Error returns when "Recover database"?

Hi all experts,
I am doing recover the database and get the following errors, I don't know what I have done wrong?
recover database;
Starting recover at 05-MAR-08
using channel ORA_DISK_1
starting media recovery
unable to find archive log
archive log thread=1 sequence=9
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 03/05/2008 17:19:37
RMAN-06054: media recovery requesting unknown log: thread 1 scn 1254920
Any ideas,
Fan

I have done what you said and get the followings:
ORA-00279: change 1254920 generated at 03/05/2008 14:11:26 needed for thread 1
ORA-00289: suggestion : /home/oracle/OraHome1/dbs/arch/1_9.dbf
ORA-00280: change 1254920 for thread 1 is in sequence #9
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log '/home/oracle/OraHome1/dbs/arch/1_9.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
It seems to be SCN 1254920 for thread 1 is in sequence #9 and the 1_9.dbf not found. I didn't delete any files in redo log arch directory. What if this possible happen?
I am really tired. Any ideas?
Fan

Similar Messages

The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting th

The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting the particular pattern.
The problem does not appear, if PH Elements 13 is executed in the administrator mode.
The available computer resources are rather large enough: CPU INTEL i7 4 cores, 16GB RAM, 1TB HDD + 32GB SSD, Windows 8.1.
Please, advice how to solve this problem? Maybe, there is patch or updating available?

Dear n_pane,
Thank you for the quick answer. In the meantime I found other way to pass by the problem. I increased the cache level up to the maximum value 8.
The errors reported as "No more virtual tiles can be allocated" vanish, but I still do not understand, why PSE 13 cannot work properly by the lower cache levels, having available maximum resources it needed (10443 MB RAM and 26.53GB SSD space for scratches), or cannot collaborate with the fast SSDs properly.
I wish you all the best in the New Year 2015!

SQL Server 2008 R2 { An Error occured when attaching database(s) }

Hello Guys!
I just installed SQL Server 2008 R2 a couple of days ago, on the first day use i can attach database(.mdf) with out any problem.
on the day 2, i keep getting this error:
http://img515.imageshack.us/img515/14/1212i.png
TITLE: Microsoft SQL Server Management Studio
An error occurred when attaching the database(s). Click the hyperlink in the Message column for details.
BUTTONS:
OK
after clicking the Hyperlink this window open:
http://img34.imageshack.us/img34/8766/hyperg.png
TITLE: Microsoft SQL Server Management Studio
Attach database failed for Server 'STARGAZER-PC\SQLSTARMAX'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600.1+((KJ_RTM).100402-1539+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Unable to open the physical file "E:\New folder\DataBase.MDF". Operating system error 5: "5(Access is denied.)". (Microsoft SQL Server, Error: 5120)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600&EvtSrc=MSSQLServer&EvtID=5120&LinkId=20476
BUTTONS:
OK
in that day i reinstall SQL Server 2008 R2, because I'm so confused. after that i try to attach i still got the same error, what i did is i share the folder where the database is.
i open SSMS and try to attach and i attached without any error...
i think this is the 4rth day, untill now everytime i want to attach a database i got this error, and even i try to share the folder where the database is i still got that error.
any advice guys?
Thanks a lot
jhules
if you want to be happy, find something you love to do and do it for free, then find someone to to you for it.

The Error clearly shows that MDF files and LDF files are not matching or LDF file is corrupted.
You can follow either of the one option below
1. Restore a recent backup rather attaching the MDF file
2. Attach single MDF file without LOG File( Warning: All the log transactions will be gone and new log file will be created)
EXEC sp_attach_single_file_db @dbname = 'AdventureWorks2008R2',
@physname = N'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Data\AdventureWorks2008R2_Data.mdf';
Thanks, Aditya Badramraju, _______________________________________________________ Please mark answered if your question is completely answered; vote it as helpful to help others find a solution quicker. This posting is provided AS IS with no warranties
and confers no rights. _______________________________________________________

