Error--Several deliveries were generated unable to find delivery numbers
when multiple deliveries are created for the same Sales Order,
we get the message V1 - 856 "Sales Order XXXXXX is SAVED (Several deliveries were generated)..
Can we display the individual delivery numbers instead of this.. message V1-260 "Sales Order XXXXXX is SAVED (Delivery YXXXXXXX is created)" ??
So it is possible to display something like
"Sales Order XXXXXX is SAVED (Delivery Number first & Second were created)" ??
Hi
I think its standard message, check where this message is triggering with help of ABAPer and try to modfiy.
Similar Messages
-
Base station error, air port utility was unable to find my airport device. Why does it say this when it recognizes my airport on the computer? Yellow light has been on
On the older version of the AE you can still use older airport utility.
But once you load the new one you cannot easily go back.. you can load an older 5.6 version though.. instructions below.
For 6.3 you need to run ipv6 local link.
see http://support.apple.com/kb/TS4597
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so. -
How to find Delivery numbers for a range of Material Documents
Hi,
Could anybody please let me know how to find the delivery numbers from a range of material documents based on a given delivery date.
Regards
KasiHi,
there is an index table for deliveries by material:
VLPMA
Select the delivery numers using the material range from VLPMA.
Regards,
Clemens -
Reg Unable to find URL for Adapter Engine Error
Hello,
During execution of a scenario, i am getting these errors in sxmb_moni:
AE_DETAILS_GET_ERROR
3: Unable to find URL for Adapter Engine af.xip.poecspxioo4
Error when reading the access data (URL, user, password) for the Adapter Engine.
Seems like it is a problem of XI Server unable to locate the Central adapter engine due to some parameter not set properly.
So, what are the points we can check while installation of XI so as to rectify this problem.Hi all,
I got the similar error in my scenario and i solved the same.Actually i ma not pretty surte this will solve your problem.
In my case proxy generation settings was mis configured in the sender system. so its caused the reason.
I made an entry in the SPROXSET table and i did other activities like RFC and application system also.
Then its worked for me. Its not matching with your case please do ignore this one
Regards
Vijay -
Error - Unable to find the cube in catalog in Webi Report
Hi All,
We have a WEBI report built on SAP BW OLAP universe. The report is accessible from a user who has SAP_ALL authorization. However, a User role created to access and refresh the same report is giving the error message as below.
'' Unable to find cube <Multiprovider> in catalog $INFOCUBE (WIS10901)''
I have added the authorization object for BW workbench object Multiprovider and provided authorization. The same was tested in BW environment as well. However, the report could not be refreshed in BO WEBI.
SAP BW 7.01 and BO XI3.1.
Anybody who can help me on this? It could be that some authorizations are missing . But not sure how to trace what are missing.
Thanks and Regards
SrinivasTry searching for the InfoProvider/query in the transaction MDXTEST with the test user, you could get more detailed error messages there.
Here you will find how to activate traces on the BO side:
FEATURED EVENTS
But frankly speaking, I think BW traces will be more accurate in your case. -
'unable to find product oracle.swd.jre[1.3.1,1.6] in Oracle Inventory'
Hi All,
i am running the runInstaller for patch set 9.2.0.8 on AIX 5L Based Systems (64-Bit)
after selecting the products.xml file and selecting the oracle home to update and then cllick Install
i get the error 'unable to find product oracle.swd.jre[1.3.1,1.6] in Oracle Inventory'
is it the issue of the version of oracle.swd.jre? can we skip the installation of this componenet?
Kindly suggest
Thanks
SKHi,
Please see if these documents help.
Note: 397745.1 - Error when installing Patch 2376472: "Unable to find product oracle.swd.jre "
Note: 315842.1 - 'unable to find product oracle.swd.jre' Error During Agent Upgrade from 10.1.0.3 to 10.1.0.4
Regards,
Hussein -
[Oracle workflow 2.6.3] unable to find product oracle.swd.jre[1.4.0, 1.4.4]
I want to install Oracle workflow 2.6.3 on my server, but i get the following error while installing the program.
