Error Personnel subarea grouping (MOABW) is not maintained.

Hi
Error message reflecting Personnel subarea grouping (MOABW) is not maintained while approving leave through MSS tab.
Need help.
Rgds
RKG

Hi;
Can you check table V_001P_ALL
You have to check personnel subarea grouping for absence and attendance types in the table
Regards;
Okan
Edited by: Okan Caliskan on Sep 13, 2011 5:45 PM

Similar Messages

Logon Error Message - Enterprise Services Builder address not maintained

Hi Experts,
I'm about to start the configuration on PI PROD (PI 7.1) server, but I keep encountering an error, saying "Service cannot be reached"
Service cannot be reached
What has happened?
URL http://hostname:port/nwa call was terminated because the corresponding service is not available.
Note
The termination occurred in system PIP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /nwa is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:XXXXX_PIP_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
What's more weird is that I can't launch sxmb_ifr because 'Enterprise Services Builder address not maintained'.
I already made some RFC Destination such as AI_DIRECTORY_JCOSERVER, AI_RUNTIME_JCOSERVER, LCRSAPRFC, and SAPSLDAPI and when I test the connection, here's the error message said 'Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67'
Thanks for the reply.

Hello,
Check if you have more than one system. If so, check whether host, port and URL of startpage are maintained on the correct one.
Also, please follow the MANUAL steps of the SAP Help link below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Ensure you have created the RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59
(ABAP) and the Visual Administrator (Java):
AI_RUNTIME_JCOSERVER
AI_DIRECTORY_JCOSERVER
LCRSAPRFC
SAPSLDAPI
Last, please check whether, In tcode SM59, the destination INTEGRATION_DIRECTORY_HMI.
The user maintained in the Logon tab should be PIISUSER
and ensure he password is correct,and check if the destination will test successfully.
All of those will solve this issue
Regards,
Caio Cagnani

BDC error BM302 : Internal unit &, language & is not maintained

Hi Experts,
I have Unit of measurements defined as below in T006A Tables ( Configured through CUNI tcode)
SPRAS MSEHI MSEH3 MSEH6 MSEHT      MSEHL
EN        UNT     UNT      UNT       UNIT         Unit
HU        UNT     DRB      DRB      Darab      Darab
Through BDC Prpgram i have created an inforecord ( using ME11 transaction ), where Logon Language = HU. It is created successfully. When i try to open the created info record using ME12, the unit ( EINA-LMEIN) is displayed as '**' and it throws message "Internal unit DRB, language HU is not maintained ". When i Checked in database EINA-LMEIN is saved as '**'.
But when i create the Info record manually in ME11, No issues .The database EINA-LMEIN is correctly saved as 'UNT'.
I couldn't figure out the issue , whether problem is in my BDC program or Language dependent configuration of the unit in CUNI. Please help in solving this issue , Am i missing something ?
Thanks in advance.
Regards,
Murali

Hi Murali,
You might be missing some more configuration (T table entries). To determine what that is -
Process the info-record using ME12
Start debugging "/h"
Once debugging starts - place Breakpoint At MESSAGE statement
F8
Program control will stop at every message triggered and one of them would be you message. Check the code around the message (and call stack if required) and you might see the reason for the error
Cheers,
Aditya

FERT materials costed without error even if Accounting VIew is not maintain

Hi Gurus,
Please help with this scenario.
in our client, they were able to run cost estimate for FERT materials even if accounting view is not maintained in the material master. in my understanding, costing run should generate error report that accounting view does not exist. Please advice.
Thanks!

Dear,
Use T.code OMS2.
Select Material Type & Click on detail button.
See the quantity / Valuation area TAB.
In Valuation Updating heading :
In No Valuation area button should be selected for Non value-added material.
Accounting view is mandatory for all Valuated Materials in material Master.
From valuation class it will fetch GL of material type to valuated material.
From Standard Price it would fetch price for STD cost estimation to run.
Hope above will useful.
GOPAN

