Error status 51 in receiver system

Hi ,
I am trying to synchronise Purchase Requisitions of two different Application Servers of SAP through IDOC. I am using the IDOC type "PREQCHANGE01". I am doing the mapping of IDOC segments on the sender system programmatically. I have mapped all the fields required for the purchase Requisition.
Idoc is successfully transferred from sender system to receiver system, In my receiver system, while trying to view the inbound idoc in "WE02", it is in status 51 and giving errors as follows.
1. Enter Document Type
2. Document contains no items
3. Instance <My PR No> of object type PurchaseRequisition could not be changed.
Please help me solve this.
Thanks in Advance,
Cheers,
Vivek.

Hello,
The Idoc is made up of 3 Main segments,
Control Record
    IDoc number, Direction, Status, Basic type, Extension, Message type ,Sender or Recipient information, Port, Partner number,
     Partner Type, SAP Release
Data Records
    The structure of a data segment depends on the segment type
Status Records
    Status: the status reported by the segment
    Message: the text describing the status.
You need to fill the map the Idoc Data Record with the PR details.
Check the below link [IDOC1|http://wiki.sdn.sap.com/wiki/display/ABAP/CustomIdocTransferingfromOneapplicationserverintoAnotherapplicationserver]
[IDOC2|http://wiki.sdn.sap.com/wiki/display/ABAP/ALEandIDocs]
These links will help you understand the mapping and how you need to code your logic.
Regards,
Abhishek

Similar Messages

Status 56 in receiving system

Hi SDNers,
By BD87 transaction, I have to catch the status in receiving system.
To perform this task, I do the following steps:
1) Go to BD87 trx.
2) Select an idoc with status 3.
3) Execute the Tracing IDOCS system-wide (Trace IDOC).
I should obtain an idoc with status 53 in receiving system.
However, I finally obtain an idoc with status 56.
Where could I check to find the problem?
Thanks in advance for your help
Regards
Leo

Hi a®s,
Thanks for your soon asnwer. I've checked in the receiving system by WE20 and there is not an entry for my system source.
Are you talking about that when you say "idoc type is maintained"?
Thanks again
Regards
Leo

Conversion rule executed in sender and receiver system?

Hello experts,
I want to send an Idoc from one SAP system to another.
Both systems are in the same transport line.
In the sender system I want to execute a field conversion. There
Therefore I maintained BD62 (Define Conversion Rule), BD55 (activate Conversion Rule for Sender/Receiver combination) and BD79 (Specifie Conversion).
The mapping works perfectly.
The creation of the IDoc and the field conversion work perfectly.
But I get an error in the receiver system.
It seems that this system also tries to execute the fieldmapping, because it has the same BD55 (sender/receiver) settings.
The conversion rule itself does not exist in the receiver system, as these settings are not contained in a transport request.
What is the correct way? Can I customize BD55 not to generate a transport request and maintain this setting only in the relevant system?
Or do I need to maintain BD79 and BD62 also manually in the receiver system?
any hints
Barbara

Hi Barbara,
you have to maintain BD79 and BD62 manually in all receiver Systems.
Kind regards
Werner

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

IDoc Status 02 ( Could not find code page for receiving system )

Hi All,
I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
Error description.
Could not find code page for receiving system
Message no. E0266
Diagnosis
For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Procedure for System Administration
Possible causes are:
1. The entry no longer exists in the table of logical destinations.
2. The target system could not be accessed at runtime.
3. The logon language is not installed in the target system.
4. In the destination system, no logon language is maintained
Please help.
Thanks - Vinay.

Hi Vinay,
Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination is working fine and your able to connect to target system and also check correct port is assigned.
Regards,
Vinod.

BW Monitor error Could not find code page for receiving system

Hi All,
Frequent BW Monitor error - Could not find code page for receiving system
I checked SM59 and every setting is fine there. Any other possibility ?
Regards
Srinivas

The log updated in the status tab was:
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

Mail for Exchange "System error", "error status re...