unable to find product oracle.swd.jre 1.4.0, 1.4.4
Below the step i took:
I selected the oracle_home and the path where my db has been installed. Then next... and the universal installer gives me that error. I can choose to continue or to go back. I tried to continue and oracle worflow has been succesfull installed. bet when to try to run the workflow manager. I get the following result:
C:\oracle\product\10.2.0\db_1\wf\install>set JAVA_HOME=
C:\oracle\product\10.2.0\db_1\wf\install>"\bin\java" -classpath ";C:\oracle\prod
uct\10.2.0\db_1\wf\java;\lib\rt.jar;\lib\i18n.jar;C:\oracle\product\10.2.0\db_1\
wf\install\WorkflowCA.jar;C:\oracle\product\10.2.0\db_1\jlib\ewt3.jar;C:\oracle\
product\10.2.0\db_1\jlib\ewt3-nls.jar;C:\oracle\product\10.2.0\db_1\jlib\share.j
ar;C:\oracle\product\10.2.0\db_1\jlib\swingall-1_1_1.jar;C:\oracle\product\10.2.
0\db_1\jlib\fndctx.jar;C:\oracle\product\10.2.0\db_1\jlib\wfjava.jar;C:\oracle\p
roduct\10.2.0\db_1\jlib\wfapi.jar;C:\oracle\product\10.2.0\db_1\jdbc\lib\classes
12.jar;C:\oracle\product\10.2.0\db_1\sysman\jlib\emd.jar;C:\oracle\product\10.2.
0\db_1\jlib\emConfigInstall.jar;" oracle.apps.fnd.wf.install.db.WorkflowCA /wfdi
r "C:\oracle\product\10.2.0\db_1\wf" /orahome "C:\oracle\product\10.2.0\db_1" /
wintz "W. Europe Daylight Time" /systemroot "C:\WINDOWS" /ospath "C:\OraHome_2\
bin;C:\oracle\product\10.2.0\db_1\bin;C:\OraHome_1\bin;C:\OraHome_1\jre\1.4.2\bi
n\client;C:\OraHome_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Sy
stem32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;C:\Program Files
\Support Tools\;"C:\Program Files\Symantec\Norton Ghost 2003\";C:\Program Files\
QuickTime\QTSystem\;C:\Program Files\Common Files\Nero\Lib\;C:\Program Files\Com
mon Files\Nero\Lib\;C:\Program Files\Common Files\Nero\Lib\;C:\Program Files\Com
mon Files\Nero\Lib\;C:\Program Files\Common Files\Nero\Lib\;C:\Program Files\Com
mon Files\Nero\Lib\;C:\Program Files\Common Files\Nero\Lib\;C:\Program Files\Com
mon Files\Nero\Lib\"
The system cannot find the path specified.
Anyone an idea to resolve it...
tnx in advanced....
Edited by: user565199 on 15-jan-2009 3:33
Edited by: user565199 on 15-jan-2009 3:52sorry maybe a noob question but does it means io have to install the whole db again?I don't know. Try to install OWF 2.6.4 and maybe it upgarde all compnents from OWF 2.6.3
Are can you choose to install the workflow server only. When i start the install file with the universal installer i can only choose forYou need additional Oracle Database Companion CD, for link look at this message
(from thread which I provided in prev. post)
Re: Create Process Flow
Regards,
Oleg -
Unable to find a WSDL that has a definition for service name
Hello,
I have a wsdl shared in mds and a composite with a bpel process that consumes that wsdl, but when that happens I get the following error:
oracle.fabric.common.FabricInvocationException: Unable to find the WSDL service defined for service name {http://directvla.com/schema/businessdomain/ServiceConfigurationRules/v1-0}ServiceConfigurationRules_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace and service name in the #wsdl.endpoint element. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate any HTTP proxy settings for the server.
I checked the composite, the wsdl and the endpoint and everything is ok. At the momment to avoid the error, the wsdl is local, but this is not a real solution, what I really need is to make it work with the mds.
Can somebody help me?
