Error occurred while preparing messages for Publication or while Publishing

Hello
I'm using the rdbms event generator created with WebLogic Integration Administration Console.
When the event generator runs on both my managed servers in the cluster I get the error message below. If it only runs on one of my managed servers, it works OK.
Please advice what I'm supposed to do.
I'm using WebLogic Platform 8.1.6.
####<15.nov.2007 kl 15.27 CET> <Warning> <EJB> <sgm633> <IntServer2> <ExecuteThread: '3' for queue: 'weblogic.kernel.Default'> <<anonymous>> <> <BEA-010065> <MessageDrivenBean threw an Exception in onMessage(). The exception was:
javax.ejb.EJBException: Error occurred while preparing messages for Publication or while Publishing messages; nested exception is: java.sql.SQLException: Result set already closed.
javax.ejb.EJBException: Error occurred while preparing messages for Publication or while Publishing messages; nested exception is: java.sql.SQLException: Result set already closed
java.sql.SQLException: Result set already closed
at weblogic.jdbc.wrapper.ResultSet.checkResultSet(ResultSet.java:105)
at weblogic.jdbc.wrapper.ResultSet.preInvocationHandler(ResultSet.java:67)
at weblogic.jdbc.wrapper.ResultSet_oracle_jdbc_driver_OracleResultSetImpl.getObject(Unknown Source)
at com.bea.wli.mbconnector.rdbms.trigger.WorkerMDB.handleResultSet(WorkerMDB.java:493)
at com.bea.wli.mbconnector.rdbms.trigger.WorkerMDB.fetchUsingResultSet(WorkerMDB.java:403)
at com.bea.wli.mbconnector.rdbms.trigger.WorkerMDB.onMessage(WorkerMDB.java:232)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:400)
at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2610)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)

i also have same error during load testing, mainly this error
"Unexpected exception while enlisting XAConnection java.sql.SQLException"
i tried rerunning after increasing connection pool sizes, transaction timeout, but no luck, marginal improvement in performance though
also tried changing the default tracking levl to none, but no luck.
i am with 8.1SP5, how about you ?
do share if you are able to bypass these errors
cheers

Similar Messages

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W

OSB to Bpel -- BEA-382612: Error preparing message for dispatch

I posted this in " SOA & Process Management", but later realized that it belongs here. so posting here again.
We have Soa Suite 11g and OSB 10.3.1 runinng on unix machine. I performed the following steps:
     1. Created Bpel service and deployed on soa server 11g
     2. Imported WSDL into osb 10.3
     3. Created BS service based on WSDL and used WSDL url of BPEL(http)
     4. Created proxy service and called BS
     5. I have only one step in proxy, just to log the incoming xml
When I run the proxy, I am receiving the following error and my log is not showing any message:
     BEA-382612: Error preparing message for dispatch
Question:
     1. I enabled logging and monitoring for my service, and still not seeing any log messages. How can I enable logging?
     2. Is anything missing during the installation to communicate between OSB and BEPL using http?

Hi,
1. I enabled logging and monitoring for my service, and still not seeing any log messages. How can I enable logging?Make sure that you have enabled Message Tracing. For logging related problem, please refer -
Re: "Log" action is not working in OSB10.3.1.0
2. Is anything missing during the installation to communicate between OSB and BEPL using http?I think problem is between Proxy Service and Business Service. Proxy service is not able to invoke Business Service. Open the test console of Business Service and check the format of input required. Proxy service must pass input to BS in the same format. Use Assign and Replace action in message flow of Proxy Service to format the request going to BS.
Pay special attention to the namespaces being used.
Regards,
Anuj

I get an error message for publication type

I am using itunes producer to load a book. An error message for "publication type" appears when I get to deliver content area. I am unable to fill in that category box when I go back to that particular screen. The drop down box there shows a check mark that will disappears immediately when clicked on. I know that "digital only" or "new release" needs to be put into that box, but am unable to get any other choices for the box and can not download the book due to error message. I did enter a price in the pricing box.
Thanks for any assistance,
Don

I'm having the same problem. Have you found the answer?

Getting Err : An error occurred in the message processing program.