Error FGV002: Fiscal year variant & is not maintained for calendar year &

Hi all,
I am facing a unique problem in BW production. This is not happeneing in my Development.
Whenever I goto table "/BI0/SFISCPER" or do F4 on any Fiscal Year / Peiod field, I get the message " Error FGV002: Fiscal year variant R1 is not maintained for calendar year 2005" . In my client R1 is Shortened Fiscal Year. But we are not using this for year 2005 and most years. And the message is Type Error. I tried to debug but the code enters in 100 odd Function Modules and does not give any answer.
My Finance Person has checked the settings in transaction SPRO > SAP Reference IMG > BW Customizing Implementation Guide > Business Information Warehouse > General BW Settings > Maintain Fiscal Year Variant). They are exactly identical to R/3 production setting.
I have already done rebuild of Fiscal Year Variant from Source System by right clicking and loading data again.
I am using BW 3.0B with Bi Content 3.1 . Please advise urgently.

Hi TCS
Please check these SAP notes in advance:
1619823
1835628
Please advice if this helps.
Regards
PC

Error: Lock profile for approval procedure not maintained in Customizing

Hi,
We are working on the CHARM approval process. I have noticed that without selecting an approval procedure, I select the status (Awaiting business approval) on which the approval workflow is triggered, the system gives below error:
Select an approval procedure first
Lock profile for approval procedure not maintained in Customizing
Approval procedure and approval steps are locked automatically
This locks the approval procedure and the RFC can no longer be processed further. Why is that happening ? Anyone can select the status by mistake and lose the RFC, is there a way to stop this or at least reset it ? the lock procedure is already maintained in approval procedure customizing.
Best Regards.

Hi Karthik,
Thanks for the quick reply, however the settings mentioned on page 38 are already in place i.e. the approval procedure gets determined correctly based on change category (rule policy) and also is locked after putting it to 'Awaiting Approval'
But the problem exists - setting the status 'Awaiting App.' without selecting app.proc, will result in a total lock of the RFC.

Updation Error in "Group Personnel Subareas for the Work Schedule "

Hello everyone,
While trying to assign a PS grouping code to my Personnel Area here, I am facing a problem.
I can't see them in the table mentioned above .
Already checked the previous steps in Enterprise structure i.e creation PA and PSA, they are displayed properly in respective tables but I can't find them here in grouping for work schedule.
Could any one of you be kind enough to throw some light on possible errors and their solutions.
Thanks & Regards,
Vibhu

Hi,
Just now I am able to sort out this problem, Actually we need to carry out "Maintain User Parameter" activity under 'Personnel Administration'
IMG Steps are as follows :
SPRO => Personnel Management => Personnel Administration => Basic Settings => Maintain User Parameters
Following screen will come up
here select the country you like to work on (in my case it is India)
Select Continue
A pop up will come stating "Parameters created for India"
Select Continue
User profile screen will come up
Save it
Now go to time management section of IMG
Go to "Personnel subarea grouping"
Personnel areas belonging to your country grouping will be displayed on screen.
Thanks,
Vibhu

Error "Ledger group 0L may not be used" - CO15

Dear guru,
When I want to save Production Order Confirmation via CO15, there is an error message :
Ledger group 0L may not be used
Message no. FAGL_LEDGER_CUST102
Diagnosis
Ledger group &1 is assigned to another application.
FYI, when I check tabel T881 (Ledger Master), there are two leading ledger : 0L and OL. It's very strange.
As far as I know, in standard SAP there is only one leading ledger, it is 0L.
I check in customizing (Ledger > Define Ledgers for General Ledger Accounting), there is only one ledger: OL (as leading ledger), so I untick Leading Ledger indicator for Ledger 0L directly on table T881, but the error message still appear.
How to solve this?
Thanks before

Hi Hanny Ali,
The message F5 670 is processed if there is a problem in account determination. The message means the account determination in the SD billing document does not work probably. This could also be caused by a wrong or incomplete customizing.
Please find note 146879 to check the customizing on this issue. From past messages, this problem is usually caused by a missing or incorrect customizing for the G/L account.
Please note that if it's a case of a cancellation document the field VBRK-SFAKN is filled. When this is filled the system does not carry out account determination. In debug you can remove this entry and the account determination will be revoked. This would resolve the issue.
Could you please review customizing setting VKOA if all the relevant information are being maintain correctly?
Please also review the notes:
-> 0216974 Error F5670 during release to accounting
-> 0113512 VF051 "Doc. & saved (error in accnt determination)
-> 1325446 SDBONT06: G/L accounts of rebate conditions are
I hope this answer your issue with error F5 670.
Best Regards,
Vanessa.