Thank for advance.Hi,
here is my wsdl:
<definitions
targetNamespace="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:commondt-v1-0="http://xxxxxx.com/schema/util/commondatatypes/v1-0"
xmlns:ns1="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:ServiceConfigurationRules-v1-0="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0" xmlns:tns="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:commonex-v1-0="http://xxxxxx.com/schema/util/commonexceptions/v1-0"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
<types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:commondt-v1-0="http://xxxxxx.com/schema/util/commondatatypes/v1-0" xmlns:ns1="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:ServiceConfigurationRules-v1-0="http://oracle.com/sca/soapservice/XXXXBusinessRule/ServiceConfigurationRules/ServiceConfigurationRules" xmlns:tns="http://oracle.com/sca/soapservice/XXXXBusinessRule/ServiceConfigurationRules/ServiceConfigurationRules"
xmlns:commonex-v1-0="http://xxxxxx.com/schema/util/commonexceptions/v1-0"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
<xsd:import namespace="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/parameters" schemaLocation="oramds:/apps/schemas/RESB/RulesParmsInput_2.xsd"/>
</xsd:schema>
</types>
<message name="ServiceActivationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationRequest"/>
</message>
<message name="ServiceActivationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationResponse"/>
</message>
<message name="ServiceActivationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ServiceActivationException"/>
</message>
<message name="GetAddActivationConfigurationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationRequest"/>
</message>
<message name="GetAddActivationConfigurationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationResponse"/>
</message>
<message name="GetAddActivationConfigurationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</message>
<message name="ResourceChangeMigrationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationRequest"/>
</message>
<message name="ResourceChangeMigrationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationResponse"/>
</message>
<message name="ResourceChangeMigrationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationException"/>
</message>
<message name="ResourceChangeMigrationUpgradeRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeRequest"/>
</message>
<message name="ResourceChangeMigrationUpgradeResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeResponse"/>
</message>
<message name="ResourceChangeMigrationUpgradeException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeException"/>
</message>
<message name="GetServiceConfigurationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</message>
<message name="GetAntenaSenialRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAntenaSenialRequest"/>
</message>
<message name="GetAntenaSenialResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAntenaSenialResponse"/>
</message>
<message name="GetAntenaSenialException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</message>
<message name="OrderPayPerViewRuleRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleRequest"/>
</message>
<message name="OrderPayPerViewRuleResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleResponse"/>
</message>
<message name="OrderPayPerViewRuleException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleException"/>
</message>
<message name="GetOperationForWOServiceTypeRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeRequest"/>
</message>
<message name="GetOperationForWOServiceTypeResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeResponse"/>
</message>
<message name="GetOperationForWOServiceTypeException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeException"/>
</message>
<message name="CompareResourceTechnologyRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyRequest"/>
</message>
<message name="CompareResourceTechnologyResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyResponse"/>
</message>
<message name="CompareResourceTechnologyException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:CompareResourceTechnologyException"/>
</message>
<message name="GetBasicProductMigrationRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationRequest"/>
</message>
<message name="GetBasicProductMigrationResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationResponse"/>
</message>
<message name="GetBasicProductMigrationException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetBasicProductMigrationException"/>
</message>
<message name="GetMaxResourcesForCustomerRequest">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerRequest"/>
</message>
<message name="GetMaxResourcesForCustomerResponse">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerResponse"/>
</message>
<message name="GetMaxResourcesForCustomerException">
<part name="parameter" element="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerException"/>
</message>
<portType name="ServiceConfigurationRules_pt">
<operation name="GetAddActivationConfiguration">
<input message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationResponse"/>
<fault name="GetAddActivationConfigurationException" message="ServiceConfigurationRules-v1-0:GetAddActivationConfigurationException"/>
</operation>
<operation name="ResourceChangeMigration">
<input message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationRequest"/>
<output message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationResponse"/>
<fault name="ResourceChangeMigrationException" message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationException"/>
</operation>
<operation name="ResourceChangeMigrationUpgrade">
<input message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeRequest"/>
<output message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeResponse"/>
<fault name="ResourceChangeMigrationUpgradeException" message="ServiceConfigurationRules-v1-0:ResourceChangeMigrationUpgradeException"/>
</operation>
<operation name="GetAntenaSenial">
<input message="ServiceConfigurationRules-v1-0:GetAntenaSenialRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetAntenaSenialResponse"/>
