
    http://img34.imageshack.us/img34/8766/hyperg.png
    TITLE: Microsoft SQL Server Management Studio
    Attach database failed for Server 'STARGAZER-PC\SQLSTARMAX'.  (Microsoft.SqlServer.Smo)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600.1+((KJ_RTM).100402-1539+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
    ADDITIONAL INFORMATION:
    An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
    Unable to open the physical file "E:\New folder\DataBase.MDF". Operating system error 5: "5(Access is denied.)". (Microsoft SQL Server, Error: 5120)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600&EvtSrc=MSSQLServer&EvtID=5120&LinkId=20476
    BUTTONS:
    OK
    in that day i reinstall SQL Server 2008 R2, because I'm so confused. after that i try to attach i still got the same error, what i did is i share the folder where the database is.
    i open SSMS and try to attach and i attached without any error...
    i think this is the 4rth day, untill now everytime i want to attach a database i got this error, and even i try to share the folder where the database is i still got that error.
    any advice guys?
    Thanks a lot
    jhules
    if you want to be happy, find something you love to do and do it for free, then find someone to to you for it.

    The Error clearly shows that MDF files and LDF files are not matching or LDF file is corrupted.
    You can follow either of the one option below
    1. Restore a recent backup rather attaching the MDF file
    2. Attach  single MDF file without LOG File( Warning: All the log transactions will be gone and new log file will be created)
    EXEC sp_attach_single_file_db @dbname = 'AdventureWorks2008R2',
        @physname = N'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Data\AdventureWorks2008R2_Data.mdf';
    Thanks, Aditya Badramraju, _______________________________________________________ Please mark answered if your question is completely answered; vote it as helpful to help others find a solution quicker. This posting is provided AS IS with no warranties
    and confers no rights. _______________________________________________________

  • Error occurred during post handling RS_AFTER_IMPORT for UPDR L

    Hi friends,
    I need your help for 2 issues related to transport
    I am getting error while transporting the request from BW DEV to BW QAS..Please help me regarding this issue..
    1.)Error occurred during post handling RS_AFTER_IMPORT for UPDR L
           The errors affect the following components:
          BW-WHM (Warehouse Management)
    2.)Start of the after-import method RS_UPDR_AFTER_IMPORT for object type(s) UPDR (Activation Mode)
           Error when activating update rule
           IC=0CRM_PROD IS=0PR_IL_PROREF_ATTR error when checking update rules.
    Friends these are the two issues im facing while doing the transports._i have checked the update rules in the BW DEV it is working fine._please give some solutions to overcome this issues.
    Thanks
    Gnana Baskar

    Hi Gnana,
    Since u r telling tht the update rules are working fine in the Dev system, request u to perform some checks:
    1. The Update rule needs to be in active version.
    2. The InfoObjects used in the target InfoProvider should be present in the QA system/attached to the request in which u r transporting the changed Update Rule.
    3. Manually add objects, if needed all the Before/After objects in the new request and reactivate the Update rule, if it asks for a request give this new request number.
    4. Compare the data model in Dev and QA system and try finding the disconnect between them.
    Hope this helps.
    Regards,
    Kunal Gandhi

  • Error occured while posting the job schedule for JDBCAdapter

    Hi Experts,
    In Application Log in Path: "/usr/sap/<SID>/DVExxxx/j2ee/cluster/server1/log", I see the error:
    #/Applications/ExchangeInfrastructure/AdapterFramework/Services/Util
    ##com.sap.aii.af.service.scheduler.SchedulerManagerImpl.postJobScheduleOthers(String, int)
    #J2EE_GUEST#0##n/a##f7956e1f6b4711e0b851001e0b5d3ac8#SAPEngine_Application_Thread[impl:3]_23##0#0
    #Error#1#com.sap.aii.af.service.scheduler.SchedulerManagerImpl#Plain
    ###error occured while posting the job schedule for JDBCAdapter_9f0584b1bcb33b94b67ada456233bcb8 with 2#
    Frequently are created Lock's and I need remove them in Visual Admin.
    Any idea about this error?
    Tks in advance.

    Hi,
    After applying the SP 23 Patch Level 08, LOCK JDBC problems stopped.
    But now when a network error or database error, the JDBC Sender Communication channels that were open to connection, are blocked.
    Even following the instructions in [SAP Note 1083488 - XI FTP_JDBC sender channel stop polling indefinitely (04_04S)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1083488] the problem continues.
    I've already set the parameter "taskTimeout" and selected the option "Disconnect from Database After Each Message Processing" but not resolved.
    Any ideas?
    Thanks in advance.

  • Reg: Billing document not released to Accounting -Error

    Hi Gurus,
    I am facing a problem in Billing.I am creating a billing document and while saving the document it shows up the error " Credit Control area 1200 not assigned to Company Code 1000".
    I have checked the enterprise structure and everything regarding Credit Control Area exists in the system.
    I am able to create the billing document and release to accounting for the same company code for different payers.
    But this error occurs unique to a particular Customer's Billing Document alone.
    Please do provide me a solution to this error.
    Regards,
    Sarosh

    Hi Ravi
    Check in the enterprise structure wheather you have assigned correct credit control area to the (sales orgn+ dist channel + division) to your sales area . or not
    Secondly check in VD02 wheather you have assigned any wrong credit control area or not
    Regards
    Srinath

Maybe you are looking for