SAP BW DTP error: Fiscal year variant is not maintained for calendar year

Hi experts,
Running DTP for loading 2LIS_12_VCITM results in following error "Fiscal year variant A2 is not maintained for calendar year 2012".
I have already done following checks:
- the fiscal variant A2 exists for the fiscal year 2012 in the BW system (T009 tables)
- the DTP does only give this error for 2 company codes, and works fine for other company codes
- in our R3 system, the fiscal year variant A2 is assigned to all the company codes, how or where can I check this assignment in the BW system ?
Kind regards, Guy Verschueren

Hi
Please check the following threads
"Fiscal year variant V3 is not maintained for calendar year 2011" (OAOB)
Error FGV002: Fiscal year variant & is not maintained for calendar year &
Hope it helps.
Thanks,
Rajesh.
Please assign points to answers if you find them heplful

KEPM: Error msg if plan selling price is not maintained in VK11

Hi
I am using KEPM (COPA Planning tool)... I am entering my sales qty plan in KEPM and then valuating my plan sales qty to get Sales Revenue and Std cost for the Qty entered
If the std cost is not released, system gives an error based on my settings in the costing key.. Similarly, i want an error, if the selling price is not maintained for the material in VK11
In the IMG step "Define Valuation Strategy", I have assigned a SD Pricing Procedure for Valuation Strategy 002, Application Type "V" and Qty Field as ABSMG.... This Pricing procedure has a condition type named ZPLN
I entered sales plan for 10 materials but Plan Price is maintained in VK11 for ZPLN only for 9 materials... But system did not give any error and posted the sales revenue as zero for one material
I believe, currently I have not done any setting to issue any such error msg.. Can this be done??
Rgd, Ajay

Hi Kamala,
I would kindly ask you to check transaction OKEQN with your relevant planning version you are using in KEPM and where the above error occurs.
The system checks within derivation (where the error comes from) if the characteristic value is valid for a specific date set within the version (thus trans. OKEQN). If you have PRCTR '1000 102C511' not valid for the date set in the version within OKEQN, then this error message is justified, as the system realises that the PRCTR was not valid by that time.
Could you please check this? If the profit center is not valid for this date please adjust the date to a more recent one.
Best Regards,
Abhisek Patnaik

Partner profile not maintained error while testing inbound processing

Hi gurus,
I am trying to upload a customer master data using LSMW idoc method, I followed all the required steps and then I tried to test the inbound processing using T.code we19 and there i gave my basic type as debcor01 and I clicked on standard inbound test but it gives me an error which says partner profile is not maintained, but I have maintained the partner profile and assigned the same in LSMW. So anyone of you can please help me to solve this problem.
thanks,
Rajeev

Rajeev,
Check whether the Account Category is mantained properly or not.
K.Kiran.

Error inALE service (Segment type not maintained in Message type) status:29

Hi all,
Need your help.
I have a added the a segment to the message type and which is linked in WE82( Message type:Debmas,basic type:debmas06 and extensionZxxx). And the segment is also set for release.It is an outbound senario. When i process it manually in WE19 using the basic type with the enhancement and via message type (with the message type and the extended type) I can process the idoc and the segment whic i have added with the following fields are displayed. But when i post the customer in BD12 with the message type I am getting the error in BD87 as " error in ale service Segment type ZXXX does not exist in message type DEBMAS".
PLease do the needful. Its since 2 days I am struck with the same and was trying but I could not get any. Hope you guys might help me.
Anything else to be refreshed or anything else to be done except we31.we30, we81
Thanks in advance.
Edited by: Farhy Farhy on Aug 2, 2010 12:29 PM

Thanks for your reply Mr. Das.
I have tried all the things and did not find any solution..
Posted after checking all the things and the procedure. I did not write any custom program. Earlier I created the extension type and deleted and created the new extension type. But now it is taking the same old extension type and giving the error as the extension type is not maintained in the message type.
I have deleted the old extension type completely but the old is onle getting reflected. Anything to be done to refresh.
Waiting for the reply.