<fault name="GetReasonResponseException" message="ServiceConfigurationRules-v1-0:GetAntenaSenialException"/>
</operation>
<operation name="OrderPayPerViewRule">
<input message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleRequest"/>
<output message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleResponse"/>
<fault name="OrderPayPerViewRuleException" message="ServiceConfigurationRules-v1-0:OrderPayPerViewRuleException"/>
</operation>
<operation name="GetServiceActivation">
<input message="ServiceConfigurationRules-v1-0:ServiceActivationRequest"/>
<output message="ServiceConfigurationRules-v1-0:ServiceActivationResponse"/>
<fault name="ServiceActivationException" message="ServiceConfigurationRules-v1-0:ServiceActivationException"/>
</operation>
<operation name="GetOperationForWOServiceType">
<input message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeResponse"/>
<fault message="ServiceConfigurationRules-v1-0:GetOperationForWOServiceTypeException" name="GetOperationForWOServiceTypeException"/>
</operation>
<operation name="GetMaxResourcesForCustomer">
<input message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerResponse"/>
<fault message="ServiceConfigurationRules-v1-0:GetMaxResourcesForCustomerException" name="GetMaxResourcesForCustomerException"/>
</operation>
<operation name="GetBasicProductMigration">
<input message="ServiceConfigurationRules-v1-0:GetBasicProductMigrationRequest"/>
<output message="ServiceConfigurationRules-v1-0:GetBasicProductMigrationResponse"/>
<fault message="ServiceConfigurationRules-v1-0:ServiceActivationRequest" name="GetBasicProductMigrationException"/>
</operation>
<operation name="CompareResourceTechnology">
<input message="ServiceConfigurationRules-v1-0:CompareResourceTechnologyRequest"/>
<output message="ServiceConfigurationRules-v1-0:CompareResourceTechnologyResponse"/>
<fault message="ServiceConfigurationRules-v1-0:ServiceActivationRequest" name="CompareResourceTechnologyException"/>
</operation>
</portType>
<binding name="ServiceConfigurationRules_ptSOAP11Binding" type="ServiceConfigurationRules-v1-0:ServiceConfigurationRules_pt">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="GetAddActivationConfiguration">
<soap:operation style="document" soapAction="http://xxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetAddActivationConfiguration"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetAddActivationConfigurationException">
<soap:fault name="GetAddActivationConfigurationException" use="literal"/>
</fault>
</operation>
<operation name="ResourceChangeMigration">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/ResourceChangeMigration"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="ResourceChangeMigrationException">
<soap:fault name="ResourceChangeMigrationException" use="literal"/>
</fault>
</operation>
<operation name="ResourceChangeMigrationUpgrade">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/ResourceChangeMigrationUpgrade"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="ResourceChangeMigrationUpgradeException">
<soap:fault name="ResourceChangeMigrationUpgradeException" use="literal"/>
</fault>
</operation>
<operation name="GetAntenaSenial">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetAntenaSenial"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetReasonResponseException">
<soap:fault name="GetReasonResponseException" use="literal"/>
</fault>
</operation>
<operation name="OrderPayPerViewRule">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/OrderPayPerViewRule"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="OrderPayPerViewRuleException">
<soap:fault name="OrderPayPerViewRuleException" use="literal"/>
</fault>
</operation>
<operation name="GetServiceActivation">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetServiceActivation"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="ServiceActivationException">
<soap:fault name="ServiceActivationException" use="literal"/>
</fault>
</operation>
<operation name="GetOperationForWOServiceType">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetOperationForWOServiceType"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetOperationForWOServiceTypeException">
<soap:fault name="GetOperationForWOServiceTypeException" use="literal"/>
</fault>
</operation>
<operation name="GetMaxResourcesForCustomer">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetMaxResourcesForCustomer"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetMaxResourcesForCustomerException">
<soap:fault name="GetMaxResourcesForCustomerException" use="literal"/>
</fault>
</operation>
<operation name="GetBasicProductMigration">
<soap:operation style="document" soapAction="http://xxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/GetBasicProductMigration"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="GetBasicProductMigrationException">
<soap:fault name="GetBasicProductMigrationException" use="literal"/>
</fault>
</operation>
<operation name="CompareResourceTechnology">
<soap:operation style="document" soapAction="http://xxxxxx.com/schema/businessdomain/ServiceConfigurationRules/v1-0/CompareResourceTechnology"/>
<input>
<soap:body use="literal" parts="parameter"/>
</input>
<output>
<soap:body use="literal" parts="parameter"/>
</output>
<fault name="CompareResourceTechnologyException">
<soap:fault name="CompareResourceTechnologyException" use="literal"/>
</fault>
</operation>
</binding>
<plnk:partnerLinkType name="ServiceConfigurationRules_pt_PL">
<plnk:role name="ServiceConfigurationRules_pt_Role">
<plnk:portType name="tns:ServiceConfigurationRules_pt"/>
</plnk:role>
</plnk:partnerLinkType>
<service name="ServiceConfigurationRules_pt">
<port name="ServiceConfigurationRules_ptPort" binding="ServiceConfigurationRules-v1-0:ServiceConfigurationRules_ptSOAP11Binding">
<soap:address location="http://host:port/soa-infra/services/default/ServiceConfigurationRules/ServiceRules"/>
</port>
</service>
</definitions>
Thank you. -
Setup Assistant unable to find base station
Ok I am new to wireless so here goes. I have a iMac G5 2.0 running 10.4. I just bought the base station today. I am trying to use dsl with PPPoE. I have checked those settings about a 100 times. The same settings and cable I am using to post here to this forum thru ethernet.
