Error on Purchase Order - Document number 45* not within defined interval
Hi All,
PLEASE HELP ME or guide me in the right direction.
I am faced with a somewhat unique case in our enviroment. Some background first.
Back in 2000 when we upgraded from Walker to SAP, a number of Purchase orders had to be migrated, one of them is the order i am struggling with. Back then very little validations were built in, resulting in a Local Order being incorrectly created as a International Order but against a local currency.
Now this ordered is still being reflected as open in our system. When attempting to change the order by activating the 'Delivery Complete indicator", we get an error "use only foreign currency" This is due to the fact that validations against Document Type and Currency was created in 2003 and are in full operation now. It is hard coded thus i can not remove this easily.
Now when attempting to get around this by changing the Document Type to a Local Purchase order or trying to delete a line, we get the error below.
"Document number 45* not within defined interval"
Number ranges do come to mind based on the error description, however, Local Orders have a number range of 45, International Orders have a number range of 47. In this case, the order is created as a International Order BUT the number range is 45*, again, due to a lack of validations/incorrect config back in 2000
Do any of you know a possible solution to such a problem.
Regards,
Jody Ponnusami.
The validation of document type and currency is not standard, and if this validation cannot be deactivated, then you will have to resort to making changes in debug mode. Put a breakpoint at the relevant check and force it to accept the current combination.
The second option is to update EKPO table manually using SE16N. Set the delivery completed indicator to X.
Similar Messages
-
Document number 5000000013 not within defined interval
Experts ,
When I am trying to create PO(ME21N),
System is showing the error
Document number 5000000011 not within defined interval
Message no. 06223
Diagnosis
The document number you entered does not lie within the interval defined for purchasing documents.
Procedure
Contact your system administrator if changes need to be made to the number range interval.
Help me to solve the issues
RegardsHi Rahul,
Change your document type and try once again.for creating PO in ME21N you need to select standard PO (NB).
Check and revert back
Thanks
Ram -
Document number not within defined interval
I am trying to assign my own po number with idoc pordcr101
i am using the next po in our system 4500016058.
when i look in we02 after sending the idoc i see
document 4500016058 not within defined interval.
can i assign my own po? do i need to define my interval somewhere?
any help would be greatly appreciated.
thank youHi Janice,
You are trying to create a PO with your specified Number, but in R/3 document numbers can exist only in the interval specified, hence check the number range in your R/3 config. and accordingly pad your number with 0's.
Or you will have to change the interval ( Basis Job ).
P.S. Also check if your R/3 allows External Number generation.
Regards. -
Purchase order document row is not change (document stutas is OPEN)
Hi all,
I am created one purchase order that are not any base or targeted document ,not any approval procedure and purchase order document status is steel open . Then how I a cannot change the document row.
thanks
arabinda palHi Deepa,
I think if you want to restrict the further editing of a particular row, then you just need to follow the simple procedure.
1. create the purchase order with your desired items & vendor & add this document
2. Now reopen it & goto that row which you want to restrict. Right click on that row & select "Close Row".
3. Select yes to confirmation message.
4.Now update the document.
Now you an check it out, in that document you will not be able to edit that row contents.
I hope this solves your issue.
Regards.
ShriX. -
i'm getting following errors plz help to eradicate then
|No instance of object type PurchaseOrder <
PO header data still faulty <
Document number 1000222 not within define<
Please only use plants with local currenc<
|Can delivery date be met?
my peice of code is
loop at it_final into wa_final.
IT_PO_ITEM-PO_ITEM = WA_FINAL-POSNR.
IT_PO_ITEM-MATERIAL = WA_FINAL-idnrk.
IT_PO_ITEM-PLANT = WA_FINAL-WERKS.
IT_PO_ITEM-QUANTITY = WA_FINAL-menge.
IT_PO_ITEM-stge_loc = WA_FINAL-LGORT.
IT_PO_ITEM-PO_UNIT = WA_FINAL-meINS.
IT_PO_ITEM-NET_PRICE = WA_FINAL-PREIS * IT_PO_ITEM-QUANTITY.
IT_PO_ITEM-PRICE_UNIT = WA_FINAL-PEINH.
APPEND IT_PO_ITEM.
IT_PO_ITEMX-PO_ITEM = WA_FINAL-POSNR.
IT_PO_ITEMX-MATERIAL = 'X'.
IT_PO_ITEMX-PLANT = 'X'.
IT_PO_ITEMX-QUANTITY = 'X'.