Hi, Im wrking with Smartforms.
I have assigned output type LD00 ,with driver prgrm name and Smf name.
after that executing with VL03N , its giving error .
Output could not be issued
Message no. VL086
Diagnosis
An error occurred in the message processing program.
Procedure
Contact your system administrator.
...Actually i have orginal prgrm (zsmf_Orginal) there i had to do some modifications , so after copying that same form into another form(zsmf_Duplicate), i made some changes there, both form are executing in T code SMARTFORMS, but while testing with VL03N , its showing above mentioned err.
Plz have eye on it.
<removed by moderator>
Regards
vivek.
Edited by: vivekd358 on Jul 10, 2010 7:35 AM
Edited by: Thomas Zloch on Jul 12, 2010 11:35 AM

closed

Error occured in number assignment for object RESB

Hello all,
While creating the production order, I am getting error as "Error occured in number assignment for object RESB" ,
How to solve this error?
Regards,
Sagar

In SNRO for Object RESB, check the definition i.e. the intervals, number ranges assigned, the buffer setup. If you're not familiar with this, seek help from your basis personnel.

J1I5 - 'Error occured in number assignment for object J_1IRG1'

Dear Friends,
Please help me.I got the following error while clicking on Register entry button.
"Error occured in number assignment for object J_1IRG1".
How can I correct it.
Regards,
Rubin

maintain numer ranges for this object.
or check in SNUM.
Regards
Peram

Error occurred in step post_index_customization_step for sync task

Hi,
We have faced this below error with staging index process. Could anyone help me understand under what condition this RemovedItemException will show up?
Not sure if any BCC project have tried to remove any item while the index was running. Kindly provide your comments.
ERROR [nucleusNamespace.atg.searchadmin.core.IndexLoader] (Thread-18903) Error occurred in step post_index_customization_step for syn
c task 14300002 of type complete. Error:
atg.searchadmin.core.IndexLoaderException: atg.repository.RemovedItemException: getPropertyValue called on removedItem: commerceRefineConfig:rc68035.canInher
itFromGlobal
atg.searchadmin.core.IndexLoaderException: atg.repository.RemovedItemException: getPropertyValue called on removedItem: commerceRefineConfig:rc68035.canInher
itFromGlobal
at atg.searchadmin.core.IndexLoader.completeIndex(IndexLoader.java:1473)
at atg.searchadmin.core.IndexLoader.executeSession(IndexLoader.java:2043)
at atg.searchadmin.core.IndexLoader$IndexingThread.run(IndexLoader.java:2486)
Caused by: atg.repository.RemovedItemException: getPropertyValue called on removedItem: commerceRefineConfig:rc68035.canInheritFromGlobal
at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:928)
at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1249)
at atg.repository.RepositoryItemImpl.getPropertyValue(RepositoryItemImpl.java:128)
at atg.commerce.search.refinement.admin.CommerceRefinementConfigurationCollector.createOrUpdateCategoryRefineConfig(CommerceRefinementConfigurationCo
llector.java:347)
at atg.commerce.search.refinement.admin.CustomRefinementConfigurationCollector.getRefineConfigContainerForCategory(CustomRefinementConfigurationColle
ctor.java:438)
Thanks,

Hi,
We have faced this below error with staging index process. Could anyone help me understand under what condition this RemovedItemException will show up?
Not sure if any BCC project have tried to remove any item while the index was running. Kindly provide your comments.
ERROR [nucleusNamespace.atg.searchadmin.core.IndexLoader] (Thread-18903) Error occurred in step post_index_customization_step for syn
c task 14300002 of type complete. Error:
atg.searchadmin.core.IndexLoaderException: atg.repository.RemovedItemException: getPropertyValue called on removedItem: commerceRefineConfig:rc68035.canInher
itFromGlobal
atg.searchadmin.core.IndexLoaderException: atg.repository.RemovedItemException: getPropertyValue called on removedItem: commerceRefineConfig:rc68035.canInher
itFromGlobal
at atg.searchadmin.core.IndexLoader.completeIndex(IndexLoader.java:1473)
at atg.searchadmin.core.IndexLoader.executeSession(IndexLoader.java:2043)
at atg.searchadmin.core.IndexLoader$IndexingThread.run(IndexLoader.java:2486)
Caused by: atg.repository.RemovedItemException: getPropertyValue called on removedItem: commerceRefineConfig:rc68035.canInheritFromGlobal
at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:928)
at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1249)
at atg.repository.RepositoryItemImpl.getPropertyValue(RepositoryItemImpl.java:128)
at atg.commerce.search.refinement.admin.CommerceRefinementConfigurationCollector.createOrUpdateCategoryRefineConfig(CommerceRefinementConfigurationCo
llector.java:347)
at atg.commerce.search.refinement.admin.CustomRefinementConfigurationCollector.getRefineConfigContainerForCategory(CustomRefinementConfigurationColle
ctor.java:438)
Thanks,