I plug in the base and when I get the flashing amber it is recognized in the internet connet app with a full signal strength. If I try to connect it tells me it cannot locate the server.
When I try the setup assist app and select 'Set up a new Airport Base Station' and hit continue. it immediately say it found a new Airport Express base station and includes the name. But when I hit continue again it takes a minute to think the brings up a error message. '...unable to find your base station.
I also come up empty with the Airport Admin utility. Nothing shows in it.
I hope someone can help. Thanks.
Jeffrey DaltonWhether or not a sound system is plugged into the Airport Express has no influence on the generation of this error message by the Airport Setup Assistant.
I have a distinct feeling I'm going to be reiterating everything the people at Mac support told you to do (so it would be helpful to tell us at the start what you have tried thus far to solve the problem) but the next thing I would recommend is a factory default reset of the Airport Express per:
http://docs.info.apple.com/article.html?artnum=108044
The other thing that can cause all sorts of grief is any non-Apple firewall software you might have installed on this Mac - that includes firewalls, "internet protection" software, and VPN client software. The MacOS built in firewall is OK - but all this other baggage should either be disabled or uninstalled. -
Unable to find any airport wireless device
Hey there. I very recently installed airport Utility (latests version) for windows 7, for the purpose of fowarding ports 1630-1636 for a game. Sadly, whenever i launch Airport Utility, i get the error message "AIrport utility was unable to find any Airport wireles devices. Please make sure your device is in range of your computer and plugged in. Then rescan and try again." Please help! I'm never able to find my modem (which is an airportextreme) making it impossible to foward these ports!
Any input will be greatly appreciated!Are you connected to the Aiport Extreme either wirelessly or by ethernet?
-
Unable to find PL/SQL library in UNIX
Hi,
I am trying to run a report in Unix server after developed and tested in Windows NT. It works fine with Windows NT. But while running in UNIX it gives me the following error.
REP-0756: Warning: Unable to find PL/SQL library 'ACES_LETTER_LIB'.
REP-0736: There exist uncompiled program unit(s).
REP-1247: Report contains uncompiled PL/SQL.
Both the rdf file and the pll library files are in the bin directory. Here are the environment variable I set in UNIX.
ORACLE_HOME=/opt/reports6i/ora6i
REPORTS60_PATH=/opt/reports6i/ora6i/bin
Even the PL/SQL library file is in the above path it giving me the above error. Can somebody help me out of this.
Prashant
null<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by prashant Sahoo ([email protected]):
Hello Sir,
As per you , I compiled everything in Windows NT. And when I ran it on windows NT it works fine. But when I tried to run the same in Unix server (where the production Report Server 6i is installed) by ftp the RDF file and PLL file to bin directory in binary mod and tried to run from a remote client thru command line syntax it gives me the above error again. Please help me out.
Prashant<HR></BLOCKQUOTE>
null -
In Apple Mail Inbox window after replying to an e-mail then clicking on the reply arrow icon to see the reply, I get the error dialog box "Mail was unable to find your reply to the message "SUBJECT". You my have deleted the message.
Also, when I check the "sent" box for the reply, it is missing.
But I haven't deleted the message.
And I have run "rebuild" but it didn't help.
Any suggestions please?The "store sent messages on the server" options is only for IMAP and since this is a POP account, it doesn't have this option.
BUT...I played around a little and deselected "store sent messages on the server" on one of my IMAP accounts. For the heck of it I checked the POP account and to my surprise, the sent mail replies are now visible.
Then I went back in and reselected "store sent messages on the server" for the IMAP account and the POP account sent mail replies remain visible.
