Error RSTRAN525 while activating transformation
Hi,
In my transformation one date field get updated using three source field (date, GR Process time, Plant) and logic written in routine is Result = date + GR Process time.
GR Process time (source field WEBAZ) mapped with info object 0GR_PR_TIME.
While check/activation of transformation following error comes.
"Rule 17 (target field: ZCALFDAT, group: 02 Standard Group): InfoObject properties 0GR_PR_TIME
Message no. RSTRAN525
Diagnosis
The properties of the InfoObject selected, 0GR_PR_TIME, do not match the properties of the available source field.
System Response
Check that you have chosen the correct InfoObject.
Procedure
If necessary, choose a different InfoObject."
Kindly help.
Regards,
Manish
Source field WEBAZ - Goods receipt processing time in days
Data Type DEC Counter or amount field with comma and sign
Length 3 Decimal Places 0
Target Infoobject (Key figure) : 0GR_PR_TIME - Goods receipt processing time in days
Number, DEC Counter or amount field with comma and sign
Similar Messages
-
Getting Error ASSERTION_FAILED while activating transformation.
Hi Experts,
I am getting an error "The ASSERT condition was violated" while activating a transformation in BI. I applied SAP NOTE 1137447 and I am still getting this error given below.
Runtime Errors ASSERTION_FAILED
Date and Time 09.10.2009 16:53:20
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
Trigger Location of Runtime Error
Program CL_RSTRAN_FOBU_APPL===========CP
Include CL_RSTRAN_FOBU_APPL===========CM007
Row 37
Module type (METHOD)
Module Name GET_CODE
Line SourceCde
7 l_formula_id_32 TYPE sfbeid,
8 l_s_fobu TYPE rsfob_s_formula,
9 l_r_formula TYPE REF TO cl_foev_formula.
10
11
12 IF p_r_formula IS BOUND AND
13 p_mode is not initial.
14 CALL METHOD cl_rsar_formulas=>reset_formula_foev_object
15 EXPORTING
16 i_formex = p_formex
17 i_objvers = p_objvers
18 i_r_formula = p_r_formula
19 EXCEPTIONS
20 no_entry = 1
21 invalid = 2
22 OTHERS = 3.
23 ASSERT sy-subrc = 0. "invalid call
24
25 ENDIF.
26
27 CALL METHOD cl_rsar_formulas=>get_formula_foev_object
28 EXPORTING
29 i_formex = p_formex
30 i_objvers = p_objvers
31 RECEIVING
32 r_r_formula = l_r_formula
33 EXCEPTIONS
34 no_entry = 1
35 invalid = 2
36 OTHERS = 3.
>>>>> ASSERT sy-subrc = 0. "invalid call
38
39
40 l_r_formula->compile( EXPORTING i_structure_prefix = 'SOURCE_FIELDS'
41 IMPORTING e_abap_formula = e_t_abap_source ).
42
43 ENDMETHOD.
Kindly help me.
Thanks in advance,
With Kind Regards,
Kannan JagadeesanTry applying the following OSS Notes:
[OSS Note 1050275 - ASSERTION_FAILED in CL_RSTRAN_FOBU_APPL->GET_CODE|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1050275] (relevant to prior to BI 7 SP14)
[OSS Note 1115923 - Check or transfer of empty formulas causes runtime error|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1115923] (relevant to prior to BI 7 SP17). -
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Error while activating Transformations
Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.Hi,
Map it with required Unit filed from your Source .
Mayank -
Error while activating transformation
Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
Message Number. RSAA561
2. Error while activating transformation
Message Number. RSTRAN510
3. Error activating transformation.
Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh KaranMight be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay -
Error while activating Transformation CO_OM_WBS_3
Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
SunderDear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM -
Error while activating transformation in BI 7.0
HI,
Error: Error while activating transformation.
Does anyone know how to solve this.
SheelaHi,
There may be many issues like:
If you have any routines, check the syntax.
Check all the fields are mapped properly or not.
Check any currency or unit conversion in transformation.
Data type mismatch -> make sure source and target infoobject either numerical or interconvertible.
Length mismatch between source and target infoobject.
Rgs,
I.R.K -
Error while activating transformations? can you please help me
Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
SrinathHi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani.. -
While activating Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting error
Dear all
While activating the Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting the following error
Error when writing routines
Message no. RSAA561
Error while activating transformation
Message no. RSTRAN510
Error when activating Transformation 0N7SM4TBBDTRG1KKDKS3QRMWAHMV490Q
Message no. RSO404
plz guide me seniors
Regards,
SunderHi,
Make sure your routines are syntatically correct in the transformation before activation.
still it is giving the same error please elaborate the issue and post it over here.
Thanks
Suresh -
Start routine errors while activating transformations 2LIS_13_VDITM
Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PMThanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
SOURCE_PACKAGE
CHANGING
l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek -
Syntax Error in Routine while Activating Transformation
Dear All,
I am activating whole scenario for 0SD_C03. we have made transformation for 2lis_11_vaitm, during installation we get below errors:
- Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
-Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
-Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
I really appreciate your any input for this.
