Error starting resources with srvctl

Hi,
Has any experienced the following errors when trying to start resource in a 10.2.0.3 rac cluster?
[node1:oracle]:/appl/oracle > srvctl start listener -n node1
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.node1.LISTENER_NODE1.lsnr' has placement error.
[node1:oracle]:/appl/oracle >
Is there a command that I can use to see what parameters the resource has been been created with? The error indicates that the problem may be with the PLACEMENT parameter which I believe is part of the resources profile. How can I can confirm what the PLACEMENT for this resource is?
Thanks

hi,
i hit same problem. I changed owner to oracle $ORA_CRS_HOME/log/<node>/racg. But still have same issue. Could you let me kow what you did. I have not problem to start lsnr manually.
% srvctl start listener -n qammdb01
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.qammdb01.LISTENER_QAMMDB01.lsnr' has placement error.
% lsnrctl start LISTENER_QAMMDB01
LSNRCTL for Solaris: Version 10.2.0.3.0 - Production on 25-SEP-2007 20:46:27
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener_qammdb01.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.20.5.172)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.20.5.169)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.20.5.172)(PORT=1521)(IP=FIRST)))
STATUS of the LISTENER
Alias LISTENER_QAMMDB01
Version TNSLSNR for Solaris: Version 10.2.0.3.0 - Production
Start Date 25-SEP-2007 20:46:27
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener_qammdb01.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.20.5.172)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.20.5.169)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
I opened SR in metalink. But oracle support is clueless
thanks a lot for help.

Similar Messages

  • Cound not start Database with SRVCTL

    Hi,
    We have 2 node Oracle RAC 10g on linux .But the problem is we can only start the database with SRVCTL command.The statistics of crs are given bellow
    crs_stat -t -v
    Name Type R/RA F/FT Target State Host
    ora.mitc.db application 0/1 0/1 ONLINE OFFLINE
    ora....c1.inst application 0/5 0/0 ONLINE OFFLINE
    ora....c2.inst application 0/5 0/0 ONLINE OFFLINE
    ora....UB.lsnr application 0/5 0/0 ONLINE ONLINE rac1pub
    ora....pub.gsd application 0/5 0/0 ONLINE ONLINE rac1pub
    ora....pub.ons application 0/3 0/0 ONLINE ONLINE rac1pub
    ora....pub.vip application 0/0 0/0 ONLINE ONLINE rac1pub
    ora....UB.lsnr application 0/5 0/0 ONLINE ONLINE rac2pub
    ora....pub.gsd application 0/5 0/0 ONLINE ONLINE rac2pub
    ora....pub.ons application 0/3 0/0 ONLINE ONLINE rac2pub
    ora....pub.vip application 0/0 0/0 ONLINE ONLINE rac2pub
    and when we start the database we got the following error
    [oracle@rac1pub ~]$ srvctl start database -d mitc
    PRKP-1001 : Error starting instance mitc1 on node rac1pub
    CRS-0215: Could not start resource 'ora.mitc.mitc1.inst'.
    PRKP-1001 : Error starting instance mitc2 on node rac2pub
    CRS-0215: Could not start resource 'ora.mitc.mitc2.inst'.
    Please,help in this matter.