Missing archived logs when recovering database

Scenario is
1-10 archived logs required to recover database.
5 Number log is missing
It means that 6,7,8,9,10 are useless for me
yes/no Please explain it to me
Thanks a Lot

Hi,
Yes all archivelog after the missing sequence of archivelog will be useless for recovery.
in ur case 6,7,8,9,10 are useless for you.
So only incomplete recovery is the solution.
Thanks
Kuljeet Pal Singh

TNS-12666 error occures when using database link

When I am trying to use database link
defined in my database the following error occures:
TNS-12666 Dedicated server: outbound transport protocol different from inbound.
In documentation is stated to resolve such an error to
specify the same protocol in the SQL*Net connect string or alias for the outbound connection as that used for the inbound connection.
I have in tnsnames.ora defined network service name
by which I can connect to such a database by SQL*Plus
without any problems, why can I not do such a thing
via database link?
Thanks a lot for advise, ...

Could you change the following entry in your 'sqlnet.ora' file and try?
SQLNET.AUTHENTICATION_SERVICES = (NONE)

ORA-01406 error encountered when using database link

I am moving data between two different databases using a database link on Oracle 8.1.5. The database statement looks like:
insert into TABLE@DATABASELINK
(COLUMNS)
select (COLUMNS) from TABLE
One of the database columns is defined as varchar2(4000) on both the source and target database tables. When the data in this column on the source database is greater than 2000 characters, the database query generates the message:
ORA-01406: fetched column value was truncated
I have verified that the target column is defined as varchar2(4000), and have also verified that it is this varchar2(4000) column that is causing the problem. I have also tested out that this error only occurs when the varchar field is more than 2000 characters; if I remove characters so that the source field is less than or equal to 2000 characters, this error is no longer generated and the data is inserted to the target database table.
Is this a limit with database links or some other database parameter that is not set up correctly?
Thanks...Theresa Tucci

Could you change the following entry in your 'sqlnet.ora' file and try?
SQLNET.AUTHENTICATION_SERVICES = (NONE)

3.1.2 no Baseband and error 1013 when recovering iPhone3GS

Hi. I'm having this strange problem that it actually seems like im the only guy with a 3GS that have ever had that problem.
well here it goes, i have my lovely iphone 3GS with firmware 3.1.2 but it crashed earlier yesterday when i tried to restore my device in order to have it fully reset, i now really regret i didn't just use the delete all and reset function in the iphone.
But i've been unable to restore my device until i after several restarts of the pc and both trying to restore in DFU and recover mode it finally happened that myiphone got detected.
But when i then try to update it with the stock 3.1.2 it goes fine until it reaches the point where the baseband is installed, it keep pinging but nothing happens, and after a quite while Itunes end up saying the error 1013.
The only possible way to get it to the screen is by jailbreaking the device and that still doesn't help me since no one have ever posted about it on the internet.
And just the make sure that you doesn't suggest or ask about this, i can't install any Firmware that is not directly from Apple since it just says that my iphone is not elligible to that software.
the main thing that is wrong is the fact that i don't have any; Network, Carrier, Wi-Fi adress, Bluetooth, IMEI, ICCID nor Modem Firmware, they are either blank or just showing up like N/A and the bluetooth with a adress like 00:00:00
Here's a log of the Update
http://rapidshare.com/files/314326770/iPhoneUpdater.log.html

i can see why you think its related to jailbreaking because i say the stock 3.1.2 which means i've been trying to use a version not downloaded by itunes itself but saved to a known direction and then tried to update it with the windows+recover method.
it wasn't jailbreaked until i started seeking any possible way to fix it
since Apple seriously fail at their support site i don't get any help from that site you reffered to, i've tried every solution but still not a thing have been changed.
EDIT: by failing i mean that the site is refering to a lot of error messages but it doesn't tell how to solve a specific error.
Message was edited by: ZulzZ

Error Messages when Checking Database via dbacockpit

Hi,
I got the below messages when I tried to exe a "Check Database" job. What could be wrong ? Please advise. TIA !
SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN returned rc_cannot_get_rfc_dests
Message no. BT351
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 901
Message no. BT351
SXPG_COMMAND_EXECUTE failed for BRARCHIVE - Reason: x_error
Message no. Q2233
Diagnosis
This message includes variables. No additional information can be specified.
Job cancelled after system exception ERROR_MESSAGE
Message no. 00564
DL

Hai,
Are you trying to execute the job in a remote server, if yes check the RFC connection which it uses to connect.
Provide the SAP Gateway details for that RFC connection and then try.
Regards,
Yoganand.V

"Error: null" when compiling database adapter project...