Thanks & Regards,
DarshanHi,
I hope there is inbalance in between SOURCE Datapackage and Target Datapackage. So in the start routines pls check it and it not found then add in DATA_PACKAGE...
Check with ABAPer
under ,
TYPES:
BEGIN OF tys_TG_1_full,
SUBTOT_1S TYPE /BI0/OISUBTOT_1S,
and also you can fin dsimilar kind of threads in SDN.
Re: Syntax Error in Routine while Activating Transformation
Re: Issue while creating Transformation from Update rule.
Re: 0IC_C03 activation of Transformation rule ends with ERROR
Re: Error in activation of transformation
Thanks
Reddy -
Error occurs while activating a 'Write Optimized' DSO.
I am getting error " There is no PSA for infosource 'XXXX' and source system 'XXX' while activating a newly defined DSO object.
I am able to activate a Standard DSOs, however the error occurs while activating a 'Write Optimized' DSOHi,
For write optimised DSO, check if you have tick the uniqueness of the records. If you check that and if there are two same records coming from source in one go, then you will get error
From SAP help
You can specify that you do not want to run a check to ensure that the data is unique. If you do not check the uniqueness of the data, the DataStore object table may contain several records with the same key. If you do not set this indicator, and you do check the uniqueness of the data, the system generates a unique index in the semantic key of the InfoObject. This index has the technical name "KEY". Since write-optimized DataStore objects do not have a change log, the system does not create delta (in the sense of a before image and an after image). When you update data into the connected InfoProviders, the system only updates the requests that have not yet been posted.
Thanks
Srikanth -
Error message while activating ODS ZFI_ORD( FI Order Details)
hi ,
I am getting this error message while activating the ODS ZFI_ORD( FI Order Details) "Value '1 - Hide = 2 Neck' (hex. '2000200020002000310020002D002000480069006400650020') of characteristic ZORD_DESC contains invalid characters
" . I am not able to get in which record the problem is and the message is not clear for records. How to check it.
Thanks,
PoojaHi
Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
Data Target Request can be Deleted by making it Red. Edit at PSA
/people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 "Allowed characters in the BW System"
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Hope it helps and clear -
Messages "An error occurred while activating. Try again later"
Hi
have an iMac (2,5 GHz Intel Core i5, 4GB 1333 MHz DDR3 latest OS 10.9.4) and I keep getting errors while logging in to messages
- I can send and receive imessages on my iPhone and iPad with no problems
- my apple ID is verified
- I don't have modified the "hosts" file
- My time is set on "automaticly set time and date"
- When mountain lion came out, I had no problem what so ever
- I erased my HDD and did a clean instal. The first thing I did was start imessage and log in.. same error
- I tried another apple ID (from my mom) and that didn't word either
- I changed my password and tried again
- I searched the ports and opened them on my router
- I reseted my icloud keychain
- I searched on the internet and tried everything I could find.
Can anyone help me? There was a time that I could use messages with no problem at all, but like a year ago, I kept getting this error.
Thank you kindly
translated from dutch to english: "An error occurred while activating. Try again later"This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reinstall OS X.
Step 14
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. -
Error in routine while activating transformation
Dear all,
While activating 2LIS_04_P_ARBPL Transformation activation , I am facing following error while checking in Routine
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"
statement.
I replaced COMM_STRUCTURE with SOURCE_FIELDS as suggested in on eof the forum as its field level routine.
Then I got the error as :
*E:Field "SOURCE_FIELDS" is unknown. It is neither in one of the
tables nor defined by a "DATA" statement. "DATA" statement.*
please help me out for thisWhere are you writing this Routine?
Start Routine or Field Routine?
Start Routine:
You cannot use SOURCE_FIELDS. You will have to use SOURCE_PACKAGE.
SOURCE_PACKAGE does not have a header line, so you cannot use it directly.
You can just use commands like Sort SOURCE_PACKAGE or Delete SOURCE_PACKAGE.
Field Routine:
You can use SOURCE_FIELDS.
Check if you have selected the field as your source field while writing the field routine.
Please let us know where you are facing the error.
Edited by: Vishal Sanghvi on Jun 2, 2011 2:04 PM
Maybe you are looking for
-
What does this error mean? Error in File C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\REPORTING-01.reportjobserver\~tmp814595033916516.rpt: Failed to retrieve data from the database. Details: [Database Vendor Code:
-
What are smart mailboxes and why do i need both smart and "normal" ones?
What are smart mailboxes and why do I need both smart and "normal" mailboxes?
-
Hi, Currently I am doing Back to Back Order Cycle. I have facing the below two issues 1.The order Line STATUS does not change to PO-ReqRequested, when I run Create Supply Order Eligible Process[when the status is Supply Eligible]. There r no errors i
-
Java sp 2-way SSL authentication
I've written a java stored proc that uses JSSE to implement an HTTPS client to a partner's server. In the past, this strategy has worked well, and we have several successful projects under our belts. This time, the partner's server is configured for
-
CreativeCloud Home Tab Does Not Load
My application manager was just updated to Creative Cloud. When I login the Home tab just has a endless spinning wheel. All other tabs work. Any idea how to fix this? I already tired a uninstall and reinstall plus the I deleted the opm.db file. Also,