IT_PO_ITEM-stge_loc = 'X'.
IT_PO_ITEMX-PO_UNIT = 'X'.
IT_PO_ITEMX-NET_PRICE = 'X'.
IT_PO_ITEMX-PRICE_UNIT = 'X'.
APPEND IT_PO_ITEMX.
endloop.
wa_po_header-po_number = d_ebeln.
wa_po_header-comp_code = d_bukrs.
wa_po_header-doc_type = d_esart.
wa_po_header-VENDOR = d_lifnr.
wa_po_header-pur_group = '001'.
wa_po_header-creat_date = SY-DATUM.
wa_po_header-created_by = 'VIVEK'.
wa_po_headerX-po_number = 'X'.
wa_po_headerX-comp_code = 'X'.
wa_po_headerX-doc_type = 'X'.
wa_po_headerX-VENDOR = 'X'.
wa_po_header-pur_group = 'X'.
wa_po_header-creat_date = 'X'.
wa_po_header-created_by = 'X'.
CLEAR D_BUKRS.
CLEAR D_ESART.
CLEAR D_EBELN.
CLEAR D_lifnr.
call function 'BAPI_PO_CREATE1'
exporting
poheader = wa_po_header
poheaderx = wa_po_headerX
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* POEXPIMPHEADER =
* POEXPIMPHEADERX =
* VERSIONS =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
IMPORTING
EXPPURCHASEORDER = wa_ebeln
* EXPHEADER =
* EXPPOEXPIMPHEADER =
tables
return = it_return
poitem = IT_PO_ITEM
poitemx = IT_PO_ITEMX.
* POADDRDELIVERY =
* POSCHEDULE =
* POSCHEDULEX =
* POACCOUNT =
* POACCOUNTPROFITSEGMENT =
* POACCOUNTX =
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
* POLIMITS =
* POCONTRACTLIMITS =
* POSERVICES =
* POSRVACCESSVALUES =
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POEXPIMPITEM =
* POEXPIMPITEMX =
* POTEXTHEADER =
* POTEXTITEM =
* ALLVERSIONS =
* POPARTNER =
if sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
MESSAGE I001 WITH 'Purchase Order ' wa_ebeln ' Created'.
ENDIF.
CALL SCREEN 1001.
ENDCASE.
plz help if u can can.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 19, 2008 12:29 PMHi Vivek,
Looks like BAPI requires some more fields to be populated. All the mandatory parameters do not have data.
Y dont you do a test to the BAPI in SE37 by giving some sample data and execute it. When it's processed with out any error then you can consider that all those parameters you populated in SE37 should be populated in your program too.
That way you wont any errors.
Plz get back for any further clarification.
I hope it helps.
thanks. -
Error:-document is in transfer for purchase order..creation is not possible
Hello,
While doing confirmation of PO I am getting this error, saying "document is in transfer for purchase order..creation is not possible".
can anyone please suggest me solution on this type of error?Hi,
Is the PO in ORDERED status? Is there any confirmation posted for this PO which might be stuck (idoc failed to reach back end)?
If it is a case of idoc failure, then reprocess the idoc and then do the next confirmation.
regards,
MRao -
Error in allocating RG23D document number Interval not found Number object
Dear
Expert
Error in allocating RG23D document number Interval not found Number object J_1IRG23D
I tried the solution given in the forum but its not working,
Pls help me out.
Thanks and Regards
DeepankarHi,
As a know that this is a problem of number range and I mentioned the same(SNUM> given the object and maintain the number range of this fiscal year but it didnt work also searched in the forum but didnt got any other solution so posted the issue.
hope now its clear.
