Error related to scheduling of dependencies in process chain

Hi gurus,
2 process chain is dependent on the 1 process chain,unfortunately i was scheduled the 2 pc before the end of 1 pc.
after a while i was realiased that 1 pc was still running,immediately i killed the job related to 2 pc(that job is  DELETE INDEXES )
finally i was rescheduled the 2 process chain after the completion of 1 process chain.
1 & 2 are finished successfully.
thx
mahi  &naren
because of this ,is there any problem to database (production server )

Mahesh,
   every body will cancel jobs. It won't problem. may be you are thinking in that process is DELETE INDEXES point of view, this won't be problem. create the indexes again. after the load check DB02 for missing indexes.
check the data consistency for the load(no duplicate recrods).
All the best.
Regards,
Nagesh Ganisetti.

Similar Messages

  • Relating a Request Number with its Process chain

    Hi experts!
    Do you know if there is anyway (with tables) of relating a "Request number" with its Process chain?
    Thank you very much in advance!

    Hello
    I guess there is no direct way, but you can get it by following:
    1) From table RSREQDONE, you can get infopak name by giving a request no.
    2) Then from table RSPCCHAIN, For Type = 'LOADING', VARIANTE field give the Infopackage name and it will give u the PC.
    Regards,
    Shashank

  • Run/Schedule HANA Procedure via Process Chain or Similar - BW on HANA

    Hello Experts,
    We have BW 7.4 on HANA database(rev 74). We are working on mixed scenario approach.
    We have few of the stored procedure in HANA. We want to schedule it.
    Is there any way to schedule it via BW process chain or any similar thing?
    Thanks in advance.
    Regards
    Rakesh

    Hi Rakesh,
    there is already a nice blog post which describes one way to integrate your stored procedures in a process chain: How to schedule SAP HANA procedures by using SAP BW Process Chains
    As Lars said. If you do not need the process chain integration you can use the XS Jobs: Scheduling XS Jobs - SAP HANA Developer Guide for SAP HANA Studio - SAP Library
    Best regards,
    Florian

  • Error when sending message(e-mail) from Process Chain ?

    Hello SDN s,
    How ya all ?
    I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
    The following is the Job Log Entries....
    30.06.2006 18:05:53 Job started                                                                          00        516         S    
    30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S    
    30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I    
    30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S    
    30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S    
    30.06.2006 18:06:01 Job finished                                                                        00        517         S    
    Thanks !!!
    Best Regards....
    Sankar Kumar
    +91 98403 47141

    Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                         Duration   Duration 
                             Completed  Error      In transit Waiting    In transit Waiting  
                                                                             hh:mm      hh:mm                                                                               
    B08(100)                        0          0          0          0                                                                               
    FAX Telefax              0          0          0          0       0:00       0:00
         5  INT Internet             0          0          0          0       0:00       0:00                                                                               
    SMTP              0          0          0                  0:00       0:00                                                                               
    X40 X.400                0          0          0          0       0:00       0:00
            RML R/Mail or            0          0          0          0       0:00       0:00
            PAG                      0          0          0          0       0:00       0:00
            PRT                      0          0          0          0       0:00       0:00
    So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
    could u give the steps to do that ? as i am the only one BW guy here !?
    Thanks !!!
    Best Regards....
    Sankar

  • Error in Step Copy Plan version in Process Chain

    Hi all,
    We have  step in Process Chain called 'Copy Plan version'.This stet is getting failed quite frequently. I just repeat it and the error is getting solved. I just wanted to know that is there any permanent solution for that. We cant afford to getting it failed that frequently.
    I dont have any idea about this step. Can you please provide me information about this step and a possible remedy aw well.
    The error messaage is :
    Selection accesses data that is currently locked; user     
    Job cancelled after system exception ERROR_MESSAGE.
    Please suggest.
    Regards
    sunny

    This is due to "Selection accesses data that is currently locked; user" , there is another process from another process chain which locked the object at the same time frame , so due to that this step is failing
    you can increase waittime 30mins(example)before this Step Copy Plan version executes in the process chain.
    OR, change the schedule time for this process chain

  • Error in execute planning sequence variant in process chain

    Hi ,
    While creating an Execute planning sequence variant in process chain in Quality system , i am getting an error" variable variant not selected ' though i created a variable variant and selected it in execute planning seq variant.
    Transporting it from development system didnt work therefore i am trying to create it directly in Quality .
    Any idea what could be the issue.