    Thanx for your reply
    The log file of CRSD has the following entries
    2011-04-20 14:07:21.831: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:08:22.184: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:09:22.534: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:10:22.887: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:11:23.240: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:12:25.666: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:12:26.801: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:12:26.903: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [146043288] retval lht [-27] Signal CV.
    2011-04-20 14:14:24.275: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:15:24.627: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:15:38.383: [  CRSRES][3739253664]0startRunnable: setting CLI values
    2011-04-20 14:15:38.404: [  CRSEVT][3739253664]0CAAMonitorHandler :: 0:Action Script for resource 'ora.mitc.mitc1.inst' stdout redirection failed for `/oracle/product/10.2.0/crs/crs/log/startRqwsEA.stdout` : No such file or directory
    2011-04-20 14:15:39.747: [  CRSAPP][3739253664]0StartResource error for ora.mitc.mitc1.inst error code = 1
    2011-04-20 14:16:24.989: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:17:25.346: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:18:25.688: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:19:02.007: [  CRSRES][3739253664]0startRunnable: setting CLI values
    2011-04-20 14:19:02.037: [  CRSEVT][3739253664]0CAAMonitorHandler :: 0:Action Script for resource 'ora.mitc.mitc1.inst' stdout redirection failed for `/oracle/product/10.2.0/crs/crs/log/startufHsG5.stdout` : No such file or directory
    2011-04-20 14:19:03.372: [  CRSAPP][3739253664]0StartResource error for ora.mitc.mitc1.inst error code = 1
    2011-04-20 14:19:26.034: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:20:26.386: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145591424] retval lht [-27] Signal CV.
    2011-04-20 14:20:52.294: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145593896] retval lht [-27] Signal CV.
    2011-04-20 14:20:52.517: [  OCRUTL][3931159456]u_freem: mem passed is null
    2011-04-20 14:20:52.961: [  CRSRES][3771255712]0Attempting to start `ora.mitc.mitc2.inst` on member `rac2pub`
    2011-04-20 14:20:52.989: [  CRSRES][3781745568]0startRunnable: setting CLI values
    2011-04-20 14:20:53.004: [  CRSRES][3781745568]0Attempting to start `ora.mitc.mitc1.inst` on member `rac1pub`
    2011-04-20 14:20:55.049: [  CRSAPP][3781745568]0StartResource error for ora.mitc.mitc1.inst error code = 1
    2011-04-20 14:20:55.236: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145997144] retval lht [-27] Signal CV.
    2011-04-20 14:20:55.929: [  CRSRES][3771255712]0Start of `ora.mitc.mitc2.inst` on member `rac2pub` failed.
    2011-04-20 14:20:56.628: [  CRSRES][3781745568]0Start of `ora.mitc.mitc1.inst` on member `rac1pub` failed.
    2011-04-20 14:21:26.746: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145593896] retval lht [-27] Signal CV.
    2011-04-20 14:22:25.372: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [146011440] retval lht [-27] Signal CV.
    2011-04-20 14:22:26.026: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145593896] retval lht [-27] Signal CV.
    2011-04-20 14:22:27.151: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145283768] retval lht [-27] Signal CV.
    2011-04-20 14:23:27.451: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [145593896] retval lht [-27] Signal CV.
    2011-04-20 14:24:27.804: [  OCRSRV][4078017440]th_select_handler: Failed to retrieve procctx from ht. constr = [146011440] retval lht [-27] Signal CV.
    There is not any error found in alter log file of database.

  • Can we start DB with srvctl start DB?

    I can't access sqlplus can i start db with this command in 9i?
    srvctl start db

    Hello,
    Probably your PATH is not set correct provided your sqlplus utility is functioning.
    Set your environment either in .profile or .bash_profile in $HOME directory (Solaris / UNIX flavor)
    export ORACLE_SID=orcl
    export ORACLE_HOME=/u01/oracle/product/XXXX
    export ORACLE_BIN=$ORACLE_HOME/bin
    export PATH=$PATH:$ORACLE_BIN
    now you try to run sqlplus at command line. It should work. Please customize the environment varibles for your own environment.
    Let me know if this works. Hope this helps.
    - Leo

  • Error starting solman_setup with 7.1 SPS03

    I have just installed solman 7.1 and patched to sps03. 
    However, when I run SOLMAN_SETUP I get a script error in the browser window:
    Message: 'UCF_Properties' is undefined
    Line: 1
    Char: 1222
    Code: 0
    URI: http://x.x.x:8000/sap/bc/webdynpro/sap/wd_sise_main_app?sap-language=EN
    I found OSS notes 1547441 and 1621785 regarding the wizard using flash technology, however the workarounds (adding a flag to the URL and installing latest Adobe Flash player v11) provided in those notes did not help!
    I opened a customer message, but curious if anyone else has this issue!

    Strange
    A colleague with a lower IE8/Flash version did not have an issue. 
    Since it was a script error I tried (in IE) Tools-Developer Tools when I got the error.  It brought up the page source, I went to the script tab and clicked start debugging, with breakpoints set to 'break on error'.  Then the page actually displayed!  Now it is working even without debugging!!
    I have a customer message still open and if they provide anything, but this seems to be working now!
    FYI, my versions:
    IE 8.0.7600.16385
    Adobe Flash Player 11 Active X 11.0.1.152
    Adobe Flash Player 10 Plugin 10.1.102.64

