KEPM: Error msg if plan selling price is not maintained in VK11

Hi
I am using KEPM (COPA Planning tool)... I am entering my sales qty plan in KEPM and then valuating my plan sales qty to get Sales Revenue and Std cost for the Qty entered
If the std cost is not released, system gives an error based on my settings in the costing key.. Similarly, i want an error, if the selling price is not maintained for the material in VK11
In the IMG step "Define Valuation Strategy", I have assigned a SD Pricing Procedure for Valuation Strategy 002, Application Type "V" and Qty Field as ABSMG.... This Pricing procedure has a condition type named ZPLN
I entered sales plan for 10 materials but Plan Price is maintained in VK11 for ZPLN only for 9 materials... But system did not give any error and posted the sales revenue as zero for one material
I believe, currently I have not done any setting to issue any such error msg.. Can this be done??
Rgd, Ajay

Hi Kamala,
I would kindly ask you to check transaction OKEQN with your relevant planning version you are using in KEPM and where the above error occurs.
The system checks within derivation (where the error comes from) if the characteristic value is valid for a specific date set within the version (thus trans. OKEQN). If you have PRCTR '1000 102C511' not valid for the date set in the version within OKEQN, then this error message is justified, as the system realises that the PRCTR was not valid by that time.
Could you please check this? If the profit center is not valid for this date please adjust the date to a more recent one.
Best Regards,
Abhisek Patnaik

Similar Messages

Cannot save billing, when the sales price is not maintained in VK11

Dear Expert,
I want to block billing when the sales price is not maintained in VK11?
How to block it?
Thanks
SAP Support

Hi,
We cannot have incompletion procedure at the billing document level.It will be happened at the sales order level.
But we can control this one either by using the user exit or any ABAP code.
Goto the T.Code "V/06".Select your condition type.Details.Maintain the value as "A" for the field "Manual entries".
Goto the T.Code "V/08".Select your pricing procedure.Details.
Maintain this condition type as required.
Save.
This ensures that it should fetch values for this condition type automatically i.e. from condition record.Else it will throw an error message.
Regards,
Krishna.

Error msg in GR for excise details not maintained

Dear All,
I need to know whether it is possible to have an error message generated in MIGO if the material does not have j1id maintained for it. if yes, please suggest possible solutions.
regards

No not possible in Std SAP
When J1ID details are not maintained excise tab does not comes,
if excise tab does not comes then its clear excise details not maintained in J1ID
and there is no std message for this and logical it is not required also , If u set a error message in some user exit than system will expect details in J1ID for all the material, and even for those materials who dont have excise.
If than also u have to have error message if J1ID details not maintained u will have to use user exit
where u can write and logic not only on material but also tax code in Po or condition record for excise
ie if that PO has excise tax code or condition record for excise than check if details are there in J1id if not error
hope its clear

Error msg. states: the iPad "iPad" could not be updated. An unknow error occurrred (-1).

error msg. states: the iPad "iPad" could not be updated. An unknown error occurred (-1). My iPad is 16gb series 2 i believe wifi enabled

Hey there charlottefromwilliamsburg,
I see that you are experiencing and issue when attempting to update your iPad. Here is an article for you that may help you address this error:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-kw/TS3694
I would suggest that you particularly pay attention to the information in the following section, which addresses error codes such as the one you have been given:
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Unit selling price is not updating

Hi
I am updating unit selling price of an item using API.
code:
   v_line_tbl (1).request_date := SYSDATE;
   v_line_tbl (1).unit_selling_price := 299;
in the above code request_date is updating to sysdate but selling price is not updating.
how to do this?
Thanks

The CALCULATE_PRICE_FLAG is in the OE_ORDER_LINES_ALL table. This setting could override determines pricing engine calls which could be overriding your update.
Values -
Calculate Price (Y)
Partial Price (P)
Freeze Price (N)
Thank you,
Debbie

TS3694 trying to restore from iTunes back onto iPhone 5 - it starts but then error msg comes up saying there is not enough space on the iPhone to complete the restore - what do I do?

trying to restore from iTunes back onto iPhone 5 - it starts but then error msg comes up saying there is not enough space on the iPhone to complete the restore - what do I do? - Help cos I've lost my contacts!!!!!