If you are getting a "System error" and admin_log in \MailForExchange directory shows:
"error status received from server (12)"
The problem will be seen if you try a manual or interval (every 1 hour, etc) sync *after* you change the folders under 'Inbox' in Outlook. This affects users connected to an Exchange 2007 server.
The problem does not occur if Outlook folders are changed during 'Always on'.
Also, if the problem is encountered, MfE will 'fix' itself during the next 'Always on' period.
Manual sync users are more likely to encounter this.
You can fix this immediately if you perform a Options--Full_resync.
If you prefer not to perform a Full_resync because you have lots of data and are concerted about data costs, put MfE into 'Always on', let it sync, and then put it back to Manual.

Thanks allot.
This did it for me
Happy days!!!

Exchange 2010 Initialization failed: The WinRM client received an HTTP server error status 500

Good morning,
I have major problems with exchange 2010 this morning.
First off, exchange stopped sending and receiving any emails- whether internal or external. We are running a server 2008 R2 domain and exchange 2010 is installed on a Server 2008 virtual machine.
I tried simply rebooting the server and then tried logging on and getting into the Exchange Management Console. I receive the following error in the exchange management console:
Initialization failed
The following error occurred while attempting to connect to the specified Exchange server 'exchangesvr.chs.internal';
The attempt to connect to
http://exchangesvr.chs.internal/Powershell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: The WinRM client received an HTTP server error status (500), but the remote service did not include any
other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic.
I followed the steps listed here:
http://technet.microsoft.com/en-us/library/ff607221(EXCHG.80).aspx
but everything appeared to be correct. I did not have to make any changes because everything was set as it should be according to that information.
Any help would be much appreciated.
Best regards
Katrina

Hi,
I had the same problem, and I spent a weekend looking a solution, fortunally, I have it:
Please follow this steps:
Install WinRM IIS Extension, adding this feature from Server Manager.
Change  IPv4 over IPv6 lookup preference, because the FQDN fails to find the server on TCP/IPv6.
To verify this, on Command Prompt please make this test: ping yourserver.yourdomain.domain.
Maybe you obtain TCP/IPV6 address response.
Probably the Internet Information Services (IIS) Manager dont have the binding for IPv6, only for IPv4.
To change IPv4 over IPv6 lookup group prefence, follow this steps:
Please open regedit, locate the skubkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\
On DisabledComponents subkey, double click, change de value for
0x20 (or 4120 Hexadecimal). this value make  the Windows OS to prefer IPv4 over IPv6.
Repeat the test, on command prompt:
ipconfig /flushdns (Enter) to flush DNS cache.
ping yourserver.yourdomain.domain.
At this moment you obtain TCP/IPv4 address response.
To check Exchange Managment Console operation, you must restart the server.
Please restart the server.
          Best Regards,

The WinRM client received an HTTP server error status (500)

Hi All,
I have installed the Exchange 2010 Management Tools and a few roles on our DC (Windows Server 2008 R2) but i cannot even connect to it to configure anything.
If i use the management tools GUI i get an error message saying:
"Connecting to remote server failied with the following error message: The WinRM client received an HTTP server error status (500), but the remove service did not include any other informaition about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true'."
Using the Exchange Management Shell is get a similar error:
"Connecting to remote server failied with the following error message: The WinRM client received an HTTP server error status (500), but the remove service did not include any other informaition about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException
+ FullyQualifiedErrorId: PSSessionOpenFailed"
This comes up 3 times and then said it failed to connect and to enter the Server FQDN i want to connect to.
I have seen other posts where they have said to disable anonymous access for PowerShell in IIS which i have done and to also run the set-user yourusername -remotepowershellenabled:$true which i cannot run because i cannot even connect into it via PowerShell.
Tried to see if there was a way to reinstall the management tools because i have a feeling they didnt install properly but cant find a way to do that.
Tried to uninstall everything but i cannot because it says there are already mailboxes created (presume some default ones) but i cannot connect to remove them to uninstall.
I seem to have reached a wall and cannot see how to proceed.
Please help. Thanks.