  • Error starting Server with Clustering License

              Hello
              I was using WebLogic Application server ver 6.0 evaluation copy
              and everything was working fine. When I have updated the license
              to use the clustering capabilities of Weblogice server , I was
              not able to start the weblogic server and the server was throwing
              following exception.
              Throwable: weblogic.server.ServiceFailureException: Cluster service
              - with nestd exception:
              [java.net.SocketException: Unknown error]
              weblogic.server.ServiceFailureException: Cluster service - with
              nested exception:
              [java.net.SocketException: Unknown error]
              at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:446)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:170)
              at weblogic.Server.main(Server.java:35)
              '>
              I haven't configured any cluster on my server.
              Do I have to do anything beside running upgradeLicense command
              using the new locense. Is there anything I am missing here.
              Thanks in Advance
              Sunil
              

    Just to be clear, the WLS 6.0 software downloaded from the web site is
              the full product and supports clustering, in-memory replication, etc.
              The evaluation license packaged with the software does not provide keys
              to enable these features. To evaluate these features, you need to
              contact your BEA sales person to get a license to turn these features
              on.
              Kent Kong wrote:
              > hi ,
              > If your wls6.0 is downloaded from the website of bea, it doesnot
              > support cluster service.
              > You should ask our sales for a complete one.
              >
              > Otherwise ,maybe the version of the server in your cluster
              > is not the same.
              >
              > Kent Kong
              

  • Error starting SAP with SSO - gssntlm.dll

    Hi gurus,
    I have configured my instance profile to use SSO, but starting my instance iu00B4ve got this error in log file:
    SncInit(): Initializing Secure Network Communication (SNC)
    PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
    SncInit(): found snc/data_protection/max=1, using 1 (Authentication Level)
    SncInit(): found snc/data_protection/min=1, using 1 (Authentication Level)
    SncInit(): found snc/data_protection/use=1, using 1 (Authentication Level)
    SncInit(): found snc/gssapi_lib=E:\usr\sap\BWD\SYS\exe\run\gssntlm.d ll
    ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\BWD\SYS\exe\run\gssntlm.dll) Error 193 [dlnt.c 237]
    ERROR => SncPDLInit(): DlLoadLib("E:\usr\sap\BWD\SYS\exe\run\gssntlm.dll") =DLENOACCESS
    [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) E:\usr\sap\BWD\SYS\exe\run\gssntlm.dll not loaded
    [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
    sec_avail = "false"
    ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c 223]
    ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c 225]
    in_ThErrHandle: 1
    ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c 9621]
    so what could be reason the above errors are coming?
    Thanks
    Estevan Stracke
    SAP BASIS Consultant

    Well I use gssapi32.dll not gssntlm.dll but otherwise you look okay.
    Do you have gssntlm.dll in the E:\usr\sap\BWD\SYS\exe\run directory and have you set the SNC_LIB system variable?
    Set the NT environment variable SNC_LIB on the PC where your SAPgui runs.  The variable specifies the path to the gssapi32.dll file.  To do this:
    a.     Choose Start -> Settings -> Control Panel -> System -> Environment.
    b.     In System Variables enter the following:
    Variable:           SNC_LIB
    Value:           E:\usr\sap\BWD\SYS\exe\run\gssntlm.dll
    c.     Choose Set and confirm your entries with OK.
    Edited by: Michael Evershed on Nov 6, 2008 7:36 PM

  • Error starting WLS_REPORTS with Configuration Wizard on OFM Portal,Forms...

    I execute the configuration wizard to create a domain with Portal, forms, REports and Discoverer 11.1.1.3 (before I install Weblogic 10.3.3 and OFM 11.1.1.2 only software):
    Executing Task: Iniciando Servidor Gestionado: WLS_REPORTS
    XXX: adding task: oracle.as.install.classic.ca.standard.StartStopManagedServer
    AdminServer port is 7001
    trying to connect to 192.168.6.15 7001
    Successful
    getDomainRuntimeMBeanServerConnection ...
    Connecting to Domain runtime ...
    trying to connect to 192.168.6.15 7001
    Successfully connected to the Domain Runtime ...
    trying to connect to 192.168.6.15 7001
    Successful
    MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@fcd3ee
    Starting Managed Server : WLS_REPORTS
    In public start
    ASWLServer.start ...
    getDomainRuntimeMBeanServerConnection ...
    Connecting to Domain runtime ...
    trying to connect to 192.168.6.15 7001
    Successfully connected to the Domain Runtime ...
    getDomainRuntimeMBeanServerConnection ...
    Connecting to Domain runtime ...
    trying to connect to 192.168.6.15 7001
    Successfully connected to the Domain Runtime ...
    oracle.as.provisioning.exception.ASProvisioningException
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
         at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
         at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
         at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
         at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.as.provisioning.exception.ASProvWorkflowException
         at oracle.as.provisioning.weblogic.ASWLServer._start(ASWLServer.java:1026)
         at oracle.as.provisioning.weblogic.ASWLServer.start(ASWLServer.java:897)
         at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:813)
         at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:482)
         at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
         ... 13 more
    I don't find the correct information to solve the error. Can you help me please?
    Thanks.
    Bond