If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

In KEPM error msg ' not all profitability segment can be processed'

Hi
PL HELP ME WITH THE FOLLOWING ERROR, when doing 'enter planning' in KEPM.
Message no. KG803
Diagnosis
You cannot maintain all of the profitability segments in the current transaction. This could be due to the following:
1. Errors occurred when characteristic values were derived for the profitability segments.
If this is the case, you can display the error messages under the menu option "Extras -> Error logs -> Derivation".
In the log , it says
Diagnosis
The characteristic "PRCTR" ("Profit Center") should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value (" 1000 YB999") is not valid in CO-PA.
Thanks
kamala

Hi Kamala,
I would kindly ask you to check transaction OKEQN with your relevant planning version you are using in KEPM and where the above error occurs.
The system checks within derivation (where the error comes from) if the characteristic value is valid for a specific date set within the version (thus trans. OKEQN). If you have PRCTR '1000 102C511' not valid for the date set in the version within OKEQN, then this error message is justified, as the system realises that the PRCTR was not valid by that time.
Could you please check this? If the profit center is not valid for this date please adjust the date to a more recent one.
Best Regards,
Abhisek Patnaik

Received the following Error Msg: Platform Version '6.0' is not compatible with minVersion =6.01, maxVersion =6.01

When I brought up my machine this afternoon, it started to download 6.0.1 and then I received an error msg from ZoneAlarm requesting that I upload an error file. This occurred several times, and then I uninstalled the Firefox files and again downloaded 6.0.1. At this point I then received the Version 6.0/6.0.1 error msg.

If you use ZoneAlarm Extreme then you may have to disable that during the installation to prevent ZA from blocking access to some files in the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Error msg "package org.apache.xmlrpc does not exist ... "

Hi everybody,
I am new to java. While creating build through cruise control Error Msg comes
BUILD FAILED
Ant Error Message: C:\Program Files\CruiseControl\projects\Myproject\build.xml:47: Compile failed; see the compiler error output for details.
C:\Program Files\CruiseControl\projects\Myproject\src\org\xtpl\admin\common\CallBack.java:9: package org.apache.xmlrpc does not exist
import org.apache.xmlrpc.*;
C:\Program Files\CruiseControl\projects\Myproject\src\org\xtpl\admin\common\CallBack.java:18: cannot find symbol
symbol : class XmlRpcClient
location: class org.xtpl.admin.common.CallBack
XmlRpcClient rpcClient = new XmlRpcClient();
Can anyone help me out!
Thanks,
Sunil Braroo

check your classpath.

IPhone 4 - deleted images, after got low memory error msg rcvd, but available memory has not increased!!

I have an iPhone 4 16GB. Was recording a video the other day, and got this msg: "Warning: You are running out of disk space. Please delete some photos or videos". Ok, so I had like 5,000+ images in my "camera roll", don't have any other folders. ALOT were from the Internet, when I would hold down on an image, and pick "save image". So, using common sense, I went into camera, under camera roll, then hit arrow icon in bottom left corner, and proceeded to check mark images. Once I had a group, I'd hit delete. I did this several times, until I was left with only about 1/2 the amount of images, which was about 3,000. I rebooted my iphone. I then went into settings> general> about, and looked under available, which still showed only about 100MB available out of 14GB. How is this possible? Now, when I go into camera, the lense won't even open, and I keep getting the same error msg. Maybe 3,000 is still alot, but remember, I had almost 6,000 images before, with NO problems till just a few days ago. So, how do I get my iPhone available memory back, if already deleted images, as instructed???