Have you tried loading EMS via Admin Tools > Windows Powershell Modules? Amazingly, that will probably work fine for you.
Assuming that loads, or that you can run EMS on another machine:
Check Powershell directory in IIS on the problem server. Make sure SSL is not required. Allow only Anonymous access - no basic/IWA auth etc.
If you can get into Windows Powershell Modules, run the set-user command suggested above from there.
Remove-powershellvirtualdirectory, and then New-powershellvirtualdirectory (either remotely or using Windows Powershell Modules.
Re-check SSL/authentication once this is done.
-Max
Hi Max,
Tried loading EMS via Admin Tools > Windows Powershell Modules but didnt work. Got the following error:
Import-Module : There were errors in loading the format data file:
Microsoft.Exchange.Management.PowerShell.Setup, C:\Program Files\Microsoft\Exchange Server\V14\bin\Exchange.format.ps1x
ml : File skipped because it was already present from "Microsoft.Exchange.Management.PowerShell.E2010".
At line:24 char:34
+                     Import-Module <<<< $_.Name -ErrorAction SilentlyContinue
    + CategoryInfo          : InvalidOperation: (:) [Import-Module], RuntimeException
    + FullyQualifiedErrorId : FormatXmlUpateException,Microsoft.PowerShell.Commands.ImportModuleCommand
I think it is a problem with the PowerShell IIS VirtualDirectory because when i browse any other virtual directory i get a response of some sort but when i browse the PowerShell virtual directory i get the same 500 error message.
This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.
Now i think i have made things worse. I was looking at the remove and new point you made an accidently deleted the whole PowerShell virtual directory in IIS using the IIS GUI. I didnt use the Remove-powershellvirtualdirectory command. Now i dont know how to get it back :(
When i try to run New-powershellvirtualdirectory and specify to call it PowerShell it says it is already
New-PowerShellVirtualDirectory : The virtual directory 'PowerShell' already exists under 'DC01.mainserver/Default Web S
ite'.
Parameter name: VirtualDirectoryName
At line:1 char:31
+ New-PowerShellVirtualDirectory <<<<
    + CategoryInfo          : InvalidArgument: (DC01\PowerShell (Default Web Site):ADObjectId) [New-PowerShellVirtualD
   irectory], ArgumentException
    + FullyQualifiedErrorId : 7833EE63,Microsoft.Exchange.Management.SystemConfigurationTasks.NewPowerShellVirtualDire
   ctory
I have tried to use the remove command but it doesnt find it no matter what i put in the identify parameter. It should be "Default Web Site" right?
Anyways, i have created a new PowerShell virtual directory called ExchPowerShell (still would like to find a way have it called PowerShell) and removed SSL and enabled only Anonymous access. Now get a different error message:
VERBOSE: Connecting to DC01.mainserver
[dc01.mainserver] Connecting to remote server failed with the following error message : The WinRM client sent a request
to an HTTP server and got a response saying the requested HTTP URL was not available. This is usually returned by a HT
TP server that does not support the WS-Management protocol. For more information, see the about_Remote_Troubleshooting
Help topic.
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
   eption
    + FullyQualifiedErrorId : PSSessionOpenFailed
Did a search and i think this is because i now had a different PowerShell virtual directory so if i try to connect and specify the new virtual directory name i get the same error i was getting.
Failed to connect to any Exchange Server in the current site.
Please enter the Server FQDN where you want to connect: DC01.mainserver/ExchPowerShell
VERBOSE: Connecting to DC01.mainserver/ExchPowerShell
[dc01.mainserver] Connecting to remote server failed with the following error message : The WinRM client received an HT
TP server error status (500), but the remote service did not include any other information about the cause of the failu
re. For more information, see the about_Remote_Troubleshooting Help topic.
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
   eption
    + FullyQualifiedErrorId : PSSessionOpenFailed
Thank for all you help so far.

"waiting" and "system error" status cannot be resent in rwb?

Hi,gurus:
In RWB->MESSAGE MONITORING,I can't resend or cancel the messages with the status " waiting" and "system error".
when I clicked "resend" button,it asked for user and password.After I was authentificated,the system didn't resend a message. Have you ever met this issue?
By the way,I could resend the error messages before.
Thanks in advance.