    Hi,
    Variable variant can be saved for planning sequence in modeler and then cab be used in process chains.
    In process chain you can choose "Execute planning sequence"( separate process type) and add planning sequence with variant.
    [http://help.sap.com/saphelp_nw2004s/helpdata/en/43/1d000c41130bd5e10000000a422035/frameset.htm]
    Thanks
    Pratyush

  • Error in Transport of ABAP Program in Process Chain

    Hi All,
    I am trying to transport a process chain that contains ABAP programs.
    I have transported the programs along with the other process chain variants
    There is an error that occurs when I transport - "Errors occurred during post-handling RS_AFTER_IMPORT for EVEN L" 
    The Process chain in the target system is fine except that I am not able to see the ABAP programs in the process chain.
    I am not able to locate the error.
    Your help will be appreciated
    Thanks,
    Shruti

    If a Process Variant (in this case; 'ABAP Program with success/failed' ) does not exist in the succeeding systems, it is very likely that this Process Variant has been created as a customized variant by a user. Unless the user transports this variant to further systems, this variant cannot be used in the process chain.
    Therefore it is better to use general Process Variants (those delivered by SAP) in the process chains. The General Variant here can be 'ABAP Program'.
    - Shruti Kulkarni

  • Which scheduled job to which process chain on SM37

    Hi all ,
    I'm checking scheduled jobs on SM37 screen. I see many BI_PROCESS_TRIGGER jobs scheduled and realesed . But I don't know  which process chain is the owner of these jobs. Does anyone knows how to check whic job belongs to which process chain ?
    Thanks in advance

    Hi,
    By using BI_PROCESS_TRIGGER job we can find the chain name..
    Below is the procedure..
    1.Double click on the job BI_PROCESS_TRIGGER
    2.Then goto "STEP"
    3. In "STEP"---goto 'GOTO' tab in the MENU....select "maiatain variants"
    Then it will take to SE38 screen---Click the DISPLAY
    It will give the Chain name and all the details.
    If u have any doubts plz let me know...
    i think this will clear...
    Mohan

  • Process dependencies in process chain

    Hi All,
    in one of my process chain i have at the end :
    delte index -> Load DTP -> Create index -> Compress cube ->generate db stats
    but system is showing this warning
    A type "Construct Database Statistics" process cannot follow process "Compression of the InfoCube"
    and in table RSPCTYPESDEP i an entry stating that :
    generate db stats after a compression of cube "makes no sense but not completely wrong".
    can you explain why generate db stats after compress make no sense ?
    Regards.

    Hi Anns,
    It is always recommended to keep the create DB stats before compression.The advantage of the DB stats is to improve the query performance as well as loading performance.
    check the below links for more information
    /thread/2026714 [original link is broken]
    http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/content.htm
    Regards,
    Venkatesh

  • Scheduling  a part of process chain

    Hi!
    I have a process chain that is a combination of local chains.
    The main chain is running daily, but now I want to run the latest local chain weekly only.
    Any hints how to get it working by this way?

    If you are on BI 7.0 and say if you want to run your local chain on a friday only then :-
    You can use a decision maker process type (process type is called as "Decision between multiple alternatives") and use a formulae with boolean return like
    "DATE_WEEKDAY1( Current Date ) = 5" inside this decison maker process to check whether the current day was a friday
    based on the output you would have multiple options i.e. to link the flow to your local chain in case of option 1 (value true being rturned by the boolean formulae) or option 2 (Value false being returned by the bollean formulae"