I try to send emails after I have recieved. They are hotmail accounts. message says"cannot send mail and error occurred delivering this message. I have tried deleting and restarting. I have tried shutting phone down completely and restarting. no help...

I am trying to send emails via a hotmail account on my i phone 5 and get the following message despite recieving e mails. "cannot send mail an error occurred delivering this message"... i have tried to restart phone to no avail. I have tried to delete and re input account to no avail. I need help

Hello lclaunch22
You may need to validate the account with Hotmail. When logged in to the Hotmail account on a computer, there are instructions on how to do this.
iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
http://support.apple.com/kb/ht1694
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Error: 1013020 Cannot clear data for database [Daily] while other users are

I'm trying to clear a (BSO, v 11.1.2.1) database, and it's failing with the following message:
Error: 1013020 Cannot clear data for database [Daily] while other users are connected.
There are no other users connected first of all. Second of all, I've never had a database fail to clear just because other users were connected. Has anyone seen this before?
Sabrina

WHen ever u start essbase application ..there is services starts in task manager called "ESSSvr" . The number get increased when keep opening as number of application you open ..So what i say is when u see no users in sesssion and no batch runs ahead , u can stop the Application in EAS and automatically it will log off all the users from that respective application ..And then start again the application and u can perform ur task
this usually happnes when some one is connected with excel addin or Same EAS open by another user remotely..thats what i have seen in my exp's

Error occurred during WM processing for posting change delivery

Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
    The indicator AUFER from the delivery type contradicts the
    storage location constellation that was determined by the
    WM system.
    TVLK-AUFER = '<VAR2>'
    WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...Gopi

Hi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir

An error occurred searching the certificates for the server. ...

Hi,
I am using DSEE 6.2 in Fedora 7
Each time I access the "Security" tab of my server in DSCC. I get the following error:
"*An error occurred searching the certificates for the server. An authentication error occurred connecting to xxxxx. Check that the User ID and password are correct*"
I need to click the "Click here to update authentication" link in the same tab and enter the User ID and password for the user that create the server. The error will gone for this session but reappear as I start a new session in DSCC

This looks like a known bug. Please log a support case so this can be investigated further
http://sunsolve.sun.com/search/document.do?assetkey=1-1-6537622-1

Errors Occured or missing messages

I have a cube which has a red request 'Errors occured or Missing Messages' any ideas to resolve this one?

Did the request turn RED on its own due to timeout settings or did you manually turn it red ? Missing messages usually indicate that there is a process still running and the completion message is not returned by the system.
In the details tab, check the status of each package. Also you can find where the process is stuck...is it in transfer rules / update rules or post processing...
If the request turned red due to timeout setting, then just repeat the delta and you delete the failed reqeust from the cube.
Good luck!

How to create a error message for Deleted batch while creating a PO

Hi ,
Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
when a PO is created for a deleted batch at GI &GR lebel it is showing a error message,
but i want to show a error message while doing the PO creation.
Thanks,
Sachhi

in badi me_process_po_cust u can put this message
METHOD if_ex_me_process_po_cust~check.

I keep getting an error message that read 'an error occurred saving your changes to Apple database" while trying to upload an ebook using itunes producer? What gives

I've been trying to upload a nebook using itunes producer but keep getting an error message ' an error occurred saving your changes to the Apple database. This may be a transient issue on the Apple side' What's going on? It's been giving me this mesage for the whole afternoon.

Hi,
Maybe the radio connection on the other end is not working. Hope this helps.
xxmitchxx90

Error occurred while preparing messages for Publication or while Publishing

Similar Messages

Maybe you are looking for