You need to connect the iPhone to the computer and import those photos to the computer. Photos are not really supposed to be stored in the camera roll as it can cause problems, as you have already seen. Also, should the iPhone crash, you could lose all of the photos without having a backup of them. Once you have downloaded all the pictures, you should be able to go into Explorer and delete everything out of that folder. Then reset the iPhone and it should clear the memory. The iPhone is probably holding the memory because the Library hasn't updated. A sync would help as it tends to reset things. I've read of other issues with keeping too many photos in the camera roll and issues with saving from the Internet as well, however much of that was in earlier versions of iOS. I believe that has been corrected.
Once you have imported the photos and deleted them from the camera roll, you can sync them back through iTunes in the Photos tab if you want them on the phone.

Error msg "Firefox setup stub 27_0_1_exe could not be downloaded." Why?

Using the following link Every time I try to download firefox, I get the error message.
http://www.mozilla.org/en-US/firefox/new/#download-fx
Firefox setup stub 27_0_1_exe could not be downloaded. I am using Vista 32b OS, IE9 browser

Try downloading the full off-line installer package from here. <br />
http://www.mozilla.com/en-US/firefox/all.html

HT5577 when i log in my id the error msg shows ddat dis id yet not has been log in to i tuens.... what to do????

pls help me

What does the error message tell you to do?
Also, try posting in your native language. Perhaps someone here is fluent in your language.

Print to Video Error msg: audio and vide devices may not match

When I attempt to print to video (using a Sony DV deck that has werved me well for years) I receive the message:
"The selected audio and video devices may not match:
-Apple FireWire NTSC (720 X 480)
Please verify that the audio and video outputs are externally routed to the intended device(s).
Do you want to proceed?"
I tried proceeding, and the video images output to the tape but without a sound track.
What to do? I must deliver a tape to my client!
I recently did a software update to 10.4.6. Could that be part of the problem?
Of did some setting change somewhere without my knowing it, and I need to reset it, if so what?
Thanks in advance

Hello!
Thank you for this. I did check the audio playback settings and it was NOT set to audio follows video. I then CHANGED it as you have kindly instructed. The audio video settings box you mention was NOT checked, so I didn't need to do anything there.
I then tried o launch Print to Video (not Edit to Tape) and sadly, the same error message occurred. Any suggestions would be much appreciated.
I am running FCP 4.5, recently upgraded to OS 10.4.6
Thanks in advance.
Hey Pamela,
Have you been monitoring externally this whole time?
If you have, and you've been getting external audio
and video, then this is probably a case of a
setting being off somewhere.
First, check your View > Audio Playback
setting. It should be set to Audio follows
Video.
Second, press Option-Command-Q to bring up the
Audio/Video Settings dialog. Click on the right-most
tab (A/V Devices) then confirm that the box for 'Use
Different output for Edit To Tape/Print To Video' is
not checked.
And please confirm that you're doing a Print to Video
and not an Edit To Tape. I ask because the only time
that I can remember getting this message is when I've
tried to do an Edit To Tape and didn't drag the
correct sequence from the browser (if I remember
correctly, I accidently dragged a sequence that was
also open in timeline).

Have MBP with OSX10.9- trying to connect HP Laserjet P1102w error msg on add printer says driver not available from apple - workarounds?

Trying to connect a new HP Laserjet P1102w printer via USB to a MBP running OSX 10.p and fully up to date. Problems getting the correct driver - does it exist and what are the workarounds?
Many thanks

Lots of information on the HP web site for this printer with Mavericks, a driver is available for 10.9. Try this web page and go from there.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=uk&dlc=en&s w_lang=&product=4110304

When opening, error msg shows "Platform version '50' is not compatible with minversion =5.0.1 Maxversion 5.0.1 , How Fix?

Have Windows Vista Business

Firefox crashes when you open it
https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it
Check and tell if its working.

KEPM: Error msg if plan selling price is not maintained in VK11

Similar Messages

Maybe you are looking for