    The OS is Windows XP Service Pack 3.
    I tried to continue and all the components or REPORTS failed, even the Enterprise Manager.

  • Error starting weblogic Admin server

    Hi All,
    I am not very familiar with Fusion and weblogic but here is my situation:
    Background: I am trying to install Fusion Middleware so I can integrate Oracle Transport Management with E-Business Suite (as per note Integrating Oracle E-Business Suite Release 12 with Oracle BPEL in Oracle SOA Suite 11g (Doc ID 1321776.1))
    I just installed the following on Oracle Enterprise  Linux 64bits
    - SOA Suite 11.1.1.7.0
    - Weblogic Server 10.3.6
    -JDK 1.7.0_25
    -Jdev 11.1.1.7.0
    When starting the weblogic Admin server using "DOMAIN_HOME/startWebLogic.sh' I get an error:
    Starting weblogic with Java version:
    Unrecognized option -jrockit
    Error: Could not create the Java virtual machine
    I found a few thread with similar issue (for different versions of SOA suite)  where it got fixed by changing some parameters in the cmd file but I am not sure they apply to my case.
    Is the jdk version compatible? (I can start JDeveloper ok) , if not which one is the appropriate version. If i need to change it, can you provide details of how to do it? (I am not expert on SOA/Jdev  )
    Can you please help me here ?
    Thanks in advance!

    Well, I tested it
    java -version and it shows :
    1.7.0_25
    Java HotSpot 64 bit Server VM
    --> So I guess the problem is I don't seem to have the jrockit.
    I donwloaded it (Rel 28.7) and installed it. During installation it says "for JDK 1.6.0_45"
    Anyway. I let it install anyway and I modified the PATH to point to the Jrockit bin directory. Then run java -version and it now shows JDK 1.6.0_45 and jvm as rockit
    Now I tried to start the weblogic server and I get the same error. it still uses the JDK 1.7
    So.. again.. is this supported with JDK 7 ?
    How can I fix it now that I installed everything using the JDK 7?
    Thanks

  • Can't start instance by srvctl with error PRKP-1001 and CRS-0215

    We just create a database with Oracle10g RAC and ASM on 8 nodes, but only node1's instance can start up. What's wrong with the other nodes?
    The error is below:
    oracle@DBRAC01:~> srvctl status instance -i dbrac2 -d dbrac
    Instance dbrac2 is not running on node dbrac02
    oracle@DBRAC01:~> srvctl start instance -i dbrac2 -d dbrac
    PRKP-1001 : Error starting instance dbrac2 on node dbrac02
    CRS-0215: Could not start resource ora.dbrac.dbrac2.inst.
    What should I do? Modify some configurations ?

    Have you configured the required virtual IP addresses for the Instances? If no use Virtual IP Configuration Assistant (VIPCA) to do so. Your installtion guide should show how to do this.
    If yes, see if you are hitting Bug 4337645.
    The error message relates to the -s flag for the Oracle Cluster Registry (OCR). In Oracle 9.2, when the database was added to the OCR, the -s flag referred to the spfile. But in Oracle 10g, it indicates a database startup option.
    With your example, assuming your directory is directory is /u01/oradata, the [DATABASE.DATABASES.mydb.START_OPTIONS] entry in the OCR will show something like ORATEXT : /u01/oradata/dbrac2/spfiledbrac2.ora
    Correct this problem by modifying the startup option as below
    $ srvctl modify database -d dbrac2 -s open

  • Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA)