Thanks and regards
Deepankar -
Error in : Purchase order Creation using BAPI_PO_CREATE1
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
* Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
* Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP.Hi Shareen,
I think in the following parts of the code,
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = <b>i_ekpa[].</b>
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
<b> poitem = i_bpoi[]
poitemx = i_bpoix[]
poschedule = i_bpos[]
poschedulex = i_bposx[].</b>
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
i_create_order,
i_cycle TYPE cycle,
i_qty_acpt TYPE dzmeng,
i_dly_date TYPE vbak-vdatu,
i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
i_vbap TYPE vbap,
i_ekko TYPE ekko,
i_ekpo TYPE ekpo,
i_bsoh TYPE bapisdhd1,
i_bsohx TYPE bapisdhd1x,
i_bpoh TYPE bapimepoheader,
i_bpohx TYPE bapimepoheaderx,
i_vbeln TYPE vbeln_va,
i_posnr TYPE posnr_va,
i_contr TYPE vbeln_va,
i_conit TYPE posnr_va,
i_ebeln TYPE ebeln,
i_ebelp TYPE ebelp,
i_pargr TYPE pargr,
i_thead TYPE thead,
i_line TYPE tline,
i_note TYPE txw_note,
i_new_vbeln TYPE vbeln_va,
i_new_ebeln TYPE ebeln,
i_wa_bsoi TYPE bapisditm,
i_wa_bsoix TYPE bapisditmx,
i_wa_bsop TYPE bapiparnr,
i_wa_bsos TYPE bapischdl,
i_wa_bsosx TYPE bapischdlx,
i_wa_vbpa TYPE vbpa,
i_wa_vbkd TYPE vbkd,
i_wa_bpoi TYPE bapimepoitem,
i_wa_bpoix TYPE bapimepoitemx,
i_wa_bpos TYPE bapimeposchedule,
i_wa_bposx TYPE bapimeposchedulx,
i_wa_bpop TYPE bapiekkop,
i_wa_ekpa TYPE ekpa,
i_message TYPE char72,
i_bapiretn TYPE bapiret2,
i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
c_char_e VALUE 'E',
c_char_p VALUE 'P',
c_char_g VALUE 'G',
c_char_i VALUE 'I',
c_char_s VALUE 'S',
c_char_x VALUE 'X',
c_zsw(3) VALUE 'ZSW',
c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
IF NOT i_create_order IS INITIAL .
CLEAR: i_create_order .
MOVE: wa_order_split_create-docnr TO i_ebeln,
wa_order_split_create-docitm TO i_ebelp .
CALL FUNCTION 'ME_EKKO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
IMPORTING
po_ekko = i_ekko
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
ENDIF .
Fill PO Header
i_bpoh-comp_code = i_ekko-bukrs .
i_bpoh-doc_type = i_ekko-bsart .
i_bpoh-vendor = i_ekko-lifnr .
i_bpoh-langu = i_ekko-spras .
i_bpoh-pmnttrms = i_ekko-zterm .
i_bpoh-purch_org = i_ekko-ekorg .
i_bpoh-pur_group = i_ekko-ekgrp .
i_bpoh-currency = i_ekko-waers .
i_bpoh-agreement = i_ekko-konnr .
i_bpoh-incoterms1 = i_ekko-inco1 .
i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
i_bpohx-comp_code = c_char_x .
i_bpohx-doc_type = c_char_x .
i_bpohx-vendor = c_char_x .
i_bpohx-langu = c_char_x .
i_bpohx-pmnttrms = c_char_x .
i_bpohx-purch_org = c_char_x .
i_bpohx-pur_group = c_char_x .
i_bpohx-currency = c_char_x .
i_bpohx-agreement = c_char_x .
i_bpohx-incoterms1 = c_char_x .
i_bpohx-incoterms2 = c_char_x .
CALL FUNCTION 'ME_EKPO_SINGLE_READ'
EXPORTING
pi_ebeln = i_ebeln
pi_ebelp = i_ebelp
IMPORTING
po_ekpo = i_ekpo
EXCEPTIONS
no_records_found = 1
OTHERS = 2.
IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF .
Fill PO Item
i_wa_bpoi-po_item = i_ekpo-ebelp .
i_wa_bpoi-material = i_ekpo-matnr .
i_wa_bpoi-plant = i_ekpo-werks .
i_wa_bpoi-stge_loc = i_ekpo-lgort .
i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
i_wa_bpoi-po_unit = i_ekpo-meins .
i_wa_bpoi-tax_code = i_ekpo-mwskz .
i_wa_bpoi-val_type = i_ekpo-bwtar .
i_wa_bpoi-item_cat = i_ekpo-pstyp .
i_wa_bpoi-acctasscat = i_ekpo-knttp .
i_wa_bpoi-agreement = i_ekpo-konnr .
i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
i_wa_bpoix-po_item = i_ekpo-ebelp .
i_wa_bpoix-po_itemx = c_char_x .
i_wa_bpoix-material = c_char_x .
i_wa_bpoix-plant = c_char_x .
i_wa_bpoix-stge_loc = c_char_x .
i_wa_bpoix-quantity = c_char_x .
i_wa_bpoix-po_unit = c_char_x .
i_wa_bpoix-tax_code = c_char_x .
i_wa_bpoix-val_type = c_char_x .
i_wa_bpoix-item_cat = c_char_x .
i_wa_bpoix-acctasscat = c_char_x .
i_wa_bpoix-agreement = c_char_x .
i_wa_bpoix-agmt_item = c_char_x .
APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
i_wa_bpos-po_item = i_ekpo-ebelp .
i_wa_bpos-sched_line = '0001' .
i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
i_wa_bposx-po_item = i_ekpo-ebelp .
i_wa_bposx-sched_line = '0001' .
i_wa_bposx-delivery_date = c_char_x .
i_wa_bposx-quantity = c_char_x .
APPEND i_wa_bposx TO i_bposx .
CLEAR: i_pargr .
SELECT SINGLE pargr
INTO i_pargr
FROM t161
WHERE bstyp = i_ekko-bstyp
AND bsart = i_ekko-bsart .
CLEAR i_ekpa[].
CALL FUNCTION 'MM_READ_PARTNERS'
EXPORTING
application = c_char_p
ebeln = i_ebeln
bstyp = i_ekko-bstyp
pargr = i_pargr
TABLES
x_ekpa = i_ekpa.
LOOP AT i_ekpa INTO i_wa_ekpa .
i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
i_wa_bpop-langu = sy-langu .
IF NOT i_wa_ekpa-lifn2 IS INITIAL .
i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
ELSE .
i_wa_bpop-buspartno = i_wa_ekpa-parnr .
ENDIF .
APPEND i_wa_bpop TO i_bpop .
CLEAR: i_wa_ekpa, i_wa_bpop .
ENDLOOP .
CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = i_bpoh
poheaderx = i_bpohx
IMPORTING
exppurchaseorder = i_new_ebeln
TABLES
return = i_bapiret2
poitem = i_bpoi
poitemx = i_bpoix
poschedule = i_bpos
poschedulex = i_bposx.
i_order = i_new_ebeln .
SHIFT i_order LEFT DELETING LEADING '0' .
i_return-errortype = c_char_i .
i_return-workarea = c_zsw .
i_return-message = '064' .
i_return-variable1 = i_order .
loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
append i_bapiretn to t_bapi_return .
endloop .
if t_bapi_return[] is initial .
i_create_order = c_char_x .
CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
EXPORTING
act_return = i_return. "Popup with new PO no.
ENDCASE . " Docind
ENDIF .
ENDLOOP. -
Purchase order document external send status
From other posted messages that table NAST is not related to table SOST.
We send PO to vendors via Esker Fax, therefore, the external sent status can be viewed via transaction code SOST. Data of external sent is maintained in table SOST. But the document number is not linked with SOST table. Is there any other way I can get the external sent status for each external sent document?
Thanks,
Maggie Chen
The Solae Company
[email protected]The vendor e-mail address is picked up from the master data and the purchaser's e-mail would be picked up from their user account. The problem is that I don't know at what stage in the program SAPFM06P, used for sending the purchase order, I could set up the distribution list.
If I set the vendor address to name.address@somewhere; name2.address@somewhere else this works and both name and name2 receive the e-mail. But it would mean the purchasers ammending the vendor e-mail address each time, which just isn't practical.
I probably should have said that I'm using SAP version 46c and the e-mail is sent using standard SAP settings for 5-External send using program SAPFM06P and form MEDRUCK.
Thanks for the advice
Karen
Message was edited by: Karen Dean -
External order document number in Substitution Switchover (F&R)
Hello,
We're using F&R as a stand alone system, there's a question for product substitution follow-up time controlled.
When getting the substitution switchover information from the legacy system (non SAP) into F&R, the external order document number (org_ref_h, org_ref_i, org_ref_sched) is needed (interface error without these fields).
But since we're not using SAP Retail, there's no outbound delivery that triggers the substitution (no PO number), therefore no external order document number is available to F&R. Substitution will happen after F&R receives the switchover information and when the switchover date is reached.
In this case which order document number should we use?
Thanks,
YangHi Yang,
could you solve this issue meanwhile?
The fields org_ref_h, org_ref_i and org_ref_sched are not obligatory to fill. But you told you got an error.
Kind regards, Rainer -
Error while detrmining Internal Document Number for Excise Invoice.
