Error: Scope in your query does not exist...

I have an advanced search web part on my page, and wanting to narrow the search scope to my particular site. In trying to accomplish this, I have created a scope in central admin, and modified the Advanced Search web part properties xml to reflect the scope
I created. Within the ResultType tag of that xml, I have this to specify my scope
<KeywordQuery>"scope"='This Site'</KeywordQuery>
After doing this, I attempt a search, but I am getting the following error "Scope in your query does not exist". Am I missing anything? Has anyone ran into this previously? If so, I would appreciate your insight...I have not been able to find any
blogs on this issue. This is on SharePoint 2010.
Thanks

Hi Spawn,
You can specify your search scope in the ResultType tag like below:
<Query>"scope"='Your Scope'</Query>
Here is a detailed artcile, I suggest you can take a look for reference:
Specify Default Scope for Advanced Search Box Web Part without Using Scope Picker
Best Regards
Zhengyu Guo
TechNet Community Support

Similar Messages

Scope in your query does not exist

I've created a Search Center Site Collection but the results aren't being refined based on the scopes and I'm getting the message that the Scope in your query does not exist The query is being formed correct as this is what the url displays:
/Sites/Search/Results.aspx?k=bcm&s=BCM
The scope contain one Include rule and the rule seems to work, in that it is finding items (118 in the below example) but the Total is 0. I've tested this similiar configuration in another test site and it shows the same number for both Item Count AND
Total AND it works correctly so I'm guessing this is the issue.
Any ideas?
Joe

Inderjeet,
Both the dev and prod are different is that dev is using a search site col and dev is using just a search page as follows:
dev - http://dev.com/Search/Results.aspx?k=test&s=ACM
prod - https://prod.com/Sites/Search/Results.aspx?k=Test&s=ACM
As for permissions...I noticed that the Ribbon is greyed out in the Search Site Col. I'm an Owner and can add users to that group but am not being provided any access to ribbon.  Could that be an issue?    I still find it
odd that the Scope indicates results but that Total is blank.
If I rerun the query while on the results search page then it returns results
https://prod.com/Sites/Search/results.aspx?k=test, so it can find the data.
Joe

Error - The requested query does not exist on the current server

Hi all,
We've started to get an error when exeucting queries on our BW system. The erorr is "The requested query does not exist on the current server". Even though I can go in an change the query on the server, I get this message when I try to execute it. I also get the same message when I try to run the query in RSRT.
Has anyone else run into this problem?
Thanks!
~Matt

The problem that we had was due to a pre-query not transported up. We transported up the missing pre-query and everything worked fine. If you go into change mode on the query and press the check button. It should tell you which query is missing.

Error : Query does not exist in user group

Hello,
I copied the one existing transaction i.e. Z10SD25 and made the new transaction.
Also i created the new Infoset and Query in an existing User group.
I also assigned the Infoset to user group and query to Infoset.
But while running the new transaction it is giving me error that 'Query does not exist in user group'.
Kindly help me with this.
Thanks in advanced.
Regards,
Darshana

Hi,
After assigning the Infoset to user group and query to Infoset, click on 'Generate' button.
Note: The query can only be generated when the InfoSet is assigned to a user group.
Also check whether the usergroup is given or not for queries.
SQ01 - Select Environment u2013 Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving

This query does not exist in the database in the system

I have created a query, but when I run it, I receive this error:
You have attempted to open query 0DAT from the Query Designer.
However, this query does not exist in the database in the system to which you have made a connection.
Thanks
Joseilton

dear Joseilton,
the variable 0DAT ist not in active version in your system.
Use BC to activate the variable 0DAT from InfoObject 0CALDAY.
or
you have to create it in your system. therefor change the namespye to SAP-namespace (starting with 0). Open one Query in your system via RRMX and select CalenderDay to create a new variable.
name:                0DAT
descrition:          current calender day
processed by:        SAP EXIT
Characteristic:      Calender Day
variable represents: Single Value
best regards
imberaureus

Error 1070023 Configured Disk volume does not exist.

Hi
I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
Error 1002097 Unable to load database Basic.
The App log showed the following error
Error 1070023 Configured Disk volume does not exist.
Please help..

So everything works when the volume is set to E?
If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems...

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error message FI 759: Fund does not exist in FM area

Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
    fields' in the standard layouts, in other words depending on the
    permissibility of the initial value for a field an entry is always
    demanded. To prevent this there are two options:
    a) Copy the desired standard layout into an own (transaction KP65,
       KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
       set the corresponding field to 'Optional". Then, add this layout
       to your planner profile with transaction KP34.
    b) Implement the attached program ZK555134 (correction instruction
       461025). After the entry of planning area and layout all fields
       of the Funds Management are set depending on your selection of
       'Optional' or 'Not optional' (standard system). Like this you can
       also change standard layouts. The check for the fields for which
       'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa.