    Hello Gurus 
    i have installed windows server 2012 RTM with Hyper-V. i already created virtual machine with virtual fiber channel adapter connected to physical one. sometimes when i restart the virtual machine it gets failed to start again and the following error appears
    in the event viewer of the host:
    error id 21502
    'Virtual Machine xyz' failed to start.
    'xyz' failed to start. (Virtual machine ID number)
    'xyz' Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA). (Virtual machine ID
    number)
    'xyz': Operation for virtual port (C003FF18F98C000E) failed with an error: No physical port available to satisfy the request (Virtual machine ID
    number).
    error id 1069
    Cluster resource 'Virtual Machine xyz' of type 'Virtual Machine' in clustered role 'xyz' failed. The error code was '0x5aa' ('Insufficient system resources exist to complete the requested service.').
    Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it.  Check the resource and group state using Failover Cluster
    Manager or the Get-ClusterResource Windows PowerShell cmdlet.
    appreciate your help
    Ashraf

    Dear All,
    Subject : Need to create a file cluster
    in Guest Vms (Host machine : Windows 2012 R2), using MSA p2000 strorage with HBA Qlogic (HP 8Gb PCIe Host Bus Adapter)
    Note: It's a direct connection from HBA to HP MSA p2000 (No SAN switch in between)
    Currently I am using Qlogic HBA (HP
    81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter- Part No. AK344A).
    Unable to create vPort using  Microsoft
    Hyper-V (Win 2012 R2) & secondly using QConverge
    Console utility.
           When trying to create  Microsoft
    Hyper-V (Win 2012 R2), I received the below error.
    Secondly, when I am trying to create vSAN switch in using Qlogic QConverge Utility the above error is popup. 
    Currently I am using the following latest version of Qlogic Firmware & Drivers...
    HBA - Running Firmware Version:  7.00.02
    HBA - Driver Version:  STOR Miniport 9.1.11.24
    If any body the same issue, Please could you update me as earliest.
    Regards,
    Mirza

  • Daqmx error num: -50103 with message: The specified resource is reserved. The operation could not be completed as specified.

    Hi, I am running a program where I have 4 nidaq cards on a single machine, all connected. I am trying to start a counter and keep getting that error (daqmx error num: -50103 with message: The specified resource is reserved. The operation could not be completed as specified.) in two places in my code. I understand what the error means (you can only have one task of a type per card), but I don't see where that is occuring in my code.
    See below for code. I noted the two places where the error is occuring. I am debugging someone else's code, which is part of the problem.
    Thanks!
    counterTask = 0;
    daq_err_check( DAQmxCreateTask( "counter_generation_task",
    &(counter_generation_task) ));
    daq_err_check( DAQmxCreateTask("counter_count_task",
    &(counter_count_task) ));
    char co_chan_name[40];
    char ci_chan_name[40];
    char ci_trig_chan_name[40];
    sprintf( co_chan_name, "%s/ctr0", niDev);
    sprintf( ci_chan_name, "%s/ctr1", niDev);
    sprintf( ci_trig_chan_name, "/%s/PFI9", niDev);
    printf("OK1");fflush(stdout);
    daq_err_check( DAQmxCreateCOPulseChanTicks( counter_generation_task,
    co_chan_name, "", "ai/SampleClock",
    DAQmx_Val_Low, 32,16,16) );
    daq_err_check( DAQmxCfgImplicitTiming( counter_generation_task,
    DAQmx_Val_ContSamps, 1000) );
    daq_err_check( DAQmxCreateCICountEdgesChan( counter_count_task,
    ci_chan_name, "",
    DAQmx_Val_Rising, 0, DAQmx_Val_CountUp) );
    daq_err_check( DAQmxCfgSampClkTiming( counter_count_task,
    "Ctr0InternalOutput", 1000.0, DAQmx_Val_Rising,
    DAQmx_Val_ContSamps, 1000) );
    daq_err_check( DAQmxSetRefClkSrc( counter_generation_task, "OnboardClock") );
    daq_err_check( DAQmxSetRefClkSrc( counter_count_task, "OnboardClock") );
    printf("abt to start counter_count\n"); fflush(stdout);
    daq_err_check ( DAQmxStartTask( counter_count_task ) ); // ERROR OCCURS HERE
    printf("abt to start counter_gen\n"); fflush(stdout);
    daq_err_check ( DAQmxStartTask( counter_generation_task ) ); // ERROR OCCURS HERE
    fflush(stdout);
    Thanks again for your patience!