So, doesn't make sense to me..but it now works fine.
Thank you for your help?
;-)Jon -
Any Update on Mail's "unable to find your response"?
This has been discussed here in past years, I can see, but I'm still wondering if there's been a fix....
My Mail program (2.1.3) is still doing it about 50% of the time. An email I responded to just last night, still in my InBox (or it could be in the Trash as well) -- this morning I can't find using the round gray arrow, getting the same error message saying "Mail was unable to find your response to..."
Any fix for that? Isn't it about time for Apple to fix this? Or is Tiger a Dinosaur Apple wants to dump and forget about?.....In your Inbox messages, whenever you reply to a certain message, there is a curved gray arrow created to the left of the message. When you click on that arrow, the reply message is suppose to open in a different window.
Ah, I see, thanks, is this a Pop or IMAP account?
I wish I could embed a screen shot....
To insert images into your post, use the <img>-tag. Note that the image you want to use in your post needs to be hosted online (e.g. on your .Mac website, etc.); you can not upload images to Apple Discussions.
For example...
<img src="/___sbsstatic___/migration-images/123/12353944-1.jpg">
displays the file stored at your specified location. -
Mail is unable to find response to messages
When selecting the backward arrow icon in the mail column view I get an error message reading 'Mail was unable to find your response to the message “message title”. You may have deleted the message.'
This occurs frequently, even right after sending an e-mail. I am confused as I did not delete the copy of the outgoing message and it is still found in the "sent" message mailbox.
This did not occur in my old Powerbook but has started in my new MacBook Pro. I have everything set up the same as my Powerbook so, again I am confused. The email accounts are POP (not imap), if that makes a difference.
Any info would be helpful. Thanks!This is a problem that has been reported here quite a few times and for which no solution has been found yet. Doing some cache-cleaning, or even just restarting the computer, fixed the problem in some cases.
Read the following article for general troubleshooting and cache-cleaning procedures:
Resolving Disk, Permission, and Cache Corruption
Be sure to read this as well:
Side effects of System cache cleaning
In addition to the utilities mentioned there for cache cleaning, you may also consider OnyX or Cache Out X, which are free. -
Unable to find SAP_ESS component in Software Component
Hi,
WE have deployed Webdynpro based ESS and MSS BP in EP 6.0 SP 9. They are working fine when viewed through Portal. We want to modify the ESS/MSS pages.
We followed the JDI cookbook and installed and configured the JDI. THe installation was without problems.
We have also created the new CMS domain as per the cookbook. Now in the next step when we have to create the track in the "Track Data" and select the "Add SC" we cannot find the SAP_ESS or SAP_MSS component under sap.com
we were also unable to find it in SLD under "Software Components".
When we go to webdynpro content administrator we can still find the ESS as well as MSS components deployed.
Can anybody help us to find out why we are not able to find these components???
Best Regards,
VishalHi Vishal
import the CR content on J2EE server follow the sap
note :- 669669
regards,
kaushal
Maybe you are looking for
-
Export Arabic Crystal Report To PDF
Hi, I am using JRC component to build crystal reports in English & Arabic. All works well except exporting Arabic crystal report to PDF? Crystal File Format Schema: 12.0.0 I was reading another 3 years old thread and this was stated there: "If you ar
-
Can't Play DVD (with VLC, Totem, Xine, MPlayer), But Works in Windows
I have a DVD that I can't play for the life of me in Arch. I've tried VLC, Totem, Xine, and MPlayer. And I do have libdvdcss installed. Other DVDs work fine. With VLC the DVD menu comes up, but when I hit play I get choppy sound and no picture. And I
-
Help! My Macbook Pro will not recognise my M-Audio Firewire 410 interface
Hi I'm new here and fairly new to Macs having only recently bought a Macbook Pro. My plan is to use the Macbook primarily for music but I can't get my M-Audio Firewire 410 audio interface working. I have installed the latest Intel driver but when I p
-
Hi, i want to install oracle 10g on RHEL5(Red hat) where i can get softwar
i want to install oracle 10g on redhat5 pls some one tell me where i can get oracle software.
-
Hi, We'are using oracle database 8.1.7.4 OPS cluster on 2 nodes. Recentaly our listener in the node#1 has started leaking. How to findout the reason for this leak. And how to prevent this error? Thanks. Regards, Shabbir Hussain.