  • Error Messages when Transport Process Chain to Production

    I am able to transport three related process chain to Q, but failed in Prodtion. Can anyone look at my error messages? Thank you!
    Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC
    Version 'M' of chain USFCMD was saved without checking
    Results of check for process     in chain  :
    Results of check for process     in chain  :
    Results of check for process TRIGGER START_USLDFORECT_MD in chain USFCMD:
    Version 'M' of chain USLDFC was saved without checking
    Results of check for process     in chain  :
    Results of check for process     in chain  :
    Results of check for process TRIGGER START_USLDFORECT in chain USLDFC:
    Version 'M' of chain USLDFORECT was saved without checking
    Results of check for process     in chain  :
    Results of check for process     in chain  :
    Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
    Results of check for process ODSACTIVAT USDSOFC_ACTIVATE in chain USLDFORECT:
    Results of check for process TRIGGER START_USLDFORECT_TD in chain USLDFORECT:

    Try to transport the process chain by removing the process chain from schedule.
    Go to Process chain select execution in menu..go for option "Remove from schedule"
    It may help you.
    Regards,
    Srinivas.

  • Failure of infopackage step in process chain - Error in source system.

    Hello Experts,
    We are experiencing this during the execution of process chain.
    All the step for data loads within BW(DSO to DSO, DSO to cube) are failing with error -
    - Error in source system
    - Error during data selection
    Please note that we are 3.5 data flow and thus, data load within BW is through emulated data source and the infopackage. Steps running such  infopackages for emulated data source are failing in process chain with error above.
    Surprisingly, when I run the infopackage manually out of process chain it runs successful without any error. But when I run through process chain it fails.
    Any clue or suggestion? We have already tried doing re-initialization for infopackage.
    Appreciate your inputs.
    Regards,
    PK.

    Hi,
    When we run data loads thru process chain it will run in background. as per the available background application servers your request will be processed.
    as my your during your load time server will be on high load.
    please check your system busy schedule and schedule your process chains.
    Check Tx - SM50, if you have less application servers, then ask basis to create few more to application servers to process the request at busiest time.
    check about increasing parallel processing and default data transfer settings.
    go to info package---> menu scheduler--> data settings for default data transfer.
    Thanks

  • Infopackage in process chain is not scheduling

    Hi All
    One of infopackage in process chain is not scheduling and showing error message like "<b>Attributes are not yet maintained
    Entire chain now has status 'R'</b>     
    what do we mean about this
    can anyone will let me know in detail and how to correct this?
    Regards
    balaji

    Hi balaji,
    how big is your process chain ? I got a similar problem when I build a metachain with a lot of processes in the chain (more than 60). In this case, the error message is deceiving. If your process chain has similar numbers of processes, check OSS 942804 (Jobcount handling).
    Kind regards,
    Jürgen

  • Scheduling BW Process Chains options

    Hi All,
    I wonder if it is possible to schedule Process Chains via SCPS in the "Meta Chain or API" option (and not in the "Direct Scheduling" option, that seem used basically).
    It appears that the "Direct Scheduling" method need the Process chains to be activated after each transport, and then all the chains' jobs would be related to the account user that made the activation operation.
    I don't see anything that could be related to that kind of option among all the parameters of the RUN_BW_CHAIN.
    Can someone  help me on this ?
    Thanks in advance for your help !
    Regards,
    Yi Jiang

    Hi Yi,
    No you should be able to use it immediately (assuming you have the flag for "meta chain or api" scheduling already set).
    There will be a RSI_RUN_BW_CHAIN or SAP_ProcessChainRun (depending on your version) that allows you to run the process chain.
    You may want to import the process chains first, to populate the drop downs, but this is optional.
    Regards,
    Anton.

  • Error while transfer from DP to SNP in process chain

    Hello All,
    I am gettting a error message as below
    6875  characteristics combinations processed
    3606  characteristics combinations successfully saved
    0  characteristics combination not saved
    3269  characteristics combination contained errors
    and strangely when I repeat the process chain its actually comleted are the times series not attached?.
    Thanks in advance,
    Kumar

    Hi Kumar,
    Could you please elaborate on the error for the 3269 by looking
    at the job log.  Also check livecache connectivity was proper
    at the initial run
    Regards
    R. Senthil Mareeswaran.

Maybe you are looking for