Hello...
I started to work trough the Order Booking Tutorial...
In the end there is a Database Adapter. When i follow this tutorial step by step... I got a "Error: null" at the end when compile and deploy this project...
What das "Error: null" mean? In this relation...
Connection to database is configured correctly..
Thanks for any reply..

Thanks a lot for fast answer...
I do so, and i just run through the tutorial again... Now it works...
Everything I changed except of restart jdev I change the line ( Oracle_Home\integration\orabpel\system\appserver\oc4j\j2ee\home\application-deployments\default\DbAdapter\oc4j-ra.xml )
<config-property name="platformClassName" value="oracle.toplink.internal.databaseaccess.OraclePlatform"/>
to
<config-property name="platformClassName" value="oracle.toplink.internal.databaseaccess.DatabasePlatform"/>
What does this line represent...?! So what is the platformClassName...
Thanks a lot...
Message was edited by:
Optimizer

ERROR :0003 when recovering

Hello Guys
I hope someone can help! I have X870 and the original hard drive broke (loud clicking, really slow system).
I have put in to the computer a new 750GB HDD and new 128GB SSD.
I have the offical recovery DVD's and when i run the first disk it proceeds to system recovery menu, i tell it to begin and it starts to process the job.
The bar moves to 100% after a few mins and then the "Error: 0003" messages comes up.
It does not matter which hard drive i use in which of the two slots nor does it change when i use only one of the disks in the computer at a time.
Both disks appear fine as i tested them in other computers and tried hardware diagnostic tests as well!
Anyone got any ideas? Any helped appreciated!
Thanks.
G.

Always give us your full model number, and its part number when posting here. Something like model number: Qosmio X870-BG2T23; part number: PSPLXU-02M019, look on the Toshiba label on the bottom.
Mike

Unit missing or error returned when Project Explorer open

Hi,
I found out strange behaviour when I open VI from Project Explorer, and I don't know why is this happening.
It can be tested with files in attached archive.
When I open UnitMissingTest.vi directly from directory (Project Explorer is not opened) and run it, everything is ok,
but when I open Project Explorer first, then UnitMissingTest.vi and run it, there is no unit in waveform attributes or I get this error "Error -200378 occurred at Property Node DAQmx Scale (arg 2) in DAQmx Create Scale (Linear).vi:1->UnitMissingTest.vi", "Possible reason(s): Custom scale specified does not exist."
Can anyone help me with this?
Thanks,
andrej
Attachments:
Unit missing when project open.zip ‏15 KB

Hello Andrej,
Thank you for posting example code that succintly reproduced the issue. I took a look at your code and saw the same behavior of the unit name being blank with the project explorer open. The workaround that I found was creating a DAQmx scale in the project and using that in the VI. I have altered the VI and the project. Please confirm that this works on your end. I think what might be happening is that LabVIEW is looking at the project for a custom scale and then mistakenly disregarding the scale you have in the VI.
Have a great weekend,
NathanT
Attachments:
Unit No Longer Missing.zip ‏20 KB

Error message when recovering

Note: EliteBook 8460p
OS: Original W7 Profesional
Error message: Windows failed to start.
I am trying to restore to factory settings my note but when pressing F11 when booting my machine it either goes to Windows or display the messages shown below, when choosing "Enter" it goes to another screen allowing me to boot Windows .
The recovery partition is present on my machine