Error(27,78): Reference PartnerLink1 does not exist as wire target

I am starter to BPEL.. when i am trying to invoke webservice(http://www.webservicex.net/convertMe...ight.asmx?WSDL) i am getting these errors
Error(27,78): Reference PartnerLink1 does not exist as wire target
Error(90): Element 'targets' not expected.
Edited by: 974508 on Dec 2, 2012 8:09 PM

maybe you first created the partnerlink in the bpel instead of the composite?
create the reference in the composite, see if you get the wire from the bpel to your convert-service and then go to the bpel process and use the invoke to call the partnerlink
if you did all this (recreating the service in the composite would maybe be the easy fix)

Build error :package com.sun.javadoc does not exist

Question from a Turing machine expert who is new to Java.
Trying to run a sample program from Richardson's book "Java JDK 5 Edition" Chapter 1.
In Netbeans 5.5 receive build error :package com.sun.javadoc does not exist
for "import com.sun.javadoc.*;"
Believe missing classes are in tools.jar in C:\Sun\SDKee5SDK\jdk\lib
How do I define this to Netbeans and/or JDK?
Using java_ee_sdk-5_01
and netbeans-5_5-windows downloads.
Platform is XP.
Netbeans has been updated to date.
Appreciate.

sony_tj wrote:
D:\Xyz.java:22: package com.sun.javadoc does not exist
import com.sun.javadoc.*;After getting this error, I have set my classpath to C:\Program Files\Java\jdk1.5.0_03\lib\tools.jar. But still the error persists. Could anyone please tell me how do I solve this problem.You have failed in setting your classpath in that case.

Build Question: error 7 occurred at source does not exist

I have VIs built in LabVIEW 6.1. It works and built well. In LabVIEW
7, It works well. But when I try to build it. I got error.
I first use the mass conpile to compile VIs and then build the exe
with default settings. I got:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted,
or the file path might be incorrectly formatted for the operating
system. For example, use \ as path separators on Windows, : on Mac OS,
and / on UNIX.
NI-488: Non-existent board.
But It does not point out which file does not exist.
Anyone can help me out?

Hello yqin,
Here are some more KnowledgeBases that may pertain to your issue.
Error 7 When Building Applications and DLLs That Use the LabVIEW Report Generation Toolkit
Why Do I Get Error 7 When Building an Executable from a Build Script?
Error 7 at Invoke Node When Building a LabVIEW Executable
If the above KnowledgeBases do not work, we will want to try the following procedure.
1. Open your Main VI.
2. Hold + a
nd click the run arrow (forces recompile).
3. Close the VI and mass compile it.
4. Keep the VI closed and build the application from scratch (do not use a script).
5. Ensure that all VIs called dynamically are included as support files before building.
Please let me know if you have any questions,
Matt
Keep up to date on the latest PXI news at twitter.com/pxi

Error 7 occurred at source does not exist

I have VIs written in LabVIEW 6.1 and works fine. I try to use LabVIEW 7 to build it. But I got error:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on UNIX.
NI-488: Non-existent board.
Application Builder: Error copying files.
It does not point out which file is not exsisted? Why?

Hello �
From your question, I understand that you are trying to build an executable for LabVIEW 7.0 of some VIs that were built in LabVIEW 6.1.
You need to save all the VIs and subVIs that will be contained in the executable (or DLL) in LabVIEW 7.0 first. For this, the only thing you need to do is to open them in LabVIEW 7.0 and re-save them. If you want to keep copies for both versions of LabVIEW, you could even create a different folder for the version 7.0 ones. When re-saving your VIs just go to File >> Save As and browse to the directory you just created.
Then, you will be able to build the executable for LabVIEW 7.0.
Another possible solution to the problem is what is mentioned in this 5F09C86256745006E4494?OpenDocument>Knowledgebase.
Hope this helps!
S Vences
Applications Engineer
National Instruments

Requested query does not exist on the current server.

Hi All,
I am facing a problem in BI 7.0 related to query view.I am able to create a view on a query and can successfully save it .But when I am trying to open it using Bex Analyzer, it throws an error that query does not exist on the current server.
Please find the steps below which I did to create a query view in BI 7.0.
1.Executed query and then clicked on save from the tool bar.It asks me to save as workbook or save as view.I clicked on save as view and gave some name to view.It saved successfully.
2.Now when in Bex I am trying to open the view , it gives the message 'The requested query does not exist on the current server'.
Please help me in solving the issue.
Regards,
Phani.

Hi,
I am facing the same problem, though some others of my views can be opened.
We had an upgrade of the system to Support Package stack 13. Maybe this caused problems.
My BEx Analyzer Version is:
Support Package 14, Patch 3, Revision 811
Philipp

Problem in WAD (The requested query / does not exist on the current server)

Dear Guru's
When i execute a Web Application in WAD in the selection screen suppose if i give Key product as 86000 then check and execute i get correct data. Then if i come to backpage (Selection screen again using backspace) and change Key product as 86022 then check and execute then i get following error
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Can any one please provide me some good solution...
We are using BI 7.0 sp 16, But i am executing this Wed Application in 3.1WAD.
Thanks and Regards,
kalyan

Dear Jai,
Issue is in WAD selection screen for first product valuse every thing if fine, when i go back and change product value and then CHECK and EXECUTE the following error comes.
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Any one have any idea plssssssssssssssssssssssssssssssssssss..........
dude's some soln.....
Thanks and Regards,
Dev
Edited by: Srinivas dev on Jul 4, 2008 2:45 PM

Error: Scope in your query does not exist...

Similar Messages

Maybe you are looking for