Hello mate, I am trying to create excise invoice for for factory sale. while saving the document I am getting an error" Error
while detrmining Internal Document Number for Excise Invoice. Message: Maintain Number Range for J_1IINTNUM". I have already maintained number range for mentioned object "J_1INTNUM" in TCODE SNUM , still getting error. Please solve my querry . Is it related to transport or number range activation or something else? I have maintained number range with serial no. "01"Hello ,
Ensure that number ranges are properly maintained in the respective client that should be the year specific.Some times even u maintained the system should not consider that number ranges due to table updation problem ,because i had faced the same in the earlier and received the reply from the sap stating that this error was occured rarely after the years,so please ignore that ,for your problem u first come out of the screen and then re log in and then create the excise invoice ,then check the number ranges .
Please revert for any
Kalyan -
Authorization based on plant and Purchase order document type
Hi
My client has a requirement wherein a user will have authorization for transactions only in his plant. But only for Purchase order document type UB (Stock Transport Order) the user should be allowed to create for all plants.
In short, if Purchase order document type is UB, should be allowed for all plants
if Purchase order document type is NB, should be allowed to only one particular plant.
My Basis person says that such a restriction is not possible.
Kindly suggest me on how to provide a solution to this.
Thank U.Hi,
This is possible.In this case you need to create two seperate roles.
1)Create purchase order for all plants (This can be used in long text)
2)Create purchase order for <plant no> plants.
For case 1:--
i)Populate field BSART of M_BEST_BSA with UB.
ii)Populate field WERKS of M_BEST_WRK with '*'. SAP reccomends to fill up organizational data through organizational level tab only.So while doing this step you need to put * from organizational level tab only.
For case 2:--
i)Populate field BSART of M_BEST_BSA with NB.
ii)Populate field WERKS of M_BEST_WRK with 'plant no'.
Dont worry about the objects i mentioned those are maintained through SU24 and will be automatically pulled once you insert ME21 transaction code.
Let me know if it helps.
Thanks,
Aveek -
Purchase order Document date in AP Downpayment invoice PLD
Dear All,
Is it possible to capture purchase order Document Date in AP Down payment invoice PLD.My client want like this.I have tried,but i am not able to capture this field in AP Down payment invoice PLD.please give me the solution for this,If it is possible.
Thanks,
Silpa.Nhi silpa,
Create a user defined field in row level of marketing documents.
Apply formatted search using query
Select $[OPOR.TaxDate]
select auto refresh
when changing field Document Date in header level.
On copying purchase order to ap downpayment invoice Document date will copy to it.
U can also bring it to PLD by creating database field with table DPO1,column U_XXX
Hope it will solve problem.
Jeyakanthan -
WBS Element and Service No Link Table for Purchase Order document
Hi Experts,
We are Facing 1 Problem for finding link between
WBS Element and Service No for corresponding Purchase Order document . Please Suggest me to find Related tables for Project system Module .
Thanks and Regards
BalaNarasimman.MHi,
The link will be in MM table, not PS table. Try EKKN.
Regards -
Standard Purchase Order document printing
Hi All,
I need to modify the standard purchase order document and need to print a custom note in that based on the organization criteria.
i have downloaded the .xsl file and as i am not very familiar with that i cant understand the code.
1)could you please let me know, where to open that xsl file either in jdeveloper or some thing like notepad, textpad etc..
2)If possible please share the tags to print the custom message based on organization criteria
3) where to find the xml tags related to that to modify the xsl
Please help!!
Thanks!!We need to investigate this XSL tags and need to do R&D. I finally did it.
Maybe you are looking for
-
Issue settings.sol in Flash Player 14.0.0.145
Hello, First of all I apologize for my bad english. I have identified a problem with settings.sol of (in combination with) Flash Player 14.0.0.145. Below I try to explain the problem; Scope: Adobe Flash Player 14.0.0.145 Windows 7 x64 | x86 Internet
-
Event ID 27 from sourese1 cannot be found
In server 2012 r2 In event viewer we are getting this warning error
-
I've edited a 2 minute in HDV 720p24 and I'm trying to export using QuickTime Conversion to .mov and .flv. When its done, (on both files in both high / low res) I get "stutters" or brief jumps in my video, in general, but not always the same spots. W
-
Hi I randomly get following error while searching my database using context index: ORA-29902: error in executing ODCIIndexStart() routine ORA-20000: Oracle Text error: DRG-00100: internal error, arguments : [50935],[drpn.c],[992],[],[] DRG-00100: int
-
Can I have a SQL statement in a Custom Function in Crystal Reports 2008
I'd like to create a custom Crystal Reports function which does a database lookup. Is this possible? In the pseudo code below "v_le_afe_xref" is a dataource in the report. A syntax check fails on the select. Function legal_entity_co (old_co AS numbe