I found a reference to a reference to a possible problem here and I applied this patch but it didn't change a thing.
The log, shown below, appears to have found my system all right "Found WIM. No need to do anything."
Still F11 not working
Mounting HP_RECOVERY at C:\Users\JEANLU~1\AppData\Local\Temp\f11patchmount
Executing (\\KALGOORLIE\ROOT\CIMV2:Win32_Volume.DeviceID="\\\\?\\Volume{df649fe3-ffc6-11e0-9cb8-402cf413e21d}\\")->AddMountPoint()
Method execution successful.
Out Parameters:
instance of __PARAMETERS
ReturnValue = 0;
Getting architecture we are running under...
Running under 64-bit
Found WIM. No need to do anything.
Executing (\\KALGOORLIE\ROOT\CIMV2:Win32_Volume.DeviceID="\\\\?\\Volume{df649fe3-ffc6-11e0-9cb8-402cf413e21d}\\")->Dismount()
Method execution successful.
Out Parameters:
instance of __PARAMETERS
ReturnValue = 4;
Finished running the patch.

Error when recovering a database in a new server

Hi folks,
I took a full RMAN backup from a Windows Server 2003 32bit and tried to restore it in a new server (Windows Server 2003 64bit). The restore was apparently ok, but when recovering, I got this error:
archived log for thread 1 with sequence 0 is already on disk as file /u01/app/oracle/oradata/GIEVOTE2/redo01.log
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u01/app/oracle/oradata/GIEVOTE2/system01.dbf'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 06/15/2010 14:04:59
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 1041 and starting SCN of 1745356128 found to restore
I tried to recover using backup controlfile until cancel but same error. I don't need to apply any archivelog as it is a testing env.
Info:
Oracle Server: 10g R1 (10.1.0.4)
DB Type: Single Instance
Thanks in advance,

You do not show your rman script, but if you are restoring to another server, you will need to do an incomplete recovery
This will require a 'set until' parameter.
eg:
run {
set until sequence xxx thread 1;
allocate channel dev1 type disk;
recover database;
sql 'alter database open resetlogs';
or
run {
set until time "to_date( '22-03-2010 10:00:00', 'DD-MM-RRRR HH24:MI:SS')";
allocate channel dev1 type disk;
recover database;
sql 'alter database open resetlogs';
If you do not use this it will keep requesting logs until it finds the end of thread marker (EOT) in a log, which occurs when the database is shutdown, and this will be a complete recovery

Error returned in Acrobat X Pro when attempting to output pdf full text from Proquest database.

Contacted Proquest and they said to contact Adobe. Recently installed CS5, so I now have newer Acrobat version from before. This newer version isn't playing well. Can anyone help?
This is my original plea to Proquest:
Description:
Recently had Adobe Creative Suite (CS5) installed on my machine. Now when I attempt to download full text pdf I receive an error message when trying to open the downloaded file. "There was an error opening this document. The file is damaged and could not be repaired."
I can view pdf within Proquest window, but problems occur when I try to open the download - defaults to Acrobat X Pro, not standard Reader. I also get an error message when trying to email it. The only outputting method that seems to work is the Export/Save option.
I tried on another machine that uses Acrobat Reader XI and all worked fine.
BTW - I am working in Firefox.
Thanks in advance for any assistance.

Here are some screenshots:

Error when starting database

SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jan 19 20:21:21 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> SQL> Connected.
SQL> SQL> alter database open resetlogs
ERROR at line 1:
ORA-01190: control file or data file 1 is from before the last RESETLOGS
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF'
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options

Hi,
ORA-01190: control file or data file string is from before the last RESETLOGS
Cause: Attempting to use a data file when the log reset information in the file does not match the control file. Either the data file or the control file is a backup that was made before the most recent ALTER DATABASE OPEN RESETLOGS.
Action: Restore file from a more recent backup.
In fact, if I'm not wrong, when you tried to open the database with "resetlogs" clause, it seems that the information kept in this control file points to datafiles checkpoints information that are older than the most recent resetlogs currently recorded in this control file. Have you tryied issue a recover database using backup controlfile?
Cheers
Legatti

Error returns when "Recover database"?

Similar Messages

Maybe you are looking for