    I get it when capturing from my mini DV cam (which is not controllable by FCP). To resolve, I have to click Capture Now a split second after I start the DV tape rolling.

  • Set resource attribute with srvctl instead of crsctl ?

    Hello,
    We're in 11gR2, Grid Infrastructure.
    CMOS note 790189.1 states that "using crs_* or crsctl commands on resources with the prefix ora.* (resources provided
    by Oracle) remains unsupported".
    So do you think there's a way to modify the AUTO_START attribute of a cluster resource through the use of srvctl instead
    of crsctl ?
    (I found no "srvctl modify resource" option likely to do this trick...)
    Thanks.
    Seb

    Is your end goal to stop the service from starting automatically? If so, then use srvctl disable service. You will have to enable it before it can be started.
    Cheers,
    Brian

  • Root.sh failed with CRS-2800:   Can't start resource 'ora.ctssd' as it is

    Cannot start resource 'ora.ctssd' as it is already in the INTERMEDIATE state.
    I was trying to install two node RAC on linux REDHAT, I have encountered following errors:
    Start of resource "ora.crsd" failed
    CRS-2800: Cannot start resource 'ora.ctssd' as it is already in the INTERMEDIATE state on server
    CRS-4000: Command Start failed, or completed with errors.
    Clusterware exclusive mode start of Clusterware Ready Services failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6475.
    /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
    How to fix this issue?
    runCluvfy ran successfully.
    I found out on the second node(oracle02), there is no any daemon running. But on the local installation node(oracle01):
    [[email protected] bin]# ./crsctl stat res -t -init
    NAME TARGET STATE SERVER STATE_DETAILS
    Cluster Resources
    ora.asm
    1 ONLINE ONLINE oracle01 Started
    ora.cluster_interconnect.haip
    1 ONLINE ONLINE oracle01
    ora.crf
    1 OFFLINE OFFLINE
    ora.crsd
    1 ONLINE OFFLINE
    ora.cssd
    1 ONLINE ONLINE oracle01
    ora.cssdmonitor
    1 ONLINE ONLINE oracle01
    ora.ctssd
    1 ONLINE INTERMEDIATE oracle01 Wrong check return.
    ora.diskmon
    1 ONLINE ONLINE oracle01
    ora.drivers.acfs
    1 ONLINE ONLINE oracle01
    ora.evmd
    1 OFFLINE OFFLINE
    ora.gipcd
    1 ONLINE ONLINE oracle01
    ora.gpnpd
    1 ONLINE ONLINE oracle01
    ora.mdnsd
    1 ONLINE ONLINE oracle01
    [[email protected] bin]#
    How to proceed next step? what to fix in order for my installation to be successful.
    Thanks in advance.

    OK, please post the css last lines in the log.
    Also, if you have alert log (for crs, it should be under $GI_HOME/log/<hostname>) post it as well.
    It's a bit complicated to trace it here, I'll do my best, but you might want to open an SR on this.
    Liron

  • Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

    Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit".  Please advise on how to fix this error.  Thanks

    Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit".  Please advise on how to fix this error.  Thanks

    You probably need to delete your preview cache.  See here  
    Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
    Preference and other file locations in Lightroom 5

Maybe you are looking for

  • IPhone not recognised in iTunes after upgrading to 10.0.1

    Hi, I hope someone out there can help with a problem I have with my iPhone 3GS currently running 4.1. I recently upgraded to iTunes 10.0.1 and iTunes has not worked correctly since. When I connect my iPhone to PC with a USB I receive the usual pop-up

  • Enterprsise search error  - HTTP server error: 503 (Errorcode 7266)

    HI i am geting following error when serching docs in portal using TREX.. Search Failure Error during search occurred - com.sapportals.wcm.WcmException: HTTP server error: 503 (Errorcode 7266) An unexpected severe error occurred during the search call

  • Portlet Main Banner links

    Does anyone know how to turn off the main banner link in a contentr area portlet. We want to stop the user drilling into the content area itself but simply use the links displayed in the content area.

  • Xp_logevent

    Hi there, I need to send the content of a specific table (two columns) to the event log. can it be done ? can I do it through an array? thanks.

  • Point "TargetServerURL" property to External Server

    Hi All,         I have 2 servers (Server A,Server B).In "Server B" the SSRS is configured and it is in right condition.And in "Server A" we are building the reports through BIDS which comes with Sql Server.        As we are creating the reports in "S