Hi,
I checked the note 1233918,and it talked about the same issue.
But the solution is as follows,which I don't know what to do.(Our PI version is PI7.0 SR3 SP14)
Symptom
When the first message for a managed system is cancelled or resent, after pressing ok in the logon pop-up nothing happens - message is not resent or cancelled. The logon data is correct, since subsequent resend/ cancel works without further logon request. Another symptom is cancelling or resending a wrong message, when using the filter mechanism in the table. E.g. the table displays messages A, B, C, D. If message C is selected and after that the filter is set so that message C is hidden from the filter selection, when selecting message D and trying to resend/cancel it, message C is cancelled/resent (the hidden one, previously selected) and nothing is happening with message D.
Other terms
NWA, PI, Message monitoring, resend, cancel
Reason and Prerequisites
The UI Proxy connection was not obtained properly. Another reason - TableAccessories was not invalidating the nodes properly. Also after filtering the result list, resend/cancel was taking wrong message Ids.
Solution
For SP5 install LMNWABASICCOMP05P_1.SCA or higher patch level.
For SP6 install LMNWABASICCOMP06P_1.SCA or higher patch level.

Idoc Error: Could not find code page for receiving system

hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty

Idoc in status 03 - not received by receiving system

Hello All,
I have researched a lot on this topic on the forum - but what I am facing is something peculiar - so posting the complete scenario.
I have three interfaces based on change pointers mechanism where change pointers have been activated for message type HRMD_A.
There are three distribution models which filter the same message type and send to receiving system GIS – for the logical systems:
FI
Concur
Russia
When IDoc is triggered using standard program RHALESMD (transaction RE_RHALESMD - HR: Evaluate ALE Change Pointers), there could be three or less IDocs produced depending on the filter criteria.
For example, you could have an IDoc each for all above three partners.
When the above program is triggered in the development system all three IDocs reach GIS.
All the custom code and configuration is transported from DEv to QA. When I trigger the above program in QA, not all IDoc reaches GIS. Others stay in the system in status 03.
If I check tRFC queue (transaction BD75), there are no IDocs in the queue.
If I use another program to change status from 03 to 12, the status changes, but IDoc still does not reach receiving system.
I have compared Dev and QA systems, deleted and generated partner profile, distribution model, port in QA – but nothing works.
Not all IDocs reach GIS.
I read on the forum that I need a commit work. But because I am using a standard program - RHALESMD - where do I commit work?
Your inputs will be helpful.

Hi Suneel,
Please go to transaction SM58 and check if the IDocs are stucked up on the t-rfc queue. If so, you can right click and choose Execute LUW to release them.
or
Execute the program RSARFCRD and get the corresponding Transaction id and then execute the program RSARFCSE for processing the entries in TRFC Queue.
Regards,
Ferry Lianto

Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKA

You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

Error "could not find code page for receiving system"

Hello Everyone,
We are trying to load data and receive the message:
Could not find code page for receiving system
We have searched notes and this forum and can't find anything. We also checked WE20 and could not find anything wrong.
Can someone please elaborate specifically what this error is and where to fix it?
Thanks so much.
Colleen

I just upgraded to NW 2004 SR1, and when loading data from a non-unicoded R/3 system to our BW unicoded system I experienced the exact problem. Here is the resolution that is stated in note #613389 (it's not very clear in the note).
- Language EN must be specified in sm59
- Under Special Options -> RFC Bit Options
Make sure that Use Found Communication Code Page has a check mark.
Once this was done, the data loads started completing successfully.

HT1926 Attempting to update Itunes, received System Error: "program can't start because MSVCR80.dll is missing form computer" try reinstalling the program to fix problem. Question , if reinstall Itunes via download, do I lose my music library?

Attempting to update itunes, received system error" Program can't start because MSVCR80.dll is missing from computer, try reinstalling the program to fix the problem. Question, I can't access Itunes to backup library, how do I reinstall without loosing music library?

It doesn't matter and doing a manual install will not fix the problem either. I'm looking for a solution but no luck yet. I think Apple has given us a bad update.

Error status 51 in receiver system

Similar Messages

Maybe you are looking for