Personnel Subarea groupings for a multiple country system

We have more than 70 countries in our SAP system and more coming to be rolled out. We mainly use the HR funtionality for time recording. So, for the configuration of personnel subarea groupings in Time Recording we used the country grouping: e.g. Singapore Molga = 25, MOABW = 25, MOVER = 25, etc. For the 'SAP-countries (countries for which SAP has a template) we use MOLGA as personnel subarea grouping, for the NON-SAP countries (countries for which SAP has no template) we use a 2 digit number downwards from 98. Now we are running out of 'numbers'.
Has anybody similar problems and can you please share with me possible solutions?
Thank you very much and looking forward to your replies,
Doris

Dear Doris,
Several other possibilities exist for the grouping (not only PSG),
for example :
A) the "Employee subgroup grouping for time quotas" (ESG)
which is a char1 field (so you can use many more then the ones you
use at the moment)
B) field "Quota type selection group" (Quomo), from the documentation
of this field in V_T559L:
"Quota type selection rule group
You can use the quota type selection rule group to control absence
quota type selection based on the employee's organizational assignment.
Using different quota type selection rule groups, you can set specific
rules for quota generation.
Use
Quota generation is carried out in the schema using function QUOTA.
There are three ways of setting the quota type selection rule group:
1. Using function MOD in the time evaluation schema
Function MOD calls a personnel calculation rule that has been modified
to suit the respective schema (for example, XMOD, MODT, or TMOD). The
employee subgroup grouping for personnel calculation rules is queried
in the rule using operation PAYTP. Using operation MODIF Q=xx,
you can determine (for ach grouping) which quota type selection rule
group shoulde be used in time evaluation to access the entries
for the relevant employees in the Leave Accrual table.
2. Using a personnel calculation rule you have written yourself in the
time evaluation schema
In this case, you also set the quota type selection rule group using
operation MODIF Q=xx.
3. Using feature QUOMO
You can use the feature to set the quota type selection rule group based
on other organizational assignments. It is queried by the system during
time evaluation."
As your main issue seems to be the use of several different quota
requirements, you can define, via the use of field QUOMO in V_T559L,
for quota type 10 (just as an example) several different generation
rules (one for each Quomo).
Please note that quota 10 does not need to be always generated in the
same way, it can have a different generation rule for each key
combination of V_T559L.
The most flexible way to select which quomo should be used is via the
feature QUOMO. There you will have the following decision fields
BUKRS Company Code
WERKS Personnel Area
BTRTL Personnel Subarea
PERSG Employee Group
PERSK Employee Subgroup
MOLGA Country Grouping
MOURA Personnel Subarea Grouping for Leave Types
TRFAR Pay scale type
TRFGB Pay Scale Area
TRFGR Pay Scale Group
TRFST Pay Scale Level
SCHKZ Work Schedule Rule
PERNR Personnel Number
ANSVH Work Contract
CTTYP Contract type
Hope this helps,
Regards,
Shree

Fiscal Year Variant not Maintained

Hello All,
while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600".
but i have configured Fical year variant and assigned to co code, i am able to post the transactions for all the periods i.e financial year 2010.
here my question is whether we need to maintain the Fiscal year variant separately for Asset accounting in ECC 6.0.
Please Suggest
Thanks
Shankar

hi,
please check the below path,
spro--Financial Accounting (New) -- Asset Accounting -- Valuation -- Fiscal Year -- Fiscal Year Variants -- Specify Other Versions on Company Code Level and Specify Other Versions on Depreciation Area Level.
check the above path, is there any FY is assigned to your company code or Depreciation Area.
regards,
Gopi.P

Fiscal year "A3" Variant is not maintained for Financila year 2010

Hello All,
while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600".
but i have configured Fical year variant and assigned to co code, i am able to post the transactions for all the periods i.e financial year 2010.
here my question is whether we need to maintain the Fiscal year variant separately for Asset accounting in ECC 6.0.
Please Suggest
Thanks
Shankar

Hi Murali and Christian,
Thanks for your reply..
now i have configured year dependent fiscal year to my co code, if i configure calender year i am able to create the Asset master
please help
Thanks
Shankar

Error Personnel subarea grouping (MOABW) is not maintained.

Similar Messages

Maybe you are looking for